Error message configuration

Hi: I speak spanish... is there a way to change the error message... ???
have the same problem for forgot password email I can customise the email but not the email subjet.
thanx

mmm...don`t work.
did it this way: 1. create a RS to get all the password. 2. used the "check unique key" (selected the table, column, error message, and this condition a. {Recordset1.clave} == {POST.password} b. {Recordset1.clave} == {password}.
I think the error generated "Duplicate entry '1234' for key 2" is processed before the "check unique key".
why? because if a make a intentional error like:
- duplicating the email and password: the result is "Duplicate entry '1234' for key 2"
- if the email is right (no duplicated) a the password is duplicated: the result is "Duplicate entry '1234' for key 2"
Just when the password is right and the email is duplicated.. popups the email error generated by TNG.Res.php
any clue?

Similar Messages

  • How do I stop error message "Configuration appears to have changed"  reactivate!

    Adobe Acrobat repeatedly posts error message "configuration appears to have changed ...reactivate".  How to get rid of this annoyance?

    Please see http://forums.adobe.com/message/4919014#4919014 which discusses how to obtain a version of Acrobat 7 which does not include activation.  The activation servers for Acrobat 7 were shut down yesterday so even if you resolve the issue you would be unable to reactivate.

  • Sharepoint Error Message "Configuring column based defaults is only allowed in document library lists"

    We set up a SP 2010 site with several document libraries. Library A works fine only when I click on column default value settings I get the following error message:
    "configuring column based defaults is only allowed in document library lists"
    This list is a normal document library and all other settings work fine. If I create a new document library or go to the settings of document library B I don't see this problem and the feature works fine.
    How can I solve this problem within this library since I cannot delete the library and replace it by a new one.
    Thanks.
    library settings page of this library:

    Hi,
    According to your post, my understanding is that
    when you clicked on column default value settings you got the error message.
    What are the column types in the library?
    It seems that some column types don't support default value settings.
    I recommend to create a new library with the same columns to check whether you can set
    default values.
    If so and the error message persists, please check the SharePoint ULS log to find more information about this error, the ULS log file is in the location: C:\Program Files\Common Files\Microsoft
    Shared\Web Server Extensions\14\LOGS
    You can check the ULS log by the methods here:
    http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Internal error message configuring LDAP security options in CMC

    After entering LDAP security information in Central Management Console - option authentication, when clicking 'Finish' an error message appears: "internal error in secLdap complement".  How can I solve this problem ?

    Hi,
    Please check that whether you are following the proper steps while configuring the LDAP.
    You can refer the BusinessObjects Admin guide for the configuration:
    http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_admin_en.pdf
    And also, please check troubleshooting section for more information.
    Regards,
    Noor.

  • Error while configuring Enterprise manager

    Hello,
    I want to configure enterprise manager, while creating a new database using database configuration assistant in oracle 11g i am getting following error message
    *"Configuring database with database control requires a listener to be configured in the current oracle home.
    You need to run Netca to configure a listener before you can procede. Otherwise you may choose o continue with out Database control configuration"*
    My OS is Windows 7
    is there any other way to configure Enterprise manager OR do i need to install any specific package
    Thank you friends.

    Hi, Finally i created a listener "KUMAR"
    *Microsoft Windows [Version 6.1.7600]*
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Users\praveen kumar gogula>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 22-SEP-2011 17:50
    *:44*
    Copyright (c) 1991, 2010, Oracle.  All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias                     KUMAR
    Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date                22-SEP-2011 17:44:58
    Uptime                    0 days 0 hr. 5 min. 48 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\oracle\product\11.2.0\dbhome_1\network\admin\listen
    er.ora
    Listener Log File         c:\oracle\diag\tnslsnr\praveenkumarg\kumar\alert\log.x
    ml
    Listening Endpoints Summary...
    *(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=praveenkumarg)(PORT=1521)))*
    *(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))*
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "praveen" has 1 instance(s).
    Instance "praveen", status READY, has 1 handler(s) for this service...
    Service "praveenXDB" has 1 instance(s).
    Instance "praveen", status READY, has 1 handler(s) for this service...
    The command completed successfully
    C:\Users\praveen kumar gogula>
    What to do next?

  • Error iviscope configure trigger

    Good morning,
    I have a problem with the Iviscope trigger configuration.
    I'm using a PCI-5105 Digitizers/Oscilloscopes to acquire 3 channels simultaneously.
    I use IVIscope vi to realize the program.
    Channels configuration is ok. But when I want to acquire the signals some problem happen.
    on version 1.1 of my program the 3 signals are ok but not at the same time. (frequency 1 kHz, voltage +4V, +1V and +2V)
    you can see Front panel v1.1 and diagramme v1.1
    I don't understand why the signals are not acquired at the same time ?
    so I do a second version using trigger vi. (see diagramme1 v1.2 and diagramme2 v1.2)
    in this case the signals are not correct (Front panel v1.2)
    here I want to use channel3 to trig the 3 other channels.
    and with this version, sometime an error message appear (error message Configure Trigger).
    Why the trigger channel doesn't work?
    Best regards
    Florent
    Attachments:
    diagramme1 v1.2.JPG ‏117 KB
    Front panel v1.1.JPG ‏186 KB
    diagramme v1.1.JPG ‏149 KB

    the other attach File
    Attachments:
    error message Configure Trigger.JPG ‏133 KB
    diagramme2 v1.2.JPG ‏94 KB
    Front panel v1.2.JPG ‏225 KB

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

    What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

    You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • Error message while creating configurable material for variant configuration.

    Dear All,
    I want to create configurable material for the purpose of variant configuration. When trying to create configurable material using mm 01 or mm k1, it is displaying an error message that internal number assignment is not possible for the material type configurable materials as well in using external number also. Can anyone specify the steps to be done in creating the configurable material. Thank you all.
    Regards
    Akula Sivaji Kumar Madhu Kiran

    If you want to set these material type to another group (Which has a internal number and external number range), then you can do it.
    In MMNR, Click on the Edit Group.
    Then select the material type and click select element.
    Then mark a tick option in another group and then press Element/Group.
    Then you can see the material type will come under this group.
    Now save your entry, and create a material with this material type.

  • Error message while configuring logical standby in OEM

    Hi,
    I am trying to configure a logical dataguard using OEM. I am using the option use staging area option, I am receiving the error message the user does not have permission to create db files.
    Any suggestions on this please.

    Os versio red hat 5.6
    oracle - 11.1.7.0
    just an error message
    The following files or directories cannot be created due to the specified reasons: The specified user does not have the write permission required to create these files or directories /db/db01/oradata/sysaux01.dbf; ............
    The specified user does not have the write permission required to create these files or directories.
    Edited by: 794729 on Jun 16, 2011 10:28 AM

  • Error message while i am trying to configure app server domain in PT 8.48.1

    Team,
    I am getting below error message while i am trying to configure app server domain in PT 8.48.16. I have uninstall TUXEDO 8.1 and then install 3 times. But, no luck.
    Enter domain name to create
    :CRPROD
    Merging old domain configuration file with new template file...
    source C:\Documents and Settings\psadmin\Desktop\psappsrv.cfg
    template E:\psoft\PT848\appserv\large.cfx
    destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
    Creating domain folder CRPROD...
    Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
    psappsrv.ubx
    Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
    Copy psasnt.val to CRPROD1\psappsrv.val failed!
    Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
    Copying Jolt repository file...
    Copy jrepository to CRPROD1\ failed!

    I get below error when i try to create a domain from import a file option.
    PeopleSoft Import Application Server Configuration
    1) Import from file
    2) Import from application domain
    q) Quit
    Command to execute (1-2, q) : 1
    Enter full path to configuration file
    :E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
    Enter domain name to create
    :CRPROD1
    Application Server domain CRPROD1 already exists...
    1) Replace existing domain
    2) Enter different domain name
    q) Quit
    Command to execute (1-2, q) : 2
    Enter different name for domain: CRPROD
    Merging old domain configuration file with new template file...
    source E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
    template E:\psoft\PT848\appserv\large.cfx
    destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
    Creating domain folder CRPROD...
    Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
    psappsrv.ubx
    and when i try to crearte a domain with " create a domain " option , i got below error message.
    PeopleSoft Application Server Administration
    1) Administer a domain
    2) Create a domain
    3) Delete a domain
    4) Import domain configuration
    q) Quit
    Command to execute (1-4, q) : 2
    Please enter name of domain to create :CRPROD1
    Configuration templates:
    1) developer
    2) large
    3) medium
    4) small
    Select config template number: 2
    Creating domain...
    Copying application server configuration files...
    Stripping Annotations...
    Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
    Copy psasnt.val to CRPROD1\psappsrv.val failed!
    Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
    Copying Jolt repository file...
    Copy jrepository to CRPROD1\ failed!
    Domain created.
    Would you like to configure this domain now? (y/n) [y] :Y
    Error opening file 'psappsrv.ubx':
    Error opening file 'psappsrv.ubx':
    Quick-configure menu -- domain: CRPROD1
    Features Settings
    ========== ==========
    Actions
    =========
    1) Load config as shown
    2) Custom configuration
    h) Help for this menu
    q) Return to previous menu
    HINT: Enter 3 to edit DBNAME, then 1 to load

  • When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

    When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect  earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • I uninstalled Itunes because message "Itunes has stopped working" i attempted to reinstall now get error message "error occurred during installation before itunes could be configured" how to i fix for windows 8.1

    I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Error message: Errors occurred during installation before ITunes could be configured. Your systerm has not been modified. To complete the installation, run the installer again.

    Trying to install iTunes and keep getting the following error message: "Errors occurred during installatino before iTunes could be configured. Your system has not been modified. To complete the installation, runthe installer again.
    This message appears everytime I try to install iTunes. Help!

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

Maybe you are looking for

  • Doesn't open PDF file

    Hello, I have installed Adobe Reader 11 on my Mac. But when I try to open an PDF document, it asks me to install Adobe Reader. I go through the installation again, but again the same proble. It asks me install Adobe Reader. By the way, when I install

  • Error -34 and error -50 message while preparing a project for iDVD

    I keep getting an error -34 and and error -50 message when I try to prepare a project for sharing in iMovie. Does anyone know why this might be please? I managed to create a DVD before with this project but then went back in and changed some of the t

  • Cross-tenant email and split domains - how to set up?

    I've successfully deployed exchange 2010 sp1 in /hosted mode with multi-tenancy and the install is working great. We are running into a problem configuring the send connectors for inter domain email and split domains. We have several customers wantin

  • Change credit cart info outside US

    Hi. I need to update my credit card info (I'm outside US) but the form fields in the screen are locked to accept only US info (apparently). As you can see in the image below, I already have basic info charged in my profile, but it was thanks to Apple

  • IPod touch 4 stops updgrading apps

    All of a sudden my iPod touch 4 enters a "waiting" state after pressing Update all apps.  Problem that after letting it upgrade the iBooks app the app is unavailabe while in this "waiting" download state.  CAn add the battery problem to the growing l