Error Message in UIX Editor when using a custom parameter to a template

In my UIX template, I have a custom attribute "selectedTab", as advised in the documentation:
<type base="ui:pageLayout">
<!-- define the template's type information -->
<namedChild name="topHead"/>
<attribute name="selectedTab" javaType="int"/>
</type>
I use it in the UIX file, again as advised by the doc:
<myTemplate:SalmonTrap title="SalmonTrap - Live Accounts" xmlns:myTemplate="salmontrap" selectedTab="0">
It works but I get the following message when I compile or try to GUI edit:
Error(0,0): Attribute selectedTab not defined on element myTemplate:SalmonTrap
What do I do wrong?

Eric,
That should work and not show the usage of selectedTab as an error. (You may need to restart JDev after creating the template for it to work right.) In fact, when you select the SalmonTrap component in the structure pane, the property inspector should actually show you that selectedTab is an attribute you can set. I can make this work.
One other thing to check: is the UIT in the same project as the UIX file? I'm not positive this is required for the design-time to work, but it may be.
-brian
Team JDeveloper/UIX

Similar Messages

  • Error message: incompatible image size when using IMAQ in image processing

    I want to do low pass filter and convolution on an acquired image. When I connect the image to the VI, the message: incompatible image size appears. I have tried to set the border to 3 in IMAQ create, but it does not help. Anyone know how to solve this problem?

    Hello,
    Which particular VI is outputting this error? Did you try larger border sizes (5,7)? What is the exact error code and error string?
    Regards,
    Yusuf C.
    Applications Engineering
    National Instruments

  • How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

    how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

    It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

  • My Reminders app will not open. When I try to open it, quits and gives me an error message: "Reminders quit unexpectedly while using the CalDAV plug-in." My Reminders is synced with my iPod touch, and it is fine on that. How do I fix it?

    My Reminders app will not open. When I try to open it, it quits and gives me an error message: "Reminders quit unexpectedly while using the CalDAV plug-in." My Reminders is synced with my iPod touch, and it is fine on that. How do I fix it?
    Also, the Calendar is loading very very slowly, and sometimes it quits and gives me the same error message as above.

    The problem has been fixed with the most recent OS X software update.

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state".  What is this?

    When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state".  What is this?

    See if this post by turingtest2 fixes it : key not valid for use in specified state

  • Ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    Jennifer...
    Follow the instructions here >  iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Error message to be thrown when multiple enteries are not entered

    Hello Guys,
    I have used a select-options with no intervals in the selection screen.
    If the user enters one value in the range, its working.
    But I want a error message to be thrown when only one entry is entered. User should enter more than one entry always.
    I used low and high but its not working.
    Kindly guide me.

    No intervals only works on the main screen.  If the press the right arrow and go to the ADDL choices, they can choose the entire database table in a single range....Your test is, therefore, too simplistic.  If you want to limit this on both the main and the additional choices screens, you have to implement Function Module SELECT_OPTIONS_RESTRICT in the Load-of-Program or Initialization event.
    Why not select from a table into a work table where the values are IN the select-options and see how many the user obtained?
    Something like this:
    Select <your field> from <your table> into table <your internal table>
    where <your field> IN <your select-options>.
      if lines( <your internal table> ) lt 2.
        <your error message>.
    endif.

  • Error Message "This iPhone cannot be used because..."

    I am trying to use my iPhone with a new laptop. I installed iTunes most recent version and it works fine.
    When I plug my iPhone in, I get an error message: "This iPhone cannot be used because the Apple Mobile Device service has not been started."
    I have been using my iPhone (and various iPods and iTouches). I have never had a problem plugging them in and POOF, they show up in iTunes. None of them will show up in iTunes in my new computer.
    What am I doing wrong?

    Is this any good:
    http://freeiphoner.com/apple-mobile-device-is-not-started-iphone-problem/

  • HT204291 Error Message: "airplay tv is in use by someone else" Please help?

    I.m trying to use Airplay Mirroring to stream content from my iPad 2 to my HDTV.
    Already using Airplay TV successfully to stream content from my iTunes library using the Remote control but now I want to add my iOS devices but I'm getting the following conflict / error message when I try to turn mirroring on on my iPad 2:
    Error Message: "airplay tv is in use by someone else"
    Please help?

    Set a password by using the "Airport Utility", then it will work again.

  • HT202159 I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to downlo

    I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I have an error message that comes up when i try to get into itunes... 0x 80092013 can anyone help

    i have an error message that comes up when i try to get into itunes... 0x 80092013 can anyone help

    Hi Katy19831,
    Thanks for using Apple Support Communities.  These articles may help with the error you're seeing:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    - Ari

  • HT201210 Error message 3014...when loading iOS6, what is it?

    Error message 3014...when loading iOS6. What is it? How do you fix it?

    Do you have a "modified" iPhone? Technical term can't be used. If so, you need to restore your iPhone first. Always back up before hand though.

  • Unable to capture error message while creating an SO using bapi

    Hi,
    Can anybody suggest how to capture the error message while creating a SO using BAPI.
    I have developed a customeized BAPI and using the BDC format to create the SO.
    Note: i am using a call transaction method for the BDC.
    I am sending the message into message1.
    but i am unable to send the same into an internal table
    shyam.

    Hi Shyam
    If my understanding is correct, you are performing BDC process within the customized BAPI...
    And you want to collect the messages from BDC to an internal table and pass to the output.
    Proceed as below:
    1. While calling BDC, use CALL TRANSACTION .... with addition: <b>MESSAGES INTO itab</b>. The structure of itab should be like <b>BDCMSGCOLL</b>.
    2. Now the messages will be collected in ita.
    3. Prepare the messages using FM: <b>FORMAT_MESSAGE</b>
    4. Collect to the returning table.
    Hope this helps...
    Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
    Kind Regards
    Eswar

  • I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    Hello AKCamus
    To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for

  • Merge even and odd pages

    My printer won't do duplex scan, and I need to scan a large amount of 2-sided text. So I'm going to create one document of the odd-numbered pages, and another of the even-numbered pages. I know I can manually combine them into the right order, but I'

  • SAP Enqueue Server needs 800 MB in NW CE SP3 Trial

    We are  very sorry that  the SP3 download is delivered in an installation state that consumes more memory then it really needs. To solve this issue you can change some values in the profile CE1_SCS01_<hostname> in directory C:\usr\sap\CE1\SYS\profile

  • Has anyone set up their mail through Roadrunner?

    For some reason it's not syncing my email so I have to do it manually. I've added all the incoming and outgoing information and it gives me the error message of "Cannot Connect Using SSL". Does anyone know what this means? I also tried to set up my g

  • E50 Font size is too small

    yesterday I bought a Nokia E50. this is really nice one. I love it. but the problem is the font. Its too small. even some times I can't read it, if i am on move. I think NOKIA should solve this problem. Because its a major problem. Anyway, anybody kn

  • Will loading a movie to iPod really wipe out all audio files?

    Hi folks: In the midst of loading CD collection into Video iPod 80GB. Decided to load a DVD as well and received a warning message that "loading movie will delete all files". Has anyone seen this? I can't imagine that Apple designed a product that is