Error Message in through transaction OVA2

Hi All,
In the transaction OVA2 for the Incomplete procedures, we have a warning message set. We want to set a error message instead. Like if there is an Item with prize 0 the system now displays a warning message( as per setting in OVA2) we want to convert this warning to error.
Can any one please help me on this issue.
Thanks and Regards,
Nimisha Deshpande.

Normally the incompletion log will be filled when some constraints (set through customising) are not met. For instance, you can set up a constraint that certain fields are required (allthough visibly not required on the screen). SAP will check that field and when it's empty, an entry in the incompletion log is created.
From the incompletion log the user can navigate to the point of error and correct the error.
Maybe this is overdone for your requirement, but it's just an idea.

Similar Messages

Error message when running Transaction Code = ME84

hi,
i am getting an error message when running Transaction Code = ME84
Error is 'No processing (error message P5 017), No data for chosen selection'
can someone please guide me on this ?

Hi Mahendra,
There are several reasons for the release not happeneing.
1. The issue could be in the selection of release type
2. Scope of selection
3. Strategy profile
Please check whether the selection parameters are considered are right for release to happen.
Regards,
Harish

Display error messages in Call transaction

Hi Gurus,
I have donme BDC using call transaction..can anybody help me in displaying the error messages in call transaction..
A detailed code wud be very much helpful..
full marks wud given
regards
Sahil

hi check this,
PERFORM Z11_BDC_VA02.
      ELSE.
        MESSAGE I013 WITH TEXT-013.
      ENDIF.
ELSE.
          CLEAR V_FLAG.
       MESSAGE E012 WITH TEXT-012.
ENDIF.
FORM z11_bdc_va02 .
*COVER 1
perform bdc_dynpro      using 'SAPMV45A' '0102'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAK-VBELN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBAK-VBELN'
                              wa_head_detail-vbeln.
*COVER 2
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\03'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
*COVER 3
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ITNE'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
*COVER 4
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-KWMENG'.
perform bdc_field       using 'VBAP-MATNR'
                              wa_head_detail-matnr.
perform bdc_field       using 'RV45A-KWMENG'
                              v_kwmeng.
perform bdc_field       using 'VBAP-VRKME'
                              wa_head_detail-meins.
*COVER 5
perform bdc_dynpro      using 'SAPLSPO2' '0101'.
perform bdc_field       using 'BDC_OKCODE'
                             '=OPT1'.
call transaction 'VA02' using it_tab1 mode 'A' UPDATE 'S' MESSAGES INTO
IT_TAB_ERROR.
"CAlling transaction with all screen
Loop at it_tab_error.
if it_tab_ERROR-MSGTYP = 'E' .
clear v_flag.
message I014 with TEXT-014.
else.
clear v_flag.
message I019 with TEXT-019.
endif.
endloop.
refresh it_tab1.
clear V_KWMENG.
ENDFORM.                    " z11_bdc_va02
Reward if helpful,
Gaurav J.
Edited by: GAURAV on Feb 4, 2008 9:10 AM

Error message "no accounting transaction variant assigned for FB60//GL"

Hi Friends,
I created a new document type for GL postings in ECC 6.0. I tried to post a document for this document in FB60.. It displays the error message "no accounting transaction variant assigned for FB60//GL". Can anyone help me solve this problem.
Thanks
Ramya

You need to do the settings as follows:
Go to extended document splitting- define business transaction variant
Here u need to do series of settings.
Pl check your settings here

How to track error message when calling Transaction: va02

Hi all,
    As we all know, when we change an order through T-Code: VA02, system will update modified data to corresponding database. Meanwhile, if our operate is not legal or incorrect on T-code: VA02, system will call corresponding error messages to us.
    Now I want to know:
   1. how to track the error messages
   2. Is there any Tcode such as: SM21 that we can see the message logs after our operation?
Thanks.

Hi ,
message table for call transaction
DATA: BEGIN OF G_T_MSG OCCURS 0.
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF G_T_MSG.
Exucute transaction via Call Transaction
CALL TRANSACTION 'FB01'
                 USING g_t_bdcdata
                 MODE g_l_mode
                 UPDATE 'S'
                 MESSAGES INTO g_t_msg          .
errors will be stpored in the table g_t_msg ..
Thanks .

Error Message in VT02N transaction

Hi Friends,
I need to validate some of the input field values in VT02N transaction. If the validation fails, i need to raise an error message.
I have found the user exit to perform the validation. Now the problem is, after raising the error message, the fields are not getting opened for input. How can i make it open for input.
Plz advice opn this. replays will be awarded with points.

Normally the incompletion log will be filled when some constraints (set through customising) are not met. For instance, you can set up a constraint that certain fields are required (allthough visibly not required on the screen). SAP will check that field and when it's empty, an entry in the incompletion log is created.
From the incompletion log the user can navigate to the point of error and correct the error.
Maybe this is overdone for your requirement, but it's just an idea.

Error message 81447 Excise Transaction Type during Purchase return

Dear Freinds,
I am running an purchase return cycle on non returnable basis (i will not receive the material back from the vendor )through transaction code mmbrl, I create a document and then use J1IS to make an excise invoice , but while making excise invoicing its showing an error message no 81447 "GL account has not been assigned for PLA AT1 in customisation.
So I maintain GL accounts for PLA AT1 in Tax Goods Movement -> Acct Determination-->Specify GL Accounts per Excise Transaction , for Excise Grp /ETT-CEIV/Company code/Sub transaction type (22)
Still it was giving the same error as mentioned above .
So I again maintain PLAAT1 for Excise Grp /ETT-OTHERS /Company code/Sub transaction type (22)
still its giving me the same error .
Now kindly tell me where I am going wrong, am i selecting wrong ETT or sub transaction type.
In my scenario what should be the ETT & Sub transaction type .
Kindly guide .
Thanks

Hi,
What reference document type you are using in J1IS??
It should be MATD. MATD ultimately goes to OTHR. So in your configuration check whether G/Ls are assigned properly to OTHR. Subtransaction type depends upon your business requirement. If you want accounting entry in some seperate account say CENVAT CLrg purchase returns, then you have to use subtransaction type & also needs to assign the same with OTHR by maintaining desired G/L in CENVAT sspe column.
Regards,
Piyush

Regarding error message from a transaction

Hello all,
      I have a scenario where i need to collect all the error message from a trasaction and display it in a pop up.
      i am calling a function module and inturn calling transaction 'FB08' using bdc. i may get one or more error message. if there are more than one messages from my function module then i need to display this messages in a popup.
    Currently i am displaying one message using 'message ID' syntax at the bottom. what should i do to display error messages in a popup if there are more message
Thanks,
Raju N.

use following fm.
CALL FUNCTION 'COPO_POPUP_TO_DISPLAY_TEXTLIST'
      EXPORTING
      TASK             = 'DISPLAY'
        titel            = 'Creation Log'
    IMPORTING
      FUNCTION         =
      TABLES
        text_table       = i_documents_log.

Error message in ME22n transaction

Hi All,
We want to display error message at status bar of me22n transaction for some certain conditon.I am using a user exit where actually i am writing a code.I tried to write like this 'Message E101(ZE) ' but message is not displaying at status bar.
Thanks
Mohit

Hi ,
1 >If message is not getting shown at status bar then is it getting shown as popo up. ?
2 > If message is not at all getting shown then that means your exit is not getting called. Please put a break point inside your exit and exeute me22n and see if your debugger gets triggered.
If Debugger does not get triggered then that mean , either you have not created Project for yoour Exit OR you are using incorrect Exit.
Please revert with your observatins so that can help you further.
Hope this is helpful.
Regards,
Uma Dave

Display Error Message in Co11n Transaction

Hello Experts,
I am using co11n transaction, While saving the transaction i need to display a
error message based on some conditions. I can display a error message but the screen got struck
and it is not returning to the PBO again. Can any one tell me the any Exits is available there in the transaction to display the error messages.
Thanks

Hai,
krupa, what u have to do is, u r using a screen exit right? Dont display the error message inside
the Function Exit. Instead, in the PAi module inside chain endchain of ur screen double click on your module and include the module in the TOPINCLUDE of the Main program( How to find this top include is goto se80-->
select function group XCOF--> EXPAND INCLUDE->LXCOFTOP -
>ZXCOFTOP----->DOUBLE CLICK and open it and put your module here and display ur error message. )
set the breakpoint here it will stop here
Regards,
Viverk
Edited by: vivek selvam on May 12, 2009 8:36 PM

Reg:Error message in MIGO Transaction

Hi All,
I added the new tab strip in MIGO Screen. now i need to make all the fields as mandatory. so using BADI (MB_MIGO_BADI) i gave the mandatory check ( if the Zfield = ' ', then error message) while clicking the check button before posting the material number. But it prevents to proceed further, simply it skips the transaction because of error message. and at the same time 'i should not use the information message'. my requirement is 'Error message should be populated after clicking the check button but it should allow to enter the mandatory fields after the error message'. i.e it should not skip the transaction after the error message.
Please help me.
Thanks & Regards
Vijay.R

Hi
Probably the message is called dynamically, so u should try to check by debug when that message is raised.
U can set a break-point for the statament MESSAGE.
Max

Is it possible to retrict some type of error message in SMQR transaction

Hi experts,
I have a requirement when I use EOIO queue from the HTTP adapter (URL) to post the RFC requests and i need to automatically retry the posting of errored entries in the queue and i could find the web logs that SQMR is the transaction used for automatic retry and also the program RSQIWKEX is can be scheduled to try the reposting of the queue. Now i dont want to repost all the error messages( some thing related to application failure in R/3 needs changing of data ), so it is possible to retrict those transactions from re post ?. Or we need to cutomize this program RSQIWKEX in R/3 to get this job accomplished.
Quick response would be highly helpful.. THanks in advance.
Regards,
Rajesh Kumar T

very specific to smqr , yes, u need to go for customization.

Error message: F3029 - FBZP transaction

Hi Guys,
Let me know if someone how to figure out this issue.
I am trying to delete some entries on FBZP transaction - bank determination - bank accounts, but I got the error message:
F3029 - Clearing acct only allowed for an outgoing bill of exch.pmnt.
Thanks
Daniel Dorta

hi
kindly check if for payment methods which represent 'outgoing payment by bill of exchange' the clearing account needs to be mentioned. otherwise the clearing account need not be mentioned.
thanks
eashwar

Error Message When Running Transaction F.05

When running transaction f.05 to revalue foreign currency items, I am getting an error message" Error 543 FC Valuation SAPF100" for two of the G/L accounts and showing on the report <Expen.> and <Adjust.> instead of G/L accounts shown for debit and credit entries. No document or reversal document is created for these two accounts.
Any help is appreciated.

Thanks for taking the time to reply.
I have checked OB59. The foreign currency valuation method is already defined. and in OBA1, these two G/L accounts are also there. I could not find any field on the G/L master where to assign the valuation method. For some reason, other G/L accounts mentioned in OBA1 are being posted correctly and are generating the documents and reversal documents except these two G/L accounts. For the correct G/L accounts, against the Debit and Credit posting keys G/L accounts are shown while for these two accounts, <Expen.> and <Adjust.> is written at the place of G/L accounts in the report. Can you please tell me from where the system is picking these accounts that are shown for Debit(40) and Credit(50) posting?

Error Message ME083 in transaction MR8M

Hi Gurus.
I've got the following issue:
The user have posted an invoice with invoice reduction. The invoice has six items. The invoice item with correction Id "Vendor error: reduce invoice" has associate a blanket PO item with account assignment category U (Unknow). When the user posted the invoice, he or she didn't specify any account assignment object (G/L Account). The user couldn't specify the account assignmet object because the checkbox "Acct.Assignment Chgable at IR" was unchecked in the Account Assignment Category "U".
Then, when the user try to cancel (reverse) the invoice using the transaction MR8M, he or she obtain the error message "ME083: Enter G/L Account".
I've debuged the transaction code and the error message is generated in the FUNCTION mex_lesen_sachkonto.
Do you help me with this issue?
Thanks in advanced.
Nestor.

hi
a bit confusing
but try following threads
Why am getting this ME083 error in BATCH JOB, where as ONLINE not getting?
http://www.sapfans.com/forums/viewtopic.php?f=6&t=320073&p=971140
http://www.google.co.in/search?hl=en&client=firefox-a&channel=s&rls=org.mozilla%3Aen-US%3Aofficial&hs=ZKV&q=sapME083&btnG=Search&meta=
regards
kunal

Error Message in through transaction OVA2

Similar Messages

Maybe you are looking for