Error Message"ERP adapter is called" for CRM sales order replicate to ERP
Hi All:
In our implemenation project, we use CRM7.0 stanard sales order type TA for sales order creation. And we did all the right configuration for sales order at CRM side. CRM sales order can be saved correctly.
But this CRM sales order couldn't be replicate into ERP, as in Middleware the corresponding BDoc message is yellow light and Error messsage show "ERP adapter is called".
Is anyone have same issue before, please kindly advise how to handling this issue and prossibile solution?
Best regards:
Kai
Hi Kai,
Is there any queue entry on transactions : SMQ1/SMQ2 with SYSFAIL status. If so, what is the error message it is showing?
Are you able to process the order further? Or getting an error message like "Document being distributed" or something?
Good luck,
Aaru
Similar Messages
-
Is it IPC mandatory for CRM Sales Order standalone (no webchannel)
Hi Consultants,
Do we still require IPC for SAP CRM sales order (standalone) though we don't have in scope Web-channel and ECC integration ..?Hello David,
Yes, you will still need IPC to execute pricing on your sales order. This is true for any sales scenario in CRM.
The only scenario where you won't need IPC is working with ECC order in CRM via the LORD interface. However since you are running standalone this is not applicable probably.
What you may not need is the IPC configuration UI (which is a Java web app), in case you are not working with configurable products.
However, for pricing your orders you need the pricing engine = IPC.
Best regards,
Manuel -
IDOC ISSUE for CRM Sales Order ..........URGENT
Hi ALL,
I am new to ALE/IDOCS & m having a problem:
The requirement is as below:
<b> If IDoc contains requested delivery date at header level (E1EDK03 002 DATUM), then map into CRM sales order header (CRMD_SALES - CRMT_REQ_DLV_DATE).</b>
IDoc Basic type: ORDERS05
IDoc Extension: ZORDERS05
IDoc Processing code: ZORDERS.
CRM Sales Order is being generated but Requested Delivery Date in Shipping Tab strip is not getting populated...
Thanks in advance..........
Points will be given..........
Thanks,
Kartikey Rawat.Hi
Did you map the contents of E1EDK03-DATUM to CRMD_SALES - CRMT_REQ_DLV_DATE?
Did you see whether it is populating properly in the target field during debugging?
Regards
Raj -
Shipping point determination is not happening for CRM sales order in ECC
Hi,
When we create direct sales order in ECC, shipping point determination is happening automatically that means all the relevant settings are properly maintained in ECC for automatic determination of shipping point.
But when we create sales order in CRM and replicate it to ECC, shipping point field is empty even though we use same master data.Hence we are unable to create delivery document.
All the master data (Org structure,Customers,Materials and plants) downloaded from ECC to CRM.
Your help would be highly appreciated.
Thank you.
Regards,
NagiHello Nagi,
Shipping point is determined by the following three factors:
1.shipping condition 2.loading group 3.plant
So please check your customization by the following steps:
1.Use T-code OVX6 to check if you have assigned the plant to your CRM order's sales organization.
2.Shipping condition is usually taken from CRM order directly. Please check whether you have CRM order shipping condition set to the same one as creating ECC order VA01
3.Use T-code SPRO then press F5, go to Logistics Execution Shipping Basic Shipping Functions Shipping Point and Goods Receiving Point Determination Assign Shipping Points to check the shipping point is assigned correctly.
I hope this could be helpful.
Best regards,
Maggie -
Doubt in CRM sales order Cube and ODS
Hell Friends,
We have a standard cube '0CSAL_C03' and ODS '0CRM_SALO' for CRM sales order.
ODS is attached with infosurce(datasource) -0CRM_SALES_ORDER_I and 80CRM_SAL2(this is update rules-another sales order items(lean extraction) ODS - 0CRM_SAL2).
we have another ods(lean extraction)- 0CRM_SAL2 and again it is attached with 0CRM_SALES_ORDER_I.
Could anybody explain me why two ods ar coming for sales order- crm.
Can we use two ods or only one ods-0CRM_SALO?
Could you pls. check it the system under- crm application component and let me know what is the best way for going impls.
Thanks,
MahanteshHi!
actually they definatly use Bdocs because messages bdocs are the main communication elements in CRM. you will definatly find them in SBDM. Bdoc are simmilar idoc's they used to send information between CRM transactions and ERP systems, mobile clients or to BW. there are 2 types of Bdocs message bdocs(M Bdocs) and synchronization Bdocs (S Bdocs). Sbdocs are used for sycronizing between moblie clients and CRM online. M bdocs are used for communication within CRM and also for exachange information between R/3 and CRM as well.
So for sales we normally configure our standard Bdocs or we can modell our own bdocs. lean Bdocs are message bdocs but have only subset of all the fields in a transaction and used for updating only those fields. usage of them can be verified only CRM specialists. it depends on how your organizational sales process is configured in CRM.
in SALES we normally use bdoc BUS_TRANSACTION_MESSAGE this is used for most of the transactions in CRM. so you got to confirm from your team if they are using any other bdocs for slaes additional to the above mentioned.
with regards
ashwin -
Replicate custom fields from CRM sales order to R/3 sales order
Hi Michael,
I have a requirement to replicate custom setype data created for CRM sales order to R/3 sales order.These fields have been created at item level.
Do you know the set of steps to achieve the same.
Any help would be appreciated.
Thanks,
ChamuHi,
the CRM sales order cannot be extended using set types. Set types are a functionality that is limited to products.
You can however enhance the orders by using the easy enhancement workbench (ransaction EEWB). It will allow you to add specific fields to all levels of the sales document and will take care of ALL the objects that are necessary to update and maintain he fields (functions, screens, bdocs, bapi's,...)
Depending on you system, it will also generate the update modules for R/3 (don't bet on it). Otherwise you'll have to program the extraction and mapping of the new fields in R/3.
Michael. -
I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. It instructed me to hold power button to shut off and then press again to restart. Same error message keeps coming up and computer won't boot to home screen.
Error message:
Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
\"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
Debugger called panic
Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
THANKS FOR ANY HELP.
ROBBBoot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!
Which I get. But clicking on that link you provided does not give you the option of choosing between 32 and 64 bit installers.
Yeah, that was certainly a 32-bit installer file being referred to in the other message, too. (The 64-bit installer file is called iTunes64Setup.exe.)
Just in case it's an issue with your normal browser not working properly with the system-detection equipment on the page (there's a javascript control that checks for operating system specifics, and is supposed to deliver the correct Mac or Windows installers), let's try a different web browser for the download. If you use Firefox instead of IE (or vice versa), do you get offered an iTunes64Setup.exe instead of an iTunesSetup.exe? -
Error Message "No batch input data for screen SAPMF05A 0700" for FV60&FB60
Dear All,
I doing a BDC Upload program for Create Vendor Invoice and Park using FV60 ,But i can't upload successfully by Batch Input method and i am gettin the Error Message "No batch input data for screen SAPMF05A 0700'.I tried using FB60 and got the same error message. When i do in the direct method i can able to do it ,But can't park the document successfully and can do it untill sumilate only.
How to overcome this issue and if you already encounter this kind of problem please advice me.
Thanks in Advance.
DeesanthHi,
Below is my recording.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'INVFO-ACCNT' gwa_inv_up-lifnr.
perform bdc_field using 'INVFO-BLDAT' gwa_inv_up-bldat.
perform bdc_field using 'INVFO-XBLNR' gwa_inv_up-xblnr.
perform bdc_field using 'INVFO-BUDAT' gwa_inv_up-budat.
perform bdc_field using 'INVFO-MONAT' '9'.
perform bdc_field using 'INVFO-BLART' gwa_inv_up-blart.
perform bdc_field using 'INVFO-WRBTR' gwa_inv_up-dmbtr.
perform bdc_field using 'INVFO-WAERS' gwa_inv_up-waers.
perform bdc_field using 'INVFO-XMWST' gwa_inv_up-xmwst.
perform bdc_field using 'INVFO-MWSKZ' 'P0'.
perform bdc_field using 'INVFO-SGTXT' gwa_inv_up-sgtxt.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=PAYM'.
perform bdc_field using 'INVFO-GSBER' gwa_inv_up-gsber.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=BS'.
perform bdc_field using 'INVFO-ZLSCH' gwa_inv_up-zlsch.
cnt = 1.
cnt1 = 1.
clear gwa_inv_line.
loop at gt_inv_up into gwa_inv_line where indic = 'D'
and count = gwa_inv_up-count.
if cnt1 gt 1.
concatenate 'ACGL_ITEM-MARKSP(' cnt ')' into fld.
perform bdc_field using fld 'X'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=0005'.
endif.
concatenate 'ACGL_ITEM-HKONT(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-lifnr.
concatenate 'ACGL_ITEM-SHKZG(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-shkzg.
concatenate 'ACGL_ITEM-WRBTR(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-dmbtr.
concatenate 'ACGL_ITEM-MWSKZ(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-mwskz.
concatenate 'ACGL_ITEM-SGTXT(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-sgtxt.
concatenate 'ACGL_ITEM-GSBER(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-gsber.
concatenate 'ACGL_ITEM-KOSTL(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-kostl.
concatenate 'ACGL_ITEM-PROJK(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-posid.
concatenate 'ACGL_ITEM-FISTL(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-fistl.
concatenate 'ACGL_ITEM-FIPOS(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-fipos.
concatenate 'ACGL_ITEM-GEBER(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-geber.
perform bdc_field using 'BDC_CURSOR' fld.
cnt1 = cnt1 + 1.
endloop.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=BS'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE' '=BP'.
call transaction 'FB60' using gt_bdcdata mode 'N' pdate 'S'
messages into gt_bdc_messages.
Thanks,
Deesanth -
I have now had two error messages - the first one looked for this script: Script: resource://gre/modules/XPCOMUtils.jsm:258. The second one (today) looked for Script: resource://gre/components/nsPrompter.js:68.
I have reset my word template, also reset word registry for data and options (as per Microsoft's help pages) for both those 'fixes' there was an initial improvement, but the problem happened again after I reposted on my blog today and then went to Windows explorer to view my files. It seems to 'seize' as I select a file, so that the preview does not appear (for up to 15-20mins).
I see on the internet using the second script as a search just now that one other has had a similar problem and one also since Mozilla 4 upgrade. My problems have also been pretty much since I upgraded.
It happens (apart from my fixes) every time I go to look at a word document via Windows explorer. Excel files are less affected.
One web suggestion is to clear the cache, but I am hesitant to lose all my passwords unless I have to.I still have the problem although I uninstalled Mozilla (clearing the cache didn't work and neither did Word diagnostics), so have ended up thinking it could be Norton (the manual update worked x1) or Windows. Today I found an answer: disable the preview pane in Windows Explorer - there's a history of problems with this view.
-
After many months of non-use, when I tried to open Photoshop CS4 Extended, I got an error message 148.3. "Licensing for this product has stopped working." I need help, please.
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Mylenium -
I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.
It sounds as if your browser and some of your apps are not color-managed. This is pretty typical. Even IE9 is only partially color-managed.
You can expect color-managed and non-color-managed applications to show you different things with the same images. How different will depend upon how different your monitor color profile is from the image's color profile.
For web publication and most general use, experts usually advise saving images with the sRGB profile. If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
You should really try to get your head around color-management by reading more on it. It can seem baffling and it's difficult to understand without some background. A quick web search turns up many overviews. Beware, though, even people writing articles sometimes don't fully understand it.
-Noel -
In my scenario from r3 to CRM,IDOC for r3,which adapter is best for CRM
from r3 to CRM which adapter is best for CRM for customer data
Hi ,
Some more info that might help you make a decision:
CRM Middleware & XI
Will SAP CRM Middleware be replaced by XI
Regards
Vijaya -
Automatic restart of Error-Message in Adapter-Engine (Job?)
Hi,
we are working on PI 7.11 and facing following problem:
Often in message-monitoring error-messages are forgotten because of wrong date-selections by the monitorer (not enough days back). It would be very nice, if there is a function witch is repeating error-messages in adapter-engine automaticly and witch can be scheduled.
Does anybody know something about an excisting program / function on PI?
Regards
JürgHi,
By default if any failure occurs in adapter engine (in case of receiver,during delivery to target system)
it will retry 3 times after a period interval of 5 minutes..this is by default even this can be change if needed with the help of the proeprties at NWA/VA...
but in case of failures at IE level (mappings,...) then you need to schedule the report RSXMB_RESTART_MESSAGES....
search SDN if like to know more about the reports...
HTH
Rajesh -
Error message : Vendor Communication language is for item 0000000002
Hi,
We are on EBP 4.0, SP11. Classic scenario.
When the requirement is in sourcing without a source assigned/prederred vendor and the buyer adds a source (in work area) and tries to transfer the requirement back to the worklist by holding the changes there is an error message "Vendor Communication language is for item 0000000001".
This is preventing the buyer from adding a source and holding the change. There seems to be nothing wrong with the vendor. Dont know why this message is flashed.
Can someone suggest what can be done.
If there is a way to change this error message to a warning, will it help? ow can this be done?
Regards,
SrivatsanHi
Check if Communication details are maintained for vendor in Manage Business Partners in SRM browser application.
PS : Reward points if helpful.
Regards
Jagadish
Maybe you are looking for
-
How to comment in smartform for text value in abap
how to comment in smartform for text value in abap. i want to comment text value which is coming in output From drag and drop option i had dropped an item text in text window and now i dont want to delete it i just want to comment it so can any one h
-
I am trying to upload a file using JAX-WS webservice which is deployed on the weblogic 10.3.5 server.Even before the code reaches the Service Endpoint lot of time is being spent at the weblogic layer. for files less than 10MB the performance is good
-
HELP! My computer crashed and I no longer have anything on iTunes
Can I transfer my music from my ipod to my computer??? I'm scared to plug my iPod into my computer because I'm afraid it will erase everything. I don't have any hard copies of my music because my car was broken into last month and they took all my CD
-
Sales Order Not Checked for Credit Limit
Most of the time, in our course of business, the customer account and BP/Credit limit are setup prior to the input of any order. However, if in the case the customer was setup (BP created in background, but segment/credit limit not assigned yet), and
-
HT1766 How can I tell if my phone is restoring or if it has stopped?
My phone hasn't finished restoring and it's been 2 days, can it be restarted?