Error message "Data cannot be maintained for set type COMM_PR_PUR_1

Hi
While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message.  How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
For curioisity next I selected all such error logs & deleted. It gave me one warning (some inconstinecies error) which I ignored. After that I checked SMQ1 of R3 & SMQ2 of SRM. No log
But I observed a strange thing. Whatever material codes I am creating it is going straightway to SRM without running R3AS transaction. I checked R3AM1, selected the row and cancelled. But still going without any interferrance. Why ? How shall I stop this.
Thanks

Hello,
>
BNR wrote:
> Hi
> While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message.  How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
>(...)
Have a look at OSS note 1049693 - Data cannot be maintained for set type COMM_PR_PUR_1.
Regards.
Laurent.

Similar Messages

  • Master Data Cannot Be Maintained

    Dear All
    I want to view the Master Data for the standard Object.
    But when i right click the object and click on Maintain Master Data it gives the following error:-
    "Master data cannot be maintained for characteristic 0CRMPROD_ID."
    Please guide me on this.

    Hi Anup Chaudhari ,
    Did u load master data into that Infoobject.
    First load the master data using Infopackage after that you can check the master data by using
    Right click ---> maintain master data.
    Second thing is:
    Is there any lock message if it is check the attribute change run job once.
    Thanks,
    Kiran Manyam

  • Value date is not maintained for payroll area 08

    Dear all,
    I am facing this error Value date is not maintained for payroll area 08 while executing Transaction
    PC00_M08_CALC.
    Please let me know how to rectify this error?
    Thanks
    Best regards,
    Smita

    Hi Shruti,
    Please find the attached screen shot of the error.
    Thanks
    Smita

  • I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete.  Help!!!!

    I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete.  Help!!!!

    It's best to start with figuring out your eMac model and OS in order to answer the question. This article will help you determine your model:
    How to locate the serial number and identify your model
    And to get the version of Mac OS that's installed:
    From the Apple Menu at the left end of your menu bar, select "About this Mac..."
    In the resulting Window, you can see the Mac OS version just under the big "Mac OS X":
    If the eMac is older and you have never upgraded the system software, it's possible that your OS version is too old to run the current iTunes. The current version requires OS 10.5 (Leopard)or higher, which is a pay-for system upgrade.

  • I cannot utilize my Adobe documents - I get this error message - "You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for h

    I cannot utilize my Adobe documents - I get this error message - “You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.”

    Thank you!  My solution was different.  I had turned off services in MSCONFIG and did not turn them back on.  After I turned services back on, Acrobat started  working again without the nag error and impedance to use the program.  I appreciate your input!  Adobe customer service/tech support was dismally disappointing.

  • Getting an error message about UID:  Unowned UIDs for ImageFrame   CANNOT SAVE FILE

    Getting an error message about UID:  Unowned UIDs for ImageFrame   CANNOT SAVE FILE

    Hi,
    Could you please share your .muse file with us to investigate? Please email it to [email protected] If your file is greater than 20MB you can use something like Adobe SendNow or SendThisFile or Dropbox. Please do not forget to mention the link to this forum thread in your e-mail so that we can identify the file.
    Regards
    Vivek

  • MG3250 Printer throws up error message - Scangear cannot communicate with scanner for these reasons

    Hi
    I have an MG 3250 printer running off an HP Pavilion Laptop using Windows 8.1. Every time I try to scan  I get an error message that 'cannot  communicate with scanner for these reasons...........etc'. The only way I can get the printer / scanner to work is by going through the Control Panel / Hardware & Printers route. This seems terribly slow and time consuming. What is wrong and what needs to be done to correct the problem?
    Thanks

    I have the exact same problem as you with my new Canon LiDE 120. The errors I get are: 2, 156, 182, 55 and sometimes 77 when using it on my Windows 8.1 (64 Bit) desktop PC. I have tried installing and uninstalling the drivers multiple times, used different ports and still nothing. It does however work properly on a Windows 7 device.
    My PC's specification is as follows:
    Windows 8.1 (64 Bit) - With latest updates
    Avast Premier
    Malwarebytes
    ASUS z87 Pro
    Intel 4770k
    ASUS GTX 670 (4GB)
    8GB 1600MHz Kingston RAM
    Things I have done
    Tried different ports (USB 2.0 and 3.0)
    Installed all software & driver from CD
    Installed all software & driver from Canon Website
    Installed only the latest driver from Canon Website (April 2015)
    Tried to use Windows Fax & Scan, Scan, IJ Scan Utility, Scangear and Vuescan.
    What happens
    The physical buttons on the device are unresponsive
    The computer says it is warming up, but nothing happens
    It starts to scan for a few seconds and then comes to an abrupt end - this can happen at 10% of the scan or even at 91%.
    Surely the problem cannot be with Windows 8.1 since the device was only released last year. What could be the issue? I called their support line and was advised to clear the drivers of previous scanners used by my system, I did this and there still is no change. Could somebody please help me! 

  • E-Recruitment error message :Page cannot be displayed

    Hi E u2013Recruitment Experts,
    While testing the E rec BSP pages from SE80 I am getting the error message:
    Page cannot be displayed.
    What I have done is as follows:
    Step 1:defined the context in table V77RCF_CONTEXT
    Step 2:defined the element of container sequence in table V77RCF_CS_ITEMC  by copyin the data from table V77RCF_CS_ITEM
    Step3. defined the container sequence in table V77RCF_CS_SEQC and defined the element.
    Step 4.defined link for start pages in table V77RCF_SP_LINKC while copying the data from table V77RCF_SP_LINK
    Step 5.Define Start page groups in table V77RCF_SP_GROUPC while copying the enteries from V77RCF_SP_GROUP
    Step 6;Defined Start pages in table V77RCF_SP_ASIDC while copying enteries from table V77RCF_SP_ASID
    Step 8:I generated the url using the program RCF_GENERATE_URLS using Https protocol
    Apart from above setting I have also made entries in the following customer tables:
    T77RCF_SP_ID(C) - Startpages
    T77RCF_SP_ID(C)T - Startpages texttable
    T77RCF_SP_GROUP(C) - Startpage groups (the blocks with a number of links)
    T77RCF_SP_GROUPT/GRPCT - Startpage groups texttable
    T77RCF_SP_LINK(C) - Links
    T77RCF_SP_LINK(C)T - Links texttable
    T77RCF_SP_ASID(C) - assignment of groups to startpages
    T77RCF_SP_ASGRP(C)
    But still I am getting the error message that the page cannot be displayed
    Can any body tell me where I have missed out
    Thanks and best regards
    Rajeev chhabra

    Hi Naddy,
    I could not find the error log in the given T code.Is there anything else where I should look at.
    Cheers
    Rajeev

  • TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

    Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
    Please!
    Thanks!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Can't get my desktop PC Win7 MS Ofc 2010 calendar, contacts, tasks onto iCloud.  Get error message: Setup cannot start because of unexpected error". Laptop Win8

    I have a desktop PC Win7 with MS Ofc 2010.  I have iCloud on Macbook, Laptop Win 8 with MS Ofc 2013, iPhone synched.  I cannot get iCloud to accept the Outlook, Calendar, Contacts, Tasks with checking the box and starting the upload. 
    Error Message:  Setup cannot be started because of an unexpected error.  Should I delete iCloud and reload and try again?  What are suggestions from the community?   Sent report to iCloud.

    Hi Clifford,
    Take a look at the article below, it provides tips that should help you resolve the iCloud setup issue.
    iCloud: iCloud Control Panel setup cannot be started
    http://support.apple.com/kb/TS5178
    Symptoms
    After installing or upgrading to iCloud Control Panel 3.0, iCloud setup cannot complete.
    Resolution
    You may see one of several messages. Your troubleshooting steps will differ depending upon the message:
    “Your setup couldn't start because your username or password is incorrect. Go to the iCloud Control Panel, sign out, and sign back in.”
    Click Cancel to close the message.
    Click "Sign out" on the iCloud Control Panel.
    Reenter your Apple ID and password, then click Sign in.
    “Your setup couldn't be started because the iCloud server stopped responding.”
    or “Your setup couldn't be started because the iCloud server couldn't be reached.”
    Check the System Status page to make sure there aren't any issues affecting the settings you've chosen in iCloud Control Panel. If you are setting up iCloud for use with Outlook, check that there aren't any issues with Mail, Contacts, Calendars, or Reminders.
    Make sure your computer is online. In a browser, attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud contacts, calendars and tasks cannot be added to Outlook. If you're using Windows 8, review the instructions for resolving network problems. If you're using Windows 7, review the instructions for troubleshooting internet connection issues.
    “Your setup couldn't be started because of an unexpected error.”
    Apple is investigating this issue. This article will be updated as more information becomes available.
    -Jason

  • After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

    After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

    Hi everyone, I have Snow Leopard 10.6.8. I have been very very frustrated by this problem. [I could not create new windows, and anything that opens new windows, such as trying to see what Add-ons you have etc would not work]. I read about changing screen alignment to the top... I have one screen so the option does not exist. The above messages would not fix this problem. I searched hard and did find a solution in the end. I read stuff about removing Add-ons until the problem is fixed, but its simply not the case.
    First of all open Firefox. next go to options: Help --- 'Restart with Add-ons disabled'. Tick the box for add-ons, restart firefox. Next go to Tools --- Add-ons. Next (In the Add-ons Manager' click on 'Plugins' on the left hand side pane. Look for the small blue writing that says 'Check to see if your plugins are up to date'.
    Now notice it should say 'Missing Flash'. "For your safety, Firefox has disabled your outdated version of Flash. Please upgrade to the latest version". I followed this, reinstalled Flash and it now works as it always did, no problems. For people where the above fix didn't work, try this one out. Hope it helps people!
    :o)

  • Hi, tried to download Amazon, asked to update my security, push continue..screen goes white then error message saying' cannot connect to app store' but I'm already on it!

    hi, I'm a novice..be gentle! Tried to download Amazon Free... Asked to update my security I pushed OK...screen went white, then an error message saying ' Cannot connect to App Store', however I am already on it! Pls help!!

    Are you trying to download the amazon store app? Does this happen with all apps or just amazon?
    Try this
    Make sure IOS is updated to latest version
    (How to update your iOS device
    http://support.apple.com/kb/HT4623)
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).

  • When I try to connect to App Store,I get an error message stating "cannot connect to iTunes Store.  I show 3 bars on wifi connection

    When I try to connect to App Store, I receive an error message stating, "cannot connect to iTunes Store.  I show 3 bars on my wifi connection?  Can someone help...why if I tap App store, does a iTune error message display?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • HT4061 ITunes error message.  Cannot connect how do I fix that

    My ITunes no longer works error message says cannot connect. How do I get it working again

    You can try this ....
    Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.
    Or try this ... If you are running iOS 6.
    Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.

  • GETTING ERROR MESSAGE"You cannot login because the phone is JAL-enabled' while logging into CAD

    Hello All,
    One of my customer is facing problem while loging into CAD. They were getting an error message"
    You cannot login because the phone is JAL-enabled. 
            JAL-enabled phones are not compatible with CAD".
    I gone through some cisco document saying that Join across line/Direct transfer across policy option status should be set to OFF. But i dont find option in 9971 series phone.
    Any Reply for this query. Highly Appreciated.

    That's because the JAL function is inherent to the 8961/9951/9971 phone and cannot be disabled. You'll need to upgrade to a release that supports this phone model or use a different phone.
    Please remember to rate helpful responses and identify helpful or correct answers.

Maybe you are looking for

  • Getting error message stating that ' period is nt open for account type'

    I am getting an error message F5286 in MIGO transaction. I have changed all the dates but still I am getting error message regarding the dates only. After I had updated the dates in SE16N, still I am getting , 'dates not open for compamy code'. Moder

  • Archiving EBP Documents

    Hi, Could some body pl give pointers to material on EBP Documents archiving.  Espl Shipping Cards and Confirmations.  I want the checks carried out by program before documents are set to achievable status.  Thanks in Advance

  • PL/SQL Package with only Constants

    We have created a PL/SQL package with a Spec and NO BODY with only constant values. When a user logs onto the Database for the first time, and runs a program the first time the "Constants" package is called you get a ORA-06502, but every time after t

  • What are all the locations where lightroom metadata is written?

    Hi, I have a question about the location of any metadata (IPTC, keywords, etc.) written in Lightroom 5 to my raw files. I understand that this data is written (embedded) into jpg files but as a .xmp file next to the raw files. My question is, if I pu

  • Banking Services 5.0 Problem with BCA_ACC_MST_RUN

    Hi, I want to run the report BCA_ACC_MST_RUN within Banking Services 5.0 to transfer the contract data of a loan to FI-CA System (ERP 2005).The report runs, but does not grap newly created contracts and transfer them to Open Item Management system. I