Error Message from hardware test

Hi,
I just recently bought a 1 gb PC2700 SODIMM 200 PIN DDR ram (EDGE TECH) and installed it in my 12"powerbook (1.5Ghz) to replace the original 256mb chip in there.
However, I got several application crashes and decided to run a hardware test and I got an error message for the ram:
2MEM/2/4:DIMM1/J31
Does any of you know what does it mean? So is the memory bad? WHat should I do? replace the ram with edge tech or it's the compability, edgetech just won't fit on powerbook? But in the description they said it can be used on powerbook though.
Please help!
Thank you!
Tom

I'm experiencing the same problem, it's really horrible! can anybody give me a clue? Thanks in advance
PB 12" G4 1,5Ghz 1,25 RAM   Mac OS X (10.4.3)  

Similar Messages

  • How do i resolve error code from hardware test

    How do I resolve error code from hardware test.

    by bringing your mac to your local Apple store or AASP for repair.

  • I received an error message from the hardware test (4SNS/1/40000000:TCOP-85.875). Anyone know about this?

    I received an error message from the hardware test (4SNS/1/40000000:TCOP-85.875) Anyone know anything about this? Problem is that discs will not load.

    Reset PRAM and do the hardware test.
    Reset PRAM.   http://support.apple.com/kb/PH18761
    Contact Apple.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • My Muse test site gets error message from Internet Explorer v8.0.6

    My Muse test site gets error message from Internet Explorer v8.0.6

    What's the URL of the page? Where is the site hosted (Adobe Business Catalyst or elsewhere)? How were the files uploaded to the server (Publish, FTP Upload from within Muse, external FTP client)?

  • When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

    When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to? 

    It's not necessary to change the Command N keystroke..
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:   Remove All Website Data
    Then delete the cache.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that didn't help, troubleshoot Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

    To try to resolve this problem, I have done the following actions.
    1 - I have run Disk Warrior.
    2 - I have repaired permissions.
    3 - I have deleted all plist that are either Cannon or Adobe.
    4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
    I am still unable to print PDF's.
    In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
    In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
    Any help would be greatly appreicated!

    Quit Safari.
    Open the Library folder in your home folder as follows:
    ☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
    ☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
    ~/Library
    Delete the following items from the Library folder:
    Caches/com.apple.Safari/Cache.db
    Preferences/com.apple.quicktime.plugin.preferences.plist
    Preferences/QuickTime Preferences
    Relaunch Safari and test.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

  • Error message from Internet Explorer v8.0.6

    My Muse test site is currently on Business Catalyst. The url is http://wfax-test.businesscatalyst.com — my client says that they get an error message from Internet Explorer version 8.0.6 "MuseJSAssert: error calling selector function: error: a security problem occurred". The good news is that this only appears on the "Schedule" page of the site. Any idea what it could be? My client is afraid for me to put the site online because of this error message.

    Hi Artby,
    In your page, you have a link to "http://[email protected]//[email protected]" (Saturday Afternoon at 3:00). This link is technically a valid link, but I'm not sure it is what you intended. If you where looking to create an email there, you should remove the http:// in front of the link and Muse should properly create an email link. If you were trying to go to a website, I'd recommend you check the URL again to make sure you have it right.
    The link is throwing a security error because we have to do some extra processing for some of our links, so we check each of the urls and try to determine if there is extra logic we need. In this case, this link is telling the browser you'd like to "login" to the site qemi.org with the username "apostle". IE 8, by default, will block us from reading information from this type of link in case there is a password, or in case we shouldn't know the username. It is a security measure (thus the error) and should pose no risk.
    If you did intend to have that URL, then this won't quite work at the moment in Muse. To work around this, you could pull out this small snippet into a custom HTML element or something, which Muse won't try and process (though you'd need to remove the class "nonblock" from the link if you copy/pasted the Muse export code).
    Hope that helps,
    Andrew

  • Error message from my time capsule

    I get the following error message from my time capsule when I try to backup my HD:
    There was a problem connecting to the server "XXXXX".
    Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator.

    You have lost all network connection to the TC. This is not so unusual since Mavericks.
    You have listed hardware but the more important part is OS you are running.
    Have you done a restart of the TC? That often gets it going.
    A full network restart in correct order is next. With everything off.. power up modem.. wait 2min.. power up TC.. wait 2min. Power up computers etc.
    Still no luck. Factory reset the TC and start over.

  • ADF-BC/JSF How to display acustom error message from a backing bean

    Hi all
    Can anybody provide an example of how to manipulate the list of error messages from a JSF backing bean.
    In my code I use a different navigation case and this directs the user to the page displaying the error message but I am sure that there must be a more elegant way.
    Thanks in advance
    Thanassis

    Thanks Kris
    I think you 've put me on the right track here, it's just that in my case what I really want to do is prevent my users from editing records not belonging to their own group. This is done via a selectOne table component and then the backing bean code tests if the value #{row.UserGroup} matches the #{bindings.LoggedOnUserGroup.inputValue}. If the values are equal then the beans returns the navigation case to the edit page. Otherwise it returns the navigation case for the "cannot edit" page.
    So what I am thinking is to return null and somehow raise the right kind of exception in order to display the error in the af:messages tag.
    Thanassis

  • Java - Axis2: How to get an error code / error message from the Javascript via SOAP

    Hi
    In our Java applicsation we call a Javascript in a Indesign CS Server using the following code:
    --- SNIP BEGIN ---
    // calls the remote service on the indesign server
    try {
    // create service
    ServiceStub oIndsgnSrvStub = new
    ServiceStub(sIndesignServer);
    // create service parameter
    ServiceStub.RunScriptParameters
    oIndsgnSrvRSParams = new ServiceStub.RunScriptParameters();
    // create arguments with source- and target-file for parameter
    ServiceStub.IDSPScriptArg[] oIndsgnSrvSArgs = new ServiceStub.IDSPScriptArg[2];
    oIndsgnSrvSArgs[0] = new
    ServiceStub.IDSPScriptArg();
    oIndsgnSrvSArgs[0].setName("xml-input");
    oIndsgnSrvSArgs[0].setValue(sSourceFile);
    oIndsgnSrvSArgs[1] = new
    ServiceStub.IDSPScriptArg();
    oIndsgnSrvSArgs[1].setName("output-file");
    oIndsgnSrvSArgs[1].setValue(sTargetFile);
    // define service parameter
    oIndsgnSrvRSParams.setScriptArgs(oIndsgnSrvSArgs);
    oIndsgnSrvRSParams.setScriptFile(sScriptFile);
    oIndsgnSrvRSParams.setScriptLanguage("javascript");
    oIndsgnSrvRSParams.setScriptText("");
    // create runscript
    ServiceStub.RunScript oIndsgnSrvRS = new ServiceStub.RunScript();
    // set parameter
    oIndsgnSrvRS.setRunScriptParameters(oIndsgnSrvRSParams);
    //$$$ there should be an answer returned by the InddSrvr
    // execute SOAP call
    ServiceStub.RunScriptResult oIndsgnSrvRes = oIndsgnSrvStub.RunScript(oIndsgnSrvRS);
    if(oIndsgnSrvRes.getErrorNumber() == 0) {
    oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_SUCCESS);
    bOK = true;
    } else {
    oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_FAILURE);
    bOK = false;
    //$$$ should be set, if there is something returned by inddsrvr
    //oServerProdJob.setErrorMsg(sErrorMsg);
    } catch(Exception e) {
    sError += e.getMessage() + "\n";
    bOK = false;
    --- SNIP END -----
    The problem is that we don't get the error code and/or the error message from the Javascript in oIndsgnSrvRes. The error code is always 0 if I set an Integer value as return in the Javascript. If I set a String, there is an Exception in the Java application.
    Here is the Java script we use:
    --- SNIP BEGIN ---
    main();
    main()
    var sError = "";
    var sXMLInput = "";
    var sLayoutPath = "";
    // get the SDKCodeSnippetRunner object
    var cbpAdapter = app.cbpCbpadapterObject
    if (cbpAdapter) {
    sXMLInput=app.scriptArgs.get("xml-input");
    sLayoutOutputFile=app.scriptArgs.get("output-file");
    sError = cbpAdapter.doProcess(sXMLInput, sLayoutOutputFile);
    return sError; // This give an Exception; if I return an Integer the ScriptResult is always 0
    --- SNIP END -----
    If I try this with the test application from Adobe I get the error code correctly. But in the Java application, using SOAP, I can't get the error code.
    What could be wrong?
    Any ideas?
    Thanks a lot for the support.
    Kind regards
    Hans

    user11340104 wrote:
    Hello -
    i am calling sqlplus from a bash shell script. If the sql statement generates an error, how can I return that error code (unsuccessful) back to the bash shell?
    Well, let google be your friend,
    http://www.google.co.in/search?rlz=1C1GGLS_enIN327IN327&sourceid=chrome&ie=UTF-8&q=sqlplus+error+codes
    There are many threads I guess talking about the same issue.
    HTH
    Aman....

  • 'Cannot obtain error message from server' when trying to use ODBC

    Post Author: Grant C
    CA Forum: Data Connectivity and SQL
    Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server.  The SQL for the report is in a method in an oracle package.
    When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs.  However, when I try to use an ODBC connection I get the following error:
    Database Connection Error: 'Cannot obtain error message from server.'
    The ODBC link is set up as a System DSN, which works fine when I test it.  I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
    Any thoughts?  Thanks.

    Hi Mars-
    It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
    If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
    Have a good day-
    Tom W
    National Instruments

  • Delete windows warnings, error messages from hard drive

    delete windows warnings, error messages from hard drive

    Hello @NeoTaino,
    I have read your post on how your desktop computer is displaying a "delete Windows warning, error messages from hard drive". Did you install any hardware or software recently? What does the full error message state as it appears on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • [svn:bz-trunk] 15090: Bug: BLZ-506 - Unexpanded {0} in error message from LocalFileResolver related to services .configuration.file

    Revision: 15090
    Revision: 15090
    Author:   [email protected]
    Date:     2010-03-29 01:55:44 -0700 (Mon, 29 Mar 2010)
    Log Message:
    Bug: BLZ-506 - Unexpanded in error message from LocalFileResolver related to services.configuration.file
    QA: No - I already tested.
    Doc: No
    Checkintests: Pass
    Details: Applied customer's patch.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-506
    Modified Paths:
        blazeds/trunk/modules/common/src/flex/messaging/config/LocalFileResolver.java
        blazeds/trunk/modules/common/src/flex/messaging/errors.properties

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • Flash Player error messages from browser?

    Hello.
    So a client I'm building assorted things for gets these annoying error dialog boxes popping up in web pages that I never see myself. But they are akin to those I would see if I were running a SWF locally from my hard drive in my Flash Player. I've tested for these errors repeatedly on different servers and different computers and am coming to the conclusion that there is something peculiar about the way their Flash Player in their browser(s) is configured. Have they somehow installed a debug mode of Flash Player? Have they turned on some annoying verbose mode? If so how do I tell them how to turn it off so that they can realize that the way things look in their office are not remotely representative of the way Flash is rendering things on 95% of the computers in the world (and 100% of the computers I have tested things on)?
    Thanks for your time.

    I have searched through every book, forum, and found nothing
    on suppressing Flash Player error messages from the browser. If
    it's really not possible, this is terrible news. It's nice to think
    that we'd encapsulate everything in try catch methods, but come
    on....

  • Error message from the source system, Caller 09 contains an error message.

    Hi,
        Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.   "
    Can any body help me out of this situation what to do and how to resolv ethe problem.
    Thanks and Regards,.
    Taps....

    Caller 09 is a very common issue - please search the forums before posting....
    Arun

Maybe you are looking for