Error message appears when I turn on my computer, help please!

When I start my computer this message appears "Failed to initialize Main Window Error HRESULT E_fail has been returned from a call to a COM component".
I just started and I have no idea what to do about it!
Also, my Microsoft office is not working (all started at the same time) and this message appears when I open MS Word, Excel, etc. and when I click OK,
it closes automatically " Microsoft Office Home and Student 2010 cannot verify the license for this product. You should repair the Office program by using the Control Panel. I have tried to repair it and have un-installed and re-installed
it.
Any help is much appreciated!

Hi,
I suggest you perform a startup repair to fix this start issue, please refer to this link
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
For the office issue, here are some workarounds, check if it can help you
http://helpdeskgeek.com/office-tips/fix-office-2010-cannot-verify-license-error-message/
And you can get more professional suggestions in this forum
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Similar Messages

Error message appears when trying to start server in VM Manager

Error message appears when trying to start server in VM Manager
OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
When trying to restart server:
OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

The following error message appears when I try to create a PDF in Publisher:

The following error message appears when I try to create a PDF in Publisher:
PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
I have tried update patches to no avail.
Can anyone please help?
Thank you.
Susan

Hello Michael,
My version of Publisher is 2010 and my OS is Windows 8.1.
64-bit OS x64 based processor.
I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
Thank you for taking the time to view my request.
Kind regards,
Susan

TS2570 How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the loadbar thn

How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the load bar then shutdown?????

Hello, what OSX version?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

Error message appears when selecting emailed link but there's no problem

I upgraded to Firefox 7.0.1. Now, when I select an emailed link to a website, I always receive a General Failure error message indicating that Firefox can't reach the website. In the meantime, the thin red-light progress line appears and the website comes up fine. Thee error message appears consistently but there's rarely a problem reaching a website. Any suggestions on how to eliminate the error message?

I'm responding to my own post. I checked the error messages more carefully and found that they are Microsoft Outlook generated and not Firefox. This could still be a Firefox problem but I thought I should point this out.
Bob

Error message appear when I compile the HelloWorldImp.c in JNI tutorial

I have followed the JNI tutorial to study JNI.
When I followed 'Step 5: Create a Shared Library' to compile the HelloWorldImp.c, following error message appears:
$gcc -g -I/usr/local/java/include -I/usr/local/java/include/solaris \
HelloWorldImp.c -o libhello.so
/usr/lib/gcc-lib/i386-redhat-linux/2.96/../../../crt1.o: In function `_start':
/usr/lib/gcc-lib/i386-redhat-linux/2.96/../../../crt1.o(.text+0x18):undefined reference to `main'
collect2: ld return 1 exit status
What's the problem?

gcc was trying to link your code into a runnable application. This is the default behaviour. Hence, it was looking for main() which is the entry point in a c/c++ application. By telling gcc to compile a shared library instead, with the -shared option, the linker did not try to produce a runnable program, and hence (that two hence's now, sorry) did not look for the main() function. Therefore (this is getting too formal!), there is no need to provide a main() function in a shared library.

PC crashed. Attempted to install NEW copy of Elements 10 that I had in reserve. Always get ERROR MESSAGE 400 when trying to open the program. Please advise how I get around this error.

My PC crashed. I rebuilt it from scratch and tried to install my unopened copy of Elements 10. I get error message 400 when trying to open the program. Windows 8.1 64bit

if that's a network connection error, Sign in, activation, or connection errors | CC, CS6, CS5.5

HT201210 I am getting an error message 3014 when trying to restore my iPad, help?

I am getting an error message #3014 when I try to restore my ipad from the new itunes. I also just downloaded and installed osx. help?

http://lmgtfy.com/?q=iPhone+error+code+2003

Error message after i try run itunes...help please!

Every time i try to download the most recent version of itunes, it finishes with no problems but after it finishes i press run and then an error message appears and its a long message starting with C:/Documents and settings...and at the end of the error message it says "this is not a valid Win32 application." What should i do?

go to
http://www.computerhope.com/issues/ch000726.htm
it has some tips that might help.
hope you get things worked out.

Error message appears when lesson loads from LMS

After I successfully loaded my first lesson into Syntrio LMS
and launching the lesson for the first time, there are multiple
error messages that appear in a new IE window. At first, the
browser wouldn't load the lesson unless the pop-up blocker was
turned off, but after I turned the pop-up blocker off a new window
would open displaying different errors. It happened at the very
beginning of the lesson after clicking on the "start" button on the
first slide. Then it happened randomly when clicking on other
buttons throughout the lesson, and after every quiz question. I
have copied the errror message that is being displayed.
error=0
error_text=Successful
aicc_data=[core]
STUDENT_NAME=Jarred Grant
STUDENT_ID=400
Lesson_Location=
credit=N
version=3.0
score=0
time=00:00:00
This would display while taking the quiz at the end of the
lesson:
error=0
error_text=Successful
version=2.1
Our tech support at Syntrio said it's an error with the
Captivate settings, but after going through and checking the
reporting options, it seems to be set correctly. If anybody has
encountered this error before, please provide any insight as to
what I am missing here. It is my first time building an eLearning
project so any and all help is greatly appreciated.

jarredg,
The reason you are seeing those new browser windows, is
because your
Captivate content is not hosted in the same domain as your
LMS. There are
security restrictions in the Flash Player that prevent
HTTP-POST from
occuring from a Flash file to [in this case] an LMS that
resides on a
different domain. The issue (and potential solutions) are
described here:
http://www.adobe.com/devnet/captivate/articles/output_aicc_04.html#cdc
Regards,
Andrew

Error message appears when attempting to access apps = server connnection error -1.

photosmart 6510, operating on a Mac computer. Error message occurs on product screen. all network and wireless connections appear good. no new product updates available. The apps function was previously working OK until last 2 weeks

Hello,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
Once that is done make sure to turn the printer off and back on and try the apps again. If you are still having trouble, try turning off your router and the printer. Turn the router back on first, and leave the printer off untill the router looks like it is stable. Once the router is stable, turn the printer on and try the apps.
If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Error message appears when trying to open recently updated itunes

Updated to newest Itunes...when i try to open i get this error message and it won't open:
An unhandled win32 exception occurred in iTunes.exe [1564]. Just-In Time debugging this exception failed with the following error: No installed debugger has Just-In -Time debugging enabled. In Visual Studio,Just-In -Time debugging can be enabled from Tools/Option/Debugging/Just-In-Time. Check the documentation index for "just-in-time, errors' for more information

Message numbers in the 13000 range are usually do to a problem with Genius. I have seen 2 totally different fixes posted here in the forums. edit - Sounds like you already tried method 1.
*Method 1*
Rename these files, or delete them
iTunes Library Genius.itdb
iTunes Library Extras.itdb
Try opening iTunes again. And turn off Genius as fast as you can. You can turn it back on later, but first get iTunes running.
*Method 2*
Go to Control Panel > Add/Remove Programs
Choose iTunes, press the Change button and then the repair button.
Message was edited by: Katrina S.

Gneral:system error message appears when I try to ...

when try to open any music songs I put in N95 8g even that songs come with N95 8g this message appear >>gneral:system error
what I can do??

Hi tito_6646,
Just saw this thread. You can try to perform a restore to factory default (I believe this is what lupos0_1 meant), which should be available under the Menu, Tools, Settings, Phone, General, Orig. phone settings.
If this doesn't help, you can try and format your N95 8GB. This can be done via the following steps:
1. Off your N95 8GB.
2. Press the buttons *, 3 and the call.
3. While holding the above buttons, power on your N95 8GB.
4. Do not release the buttons until you see the message "Formatting". (Note that I own a N80, which doesn't prompt me this message, though I read that it does on N95 8GB.)
WARNING: This method will wipe out your data and applications on your N95 8GB, so do backup your data and be prepared to reinstall your applications.
Hope this helps. Let us know.
To All: Can anyone advise if the internal 8GB will be wiped out via the Format/Hard-reset operation? In addition, anyone know on how to backup the activiation code for the Spiderman 3 movie?
Cheers.

Error message appears when downloading bought videos.

There is an error message that appears right when i click to download the movie. It says There is a problem downloading "movie". The disk your attempting to use is full. Please delete some files or empty recycle bin. I emptied recycle bin and is still not letting me download it. Please help.

Hi,
I suggest you perform a startup repair to fix this start issue, please refer to this link
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
For the office issue, here are some workarounds, check if it can help you
http://helpdeskgeek.com/office-tips/fix-office-2010-cannot-verify-license-error-message/
And you can get more professional suggestions in this forum
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Error message appears when I turn on my computer, help please!

Similar Messages

Maybe you are looking for