Error message:  AVCFPlayerAppliesMediaSelectionAutomaticallyKey could not be found in AV FoundationCF.dll.

I have repeatedly unistalled and reinstalled iTunes and quicktime to only received the same error code:  AVCFPlayerApliesMediaSelectionAutomaticallyKey could not....etc.  I have been searching and doing this since November 2013.  There must be a way to get it to work.  I have a PC operating on Window 7.   I have no problem on the MAC, but I'm a PC girl. 
I was getting the apple application error, but I managed to get that installed. 
Yes, I have gone into the control panel to repair the issue, but that too didn't work.

I rebooted, reinstalled, rebooted and received the error code: Apple application support (error 2). Of all items deleted the only one that installed was iTunes. No bonjour, etc.
Okay ... let's try installing the other components standalone.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder:
Doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
Doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
Doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.
Do those all go through okay? If so, can you get iTunes to launch without the error messages?

Similar Messages

  • I recently upgraded computer to windows 7.  When I open itunes I am able to see my music library, but unable to play.  Gives an error message of "Could not be found".  How do I retrieve my library contents?

    I recently upgraded computer to Windows 7.  When I open itunes I am able to see my music library, but unable to play.  Gives an error message of "Could not be found".  How do I retrieve my library contents?

    Hello ehoff5,
    I would be concerned too if I was not able to play my music in iTunes.  It sounds like the music files may be in a location that iTunes is not expecting.  I recommend reviewing the following articles to locate you music files on your computer:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/ts1408
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error message: Table could not be found when opening reports with InfoView or CMC

    Post Author: Giovanni
    CA Forum: Authentication
    Hi All,
    I have Crystal Reports Server XI R2 installed on a server and the database folder (foxpro) is located on a different server. Crystal is connected to the database using an ODBC connection (UNC path).
    When I try to preview a report in Infoview or CMC I get the following error: "There was an error retrieving data from the server: The table 'dp' could not be found. Error in File C:\WINDOWS\TEMP\{BC665D6D-95DE-426B-A7A2-EBF9D23F42F4}.rpt: The table could not be found."
    dp is the name of one of our tables.
    If I publish a report that uses sql database or a foxpro db that is located on the same server as Crystal Server I donu2019t receive any error message..
    Please help if you can and thanks in advance.
    Giovanni

    Post Author: colin mackenzie
    CA Forum: Authentication
    Hi Giovanni.
    This post of yours is going on 2 weeks old.
    Have you solved your problem?

  • Error messag: File could not be found

    Hello,
    I don´t know were to post this so I give it a try here:
    I get a error message: RealPlayer: The file could not be found. The used link is outdated or incorrect. (below I see the link adress)
    Were can I get rid of this link? I don´t know were to change it or delete it so the message won´t show up again.
    Thank you for your help

    Just spoke to Apple cust service (the tech at the Genius bar in the Arlington VA store could not figure it out).
    Cust service suggested I close iTunes, then remove two files iTunesLibrary.itl and iTunesMusic.xml from iTunes to the Desktop. Then open iTunes, which will be empty. Load backup discs (which I fortunately have), populate iTunes again, which will now include the previously missing files, and then delete the files on the Desktop.
    If the backup does not work, then drag the two desktop files back to iTunes which should then not be empty but have the reduced population.
    The problem is apparently caused by anti-virus s/w which attaches to songs and quarantines or deletes them. Can happen any time, so the importance of keeping backups up to date.
    Let me try it and see what happens.

  • Error message: file could not be found.

    I use iTunes 8.2.1.6. I have started getting this message "Song X could not be used because the original file cannot be found. Would you like to locate it?" for about a quarter of the songs in my library. If I click "locate", it takes me to a window with program files, apparently.
    It also syncs only 3/4 of my songs to my classic iPod, again something new. And does not back up to disc: just freezes on a song and then crashes. The iPod was bought on July 11, 2009.
    Appreciate any advice. Thanks!

    Just spoke to Apple cust service (the tech at the Genius bar in the Arlington VA store could not figure it out).
    Cust service suggested I close iTunes, then remove two files iTunesLibrary.itl and iTunesMusic.xml from iTunes to the Desktop. Then open iTunes, which will be empty. Load backup discs (which I fortunately have), populate iTunes again, which will now include the previously missing files, and then delete the files on the Desktop.
    If the backup does not work, then drag the two desktop files back to iTunes which should then not be empty but have the reduced population.
    The problem is apparently caused by anti-virus s/w which attaches to songs and quarantines or deletes them. Can happen any time, so the importance of keeping backups up to date.
    Let me try it and see what happens.

  • Error message song could not be found

    i am running latest version of itunes. I am unable to access tracks from itunes I keep getting error message the song could not be used because the individual file could not be located. I am able to play any track from the itunes music folder but not from itunes!!! i have reloaded itunes but makes no difference. once the track has been played from the itunes libary it can be played in itunes

    jadeypup,
    See if this article helps, many have had this issue resolved by "recreating the iTune Music Library"
    http://docs.info.apple.com/article.html?artnum=93313
    Also, see this article for information on how to search the computer for the songs:
    http://docs.info.apple.com/article.html?artnum=301749
    Hope this helps,
    Generik
    PowerMac G4/Dell Precision WS 370, XP Pro   Mac OS X (10.4.7)  

  • When I sync my ipad 2 I get error message ipad could not be found

    When I sync my ipad photo's and tunes download onto my PC but before the sync is completed I get error message saying ipad can't be found. How do I complete the sync process. I have updated version of itunes but still have problem

    You may have a backup that is causing this problem, but I would start with something very simple. Quit iTunes, reboot your PC and restart the iPad and then try again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Error Message: "Resource could not be found" while attempting to restore iPod Touch w/ iOS 6.0

    Hey all,
    While attempting to restore my friend's iPod Touch I got several error messages after which, ultimately, I would be unable to complete the restoration.
    When I first connected the iPod touch to my MacBook Pro I received this error message:
    I therefore attempt to update it's software and find that it has been updated to the latest version (iOS 6.0).
    I move on to restore and regardless of whether or not I choose to back up I receive this error message:
    By clicking on "More Information" I am brought to this web page:http://support.apple.com/kb/TS1275
    However, this page was last updated in October of 2012 and I seem to remember the new iTunes update happening after that.
    Any ideas regarding what might be the problem and how to solve it?
    Thanks for all your help. Happy New Year!

    To be clear, I'm unsure whether or not iOS 6.0 is the latest iPod Touch software but I did get this error message when I attempted to update:
    I hope this helps. Thank you!

  • Error message:song could not be found would you like to locate it

    The music is already in my folder, as this had =s happened with most of my music is there a quick fix?

    You get exclamation marks or dead tracks because iTunes can’t find the file. This can happen for a number of reasons:
    The song file or a folder in its path was renamed
    The song file or the folder it is in has been moved
    The song file has been deleted
    The device containing the song files e.g. external drive is not accessible.
    So did you change anything? If so can you put it back how it was?
    Anyway, if all your tracks have exclamation marks, the quickest fix is to close iTunes, then drag iTunes Library.itl and iTunes Music Library.xml out of your iTunes folder to the desk top.
    Then open iTunes and an empty library is created. Then use File>>Add folder to library to add your iTunes umisc folder to iTunes. If you have music in other folders add those too.
    This fix loses all coutns, ratings and playlists.
    If only a few tracks have exclamation marks, you can just add your iTunes music folder, this will not create duplicates, but will add any missing tracks.
    The entries with exclamation marks will remain and these can be removed, which I can tell you how to do if you choose this route.

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • I am trying to print a fillable form.  It will not print and I get two error messages "document could not be printed" and "there were no pages selected to print."  Th latter is not true.  Won't print all, the page I am on, nor any series of pages inserted

    I am trying to print a fillable form - - an application for a Chinese visa.  It will not print and I get two error messages:  "document could not be printed" and   "there were no pages selected to print."  The latter is not true.  Won't print at all, the page I am on, nor any series of pages inserted.
    Am using a MAC desktop and a Cannon PIXMA MX922 printer.
    I need to print this form now that it is filled out?  What can I do? 

    Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
    EDIT: I found it and did, but still not working.

  • ITunes error message / "iTunes could not connect to the music store...

    The past week, I have been having problems connecting to the iTunes music store. I purchased my ipod in 10/05 and have had no problems until recently. I keep receiving the following error message:
    "iTunes could not connect to the music store. Network connection was refused. Make sure your network settings are correct & network connection is active, then try again."
    I went onto the website, and checked various things. I uninstalled and reinstalled iTunes and the software, checked to see if I have any firewalls (none), checked to see if I have Windows XP service pack 2 (I have 1), and contacted my ISP (AOL). Help! I have AOL 8.0 dial up, and have had service with them for a couple of years now, so that is not an issue. Per AOL, I tried uninstalling AOL adapter and restarting my computer, and also deleting cookies and deleting files/all offline content, defaulted my security settings (they were the same), and reset web settings. I have restarted my computer, but am still having the same issues. I already contacted iTunes about this issue, and they sent me the same email twice, with the same instructions as their website, which I indicated I already tried numerous times. I have also checked my connections, and everything is fune. I try to access iTunes after logging into AOL.
    Thank you in advance to everybody that responds.
    Emily

    Thanks for the input. Unfortunately, I keep trying to do that, and have not been able to download for about a week. After contact customer support, I received the general "technical support" email, which is the same information found on the website. After replying to the email, which stated that I tried already tried the methods listed, I received the same email again. After replying to that email which included the previous threads, I received an email stating that the deparment I replied to does not handle technical issues. So, tonight, I re-emailed them with all of the threads and asked for an explanation of why I received technical emails if they do not respond to technical emails. It will be interesting to see how they respond, although it will probably be some general email. I sometimes respond to member service emails at my place of employment, so I know the procedure. The bottom line is that I should receive answers to my questions, even if the answer is something along these lines:
    "I am researching your problem, and will contact you within the next xx hours/business days with a resolution. We value you as a customer, and strive to maintain excellent customer support and satisfaction. Thank you for your patience."
    Or, a similar response. I know there is a general response library. And, I also know that if some body is unable to answer a question, as customer support, they should try utilize their resources. Basically, be a problem solver.

  • I set up a playlist in itunes and when i tried to sync it to my iphone i get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occured.  Using itunes 10.5.2.11 and Windows Vista 64

    I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred.  Using itunes 10.5.2.11 and Windows Vista 64.  Any help?  Thanks in advance!

    I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

  • I tried to update my iPhone4's, but get the following error message:   iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.

    I tried to update my iPhone4's, but get the following error message:   iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.

    The solution will be found here, select your computer type and software.
    http://support.apple.com/kb/TS2529

  • I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

    I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

    One thing that might help.
    1. open itunes preferences from the edit menu and click on the devices tab.
    2. check the box to disable syncing for iphones connected to itunes and click ok.
    3. Then click the button to reset sync history.
    4. Now click ok to close the preferences window.
    5. connect the iphone to itunes and go to the info tab.
    6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
    7. then click apply on the bottom right of itunes.
    This will overwrite any events on the iphone, including any events that has become corrupted.
    Hope this helps

Maybe you are looking for