Error message after installing external zip drive

After installing a replacement zip drive (and accompanying software from CD), I'm confronted with a periodic error message advising that hardware has not been closed properly disk ejected prior to removal? I'm not removing anything--the zip disk is remaining in the external drive. I've turned off all power, rebooted and reinserted USB connections and the error message keeps coming up periodically. Iomega web site isn't much help. An suggestions, please. Thanks.

Thanks for your quick reply!  I was wondering if anyone would reply!
I made the copies on a suggetion that the original may be scratched or something so I figured what the heck?  I did format the hard drive though.  It is a Seagate 500gb hard drive.  I only formatted the whole drive and figured that the restore disks would make the additional partition.
Aside from that, it's the same error message that I had on the original drive.  The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean.  What can be causing the error message, and what IS the error message?
Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
Thanks again for replying!

Similar Messages

  • Help! Still get error message after installing new hard drive

    The original problem is below and thought that it would help to include it to see the initial problem.
    I went out and bought a new hard drive (500gb) and installed it in my laptop.  I went to use the restore disks and I got the same exact error mentioned below.  I used a set of disks that I copied from the original recovery disk and it still did the same.  What is the error code and how can I fix this!!
    Please help!!
    I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error:  ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
    Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message.  All the files are accesible on the CD and I have no virus' on my computer.
    Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer".  You can however see it when I go to "Administrative Tools-Computer Management."  It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.

    Thanks for your quick reply!  I was wondering if anyone would reply!
    I made the copies on a suggetion that the original may be scratched or something so I figured what the heck?  I did format the hard drive though.  It is a Seagate 500gb hard drive.  I only formatted the whole drive and figured that the restore disks would make the additional partition.
    Aside from that, it's the same error message that I had on the original drive.  The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean.  What can be causing the error message, and what IS the error message?
    Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
    Thanks again for replying!

  • TS1717 I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    Hi pholewinski!
    I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Error message after installing NICAN 2.1.3 driver

    Sorry for this second message but I wanted to translate it in english which seems to be the common language on this forum.
    After installation of Nican driver, shuting down computer, insertion of NI serie 1 PCI card, and turning ON computer, windows try to install NI driver but fail to install it completely.
    I've an message saying that "an error occured during the installation. Specified file has not been found"
    If clic on Terminate, windows try again to install the NI driver and fails again.
    strangely, MAX autotest pass succesfully, and my application works correctly with NI CARD.
    How could I complete installation in order to not having constantly the popup saying that installation failed ?

    This sounds like a registry problem. Some times a deinstallation or upgrade of NI drivers deletes a special registry key called RunOnce.
    The result is the problem you wrote about.
    Check in your registry for the following key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce
    If you could not find the RunOnce key, you have to create this one.
    good luck

  • Error Message after installing Photoshop & Illustrator (CS2) on new iMac

    When I launch Illustrator or Photoshop (both CS2) on my new iMac 2.8 GHz, I get the error message: "Connection Failed. server may not exist or is not operational at this time. Check the server name or IP address and your network connection and try again."
    I click OK and they open, but this behavior is getting OLD. I've uninstalled and re-installed and I continue to get the error every time I open these applications. It only happens with Illustrator and Photoshop. I'm in the process of transferring all my files and apps from my old G4 which is connected via ethernet. I've de-activated and removed the old copies on the G4. Does anyone know what is causing this error message and how I can remedy the situation? Thanks for your help.
    (24" 2.*GHz Core 2 Duo iMac / OS 10.5.6 / 2 GB memory)

    I've just done almost exactly this. Moved to a brand new imac runnning Leopard, (but I've got the newer model imac - 4Gb, 2.93 Ghz 10.5.6) and not yet bought CS4.
    I installed both Illustrator and Photoshop CS2 from the disc (migrating didn't work, suprise suprise so I just wiped everything off and started with a clean install) but both still refused to start until I'd repaired permissions. After I did that it worked fine.
    Even using Rosetta, Photoshop CS2 seems to be faster than on the G5 imac I've just replaced (especially using an external firewire 800 drive as a scratch disc). And no apparent bugs so far.

  • Error Messages After Installing Leopard 2

    After installing Leopard from the Install DVD, I used Software Update to update to 10.5.1, and updated QuickTime, etc. I also ran Cocktail, the Leopard edition. The Hard Drive checked out OK. When I ran Repair Permissions in Disk Utility, I got a number of error messages. One set starts like this: "Warning SUID file "System/Library/Private Frameworks/DiskManagement.framework/Versions/A/Resources/DiskManagementTool" has been modified and will not be repaired."
    There are a number of messages like this. What shall I do?

    Download and install this update, even though you've already updated.
    (26492)

  • Anyone getting this pop up error message after installing Lion?

    After installing Lion I now get random pop up error messages that say...There was a problem connecting to the server. URL's with the type "file" are not supported. I have to keep closing them. Any ideas what to do?

    Actually, In my case, turning off Time Machine didn't help. I had the same problem. We definitely traced it to Time Machine. The "Fix" was this: plugged in and designated different external HD as Backup volume. Then unplugged it and plugged in the original disc (after testing in in a different machine) and now the computer recognized it and error message stopped popping up. The Apple tech was as puzzled as I as to why this worked, but perhaps, forcing the machine to re-recognize it (or maybe even gettting it recognized by a different machine first) somehow worked some magic.

  • Why do I get a "driver conflict detected" message after installing the latest driver.

    I have been having problems displaying print ink levels.  So, I decided to run the latest Print and Scan Doctor software.  Sure enough the diagnostic detected a driver problem and displayed a message "Driver Conflict Detected".  So, following instructions, the driver was uninstalled and new software was installed using the latest full driver and other software install.  After this was completed, the diagnostic was run again, guess what, same message.  The next timeI installed just the driver install package.  The diagnostic was again run.  Guess what, same error.  Well, after a couple of hours trying to find a different driver for a Windows 7 64 bit machine and looking for a different uninstall program, I have given up.  Oh, the other problem is repeated "offline" messages on my wife WIFI connection to the printer. Neither problem has been corrected.   Does anyone have a solution?  
    Thanks - 
    This question was solved.
    View Solution.

    Yeah as long as the functionality is there for you I wouldn't worry about the message. 
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Error message after installing 10.8.2 update

    After installing the osx 10.8.2 update the mok resrtarts and give a error message: "the update could no be installed" or so. As I look up in the system info the update appears al isnatlled. Why?

    I'm another user with same issue, started right after the upgrade, appears consistently with login/out, sleep/wake, rarely otherwise. 
    ? some launchd process calling usereventagent which then crashes
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFNumber length]: unrecognized selector sent to instance 0x5088002c7'
    abort() called
    terminate called throwing an exception
    This is on a 2.66 GHz Quad-Core Xeon.  No similar issue with my Air which I also upgraded to 10.8.2, so I suspect it's a launchd process installed by something which I and others have added that gets run at login and logout (and less frequently at other times).

  • Adobe reader has stopped working error message after installing reader XI on windows 7

    Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
    Does anybody know why ?

    Dear Pat,
    Thank you for your reply.
    It is Ver. 11.0.06 for Acrobat XI
    No, I can't open the Reader at all.  The error message box popped up immediately when I run the Reader

  • Error Messages After Installing Leopard

    I did a clean Install of OS X Leopard on the new iMac I got yesterday (see specs below). Then, I used Setup Assistant to bring over my user folder, Applications, etc. I got the error message, "Errors and Warnings:
    - Some files from "Search Index 00D540F3-0AF4-43EC-8C13-82EFF4AB5B9F.txt" could not be transferred"
    I don't know what this means. Please explain, someone.

    It means that the spotlight index from the original installation wasn't copied. Let Spotlight reindex the drive and you'll be fine.

  • Error Messages after Instaling 10.6.2

    After installing !0.6.2 I get the following error messages--System extension cannot be used. The system extension"/System/Library/Extensions/hpPluginInit.kext" was installed improperly and cannot be used.Please try reinstalling it or contact the products's vendor for an update --- Second Message---System extension cannot be used.The system extension"System/Library/Extensions/CDSDAudioCaptureSupport.Kext" was installed improperly and cannot be used. Please try reinstallingit or contact the products vendor for a update,
    Every thing appears to be operating OK.Should I delete the extesions or what repair should I implement to correct the problem
    Thanks A Lot For Your Help

    Trying to update with the latest drivers didn't do me any good.
    HP has the worst software and horrible update instructions.
    This is the page that purports to having the latest for snowleopard
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadInst?swfsequence=1&lc=en&dlc= en&cc=us&lang=en&softwareitem=oj-74786-1&os=219&product=3737195
    I found I had to specifically delete the offending file "hpPlugInInit.kext" before I no longer received that error message.
    HP also has this firmware update:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-71331-1 &lc=en&dlc=en&cc=us&lang=en&os=219&product=3737195
    There are no instructions telling me if this has or has not been included in my printer.
    I'm guessing at the instructions, and I'm going to run the program. But who know at the success.
    I'm never buying another HP anything. Especially if Apple offers me a "deal" on it.

  • Error message after installing CS6

    After installing CS6 from disk error message said, "Some items for the following product(s) could not be installed successfully." The message then listed five of the eight applications in CS6. I can't find any info about where to go to identify and resolve the issue. Please advise.

    Check the install logs for errors and then use the below link to troubleshoot accordingly.
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
    Installer Log Locations:
    mac: /Library/Logs/Adobe/Installers/[Adobe Application name<date>].log.gz
    win: c:\Program Files\CommonFiles\Adobe\Installers\[Adobe Application name<date>].log.gz

  • Error message after installing latest FlashPlayerPlugin

    After installing FlashPlayerPlugin_11_9_900_117.exe with the downloaded install file install_flashplayer11x32_mssd_aih.exe when I open Firefox and go to another tab I get this error message:
    The exception unknown software exception (0xc0000710) occurred in the application at location 0x.......... (this is different each time) Click OK to terminate the program.
    I do this and everything seems to work OK but I keep getting the error message each time I open Frirefox and move to different pages.
    What can I do to fix this problem?

    Hi - I've just uninstalled Flash Player 11.9 and installed archived version 11.8.800.168 as advised in your FixNow Support. At 72 years of age I find having to put things like this right on my laptop is usually most confusing,
    but it has solved the problem simply and easily!
    Thank you so much!

  • Error message after installing iTunes 8.1 plc help

    After have installed iTunes I get an error message saying: The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "My Music" folder.
    Now I've tried to creat the folder manually, but that doesn't work either
    have any of you had this problem too?
    I've tried removing it and re-installing iTunes 15 times...

    In XP, this us usually caused by a registry problem, See:
    http://support.apple.com/kb/HT1866
    Sometimes My music does not show up in TweakUI. If that happens see:
    http://discussions.apple.com/thread.jspa?messageID=1731188&#1731188
    But be careful it involves editing the registry.
    If iTunes installed, you may be able to work round this with a shift key start.
    Hold down the shift key and start iTunes. Keep holding the shift key until you are prompted to choose or create a library
    If you already have an iTunes folder containing a library, navigate to it and choose iTunes Library.itl. Otherwise create a library in My Music.
    (the shift key is the one that makes upper case letters)

Maybe you are looking for

  • How to print the properties in an object

    I have the following method that is meant to print all the details in a hashmap (allStudents). this hashmap contains references to objects of different students. what i need is to be able to print each object stored in allStudents, and each of those

  • Net results not apearing in Financial statement

    Hi We have created a Financial statement verion (FSV) in FSE2 and assigned in a report painter Balance sheet report (FSI5). The issue is the "Net Profit" is not displayed in the report painter report. Its showing in F.01. Thanks

  • Ajax in Sharepoint 2013 Sandboxed solution

    I want to use ajax in sandboxed solution for sharepoint 2013,is it possible we can use ajax in sandboxed solution ? if yes  then please me know the steps to implement ajax in sandboxed solution for sharepoint 2013. if we cannot use ajax in sandboxed

  • Cannot load itunes for windows

    I cannot load itunes for windows Can you help me?

  • IPhone4 is not full recharged but showing "unplugged" (fully recharged) icon

    Help please --- recently, when I connect my iPhone4 to the charger, it usually (70%) shows the "unplugged" (fully recharged) icon but I find it is actually recharging (but very very slow) When I use the same cable and connect to the PC, no such probl