Error message Internal Battery 601. How do I get a replacemen​t? HP G71 Notebook

I have 2 HP G71 Notebooks - with WIN 7; 4:0 GB; 64 Bit and both dispaly the Internal Battery 601 error message.  How/where do I get replacement batteries?

Replacement battery is a HP EV06
you can buy it from HP or Amazon, beware of really inexpensive non HP batteries, they do not last.
http://shopping2.hp.com/en_US/home-office/-/produc​ts/AC-Adapters-and-Batteries/Laptop-Batteries/KS52​...
http://www.amazon.com/HP-462889-761-462889-542-462​890-542-462890-761/dp/B006LPMGT6/ref=pd_cp_pc_1

Similar Messages

  • My iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?

    my iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?

    No need to Double Post... It is considered impolite.
    https://discussions.apple.com/message/20652820#20652820

  • TS1424 When I purchase an album on itunes alot of the songs havnt downloaded fully and there isnt an error message either. So how do I get my complete purchase??

    Could some pls help me with this?? I have windows 7 with Mobile Broadband internet. Alot of the recordings/albums are incomplete after down loading them. Any assistance would be appreciated. Thanx

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • HP Mini 311 - HP Battery Alert - Primary (Internal) Battery (601) - Error Message at Startup

    I have a HP Mini 311-1037NR (Product Number is VBM262UA#ABA).   My OS is Windows 7 Home Premium.
    When I start up my HP Mini 311 I receive the following message:
    HP Battery Alert
    The system has detected the storage capacity of the battery stated below to be very low.  For optimal performance, this battery may need to be replaced.
    Primary (Internal) Battery (601)
    ENTER - Continue Startup
    Here's are my questions:
    First of all, what exactly is the problem here?  From what I have googled, it would appear the problem is NOT my external battery, but my internal battery.  What battery is needing replacement?  Does it have a name?
    Second, is there a user guide out there that would assist me with the replacement process that someone can provide a link to or at least send me the page that helps me?  Is there a YouTube video (even better)?
    Third, what exactly is the part number of the battery that needs replacement and exactly where do I purchase it (How much $$ does it cost)?  This question is important as I may be able to find out how to replace the battery, but without a way to purchase the replacement battery I'm still dead in the water.
    Fourth, my HP Mini 311 just dies when I unplug it.  Will a remedy for the above issue remedy this issue as well?  I really do enjoy using my little HP Mini, but would prefer to have the option to use it without a power cord. 
    Thanks in advance for any and all help.
    Tim
    This question was solved.
    View Solution.

    Hi Tim,
    No problem and it's certainly wise to verify an answer.
    I'd say you posted your question on the correct board.  It's usually best just to post once on the relevant board.  I do agree that the term 'internal' does cause unnecessary confusion.
    Here's a link to your Maintenance & Service Guide.
    Yes, I'm certain that the 601 error code refers to your notebooks main battery ( 602 is a failure code for machines that have a secondary storage cell ).  Interestingly, there is no error code generated for a failing rtc battery - or any in built diagnostic test for it, just the usual symptom of the system clock re-setting after each shutdown.
    There's also a HP document regarding start-up battery alerts on the following link.
    http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443470#N534
    Best regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Primary (internal battery) 601 very low how to correct this

    Primary (internal battery) 601 very low how to correct this my model no is HP pavilion g4 its g series

    Hi,
    Pleae try the following test. If failed you have to replace the battery (the main, big battery which powers the laptop):
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00821536
    Regards. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion dv7 . Primary (internal) Battery (601) charge is low .

                    HP Pavilion dv7 . On start-up , message says that Primary (internal) Battery (601) charge is low and needs replacing .
                   The PC operates normally on mains supply , so do I really need to replace the battery , being that I always use the PC powered by mains supply .
                    If I really must replace the battery , where can I purchase the replacement from , and how much will the replacement cost ?
                     Many thanks ,
                        TC48
    This question was solved.
    View Solution.

    Hi,
    Just to clarify, the 601 error relates to your notebooks main battery ( not the rtc cell on the system board ).
    If you're happy with running the machine on mains power full time, there's no issue with that and you can simply remove the battery.
    If you do want to replace the battery at some time, you can order a new one through HP Parts Store or ( and often less expensive ), just google the full Model No. of your dv7 series notebook including the term battery.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • REPLACING THE PRIMARY INTERNAL BATTERY 601

    MY PAVILION dv6-2150ev tells me i must replace the primary internal battery 601.
    i do no know which is this battery and how to change it

    Hi,
    This is a VERY misleading message. It's actually the main battery. Before buying a new battery, please try the following test:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00821536
    Hope the test and calibrate help otherwise you have to buy new battery. You can buy from HP or from:
        http://www.top-laptop-battery.com.au/6cell-hp-pavilion-dv62150ev-battery-108v-5200mah-p-9983.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Internal battery 601

    internal battery 601 needs replaced.

    Hi,
    The error message 'Primary (internal) Battery (601)' actually refers to the notebooks main battery, not the RTC (cmos) cell.
    A full list of battery error codes can be found in the document on the following link.
    Battery Error Codes.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

    When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to? 

    It's not necessary to change the Command N keystroke..
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:   Remove All Website Data
    Then delete the cache.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that didn't help, troubleshoot Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • My iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error-51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

    I was in the middle of the iOS 8 update and tried to turn my phone off (yes, I realize this was dumb) But what happened was it tried to reset. Now,  my iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error -51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

    Try a Hard Reset.....
    Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds.  Ignore the swipe to turn off message.

  • ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?

    iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?
    Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

    Thanks for the suggestion kcell. I've tried both versions
    9.0.115 and 9.0.124 and both fail with the policy permission error.
    I also tried with and without your crossdomain.xml file but
    with the same result. It looks like this file is intended for URL
    policy, instead of socket policy. Recently Adobe separated the two.
    When I run with the files installed on my dev PC, it does
    work, which makes sense because the flash player isn't loaded from
    an unknown domain.
    I did get one step closer. If a crossdomain.xml in the server
    root exists and the socketpolicy file is loaded from the app folder
    then the first two warnings disappear. The logs now show:
    OK: Root-level SWF loaded:
    https://192.168.2.5/trunk/myapp.swf
    OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
    OK: Policy file accepted:
    https://192.168.2.5/trunk/socketpolicy.xml
    Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
    seconds) while waiting for socket policy file. This should not
    cause any problems, but see
    http://www.adobe.com/go/strict_policy_files
    for an explanation.
    Warning: [strict] Ignoring policy file with incorrect syntax:
    xmlsocket://192.168.2.5:993
    Error: Request for resource at xmlsocket://192.168.2.5:993 by
    requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
    lack of policy file permissions.
    Which basically says, everything is okay, but you stay out
    anyway.
    PS: I found the XML schema files here:
    http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
    and the socket policy schema:
    http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
    UPDATE: When serving up the policy file on port 843 using the
    example perl script then the socket connection seems to be accepted
    and the connect succeeds. After that flex hangs trying to logon to
    the IMAP server.

  • My ipad will not come on.  i tried to restore and get error message 1603, dont know how to take out itsw

    my ipad will not come on.  i tried to restore and get error message 1603, dont know how to take out itsw which it tells me to do.

    Error 1603
    Follow the steps listed below for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW  in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    The above is from the 2nd link below.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Error Message in selection screen Status bar is getting truncated

    Hi Guys,
    Error Message in selection screen Staus bar is getting truncated (full message is not getting displayed).... can anybody tell me how to reslove this

    Hi
    Maimum we can give the error message length is 50 char. If you give more than that it will get truncated.
    What you can do this split 50 and 50 like that you can give 200 chnars.
    Data : Text1 type char50
              Text2 type char50
    If sy-surc ne 0.
    Message Text1 Text2  TYPE "E'' or 'S'
    endif.

  • Hi. I have purchased Lego Indiana Jones for my Macbook Pro. On trying to install it, it is telling me it encountering an error. Does anyone know how I can get around this? Cheers

    Hi. I have purchased Lego Indiana Jones for my Macbook Pro. On trying to install it, it is telling me it encountering an error. Does anyone know how I can get around this? Cheers

    I have this problem too the error message for me is error 36
    (It works on my Macbook but not my Macbook pro)
    Any help you could give would be great

  • Perameter incorrect error message comes up when I try to get photo

    I was using the 3.2 free edition version. It was working WONDERFUL! It is the best program for me. But today, when I went to load my pictures I got this error message "the parameter is incorrect". To get photos I was using a sandisk card reader. I usually just plug the card into the reader and the adobe photoshop album starter 3.2 usually pops up on its own, then I just click get photos. It sooo easy. But today that didn't happen. So I manually opened the program, then went to file, get photo, from reader, and then I see the number of pictures read, but then the error message comes up.
    Anyone know what that message means and how do I fix it?
    Thanks in advance for any help.

    Hi Penny,
    Reinstalling the program should not be a problem as this is available online for free download. Just search for "Download Photoshop Album Starter Edition" and you will be lead to appropriate link on the  Adobe site.
    Cheers!!

Maybe you are looking for

  • Down payment error

    Hi, While creating sales order, we have to receive down payment 30% of total order value. W e have to restrict the sales orders at that level only. Please tell me the configuration steps to block the sales orders, if the down payment is not received.

  • Ipad screen is dark, it lights up but dark

    I knocked my ipad 2 off my bed this morning.  It landed on its back, didn't harm screen. However,  if you turn it on,  the screen is black, but lights up. I can't get to anything else. How do I fix this, or who do I contact to have this fixed?

  • Design issue - Use (sub)sites or pages

    My client  has a complex organisation. A lot of departments. The startpage of the site has to be a portal where a few people can upload documents. After checking thes documents (by 3 powerusers) the documents must be copied to the department sites. T

  • 2 Airport Extermes, WDS, Macbook Pro and apple tv.

    So i have 1 extreme connected to the cable modem. It is setup as the main, a second is setup as remote and there is also a PS3 plugged into it. I just upgraded my macbook pro to the N wireless card. The network is 802n (b/g) compatible. There are no

  • Internationalization in webdynpro java

    Plz explain me Internationalization concept in webdynpro java applications//////////////////