Error message : No order corresponds to selection criteria

Hi,
I am using T code CN24N for scheduling networks for a project and entering Project as the input.
But I am getting the error:
No order corresponds to selection criteria
networks are there for the selected Project.
Can anyone tell me the possible reason for this?
Regards,
B P Singh

Hi,
Specify the Project & Network for the project in selection creteria & select the option as only selected network & excute the transaction.
Regards,
Raj

Similar Messages

Error message disble the Fields in Selection Screen

Hi,
In my Report i am validating some fields as mandatory.
If the field is initial then one Error message should be display in the screen and user has to modify the selection screen.
But after displaying the errro message my selection screen is input disable except the mandatory field.
I want all the fields should be input enable.
Sample code for Error message,
MESSAGE E018 WITH 'Enter Plant'.
Please provide the code for this.

Performing checks on SELECTION-SCREEN
- if the check uses only one independent field (e.g.: value exist in a table) use a[ AT SELECTION-SCREEN ON <field>|http://help.sap.com/abapdocu/en/ABAPAT_SELECTION-SCREEN_EVENTS.htm#!ABAP_ALTERNATIVE_2@2@], the field will be editable when error is raised
- if the check uses some fields, group them using [SELECTION-SCREEN BEGIN OF BLOCK <block>/END OF BLOCK <block>|http://help.sap.com/abapdocu/en/ABAPSELECTION-SCREEN_BLOCK.htm] and then [AT SELECTION-SCREEN ON BLOCK <block>|http://help.sap.com/abapdocu/en/ABAPAT_SELECTION-SCREEN_EVENTS.htm#!ABAP_ALTERNATIVE_4@4@], each field of the block will be editable when error is raised
So, if you really want that each and every field be editable when an error is raised, declare every parameter and select-options in a big block, and perform the check in a unique AT SELECTION-SCREEN ON BLOCK xxx.
Use Error message, Warning and Information don't break the flow of the report.
Regards,
Raymond

Error messages when trying to make selection

Hi, I am new at Photoshop, I use CS6, and today I followed a tutorial on how to make a robot on a picture and at first everything went ok but when I was almost done and tried to make a selection with the lasso tool I all of a sudden got an error message that says "Warning: No pixels are more than 50% selected. The selection edges will not be visible." And when I press OK my selection is not there. I had no problem when I started the project but now it won't work.
And now I get this error messages everytime I try to make a selection and it doesn't matter if I use the pen, marque or whatever.
Anyone here who knows what I'm doing wrong?
Best regards

Basically, what that warning message is telling you is that the "marching ants," will not be fully representative of your Selection.
Now, if you want to make a Selection, that includes 100% of the pixels, check the Lasso Options, to make sure that you do not have something like a large Feather, with a small Selection.
Good luck,
Hunt

Error Message during order confirmation.

Hi PP Gurus,
In the mapping of MTO process scenario and it's simulation I am using 2 BoM components as the NON-VALUATED (MATERIAL TYPE) for this I have made only 'Quantity Update' indicator ON in IMG settings.
After MRP run and at the time of Production order creation while doing 'Costing' system generating error message "OBJECT WAS NOT COSTED". Why is this error system generating?
Please help. As an appreciation I will reward points.
Thanks & regards,
Abu Arbab

Hi YM,
Sorry for the mistake in last post.
I am using strategy 20 and using ROH material type for all BoM items. Now please reply for it.
Thanks & regards,
Abu Arbab

Unexpected error message when ordering book

During the last few days I've been getting an " Unexpected error occurred, try again later." Anyone else experiencing this? I've done many books in the past with iPhoto, but this is the first time I get an error message.

Hi Toad,
Thanks. After reading Mike's post to you yesterday I thought I'd try setting up anew account and it worked. Unfortunately it was after the deadline so I don't expect to get it in time for Christmas. But because of the many hours spent on the project ( hardcover book 84 pages ) I decided to go ahead with it anyway. But next time...
Thanks again...
Wishing you and yours
The Best of The Holidays
Guy

Forecasting Error messages : CBP with auto model selection

Hi
I need to understand forecasting errors. Im working on consumption based planning with MRP type 'V2', when i execute the forecast i get error messages as"timeseries characteristics changed", "parameter optimization accesssed", "expost forecast carried out" etc. I checked in the customization where the errors are assigned to error classes(class 1 to 8). Can someone tell me how to interpret these errors, if possible any documentation reg this errors would be useful. "[email protected]"
Regards
Sam
Message was edited by:
sam litecky

Hi
My requirement is to calculate reorder point and safety stock via past consumption, so thats why im using MRP type V2. Pls correct me if this mrp type is wrong for calculating safety stock and reorder point based on past consumption or to use any other mrp type. any documentation on forecast error messages would be really great with points assured."[email protected]"
Regards
Sam
Message was edited by:
sam litecky

Error Message When Ordering

I established an account and ordered pictures once from IPHOTO. Now, when attempted to order prints I'm forced into the account setup screens. All of my data is present and correct but as soon as I finish the screens I get the message - "an unexpected error has occuured, please try again later". The screens do not allow me to simply enter into my account information at the beginning - I'm only allowed to enter set up account.

aeland:
Welcome to the Apple Discussions. If your problem is only recent, i.e. in the last day or so, it's probably server issues on Apple's end. I ran into a similar account setup early this week when I would try to log into these discussions. You can report it to http://www.apple.com/feedback/iphoto.html.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Error when included Order in Insert Select

Dear oracle guru's
I am working with Oracle 10g both forms and database . in one of my forms i try to insert values in a table from other table
the code is
insert into sstab(paramnam) select CP.Parameter_Object.Parameter_Name
from Customer_Parameters cp
order by cp_display_order;
earlier there was no order but to enhance further i added the order by command to the existing Insert-Select. But this threw an error while compiling the module itself .
Encounterd the symbol ORDER when expecting one of the ,;...
Kindly guide me in this regardd
with warm regards
ssr

Hi,
All DDL operations will automatically commit all the pending transaction.
But in the care of FORMS_DDL, if you are running an insert or update statement, then the pending transactions won't commit. For that you have to pass a DDL statement through FORMS_DDL.
If I am wrong, then please correct me.
Regards,
Manu.
Edited by: Manu. on Jan 7, 2010 5:57 PM

Error message: "Unable to prepare the selected file for editing"

There is another similar post. I have imported a bunch of Nikon NEF raw files into Lightroom. I can work them without any problem, but when I right-click the image to edit it further in Photoshop CS3. I get this message: i "Lightroom was unable to prepare the selected file <filename.NEF> for editing. It will not be opened." Photoshop has no trouble opening these NEF files by itself, but Lightroom can't hand it them off. Anyone know why this is? Nothing I can find in the help file or elsewhere here. Stan

Sean, if they are off-line, would any of this Xmp stuff make any difference? Don't they need to be brought On-lie to edit? And where would the Xmp's go with them off-line?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
http://donricklin.blogspot.com/

Error message when ordered more items than it's available in stock.

Hi again,
I've noticed that on the Commerce Reference Store (CRS) if I order, let's say, 10 "branded belt black large" and there's only 5 available in stock my order goes through and the order's status is set to "Pending Merchant Action".
Instead of this, I'd like to BLOCK the Order and display a message to the user. Something like: "There's only 5 items available".
I was wondering what's the easiest way to customize this behaviour?
Thanks!

Insert a new pipeline processor in validatecheckout pipeline chain to do the inventory check.
Peace
Shaik

Error message - Production order

Hello,
I have a problem with Production Order. I have created a Planned Order. While I type a Planned Order number and Order Type, SAP shows an error:
"Text ... ID PLPO language not found". Is this a problem of language settings in material or something else?
I will appreciate Your help.
Best regards,
Luke

Hello Kiran,
It seems to be a long text issue on of the position in Operation Details (Change routing). Reading could not be carried out. Reena was right about that. I will try to correct that and let You know. I hope that's the issue.
Best regards,
Luke

Error message ME006 order locked after support package

we went to a new support package this weekend and shortly after we have errors about locked documents error ME006
it is programm RVV50R10C
VL10X
I tried to change the number of tries from 100 to 1000 but had no effect ?
does anybody know how to resolve this ???
kind regards
arthur

Hi
Check SAP Note : 869852
I think it UME is not correctly installed
After upgrading your system to a newer SP, you get one of the following
exceptions when executing the UME WD application:
o java.lang.NoSuchMethodError:
com.sap.security.core.wd.umeuifactory.wdp.I
ExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/St
ring;
Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/St
ring;Ljava/lang/String;)Z at
com.sap.security.core.wd.maintaingroup.MaintainGroupComp.afterModel
Init(MaintainGroupComp.java:787)
In order to avoid this error, perform following steps:
- Open the SDM tool and undeploy all components starting with
"tc/sec/ume/wd/..."
- Go to your downloaded SP archives and find the UMEADMIN*.SDA.
Redeploy it.
Regards
Krishna.

ERROR message (iDVD) 'no video tracks selected' where is 'SHARED'

(I think everyone's asleep on the iDVD boards, so I've taken the liberties of posting here also, sorry.... ssshhhhhhh....)
My first time using iDVD (it's 5.0) --
Exported sequence from fcp as QT.....
Dropped into into 'drop zone' hit 'burn', and get "no video track defined"
I searched this forum (iDVD) and it seems I need to tweek "shared" setting.... since I made the sequence in fcp (not iMovie), where is this 'shared' menu?
Very perplexing...
Thanks.
Mark

Here'w what Ken says from his article detailing iDVD:
Once you have set all your markers, set an in and out point on your Timeline, File Menu > Export. From FCP 4.5 and FCE 2, select QuickTime Movie (not 'Using QuickTime Conversion').
There is an option in the Save box, "Make Self contained". If you uncheck this box the movie that is generated will consist of pointers to your media. The export process will happen quickly and the resulting file will be small in size. This is a good choice if you will be using iDVD on the same Mac as your editing application. If you chose to "Make Self contained" the resulting movie will contain all of the media, it will take longer to export and the file size can be quite large, (about 22 gigs for a 100 minute movie). If you will be moving to a different Mac to work on iDVD then you'll need to have your movie be self contained. In either case, leave 'Recompress All Frames' unchecked.

No unit found for selected resource ( error message /SAPAPO/SDP318 )

Hello
I am loading resource using standard SNP Planning book. When I try to load the resource, I am getting this error message "No unit found for selected resource". Can someone tell me where in the resource I set the UOM that corresponds to Planning book UOM.
Thanks for the hlep.
Najam

Hi,
Please check the type of the resource. This should be a single Mixed or Multi Mixed resource to maintain the SNP capacity.
And also run cons check / live cache check
Thanks,
Venkat

Error Message for new production order type

I have created a new production order type and gone through all the configuration requirements that I'm aware of. In testing this new order type, I get an error message in transacion CO02 when selecting the printer icon. The error is as follows:
No reference document type defined for order type ZRWK
Message no. CO179
ZRWK being the new order type.
I've searched through many posts and found nothing relating to this message. Hopefully someone has encounted this before.
I'm sure I've missed something, but can't pinpoint what it is.
Help is greatly appreciated.

Bob, did you check your print parameters?..Maybe you don't have your sap forms..You can check it with Tx. COPI
The path is Print - Print Settings - Configuration Menu.
Diego

Error message : No order corresponds to selection criteria

Similar Messages

Maybe you are looking for