Error mesage (-48)

my downloads have stopped almost instantly because of error (-48)
what do i do to fix it!?!?

Hi
U can set an item validation, here u can get the amount of item and check if it's greater than net price
I think the code can be the same than yours, only the place is different: i.e it's useless an enhancement if a standard tool is available.
FI validation is usually made by functional so you can ask a little help from him: trx OB28
Max

Similar Messages

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

For general advice see Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?

How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?

The IOS5 upgrade will erase everything on your iPad, so make sure you have a good backup before you start.
If not, you will just have to reenter all of your settings all over again. Have you ever backed it up successfully?

Exception message 26, (only warnning not an error mesage).

Dear Experts
my environment is MTO, which generates a huge number of production orders daily with a big number of exception messages which some times are not enough to adopt the PP activities on the system,
in the case of (Procurement type:X) which the planned order for a HALB or FERT, material can be produced internally or procured externally, i can partially convert a part of the total quantity into a production order or a purchase requisition and so the remaining qty, into any of the both procurement proposals.
now if the total quantities of the partially converted production orders and purchase requisition, is exceeding than the planned order qty, i am getting the exception message 26, (only warnning not an error mesage).
my requirement: i want the system to restrict users to covert the planned order into a production order or a purchase requisition if the total quantities of all the partially converted production orders and purchase requisitions are exceeding more than the original planned order quantity.
Example:
planned order qty, is 10 EA, if i convert a qty, of 3 EA into a partial production order and another qty, with 4 EA into a purchase requisition,
system must restrict me to convert the remaining qty, into a production order or a purchase requisition if i changed the qty, to a qty, exceeds more than 3 EA.
Thanks in advance.

Ahmed,
Exception message 26 is neither a warning nor an error. It is an alert that a certain business condition exists (excess stock in a segment). The general rule for exceptions is that it is up to the planner to determine the significance, and to use your company's business rules to react accordingly.
The solution to your stated requirement does not exist in standard SAP. To me, it makes no sense to lock the system down in this way. Message 26 can come from overconversion, but it can also come if the requirements are reduced.
If you still feel that this functionality must be implemented, I would suggest this partial solution, that uses standard functionality. Have your planners perform only the conversions of the plndords to firmed purchase reqs, for a given time frame, all at one time, and decline to convert the remaining balances to production orders. Then, re-run MRP with delete/recreate. This will create planned orders for exactly the balance(s) required. Then, you could immediately use the standard mass program to convert the 'balance' Planned orders to Production orders. The mass conversion could be the second step of an auxiliary MRP job.
If you insist that the requirements must be met using the method you indicated above, then it implies that every program that could be used to convert a PlndOrd to something else must be modified. I don't think I would attempt this unless there were no other possibilities.
Best Regards,
DB49

Error Mesage is "Could not reserve record (2 tries) keep trying ?

sir,
when i running my form i m reciving this error message Error Mesage is "Could not reserve record (2 tries) keep trying ? " This is due to multi user Login, How can i avoaid from this error message.

when you begin changing queried values, forms locks the record for other users by default. so this message appears if another user tries to change (lock) the same record. you have to wait until the locked record is commited or rolled back.

Always pop-up error mesage when i run the cd-rom program

Always pop-up error mesage when i run the cd-rom program - Macromedia Projector發生問題，必須關閉，謹此致歉

You need to disable "Autoplay" for your CD drive. In the Control Panel under Hardware.

HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW: The operation couldn't be completed. (OSStatus error -61.)

HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW: The operation couldn’t be completed. (OSStatus error -61.)

Hello,
I believe the issue was the external HD I purchased was not formatted for Mac . . . once I took care of that - all went well! The slide show transferred and the surprise 70th birthday party was a huge sucess. Thank you everyone!

Ipod itunes error mesage we are unable to continue with your activation

ipod itunes error mesage we are unable to continue with your activation

Are you getting this error? If so have you waited or contacted Apple?
Apple - Support - iPod touch - Contact Us

Has any one encountered a problem renting Movies and getting an error mesage (-42110)?

Has anyone encountered a problem renting moives and getting an error mesage (-42110) and movies won't play?

Hello there, rainman214.
The following Knowledge Base article offers up information on your exact error message. It's found in the section entitled: "Specific Conditions and Alert Messages: (Mac OS X / Windows)":
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 3001," "-42110," or "5103"
This alert is related to iTunes Store movie rentals and authorization issues.
Make sure you are using the most recent version of iTunes and QuickTime. They both can be downloaded free of charge.
If your iTunes is up to date, remove the SC Info folder.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Error Mesage (Yield Qty + ScraP qty)

Greetings..
i created order with qty as 10. during confiramtion in co11, when i enterd for first opeartion yeild qty as 10 and rework qty as 1, then i am gettting error overdelivery not allowed.
Means Yeild qty + rework Qty gretaer than Planed qty errror mesage comes .
Now i want to carry the same message when i enter 10 qty as yeild and 1 qty as scrap.
How to get this mesage when yeild qty + scrap qty greater than planned qty.

Dear,
In OPk4 - Define confirmation parameter, select your palnt & Order type. Select 1st tab page, select Over delivery - Error message if over delivery.
So system will give error message if over delivery.
In material master work scheduling view enter Over delivery tolerance if required.
You can do it with the Transaction: OPJB: Change the Message Type for RU117 from W to E.
Regards,
R.Brahmankar

I have uninstalled and reinstalled the new iTunes but it still will not work. I keep getting the error mesage relating to MSVCR80.dll, the installation error 7 (windows error 126). I have tried moving and removing the dll files including the QTMovie dll

I have tried uninstalling and reinstalling iTunes 15 times regarding the latest release and still get the MSVCR80.dll and Error 7 (Windows error 126) messages.
I have tried moving the dll filesincluding the QTMovie dll file to now avail. Can anyone please help, as I am sure you all, like me, have thousnads of dollars and songs invested in this system and need a fix fast. Can anyone please help???

Dear avid iTunes users - I have cracked it!!!
The response from Apple/iTunes was extremely poor and did not solve the problem.
I have a look in msconfig and observed which applications/services were running - one of which was the 'Apple Application Support'
So ... I had a look at what was in this folder and found the APS Daemon.exe file causing all the trouble.
So ... I simply deleted the Apple folder found in C:\program files\common files\.
I did a restart and did not get the MSCVCR80.dll or Error 7 (windows 126) error messages.
I reinstalled the current version of iTunes (for the 16th time!)
Hey presto!!!
IT WORKED :-O Woooohooo!!!
So ... to all those smarty-pants boffin-brianiacs out there (apple/iTunes): this is how you do it!!!!!!!!!!
YOU DO NOT NEED TO UNINSTALL ALL THE APPLE/QUICKTIME OR RELATED PROGRAMS - JUST DELETE THE APPLE FOLDER IN THE C:\PROGRAM FILES DIRECTORY.
Nuff said.

HT1386 I repeatedly receive an error mesage when trying to sync my ipod touch with my new computer, "some of the items in the itunes library, were not copied to the ipod because you are not authorized for them on this computer." My computer is authorized

I repeatedly receive an error message when trying to sync my ipod touch with my itunes library with my new computer which reads, "Some of the items in the itunes library were not copied to the ipod because you are not authorized on this computer." However when I try and authorize my computer I always receive the message that this computer is authorized. What am I doing wrong? I'm missing about 100 songs as a result of this error!!

See:
iTunes Store: About authorization and deauthorization
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
Could the items be purchased by another account?

I get an error mesage -50 everytime I try to sync my IPad and PC. Can anyone help me solve this problem?

Everytime I try to sync my Ipad with my PC I get an unknown error message number -50? Can anyone help me?

this may be related: http://support.apple.com/kb/ts1539

Error mesage when trying to load songs onto ipod, computer is authorized

my husband and I have 2 different user IDs on vista and when I tried to load some songs from our public itunes directory onto his ipod, an error pops up saying this computer is not authorized to play these songs. When I try to authorize the computer in the itunes store it says, computer already authorized but I continue to get the error. I logged out of my account and back in but it still isn't working. Now when I tried to sync my iphone under my user id on the laptop I'm getting the error message that the computer is not authorized so it can't sync my iphone apps. It worked fine a week ago, this is not a new computer.

I have the exact same problem, meaning I have to reinstall a game I bought in iTtunes Store every time I plug in my iPod.
I just tried the signing out, restart, signing in proces, but it didn't work for me.. any other suggestions how to solve this?
I've been experiencing this problem ever since I updated itunes to 8.1, and even now after updated to 8.2 it's still the same..

Error mesage when trying to download

I have just purchased a new iMac and have transferred all of my files, settings, etc from my old computer via Time Machine. The only thing that does not seem to work is my inability to download from the internet. When I try, I get the following error message: "Users/user name/downloads/WXHCDUxg.dmg.part could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location."
How do I get this to work?
Norm

Are you certain this is for the same Downloads folder mentioned in the "Users/user name/downloads/WXHCDUxg.dmg.part" error message?
For instance, if you are downloading through Safari, in its General preferences tab, reselect your Downloads folder in the "Save downloaded files to" popup by selecting "Other" & then navigating to it.

I just reinstalled iTunes and can't get it to open; error mesage says it can't find the files so without a program it won't even sync my phone.

I'm getting this error message "the iTunes library itl cannot be read because it was created by a newer version of iTunes. When I've tried to redownload it, nothing happens.

Try the following:
- A reset and then connect to your computer and try to restore.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- See if placing the iPod in Recovery Mode will allow a restore.
- The see if DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If you can't turn the iPod full off, let the battery fully drain. After charging for at least a hour try the above again
- If still not successful time for an appointment at the Genius Bar of an Apple store.

Error mesage (-48)

Similar Messages

Maybe you are looking for