Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Similar Messages

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • This message recently popped up on my PC - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." What does this mean and how to fix ??

    Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC

    Hi B, thanks so much for helping me troubleshoot !!
    Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
    * Sound Playback Default Device = No Playback Devices.
    * Sound Recording Default Device = No Playback Devices.
    * MIDI Music Playback Default Device = No MIDI Playback Devices.
    All text in this drop-down box were light grey, and therefore unable to be selected or altered.
    I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
    Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
    Thanks again,
    Shell

  • Itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly

    I cant copy the music from itune library to iphone. Message "itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly" I unistalled the itune from the pc and download the itune again but still same message come up.

    I'm having the same problem.  I have downloaded Itunes again but still the same problem.

  • ITunes has detected a problem with your audio configuration.Audio/video playback may not operate properly. Help please.

    I haven't used itunes here much just been playing the songs I had on it. Now i downloaded some more songs i plugged in my Ipod touch and it's not showing up and giving me the message above (Itunes has detected a problem with you audio configuration. Audio/video playback may not operate properly. I uninstalled Itunes and quicktime restarted computer and still the same thing. What is going on?

    Try reinstalling QuickTime, as this article suggests
    http://docs.info.apple.com/article.html?artnum=304424
    Other people have had luck with deleting their QT rpeferences file:
    C:\Documents and Settings\username\Local Settings\Application Data\Apple Computer\QuickTime\QuickTime.qtp

  • When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly

    When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly. I removed some unused programs from my pc before this happened and I think I may have removed something I shouldn't have.

    I had this same problem and my sixteen year old figured it out. Since the Windows PC running iTunes (which supports a housefull of AppleTVs) was running in a closet, he suspected it was due to having no speakers attached.
    Sure enough, when I went into control panel to look at my sound settings, I noticed something I had missed previously. There was a red mark on the device. I took his advice and plugged in some earphones to the speaker jack and, wallah, the red mark turned green and the iTunes warning never popped up again.

  • HT1199 cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can anyone help. Cheers Wade Johnson

    Cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration.
    Audio/Video playback may not operate properly.
    Cheers
    Wade Lawrence

    Hello Wade,
    This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Resolution
    QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    Cheers,
    Allen

  • When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

    When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect  earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • When I go to open Itunes I get a message that says "Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly.

    When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • "iTune's has detected a problem with your audio configuration. Audio/Video playback may not operate properly"

    I have iTunes 10.7 on Windows 7 and I need this so I can update my library before the iPhone 5 arrives! Any ideas???
    Much Thanks!
    -Alan

    I had this same problem and my sixteen year old figured it out. Since the Windows PC running iTunes (which supports a housefull of AppleTVs) was running in a closet, he suspected it was due to having no speakers attached.
    Sure enough, when I went into control panel to look at my sound settings, I noticed something I had missed previously. There was a red mark on the device. I took his advice and plugged in some earphones to the speaker jack and, wallah, the red mark turned green and the iTunes warning never popped up again.

  • HT1369 I am being told i-tunes has detected a problem with your audi configuration. Audio/Video playback may not operate properly". I HAVE CHECKED THAT  MY INTEGRATED AMPLIFIER IS WORKING WITH THE LEAD THAT HAS ALWAYS WORKED FROM THE COMPUTER.What should

    I am not having any trouble with my i-pod which I can continue to connect to the computer to update. However when I get into the listen to the music on the computer I am unable to hear anything. This is also true for Spotify, and my own cd's inserted in the computer and i-player. I have connected an old Sony Discman to my amplifier and it works perfectly, so I know that the problem is not with the amplifier or the lead so it must be the computer audio.
    My computer is a COMPAQ CQ 1140UK SLIMLINE DESKTOP PC.
    I need to stress that I am a 65 year old non tech user. I use my computer a lot but have no idea how it works!! .
    I believe that in my efforts to resolve this issue myself by going into the control panel .....I may have caused even mor problems.
    At first, today, I could see that the track was playing, CURSOR MOVING ACROSS THE TRACK LINE, but I was getting no sound....now the tracks don't even seem to be playing at all!!
    I remember, afew days ago seeing something flash up on Spotify about how it was going to do something with my i-tunes but it stated that it was nothing to worry about!   So I didn't, until today!!
    I only used Spotify to locate a track before I purchased it through i-tunes.
    If anybody could advise me of what I could do to resolve this problem then I'd be most grateful.
    This is my first time on this Apple Support Community so I hope that I am right in thinking that any response will arrive in my e-mail.
    Thanks again
    grahamholly

    It might be worth trying a dxdiag to see if that finds anything amiss, michael.
    Go Start > Run. In your Run, type dxdiag and hit enter.
    Work through the troubleshooting tabs. Does dxdiag report any problems?

  • ITunes has detected a problem with your audio configuration, audio/video

    When i open iTunes i recieve a message saying "iTunes has detected a problem with your audio configuration, audion/video playback may no operate properly." iTunes opens fine after i click ok on the message. However when i push play to hear a song nothing happens, the time for the song remains at zero's.

    This error can be caused by a bad installation of QuickTime. Remove iTunes and QuickTime, and reinstall iTunes (which will reinstall QuickTime). You can find the steps to remove and reinstall near the bottom of this article in the Apple knowledege base.

  • After upgrade to iTunes 11 "iTunes has detected a problem with your audio configuration"

    After upgrading to iTunes 11 I have lost all sound on my PC running Windows XP.  When I try to open iTunes I get the following message: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  I have also lost sound when I attempt to listen to audio from a Website while in a browser session.  I notice I have also lost the volume setting icon from the system tray in the lower right corner of the screen.
    Please advise.

    Something went wrong during the upgrade to iTunes 11.  I have lost audio on my desktop PC running Windows XP.  No sound in iTunes: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  No sound during browser sessions.  The volume control icon disappeared from the system tray in the lower right corner of the screen.
    It seems that an audio driver(s) were damaged or deleted.  When I go into the Control Panel and check the reading for the audio hardware, the entry for the DVD/CD-ROM drive says:
    "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
    Click Troubleshoot to start the troubleshooter for this device."
    Please advise.

  • Error message -ITunes has detected a problem with your audio config...HELP

    error message - itunes has detected a problem with your audio configuration. audio/video playback may not operate properly...
    ive gone through the itunes support steps such as reinstalling quicktime and itunes and nothing seems to work... itunes still open...but then nothing plays...please help me

    I've cobbled together a few ideas courtesy of some posts made by the inimitable b noir concerning this particular problem .
    First ...
    ... let's try swapping out your QuickTime, taking a few additional explicit precautions this time.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
    Next ...
    If you're still getting the message with a fresh quicktime in place, let's check to see if something is awry with your sound card.
    Open your "Sounds and Audio Devices" control panel. Click the "Audio" tab. Is the correct default device showing up in the "Sound Playback" area?

  • Itunes has detected a problem with your audio configuration. audio video playback

    itunes has detected a problem with your audio configuration. audio video playback may not operate properly. Why do i get this after update cant get sound now please help!

    See if this article will help:
    iTunes for Windows plays video files without any audio
    http://support.apple.com/kb/TS1696

Maybe you are looking for

  • Naming a file in the adapter module

    Hi All, I have written an adapter module that is used in a receiver mail adapter. In my module I am renaming the attachment name to "abc.cpi". The problem is I am getting the output from the adapter as abc.cpi.xml. I tried changing the content type i

  • How do I re-save an Illustrator file to an older version if I can't open the current file.

    How do I re-save an Illustrator file back to an older version, if I can't open the file because I don't have the newer version it was created in (besides the obvious of purchasing the newer version).

  • Photoshop CS2 upgrade?

    I just upgraded my Mac OSX.4 to OSX.6, since my Outlook email program told me my browser was outdated.  What a headache!  Had to back everything up, then couldn't reinstall my Photoshop CS2.  (Anyone remember the good old days when they made things t

  • Snow Leopard and Aperture 2.1

    I recently upgraded to Snow Leopard and quickly learned that it would not support my Aperture 2.1. What can I do? Thanks

  • Dolby DIGITAL(AC-3)

    Dolby DIGITAL(AC-3)? Hello everyone I have been happily using CL products for many years, with 2 speakers. Recently I was given a Sherwood R-925 Audio/Video Reciever. From having a read of its manual it appears it will accept both optical and coaxial