Error message in TRFC 'An SQL error occurred when accessing a table'

Hi all,
Can any one tell what this below error message is about in while go into TRFC
'An SQL error occurred when accessing a table'.
and please tell me how to solve this problem.

Hi
Try to see what all tables are accessed by data source. and see if there is any lock on that..
If some other job is accessing that table - then there might be lock on that which is causing failure..
1) Try looking at ST22 dump also..
2) Try to do RSA3 in R/3 and if see if its is fetching any records or not..
Hoep it helps
--SA

Similar Messages

SharePoint Designer 2010 Error occurs when accessing Edit Form: "The server returned a non-specific error when trying to get data from the data source ..." This occurs when using "" in a calculated column in a SharePoint List

I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123

Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support

Got "Unknown error occured" when access to the Approval page in Project Server 2013

So long time find the solution, but cn't. Pls. help me

Hi,
Let's verify the following:
Whether the issue exists in all of the users? Done a test with a user with full control permission, compare the results.
What is the current SP\CU version installed on Server? deploy the latest CU, compare the results.
Whether the issue exists in other browsers, done a test in another browser, compare the results.
Whether all resources experiencing this error.
"An Unknown Error has occurred" is a generic error message. Please check ULS log for more detail information about the issue.
In addition, as this issue is related to project server, I suggest you create a new thread on project server, more experts will assist you:
https://social.technet.microsoft.com/Forums/projectserver/en-US/home?category=project
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

PL/SQL: ORA-04052: error occurred when looking up remote object.

Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
Kanchana

Hi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009*

SQL Server 2008 R2 { An Error occured when attaching database(s) }

Hello Guys!
I just installed SQL Server 2008 R2 a couple of days ago, on the first day use i can attach database(.mdf) with out any problem.
on the day 2, i keep getting this error:
http://img515.imageshack.us/img515/14/1212i.png
TITLE: Microsoft SQL Server Management Studio
An error occurred when attaching the database(s). Click the hyperlink in the Message column for details.
BUTTONS:
OK
after clicking the Hyperlink this window open:
http://img34.imageshack.us/img34/8766/hyperg.png
TITLE: Microsoft SQL Server Management Studio
Attach database failed for Server 'STARGAZER-PC\SQLSTARMAX'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600.1+((KJ_RTM).100402-1539+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Unable to open the physical file "E:\New folder\DataBase.MDF". Operating system error 5: "5(Access is denied.)". (Microsoft SQL Server, Error: 5120)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600&EvtSrc=MSSQLServer&EvtID=5120&LinkId=20476
BUTTONS:
OK
in that day i reinstall SQL Server 2008 R2, because I'm so confused. after that i try to attach i still got the same error, what i did is i share the folder where the database is.
i open SSMS and try to attach and i attached without any error...
i think this is the 4rth day, untill now everytime i want to attach a database i got this error, and even i try to share the folder where the database is i still got that error.
any advice guys?
Thanks a lot
jhules
if you want to be happy, find something you love to do and do it for free, then find someone to to you for it.

The Error clearly shows that MDF files and LDF files are not matching or LDF file is corrupted.
You can follow either of the one option below
1. Restore a recent backup rather attaching the MDF file
2. Attach single MDF file without LOG File( Warning: All the log transactions will be gone and new log file will be created)
EXEC sp_attach_single_file_db @dbname = 'AdventureWorks2008R2',
@physname = N'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Data\AdventureWorks2008R2_Data.mdf';
Thanks, Aditya Badramraju, _______________________________________________________ Please mark answered if your question is completely answered; vote it as helpful to help others find a solution quicker. This posting is provided AS IS with no warranties
and confers no rights. _______________________________________________________

Runtime error SQL error 3114 occurred when accessing program CX_ w

Hi Friends,
Iam in a big mess . I have one query based on one my Zinfocube.This query ia attached in the workbook .. Previuolsy all was fine , but now whever iam executing this query it is throwing me the exception
Query 0: Runtime error SQL error 3114 occurred when accessing program CX_ with parallel processing via RFC.
and
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist mÃ¶glich
I am not able to get the cause of error ..
Can anybody help me in this regrd as its a bit urgent.
Thanks in advance..

Hi , thanks for replying ,
I have tried running query through RSRT also , its not working still it is giving me the same error .
In st22 it is showing me the follwing dump.
DBIF_REPO_SQL_ERROR
Short text
    SQL error 3114 occurred when accessing program
What happened?
    The system is no longer linked to an ORACLE instance.
    No further operations can be performed on the database.
What can you do?
    You cannot eliminate this error yourself.
    Please inform your database administrator.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The system attempted to access an ORACLE instance to which
    it is no longer linked.
    This situation may arise because the ORACLE instance
    has been stopped due to an error or an external operation.
How to correct the error
    Database error text........: "ORA-03114: not connected to ORACLE"
    Triggering SQL statement...: "CX_SQL_EXCEPTION==============CP "
    The current status of the ORACLE instance cannot be determined.
    It may be still inactive or the database administrator may have
    restarted it.
    In any case, all systems that have accessed the ORACLE instance
    must be restarted after the ORACLE instance has been restarted.
    If you were working on a central system, inform
    your system administrator.
    If you were working on an external local system, inform
    the person responsible for this system.
    If you were working on your own local system, restart
    the system yourself.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_REPO_SQL_ERROR" " "
    "CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
    "NEXT_PACKAGE"
    If you cannot solve the problem yourself and want to send an errornotification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_SQL_ERROR" " "
"CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
"NEXT_PACKAGE"
Thanks in Advance..

I have Lightroom 5 installed on my MacBook Air but when I try to open the program I receive the message "An error occurred when attempting to change modules". I uninstalled, emptied trash and re-installed but I continue to get the same message.

I have Lightroom 5 installed on my iMac which I downloaded (uploaded?) to my MacBook Air (via wi-fi) but unlike the iMac, I'm unable to use the program on the MacBook Air. When I open the program on the iMac and click 'file', (as people using the program would know) there are 21 options - import pics, export, etc, etc - however, in the version on the MacBook Air, opening 'file' gives me four options - New Catalogue, Open Catalogue, Page Setup and Printer - and with that comes the pop-up message "An error occurred when attempting to change modules". Any ideas please?

A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions. You might try doing a repair permissions for your user and/or run LR as an administrator user. I am a PC person so cannot tell you exactly how to do that.
https://forums.adobe.com/message/1457020

An error occurred when attempting to change modules. message after my regist numb?

after I put my regist number appears this message= An error occurred when attempting to change modules.
and I cannot use my lightroom
What to do?

http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom.html

After installing Lightroom 3, we get a message saying "An Error occurred when attempting to change modules"

After installing Lightroom 3, we get a message saying "An error occured when attempting to change modules"
The Lightroom background comes up but I don't have the side information and no arrow to get it.
Can anybody help.
Debbie

Best guess is a permissions problem although you haven't mentioned what operating system you are using.
Have a look at: Error changing modules | Lightroom

Error Message: an error occurred when attempting to change modules

I have seen the link that addresses this problem. Lightroom is updated. I uninstalled Photomax. But the problem with Lightroom continues.

I have this same problem... clean install of the Lightroom trial on Leopard.
By clean, I mean it has not previously been installed- and after install the attempt to open the application results in the popup message about errors occuring when changing modules...
Once "Ok" is clicked the program completes load with a 'blank' screen..
In addition, the Program preferences panel will not load-
any attempt to access a module results in the error message be again presented.
I would hope the Adobe would give this some attention, can't expect to sell me on the app- if I can't get the trial to run?!/

When I click Convert to Word docx, I receive the error message -- "An error occured when trying to access the service." This has been happening for about a week.

Export PDF will not convert a pdf to MS Word. This failure has been going on for about a week. The error message is "An error occurred when trying to access the service." What can I do to get this working again?

Hi,
It seems it was working fine earlier.
Is this happening with all files?
You can try using different browser.
Regards,
Florence

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: Sy

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: System Library/Application Support/Adobe. Any ideas? I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro. This is all I am seeing after Lightroom opens. Thanks!

Thanks to both of you for attempting to help. I finally figured out what was wrong . . . it was a Permissions problem. Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem. I had to add a User and give it Read/Write privileges to Lightroom. The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery. Only a few days left on my trial version! I hope I have time to try it out!

Just purchased Lightroom 5 from Best Buy, Registered, installed...but cannot open it due to the error message "An error occurred when attempting to change modules"..Please help.?.

error message don't allow me to open Lightroom 5. "An error occurred when attempting to change modules"...Please Help..!

I'm in the same situation exactly. I would like to delete, uninstall LR, and then reinstall to see if that will go anywhere. Will I loose my option for a second computer install later???

PARSE_APPLICATION_DATA Error during XML = ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789

Hi Experts ,
i have a scenario proxy to soap where i am getting error while getting the response .
we are sending the request successfully and getting response .some times we are getting in proxy level error below
PARSE_APPLICATION_DATA Error during XML => ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789 (Cha
Please help us to fix this bug in proxy response.
Regards
Ravi

Hello Ravinder,
Can you please post the complete stack trace, it seems to be some fields are getting truncated i,e data sent from the program to the proxy object might be violating some length restrictions.
Please check your message interface field lengths and what is being passed to the proxy.
Regards,
Ravi.

I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!

I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!

Do you mean trying to purchase an iPhoto book? Try rebooting and ordering again. If that fails Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
OT

Error message in TRFC 'An SQL error occurred when accessing a table'

Similar Messages

Maybe you are looking for