Error Message - Can't get rid of it

Error
Some installation files are corrupt.
Please download a fresh copy and retry the installation.
I've gotten that error at least 5 times, from 5 seperate times downloading. I have never previously had iTunes installed on this computer. Tried it from 3 downloads on this computer, one from my parents, and one from my laptop. They all get the same error message.
Custom AMD Windows XP Pro AMD 2.2GHz, asus MB, 1GB ram, BFG 256mb nVidia vga

Try using Microsoft Clean Up Utility. If you are not familiar with it, here is a MicroSoft article explaining it: http://support.microsoft.com/default.aspx?scid=kb;en-us;290301. Get all those files off your PC and start afresh.
Instead of running the install over the Net, save it to your hardrive and install it from there. Make sure you have got any firewall or antivirus programs such as Norton turned off because sometimes they are the culprit in corrupting the successful installation. Good Luck. Hope this helps
Rachyl

Similar Messages

Error message can't get rid of

When I turn my itunes on I get a error message that reads the registry used by itunes drivers for importing and burning cds and dvds are missing. This can happen as a result of installing other cd burning sortware, please reinstall itunes. I did reinstall and it didn't work. Every thing works just fine but can not get rid of this error mesage.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Installation error message - can't get rid of it

here was an error with this action. Try again later.
c35b41ef-ee6d-400e-bde1-6bf8ab4038f1
Can't get rid of error message,
can't license the product after trial period
Yes I have a subscription - 12mths

uninstall your cc app and the problematic product, run the cleaner (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall your cc desktop using the correct adobe id, Adobe: Creative, marketing, and document management solutions
finally, install the problematic product using the cc desktop app.

I ran a scan on my computer and it found 1,288 errors how can I get rid of them?

I did a scan test on my desktop and found that I have run sections(10 errors), user software settings(195 errors), system software settings(867 errors), ActiveX and com sections(78 errors), file associations(92 errors), uninstall sections(known as add-remove programs in control panel found(28 errors), current user file extensions(3 errors), shared Dlls(1 error) and in the missing help files (4 errors). How can I get rid of all these errors?

As this is not a Firefox question, you should consider asking this in a forum that specializes in Windows questions, such as Eileen's Lounge - http://eileenslounge.com/

I keep getting plug in error messages, i cant get rid of them. what is the problem

it happens when i'm in facebook playing games. it makes me run so slow

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.
What are these error messages saying?

How can I get rid of error message?

Have tried to set up my pop3 email on my 6700 slide using the same settings I've always used on previous phones/pc and for some reason emails just won't send. However my main problem is that I keep getting a message flash on screen saying 'Unable to send message:[Email address]. As soon as I clear it, it comes back about 2 seconds later and just won't go away. Stops me doing anything on the phone as I have to keep clearing the message every few seconds. I've gone into drafts/outbox, every folder I can find in 'Messaging' and there's no copy of the email to even delete it. I've even gone to my mail server on the web and the message isn't showing. From the mailbox itself on the phone, I've tried to folders under 'More folders' but there's nothing showing - no sent or drafts folders. How can I stop this error message appearing every 2 seconds?

Hello, Sorry to hear that you can't get rid of this message from your device. I suggest you try going to http://email.nokia.com and register there. I think you'll find your email experience much more to your liking there.
Chris McK - Nokia Messaging/Social Product Marketing

Desktop Manager "disconnected" and I can't get rid of the error message

I just purchased a Blackberry Curve 8530, running v5 software, my computer is Windows 7. I installed the 501_b073_multilanguage software that I downloaded from Blackberry's website. When I launch the Desktop manager I get this message: "Before you begin, verify that your current BlackBerry device is connected to your computer." The troubleshooting posts I've seen on this forum include many tips (the ones I've tried are below). One in particular I can't do is "The desktop manager is showing "disabled."
-Make sure that the user has gone into the desktop manager and selected options > connection settings > detect."
... because I can't get rid of the error message dialoge box, and I can't click on the options menu in the BB Desktop Manager.
I have tried the following:
uninstalled it and reinstalled it twice - 2nd uninstall was a "hard" uninstall where I deleted the registry files by hand
moved the cable to the USB port in the back (after trying both the ports in the front) of the computer
restarted the computer many times
hard booted the phone by removing the battery
plugged in, removed, and replugged in the phone.
Also:
The phone is installing correctly when I plug it in, but the software still doesn't seem to see it.
In the Device Manager, the BlackBerry is showing up under Portable Devices. Double-clicking on it gives me the reassurring "This device is working properly." message.
The Com1 port is working properly also, according to the Device Manager.
Double-clicking on the device manager icon to get the properties shows that the Com1 port is "disconnected" -- when I try to configure it it just pops back to the disconnected state.
If someone has an idea or something I haven't tried I'd sure appreciate it!!
Thanks!
K
Solved!
Go to Solution.

Okay, folks, after a 3 1/2 hour phone call with a (very patient) telephone support person at Blackberry, here's what I learned.
You can check your USB drivers this way:
Plug in your phone into your USB drive. Assuming your Blackberry is "seen" by your computer...
Go into the Device Manager on your computer (control panel)
Expand the Universal Serial Bus controllers item on the bottom of the list
Right-click on BlackBerry Smartphone and choose Properties
Click on the Driver tab
Click on the Driver Details button
You should see one driver. I saw two. The one the BlackBerry likes is the RimUsb one.
So here's what NOT to do: We tossed the entire driver that was the "extra". This effectively made using my mouse and keyboard impossible, as they are USB, and sent my poor husband into the basement to find a million-year-old keyboard (and then a mouse) with the old fashioned kind of connectors (PS2). Bleh. Don't do that.
Here's what I did that worked (not saything this will work for you -- this modifies the Registry so better do a system backup with that backup and restore if you're nervous about this sort of thing):
From the start menu, choose run, and type regedit to get into the Registry editor.
Follow this file path: Computer, HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Class
Click on: {36FCE60-C465-11CF-8056-4445535400000}
If there's an item on the right called "UpperFilters", delete it. (see pictures)
Hope this helps someone.
Karin
First pic: shows "before"
Second pic: shows full file path and "after"

Can't get rid of error message "MSVCR80.dll" on my windows PC? Mistakenly clicked on the 'sync to all ipads etc" when I was trying to download an ebook. Since discovered it is an outdated piece of software that ought to be taken from the net.

I can't get rid of message "MSVCR80.dll" on my windows XP PC. I mistakenly clicked on the 'sync pc ipad etc" choice not knowing it was an outdated piece of software. I need plain english assistance. thanks, self seal

That's an iTunes error message. Please post this over in the iTunes for Windows forum. This is iCloud.

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

Okay, folks, after a 3 1/2 hour phone call with a (very patient) telephone support person at Blackberry, here's what I learned.
You can check your USB drivers this way:
Plug in your phone into your USB drive. Assuming your Blackberry is "seen" by your computer...
Go into the Device Manager on your computer (control panel)
Expand the Universal Serial Bus controllers item on the bottom of the list
Right-click on BlackBerry Smartphone and choose Properties
Click on the Driver tab
Click on the Driver Details button
You should see one driver. I saw two. The one the BlackBerry likes is the RimUsb one.
So here's what NOT to do: We tossed the entire driver that was the "extra". This effectively made using my mouse and keyboard impossible, as they are USB, and sent my poor husband into the basement to find a million-year-old keyboard (and then a mouse) with the old fashioned kind of connectors (PS2). Bleh. Don't do that.
Here's what I did that worked (not saything this will work for you -- this modifies the Registry so better do a system backup with that backup and restore if you're nervous about this sort of thing):
From the start menu, choose run, and type regedit to get into the Registry editor.
Follow this file path: Computer, HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Class
Click on: {36FCE60-C465-11CF-8056-4445535400000}
If there's an item on the right called "UpperFilters", delete it. (see pictures)
Hope this helps someone.
Karin
First pic: shows "before"
Second pic: shows full file path and "after"

How can I get rid of files that cannot be imported error message

Hello, this is my first post. I am a new mac user. I have imported my jpgs from an external hard drive which was in the most part successful, however, 14 of the files appear to be corrupted and every time I open iphoto9, I get the error message, '14 of your files could not be imported, would you like to import them now?' I have tried choosing both options yes and no and it then writes error message telling me it has created recovered photos folder. When you go to this folder it is empty and every time I restart iphoto, I get the same message. I have tried deleting all the files and re-importing only to find that the number of corrupted files has now doubled. I have also deleted the iphotos library recovered photo folders to no avail. I have tried creating a new library and importing the files to that but the same problem occurred. How can I get rid of this repeated error as I am now up to recovered folder number 47! Help!

P Robbins
Welcome to the Apple user to user assistance forums
quit iPhoto and right click (control click) on the iPhoto library (in the pictures folder by default) and select the show package contents command - find the import (or importing) folder and drag it to the desktop and launch iPhoto - you should be fine now - open the import(ing) folder on your desktop and if there are any photos you want import them then trash the folder
LN

When starting Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message.

When starting up Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message?
The error message is: what happened: Type Error: Components. classes ['@mozilla.org/extensions/manager;1'] is undefined.
It appears all the time already from the beginning after installing Firefox 4.

Thanks a lot. The Ask toolbar created this problem. Another problem is: When searching on the web via Google, normally it is possible to type a few letters and then look what appears and then click on the wanted word(s). A number of word(s) ineed do appear, however it is not possible to select any of them as ws possible as mentioned in olders versions.

I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1. I am unable to rename/number devices. How can I get rid of this error message.

I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1. I am unable to rename/number devices. How can I get rid of this error message.

I've just seen this message for the first time and it's showing on 10 devices.
What I really love about Apple Configurator is the copious amount of context driven help offered to you.
"Unable to send ClearPasscode command to device.
The device was disconnected.
Check the USB connection to the device."

Error message pops up: url files of type "file:" are not supported. How can I get rid of this?

Error message pops up: url files of type "file:" are not supported. How can I get rid of this?

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Can't get rid of a TX - message keeps appearing and being processed by OSB

I have some sort of a poison message or TX I can't flush. Every 10 seconds I get a log message like the second one below, and the number of pending messages in multiple places and OSB proxy service messages processed keep climbing - all without producing any new messages on my part. I've tried deleting the default server store on the OSB managed server and the filestore for the JMS server. No luck.
When this first started happening, the error messages looked like the first one below. Something I did caused the change, I assume. However, it's the same TX ID throughout.
So, first, how can I get rid of this thing? It's driving me nuts and keeping me from closing out a POC.
Second, why is it happening? I have one suspicion - could it be because that somehow we configured mutiple domains with the same name for a distributed application? It's not my normal practice but it happened. These domains don't communicate directly, but there are domains that need to communicate with both. So I'm guessing the name ambiguity may be hurting us. Just a guess, though.
In this case, the sgosb domain's proxy service (this domain name is unique) is receiving messages from a queue resident in the pega_domain in Singapore and another proxy service is putting a message to another queue in the pega_domain in the UK. This is not in a single TX; the first proxy service forwards the message to a queue in the sgosb_domain, the second proxy service gets that message and puts it into the other pega_domain. It's an XA TX for each proxy service.
Just to make it more fun, the sgosb_domain has another proxy service reading from a different queue and forwarding it to a queue in the third pega_domain in the US.
TIA for any help or insight.
Oh yes, the OSB domain is WLS 10.3.4, while the pega_domains are WLS 10.3.2
Original error message
####<Apr 13, 2011 4:32:13 AM GMT> <Error> <EJB> <sg01app510> <sgosb_1> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'>
<<anonymous>> <> <92f54a30d60e6302:-4b6d523c:12f4cfeaabc:-8000-0000000000000123> <1302669133597> <BEA-010026> <Exception occurred during commit of
transaction Xid=BEA1-039B0B6D3D0E77C1B135(1898471720),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since
begin=0,seconds left=600,XAServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=(ServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=
(state=new,assigned=none),xar=null,re-Registered = false),SCInfo[sgosb_domain+sgosb_1]=(state=rolledback),SCInfo[pega_domain+pega_1]=(state=rolledback),properties=
({}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+, XAResources={eis/tibjms/Topic,
WLStore_sgosb_domain_FileStore_auto_1, eis/aqjms/Queue, eis/wls/Queue, eis/tibjms/Queue, WLStore_sgosb_domain__WLS_sgosb_1, eis/AQ/aqSample, eis/aqjms/Topic,
eis/pramati/Queue, eis/sunmq/Queue, WLStore_sgosb_domain_WseeFileStore_auto_1, WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1,
WSATGatewayRM_sgosb_1_sgosb_domain, eis/jbossmq/Queue, eis/activemq/Queue, eis/fioranomq/Topic, eis/tibjmsDirect/Topic, eis/wls/Topic,
eis/tibjmsDirect/Queue, eis/Apps/Apps, eis/webspheremq/Queue},NonXAResources={})],CoordinatorURL=pega_1+nj09mhm5078:22111+pega_domain+t3+):
javax.transaction.RollbackException: This transaction does not exist on the coordinating server. It was probably rolled back and forgotten.
        at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
        at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
        at weblogic.transaction.internal.CoordinatorImpl_1032_WLStub.commit(Unknown Source)
        at weblogic.transaction.internal.TransactionImpl$1.run(TransactionImpl.java:331)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
        at weblogic.transaction.internal.SecureAction.runAction(SecureAction.java:72)
        at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:327)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:252)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:553)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:424)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:326)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: javax.transaction.RollbackException: This transaction does not exist on the coordinating server. It was probably rolled back and forgotten.
        at weblogic.transaction.internal.CoordinatorImpl.commit(CoordinatorImpl.java:94)
        at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
        at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The error message I'm getting now
####<Apr 13, 2011 4:51:38 AM GMT> <Error> <EJB> <sg01app510> <sgosb_1> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <>
<92f54a30d60e6302:-42808c28:12f4d3173cb:-8000-0000000000000032> <1302670298730> <BEA-010026> <Exception occurred during commit of transaction
Xid=BEA1-0011D0679BA5074B8E12(1930603846),Status=Rolled back. [Reason=javax.transaction.xa.XAException],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds
left=60,XAServerResourceInfo[WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1]=(ServerResourceInfo[WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1]=
(state=rolledback,assigned=sgosb_1),xar=WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1239571724,re-Registered =
false),XAServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=(ServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=
(state=rolledback,assigned=pega_1),xar=null,re-Registered = false),SCInfo[sgosb_domain+sgosb_1]=(state=rolledback),SCInfo[pega_domain+pega_1]=(state=rolledback),properties=
({}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+, XAResources={eis/tibjms/Topic,
WLStore_sgosb_domain_FileStore_auto_1, eis/aqjms/Queue, eis/wls/Queue, eis/tibjms/Queue, WLStore_sgosb_domain__WLS_sgosb_1, eis/AQ/aqSample, eis/aqjms/Topic, eis/pramati/Queue, eis/sunmq
/Queue, WLStore_sgosb_domain_WseeFileStore_auto_1, WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1, WSATGatewayRM_sgosb_1_sgosb_domain, eis/jbossmq/Queue, eis/activemq
/Queue, eis/fioranomq/Topic, eis/tibjmsDirect/Topic, eis/wls/Topic, eis/tibjmsDirect/Queue, eis/Apps/Apps, eis/webspheremq/Queue},NonXAResources=
{})],CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+): weblogic.transaction.RollbackException: Unknown reason
        at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1881)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:345)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:553)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:424)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:326)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: javax.transaction.xa.XAException
        at weblogic.store.gxa.internal.GXAResourceImpl.prepare(GXAResourceImpl.java:1227)
        at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:1295)
        at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:500)
        at weblogic.transaction.internal.ServerSCInfo.startPrepare(ServerSCInfo.java:380)
        at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(ServerTransactionImpl.java:2593)
        at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(ServerTransactionImpl.java:1321)
        at weblogic.transaction.internal.SubCoordinatorImpl.startPrepare(SubCoordinatorImpl.java:183)
        at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
        at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.>Edited by: SteveElkind on Apr 13, 2011 5:50 AM

Tom,
Thanks! Succinct and easy to understand as ever.
Yup, that covers it - I had also just seen this in the docs after looking at atheek1's earlier response (thanks to him/her as well). It's covered almost as clearly there as you state it here (http://download.oracle.com/docs/cd/E11035_01/wls100/jta/trxcon.html).
While the ESB domains meet all of those requirements (except for cross-domain security configuration), each of the other two sets of domains (3 in each set) do not meet the naming uniqueness criteria for domain and server names; they do for JMS server names. I saw the store names in the TX identifier string as included resource, and assumed they might play a part - that's why I changed them. As you say, an unnecessary change. Oh well - it was an easy one.
My normal practice has been for unique names in the past, due to problems I had years ago with cross-domain JMS traffic in an earlier WLS version. I guess it's the wrong time to have forgotten that lesson.
Does anyone know of a quick way of changing a domain name quickly without rebuilding the domain? In the past WLST resulted in incomplete copies for me, is that still a problem? Server names are easy, just some global search-and-replace in the config.xml file (and in the management scripts, too)
/Steve

In Mail, one mailbox for Recovered Message (AOL) keeps showing 1 very large message that I cannot delete. How can I get rid of this recurring problem, please?

In Mail on iMac, successfully running OS X Lion, one mailbox on My Mac for "Recovered Messages (from AOL)" keeps showing 1 very large message (more than 20 Mb) that I just cannot seem to delete. Each time I go into my In Box, the "loading" symbol spins and the message appears in the "Recovered Messages" mailbox. How can I get rid of this recurrent file, please?
At the same time, I'm not receviving any new mails in my In Box, although, if I look at the same account on my MacBook Pro, I can indeed see the incoming mails (but on that machine I do not have the "recovery" problem).
The help of a clear-thinking Apple fan would be greatly appreciated.
Many thanks.
From Ian in Paris, France

Ian
I worked it out.
Unhide your hidden files ( I used a widget from http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html)
Go to your HD.
Go to Users.
Go to your House (home)
there should be a hidden Library folder there (it will be transparent)
Go to Mail in this folder
The next folder ( for me ) is V2
Click on that and the next one will be a whole list of your mail servers, and one folder called Mailboxes
Click on that and there should be a folder called recovered messages (server) . mbox
Click on that there a random numbered/lettered folder -> data
In that data folder is a list of random numbered folders (i.e a folder called 2, one called 9 etc) and in EACH of these, another numbered folder, and then a folder called messages.
In the messages folder delete all of the ebmx (I think that's what they were from memory, sorry I forgot as I already deleted my trash after my golden moment).
This was GOLDEN for me. Reason being, when I went to delete my "recovered file" in mail, it would give me an error message " cannot delete 2500 files". I knew it was only 1 file so this was weird. Why 2500 files? Because if you click on the ebmx files like I did, hey presto, it turned out that they were ALL THE SAME MESSAGE = 2500 times. In each of those folders in the random numbers, in their related message folder.
Now remember - DONT delete the folder, make sure you have gone to the message folder, found all those pesky ebmx files and deleted THOSE, not the folder.
It worked for me. No restarting or anything. And recovered file. GONE.
Started receiving and syncing mail again. Woohoo.
Best wishes.

Error Message - Can't get rid of it

Similar Messages

Maybe you are looking for