Error message in a BADI getting displayed in a popup instead of status bar

Hello All,
I have implemented a BADI in ECC6 to prevent the change of formula in ERP from transaction O3I8.
The BADI gets called on clicking 'Save' from transaction o3I8.
Within the BADI i am giving an error message using the following command:
Message e000(ZABC) .
However , the message gets displayed in a pop up instead of the status bar .
The same is for information and warning messages.
Any suggestions on how to display them in the status bar ?
TIA
Regards,
Vartika

Hi Brad,
The checkbox to display messages in pop-up is already switched off.
Still themessages are getting displayed in pop-up.
Regards,
Vartika

Similar Messages

Get error message e auth bad device key or pkcs12

windows 8 os did a system restore then when I tried to download a book from my library I get error message
e auth bad device key or pkcs12
It was working fine before the restore

How To Change the Authorized Adobe ID
http://www.adobe.com/go/digital-editions-createID
What do you do if your copy of Adobe Digital Editions is authorized with the wrong Adobe ID? This can happen if you’ve started using a different Adobe ID or you somehow messed up the authorization in the past.
If you’re trying to open an ebook when Adobe Digital Editions is authorized with the wrong Adobe ID, you’ll get an error message like: “License fulfilled by a different user” or something similar referencing licensing or authorization.
Important note: If you have some ebooks that do require your current authorization, those will become unreadable if you authorize with a different Adobe ID.
deauthorize
The first thing to do is deauthorize Adobe Digital Editions. This will remove your current authorization.
1. Open Adobe Digital Editions
2. On your keyboard, simultaneously press the Ctrl, Shift, and D buttons (if on Windows) or the Cmd, Shift, and D buttons (if on a Mac)
3. Click the “Deauthorize” button
After this you should close Adobe Digital Editions, and then open it again.
re-authorize
If you’ve followed the steps above, your copy of Adobe Digital Editions is no longer authorized.
Open Adobe Digital Editions
Adobe Digital Editions will behave as if you’ve just installed it, and will prompt you to enter your login information for your Adobe ID. Use the Adobe ID account information that you want to use to authorize Adobe Digital Editions.

I have several episodes of a TV show that say "download error, tap to retry" and when I do it just repeats that error message. Can I get it to work? If not can I get reimbursed for the episodes I'm missing? I'm using an iPad one which has worked fine B4

I have several episodes of a TV show where it says download error, tap to retry and when I do it repeats the error message. Can I get it to work or get reimbursed for the ones I'm missing? I'm using an iPad 1 which has worked fine for all the others.

Hi AlpineJean,
I'm sorry to hear you are having issues downloading some episodes to your iPad.
I would first suggest you sign out of your iTunes account on your iPad, restart the device and sign back in.
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
Click on the link below for additional troubleshooting steps with more details and screenshots.
I've quoted some helpful highlights for you:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
To view or download previously purchased:
TV Shows on iOS
Open the iTunes Store on your device.
Make sure you are signed in with the same Apple ID you used for the original purchase.
Tap More from the bottom navigation bar.
Tap TV Shows.
Locate the TV show episode or series you would like to download.
Once you've located the TV shows you are looking for, tap the download button.
The TV show will begin downloading.
Previous purchases may be unavailable if they have been refunded or are no longer on the iTunes Store. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.
If this does not resolve your issue, please follow these instructions for support from the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Have a great day!
- Judy

I installed Photoshop Elements 12 and its icon is on desktop, but when I launch it, I get error messages. How to get it working?

I installed Photoshop Elements 12 and its icon is on desktop, but when I launch it, I get error messages.
How to get it working?

My guess is that you won't be able to do much if you threw away the serial number before using it. The serial number will not have been externally visible on the box though... doing that would make it available for use by anyone who sees the box in any store.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
If you remain unable to locate the serial number you might need to head back to wherever you purchased the product to confirm whether or not you might have thrown out the serial number or if it could even possibly have never been provided.
Beyond that you need to resolve serial number issues with ASdobe Support directly. Here is a link for chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

TS3899 I am unable to get mail, I am getting an error message that says cannot get mail, the connection to the server failed.

I am unable to send or receive mail. I am getting an error message that says, cannot get mail, the connection to the server failed

Hotmail IS having problems:
http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
http://www.engadget.com/2013/08/14/outlook-outage/
http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
http://mashable.com/2013/08/14/outlook-down/
http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

HT203167 I'm getting 'err = -1450' error message, how can i get these songs downloaded?

I'm getting 'err = -1450' error message, how can i get these songs downloaded?

Run the license repair tool. Carefully follow the instructions for your version of OSX.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html#main_Solutio n_2__Run_the_License_Repair_Tool

Error message from a BAD PDF

I am using Adobe Reader to render PDF documents as a part of a process and then convert it into TIFF. Some of the documents that come in are corrupt PDF documents and cannot render itself in the reader and hence cannot be converted. This is the error that the reader throws:
ADobe reader could not open "test.PDF" because it is either not a supported file type or because the file has been damaged(for example, it was sent as an email attachment and wasn't correctly decoded)
Now, the process is automated with no human intervention. with the advent of this error message, since there is a modal dialog box waiting for a response from the user, the process is interrupted and needs human intervention.
My question is simply this. Is there an API i could use where i can figure out beforehand if the PDF is bad so i can reject such files early on? research shows that using the adobe forms server which has the PDF utility services, there is a query "Is a PDF document" that is available. I do not want to use a server product.
Is there any other ADOBE product that exposes something similar?

I guess i forgot to add that piece of information. WE do not create the PDFs. We receive PDFs from external sources over which we have absolutely no control and that explains why we get such corrupt documents in the first place. I was just wondering if there was a simple API event/method/means attached to any ADOBE product which is compatible with .net that tells me if the PDF is corrupt UPFRONT.

Elements 9 Error Message Cannot Up Date Intel Display Driver Why?

Running Windows 7 64 Bits
Today I opened Adobe Elements 9 to find another problem out of the blue why things change I haven't a clue! Error message pops up saying the following:
Update Adode Display Driver detail : Intel (R) HD Graphic 2000-3.00-Build 9.17.10.29.32.
Also maybe as a result of not having this update the Timeline and the video in the viewing screen will not keep pace. In fact the video viewing window doesn't move at all unless you click on a particular scene now only shows that scene no rolling video. Yesterday it wasn't a problem why it changed I don't know. I was advised by ATR I set my updates to manual so there has not been any updates so nothing should of change right?
Can you send me the link that updates that particualr driver? I went to my computer manufacture web site and down loaded the latest updates for my system then I restarted my computer still the same Adobe error message same problem. Then I went to Intel website updated the latest driver updates restarted my computer still got the same adobe error message and still have the same viewing screen problem? Help Please? I'm lost and I'm a rookie so speak plan English please no technical terms please? Thank you

waterworshipper
Many many apologizes. In the screenshot in post 5 I circled Program Files instead of Program Data although I wrote Program Data in the written instruction elsewhere. Please watch this post for the correction.
Very sorry. You did great. I messed up.
Correction
(Since I cannot get back into Post 5 to edit it, I going through the process of getting Post 5 deleted. What follows here is the replacement.)
waterworshipper
You can do it. Let us go step by step
Start Button
Click Computer
Double Click Local Disk C
You should see a list similar to the following:
Double click "Program Data" circled above.
When you do, you will get another list showing some folders etc. Find the folder named Adobe and click on it.
(At that point, make sure to scroll all the way to the top area to make sure that you are not missing Adobe.)
When you do, you will get another line up of folders. Find specifically the folder named Premiere Elements and double click that.
When you do, you will get another line up of folders. Find specifically the folder named 9.0 and double click that.
When you do, you should see the following:
As the screenshot immediately above shows, right click the BadDrivers.txt file and select Delete.
At that point, you close out of there.
Reopen Premiere Elements 9.0/9.0.1 and see if the video card error and other problems are gone.
Please give this another look. If you run into difficulties following my instructions, then please indicate where and I will rewrite them.
Thanks.
ATR
If you have Windows 7 64 bit computer, the location for the BadDrivers.txt file should be in the corrected information just posted.
Again sorry for the detour.

I am getting this error message when trying to get to a college webpage Firefox doesn't know how to open this address, because the protocol (html) isn't associated with any program.

I am trying to get to a college webpage for information and get this error message from firefox Firefox doesn't know how to open this address, because the protocol (html) isn't associated with any program.
== This happened ==
Every time Firefox opened
== whe trying to access webpage

Is this coming from a link, or from something you are trying to type in the address bar?
Try replacing the "html" at the start with "http",
so if you have html://somesite.edu,
change it to http://somesite.edu.

Cannot use program, not supported by architecture? I have a MacBook running 10.5 and have a Snow Leopard upgrade disk to 10.6.3, and that is the error message that I keep getting as to why my update won't install.

I have a MacBook that I am trying to upgrade to Snow Leopard so that I may upgrade it then to Lion to make better use of my iPad and some of the n we tools that Apple has made available in Lion. I have checked and double checked that my MacBook meets the hardware expectations, and it does exceed the ones for Snow Leopard. however, every time that I try to run the install disk it tells me that the program is not supported by the current architecture. I have even tried to backend the processes by opening the install folder with "View Package Contents" option, but it still gives the same error message! Someone please help!

Obtain one of these Snow Leopard DVDs instead. They are not expensive.
To get one, there are some details at this link.
https://discussions.apple.com/thread/4368218

Regarding Error message in ME_PROCESS_PO_CUST badi for validation.

hi Friends,
I am Using ME_PROCESS_PO_CUST badi for validation in Purchase order (ME21N),
For that I implemented PROCESS_ITEM method which fires during each row now i add another validation in same implementation for plant should be same through out the all line item. Now following code is woking fine but when for second line item user changese plant then it shows error message as per logic which is fine but even after changing plant to correct one the error message is still coming why is it so?
following is my current validation code
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM.
DATA:ls_poitem TYPE mepoitem,
       ls_poitem_set TYPE mepoitem.
DATA:ls_poheader TYPE MEPOHEADER.
DATA:lm_poheader TYPE ref to IF_PURCHASE_ORDER_MM.
DATA:w_mara TYPE mara.
DATA:IT_ZMMTBL039 TYPE STANDARD TABLE OF ZMMTBL039 ,
       WA_ZMMTBL039 TYPE ZMMTBL039 .
DATA:ls_poitem1 TYPE mepoitem.
DATA:V_KUNNR1 TYPE KNA1-KUNNR.
DATA:V_KUNNR2 TYPE KNA1-KUNNR.
DATA:W_WERKS(4),
       w_werks_tmp(4),
       w_flag(1).
ls_poitem = im_item->get_data( ).
lm_poheader = im_item->GET_HEADER( ).
ls_poheader = lm_poheader->GET_DATA( ).
IF ls_poitem-werks IS NOT INITIAL.
    w_werks = ls_poitem-werks.
    import w_flag to w_flag from MEMORY ID 'FLAG'.
    if w_flag is initial.
      w_flag = 'X'.
      EXPORT w_werks_tmp FROM w_werks TO MEMORY ID 'MEMO1'.
      export w_flag from w_flag to MEMORY ID 'FLAG'.
      clear: w_flag.
    endif.
ENDIF.
IMPORT w_werks_tmp TO w_werks FROM MEMORY ID 'MEMO1'.
break swaroopb.
IF ls_poitem-werks NE w_werks.
      MESSAGE E010(zparts) with 'Different plants are not allowed in single PO.'.
ENDIF.
CLEAR: WA_ZMMTBL039,w_mara.
REFRESH:IT_ZMMTBL039[] .
SELECT *
    INTO TABLE IT_ZMMTBL039
    FROM ZMMTBL039
   WHERE bsart EQ ls_poheader-bsart.
IF sy-subrc EQ 0.
    CLEAR: WA_ZMMTBL039,w_mara.
    SELECT SINGLE *
      INTO w_mara
      FROM mara
     WHERE matnr EQ ls_poitem-MATNR.
    IF SY-SUBRC EQ 0.
      READ TABLE IT_ZMMTBL039 INTO WA_ZMMTBL039 WITH KEY bsart = ls_poheader-bsart
                                                          mtart = w_mara-mtart
                                                          spart = w_mara-spart.
      IF SY-SUBRC NE 0.
        MESSAGE E009(zparts) WITH ls_poitem-MATNR w_mara-spart ls_poheader-bsart .
      ENDIF.
    ENDIF.
ENDIF.
end method

Hello Swarup
Since you want to compare all items together (having the same plant) I would suggest to implement this logic either in method CHECK or POST of the interface.
However, if you want to make your checks within the PROCESS_ITEM method then you should change your logic.
It does not make sense to work with the ABAP memory within a BAdI implementing class because the class itself is your "memory".
I would use the following logic to implement your validation:
lo_poheader = im_item->get_header( ). " retrieve header instance
lt_items = lo_poheader->get_items( ).   " retrieve all items
ls_detail_x = im_item->get_detail( ). " details of currently processed item
LOOP AT lt_items INTO ls_item.
    ls_detail = ls_item-item->get_detail( ).
    IF ( ls_detail-werks NE ls_detail_x-werks ). " validation failed
    " do something...
   ENDIF.
ENDLOOP.
However, I would prefer to do this kind of validation in CHECK or POST method.
Regards,
Uwe

My Apple G5 using operating system 10.6.8 keeps locking up. I get no warning or error message. I do get some intermittent screen distortion. Any ideas as to what could be causing this and how i get rid of this problem? Complete system re - install? N

My mac keeps locking up it s Power mac G5 Intel using 10.6.8 OS.X. I get no warning or error messages it just locks up and the only way to get it to work again is to depress power button and restart. Its random intermittent and incredibly frustrating. I do get some screen distortion from time to time and wondered whether it may be a graphics card issue or whether it could be solved with a complete system re-install and OS upgrade?

According to everymac.com, your Mac came with Tiger, 10.4.x and can't go any higher than Lion, 10.7.x.
It would have come with gray, machine specific disks. Since there's no reason to install 10.4.x first, and then Snow Leopard over that, just purchase a retail copy of Snow Leopard for $20. What you won't get with the retail version of SL is the iLife suite (Garage Band, iDVD, etc.) that were on the original bundled disks, but you can purchase iLife on Amazon pretty cheap, and get newer versions besides.
When you get Snow Leopard, you can boot to the DVD, erase the drive and install everything clean. Hopefully, you issue is only software, and not hardware related.

Error message when trying to get iOS 4

When I click the "Update" button in iTunes, in the Summary tab when my iPhone is plugged in, I get an error message that says "This version of iTunes (9.2.1) is the current version." (I have Mac OS 10.4.11, so that's the most current version of iTunes I can support.) But I'm not trying to update iTunes, I'm trying to update iOS. iTunes seems to have its wires crossed? I've never had this problem until recently.

Hello chindeepchow,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#3000
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Have a nice day,
Mario

ERROR MESSAGE -`SKYPE CANT CONNECT`` - GET HELP H...

URGENT HELP PLEASE! I CANNOT ACCESS SKYPE
Since yesterday 22 April 2014 - I am getting the same error message.
the skype help connection wizard gives 2 options:
1. contact network administration;
2. restart skype wait 2 minutes for it to reconnect automatically.
This I have done dozens of times and it doesnt happen. I am still without skype connection and have money invested in their account.
My question: is there anyone I can contact by mail, phone, at SKYPE ADMINISTRATION to solve this problem soon? I need to contact my handicapped son everyday through Skype we live in different countries, he needs my help daily.
I don´t know what else to do or who to ask for help.
Thanks a million for any hints.
Tessa

jazzie_97 wrote:
Ugh I thought so :/ Well because I have a school laptop I can't download programs unless I ask the techy guys at my school and school is over til Feb. So is there a way i can get the files for the new version on my laptop because thats how I got theversion I have now.
If this is confusing, I'm sorry.
Try this Lessmsi method:
http://community.skype.com/t5/Windows-archive/Impossible-to-install-v6-13-0-104-Error-1603/m-p/287...
Be aware that if you want to install the currently latest 7.0.0.102 version, then you should use SkypeSetup_7.0.0.102.msi file in order to extract Skype.exe and Login.cab files.
SkypeSetup_7.0.0.102.msi file can be downloaded using this link:
http://download.skype.com/msi/SkypeSetup_7.0.0.102.msi
Note that should not run the SkypeSetup_7.0.0.102.msi but save this file to a folder on your computer.
Using Lessmsi application you should extract Skype.exe and Login.cab files from this saved msi-file and then paste these 2 files to Skype installation folder.
Be aware that there is now a new link to the Lessmsi application:
http://lessmsi.activescott.com/

How do I stop an Error Message that I now get on start up after installing Itunes 10.2.2

I have now installed Itunes 10.2.2 twice and continue to get the following error message when starting up my laptop.
AppleSyncNotifier.exe
CoreFoundation.dll not found.
How do I get rid of it?

... let's have one more go at a repair install, this time of Apple Application Support. (That's where the CoreFoundation.dll program file lives.)
So pretty much the same as last time, except this time we select Apple Application Support in Add or Remove Programs and then do a repair install of that.
Any change?
If not, let's try download the MobileMe Control panel, and then installing that. It's a much smaller download than the iTunes installer. (I fear your internet connection charges might be steep out there in the bush.) Here's a link to the installer:
MobileMe Control Panel for Windows
If that installs successfully, does the message go away after the restart? (If so, you can probably uninstall the control panel without the error coming back.)

Error message in a BADI getting displayed in a popup instead of status bar

Similar Messages

Maybe you are looking for