Error message in capacity planning table

Hi,
I am using REM planning table.I enter the planning table by giving the selection criteria of Plant and production line.
System is giving following error message,
the error message and dignosis of the error message is given here.
'No prod. dates for material MTI_FERT011, version 0001, production line 2279'
Message no. REMPT315
Diagnosis
The planned order has no production dates for the combination of material, production version and production line you specified.
This may be as a result of the following, for example:
The planned order was scheduled but not using the production line you selected. (The production line is determined by the production version you entered in a planned order.)
Procedure
One possibility of finding out what is causing the problem is:
To access the planned order from the detailed dialog box in the table via "Change" and reschedule the planned order. Check the scheduling log by choosing "Goto --> Scheduling log". More information is displayed in the log's warning or error messages.
But which master data to be corrected is not known.
Experts please guide me.
Regards,
Ravindra

Hello,
I had the same error while working with the REM planning table, despite the consistency of the data.
Another cause that can lead to the error message REMPT315 is that in the production version detailed screen, "Planning data" table you have entered the routing next to rate-based planning. You must enter the routing (number of the group and the group counter) on the line detailed planning.
After that, choose check again and try to introduce new quantities in the planning table. It worked for me!
Irina

Similar Messages

Operations are not getting despatched in capacity planning table

Hi Experts,
I am using capacity planning table (Graphical) to level the capacities and sequence the process orders. The start date of my orders are very well in future and sufficient capacities also is available in resources. But when I go to CM25 and select one order and click on despatch, system is not despatching it. This is the case for almost all the overall profiles.
The surprising factor is, this function was working fine earlier without any issues. I havent done any changes in configs which will affect capacity planning.
What can be the reason for this? Any thoughts please?.
One more thing. Is there any option to avoid the capacity planning step if Iam using R/3 and manage it by some other way?
Appreciate your earlier reply
Thanks & Regards
Prathib

Most likely you didnt define the rowsource key properly. Please look under <install>/errors folder for any file there.
Also, please read the documentation. There is information there about how to troubleshoot a loading problem. Please always read the documentation and we would appreciate feedback on the documentation.
http://download.oracle.com/docs/cd/E17236_01/epm.1112/iop_user_guide/frameset.htm?launch.html

I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry

I'm getting an error message after importing a table through Dreamweaver into a page developed in Muse.

I'm getting a couple of messages after importing a table through Dreamweaver into a page developed in Muse. I have compared the code of the page with the table with the page before I inserted the table and cannot find anything missing. the web address is http://gourmetdreams.com/weekly-menu.html
How can I clear this up?
I also noticed that when I uploaded the file there was one error: "- error occurred - Access denied. The file may not exist locally, may be open in another program, or there could be a local permission problem."

Thanks for your help! I imported the table into Muse, then exported the site as html and opened it in Dreamweaver. I should've tried that in the first place but gave up when I couldn't edit it in Muse. I didn't know you could edit the html right in Muse. Also, my styling and the images I was using weren't showing up in Muse but once I opened it in Dreamweaver, everything fell into place. AND I could edit it! My client needs to edit this page every week, so I needed to be sure she could do that. She doesn't use Muse but does use Dreamweaver. At this point, I think I'll leave it alone and not try to style it with inline css. Maybe when I get a little more time, I'll try it. I just don't want to mess things up now that the're working.

No Authorization Error message while displaying plan data in the layout

I am trying to execute laypr01 layout in planning area 4EXP0001(Delivered Content). I am getting a NO AUTHORIZATION error message. When I went back to SU53 and I can see that all authorizations have been successful.
Can somebody please let me know if I am missing something?
Thanks for your help.
Latha

Hi Latha,
Run transaction RSSM, go to authorization check log, enter your user. Try execute the BPS layout again, and get the error message.
Then go back to RSSM, and display the Trace by clicking on Trace > Display, and it show you what the authorization problem is.
Hope this helps,
Frank

Display error message in Campaigns - Planning profile templates

Hi experts,
I am facing an issue while trying to display error message in plannign profile template for campaigns.
Issue is that even though i am able to add the error message to the parent campaign message container, it is not being displayed on the UI screen message area(refresh is not happening) until the next screen refresh happens through another event like change of planning profile drop down / f2 pop up being closed on the message area etc.
I need to display the error message as soon as it gets added in the global message container.Is there any way that i can refresh the UI from this method which would display my error message? I think round trip might work here
I am tryign to add the message in the method IF_FLEX_DATA_PROVIDER~MODIFY_DATA of component KFPED_LAYOUT .
But it doesn't get reflected in the message area.
Appreciate a lot if anybody can help me out here.
Thanks
Swapna.

Closing the thread. Resolved myself .
Thanks.
Swapna V.

Error message when opening flex table graphic

Hello,
we're currently implementing our business processes in our CRM 7.0 SP3. This message is about an issue in the area the flex table graphics.
When trying to display it, error message "Error while loading data. Graphic is reset to its initial state." is thrown.
Steps for reproduction:
-) start any search in the web UI
-) In the result table, select "open chart"
-) Select any data to be displayed
-) The error message is shown
I found note 1416295, however, it doesn't deal with this issue.
Any ideas?
Regards
Wolfgang

See my reply #1 in your other thread http://forums.adobe.com/thread/1419961?tstart=0

Where can get IDOC Error Message from Data base tables

Hi ,
i am automating idoc checking process,in which i am getting control record from EDIDC tables,now i need to fetch Error message
using this idoc no.
How can fetch error message text ?
Thanks in advance.
Regards
sarath

Hi its a structure, it doesnt store data.
Take it from the table specified,
Pass STAMID,STAMNO,STAPA1,STAPA2,STAPA3,STAPA4 to function module MESSAGE_PREPARE and you will get the message text.
Also check the function module IDOC_READ_COMPLETELY

How to store BDC error messages into oracle database table?

Hello Experts,
I have a peculier requirement wherein I need to store the error messages occured while executing the transaction using BDC (Call Transaction Method) in an Oracle Database table format. Is that possible, if yes, how?
Thanks in advance.

Hi,
Structure of BDCMSGCOLL.
TCODE -> BDC Transaction code
DYNAME -> Batch input module name
DYNUMB -> Batch input screen number
MSGTYP ->Batch input message type
MSGSPRA -> Language ID of a message
MSGID -> Batch input message ID
MSGNR -> Batch input message number
MSGV1 -> Variable part of a message
MSGV2 -> Variable part of a message
MSGV3 -> Variable part of a message
MSGV4 -> Variable part of a message
FLDNAME -> Field name
Ex :
DATA : BDCMSGCOLL TYPE TABLE OF BDCMSGCOLL WITH HEADER LINE,
BDCDATA TYPE TABLE OF BDCDATA WITH HEADER LINE.
CALL TRANSACTION 'MM01' USING BDCDATA MODE N UPDATE S MESSAGES INTO BDCMSGCOLL.
IF SY-SUBRC 0.
PERFORM ERR.
CLEAR I_MSG.
REFRESH I_MSG.
ENDIF.
*& Form ERR
text
--> p1 text
<-- p2 text
form ERR .
DATA V_MSG(255) TYPE C.
READ TABLE I_MSG WITH KEY MSGTYP = 'E'.
IF SY-SUBRC = 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = I_MSG-MSGID
LANG = 'E'
NO = I_MSG-MSGNR
V1 = I_MSG-MSGV1
V2 = I_MSG-MSGV2
V3 = I_MSG-MSGV3
V4 = I_MSG-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE V_MSG. " Error Message Displayed Here.
CLEAR V_MSG.
ENDIF.
endform. " ERR
hope this will help you.
Reward if found helpfull,
Cheers,
Chaitanya.

Error message- processor capacity being exceeded. Source of hitting ceiling?

New to logic. Working my way through Logic Pro X (Nahmani) tutorial. Early lesson- Loops. Getting error messages that I'm exceeding processor capacity. 4-5 tracks, 2-3 inserts.
MacBook Pro- 10.9.1, 4 gigs ram, 2.4 Ghz single core i5. Am I being limited by ram or processor speed?
Thanks

:no-idea: Thanks Dry Heat,
I went to the link that you provided. Here is the latest problem...... I can get the computer to run longer than 3 minutes by pressing the Y key when asked during the initial boot-up. After that the computer will not move off that window I described in my 1st post, no matter what I do. I tried restarting the computer and pressed the Delete key to see if that would work and the F1 and F2 keys during the initial boot up, the Bios Window would appear but the computer would shut down, there was nothing I could do to get past this, let alone go on-line to download something. How would I get on-line without an operating system to update the Bios? Remember I am Green and have no idea what the heck I'm doing, let alone what is the real problem here. Its like fighting fire blindfolded! Please help and be detailed on how I should procede. Thanks! Woody

Capacity planning tables.

Hello everyone,
I have a requirement to extract Capacity Planning data from ECC into BW. I see that Capacity Planning report can be generated from CJ2B transaction. I also found that the structure for this is CYSTANDA. For extraction purposes I wanted to find out which tables are used to get this information and how CYSTANDA structure is populated.
Can someone please enlighten me?
Thanks in advance.

Welcome to SCN!
You can determine this very easily yourself by running a performance trace (transaction ST05) against the transaction you are interested in (CJ2B).
Rob

Error Message for a Specific Table Cell

Hello All,
I created a table were one column is defined as an input field. This field needs to be validated against certain rules. When validation fails, I want to highlight just the cells that are in error. The way I have it coded now, when validation fails, all the cells under that column show as if there is an error in all the cells even though only one cell is in error.
Below is the way I have it coded. This method is performed in a loop, so the element has the index number.
Thanks in advance for all your help.
Mike
public int getZstk_Stock_NomsSoawaamt(IPrivateStockNominationsCust.IZstk_Stock_NomsElement element)
   int soawa = 0;
   if(element.getRsawaamt() > 0)
     if(( element.getRsawaamt() >= element.getRsminamt() ) && ( element.getRsawaamt() <= element.getRsmaxamt() ))
       soawa = element.getRsawaamt() * element.getRsmaxamt() / 2;
     }else{
       IWDMessageManager messageMgr = wdThis.wdGetAPI().getComponent().getMessageManager();
       IWDAttributeInfo attributeInfo = wdContext.getNodeInfo().getChild("Zstk_Stock_Noms").getAttribute("Rsawaamt");
       messageMgr.reportContextAttributeMessage(
        wdContext.currentZstk_Stock_NomsElement(),
        attributeInfo,
     IMessageStockNominationsComp.NOT_BETWEEN_MIN_MAX,
        new Object[] { null },
     true);
   return soawa;

Valery,
I do not see the checkbox that says "Mark as question".
The only thing I see different on the main thread and the responses is the radio button solved on my own.
I can send you a screen shot of what I see if you wish.
Regarding the solution you suggested. It works fine. The problem now I am getting is that if I click on a blank cell, the messages below the table are displayed multiple times, but still referring to the one cell that is in error.
Any ideas?
Thanks,
mike

Error message while activating Planning Area in S&OP on Hana

Hi,
While activating my new created planning area, I am receiving the below error. Can you please help and guide me what could be the issue ?
Exception raised from InternalError: dberror(CallableStatement.execute): 129 - transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_ACTIVATEPLAREA: line 898 col 2 (at pos 8757): [129] (range 3): transaction rolled back by an internal error: transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_PLANSESSION_XML_CNSTR: line 1274 col 2 (at pos 8682): [129] (range 3): transaction rolled back by an internal error: transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_PLANSESSION_TABLE_CNSTR: line 125 col 2 (at pos 6123): [129] (range 3): transaction rolled back by an internal error: duplicate column name: T99CUSTDESCR: line 1 col 351 (at pos 350) at ptime/query/plan_executor/trex_wrapper/trex_wrapper_body/trex_query.cc:808
Thanks in advance for your help.
Regards,
Chandan

Hi Aditya,
Please see below the screen shots of MDT and PA.
Regards,
Chandan

Error Message: Creation of Temporary Table "#BIMC_SETS" not possible

Hello,
I am trying to get data from HANA Virtual Data Model (VDM) from MDX connection in MS Excel. The VDM Views and models are visitble after the connection is successfully made.
But when I try to fetch the data, I get the following error:
"Creation of Temporary Table "BIMC_SETS" is not possible".
Can someone let me know how to resolve this?
Best regards,
Akhil

Hi Lars,
I am getting the same error. We are trying to build a role for Adhoc reporting. The role has analytic privilege, object privilege with select on individual models in _SYS_BIC (models we want to expose and part of AP), object privilege on _SYS_BI with select and execute and also object privilege execute on REPOSITORY_REST.
I am able to execute the models using Lumira and Analysis for excel, however getting error with MDX connection.
Also we want to try and restrict direct ODBC access to HANA using query from excel. With the above privileges user is able to see all the M_ views and get data for it. Can we restrict this?
We are on SP6 rev 67.
Thanks,
Aamod

Getting error message while creating encrypted table space

I have created an oracle wallet and while creating table space I am getting the following error..
Please provide me some thougts on this
Wallet status is below
file    /usr/tp/sys/oracle/admin/ofss41d2/wallet    OPEN
the tablespace creation syntax is
CREATE TABLESPACE corxpr_app_dat DATAFILE '/data/oracle/oradata/ofss41d2/corxpr_app_dat.dbf' SIZE 10M AUTOEXTEND   ON ENCRYPTION USING 'AES256' DEFAULT STORAGE(ENCRYPT);
The error is
Error starting at line 7 in command:
CREATE TABLESPACE corxpr_app_dat DATAFILE '/data/oracle/oradata/ofss41d2/corxpr_app_dat.dbf' SIZE 10M AUTOEXTEND   ON ENCRYPTION USING 'AES256' DEFAULT STORAGE(ENCRYPT)
Error at Command Line:7 Column:0
Error report:
SQL Error: ORA-28374: typed master key not found in wallet
I am using Oracle 11.2.0.3.0

Hello Bharati,
         you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
   Jai

Error message in capacity planning table

Similar Messages

Maybe you are looking for