Error Message: Object could not be activated

Hello experts,
Once I try to activate a DSO the system shows the following message:
Object ZZABCDE could not be activated;
The errors  are:
-The creation of the export data source failed (RSBM035),
whilst generating the export Infosource, the metadata for a datasourcemust be generated. An error arose when doing this.
-ERROR CALL_FUNCTION_SECSTORE_ERROR occur ed. P1=PB9CLNT100 P2=PB9CLNT100 P3=/RFC/
The system I am using was copied from an other system, could such errors be due to missing elements in the configuration of the system?
thank you in advance

Hi,
I assume that this is due to the system Copy.
Since there is always an export DataSOurce generetad to ODS or DSO, the myself-System needs to be setup properly.
Check if the Sourcesystem connection to the MYSELF-System (your BI) is maintained properly after system-copy.
If not, contact your admin.
If your'e not working with sap-all/sap-new, you should also check authorisation.
hth
Sven

Similar Messages

  • Error Message : Object could not be scheduled within the specified time interval

    Post Author: mohamed elkashef
    CA Forum: Publishing
    Dear All when i try to run event for daily reports it sometimes take generation status failed with this error  message : Object could not be scheduled within the specified time interval so  i need to know the reason of failure and how can i fix  this error  thanks a lot 

    Post Author: nvnaresh
    CA Forum: Publishing
    Dear jsanzone,
    I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
    We are using BO XIR2+SP2.
    I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
    We have 3 such reports to be scheduled on the same event.
    Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
    This usually should work fine.
    But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
    Do I need to increase any server parameters?
    Why is this happening randomly?  

  • Error Message saying could not reach activation server. Please Help.

    Hello Everybody. I have an Ipad Mini And when I go to update ios 7 I have to reset my settings. I ruined my ipad by doing this and now I am seing something saying that ipad could not be activated because it couldn't reach the activation server. Please somebody help save my poor little Ipad .  Can anybody help me save my little ipad as I don't know much about computers or tablets. Without an Ipad I don't know what to do? Does anybody have the same problem? Or am I the only one has this problem. Thanks From Nathan Knox.

    If you'll check other threads you'll see that a lot of us having update/activation problems.
    This is mostly a matter of waiting (and trying) to get connected to an Apple server.
    Patience!

  • When trying to connect to the itunes store on my MacBook Pro, I get the following error message: "iTunes could not connect to the iTunes Store.  An unknown error occurred (-54) Make sure your network connection is active and try again."

    When trying to connect to the itunes store on my MacBook Pro, I get the following error message: "iTunes could not connect to the iTunes Store.  An unknown error occurred (-54) Make sure your network connection is active and try again."

    I've had the same problem for a month and yet I still cant get iTunes to work, I've heard different solutions but none have worked for me
    This may or may not work for you but its worth a try even though it didnt seem to work for me, Good Luck!
    Control Panel
    Internet Options
    Connections Tab
    Click LAN Settings
    Uncheck "Use A Proxy Server"

  • Received following error message "itunes could not connect  to the itunes store. make sure  your network is connection is active  and try again." i know the connection is active. what can i do to resolve?

    received following error message "itunes could not connect with Itune store - make sure  your network connection is active and try again" i know my connection is active. does anyone know how to fix this problem?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    Now launch your iTunes and see if it is working now.

  • Iphone 3gs shows activation required, hocked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

    iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

    Instructions to get the phone back working temporary.. till there is a real fix.
    1. turn off the phone
    2. fire up iTunes
    3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
    4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
    5. iTunes will then ask you to choose which previous backup to would like to recover.
    (note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1)

  • ITunes error message / "iTunes could not connect to the music store...

    The past week, I have been having problems connecting to the iTunes music store. I purchased my ipod in 10/05 and have had no problems until recently. I keep receiving the following error message:
    "iTunes could not connect to the music store. Network connection was refused. Make sure your network settings are correct & network connection is active, then try again."
    I went onto the website, and checked various things. I uninstalled and reinstalled iTunes and the software, checked to see if I have any firewalls (none), checked to see if I have Windows XP service pack 2 (I have 1), and contacted my ISP (AOL). Help! I have AOL 8.0 dial up, and have had service with them for a couple of years now, so that is not an issue. Per AOL, I tried uninstalling AOL adapter and restarting my computer, and also deleting cookies and deleting files/all offline content, defaulted my security settings (they were the same), and reset web settings. I have restarted my computer, but am still having the same issues. I already contacted iTunes about this issue, and they sent me the same email twice, with the same instructions as their website, which I indicated I already tried numerous times. I have also checked my connections, and everything is fune. I try to access iTunes after logging into AOL.
    Thank you in advance to everybody that responds.
    Emily

    Thanks for the input. Unfortunately, I keep trying to do that, and have not been able to download for about a week. After contact customer support, I received the general "technical support" email, which is the same information found on the website. After replying to the email, which stated that I tried already tried the methods listed, I received the same email again. After replying to that email which included the previous threads, I received an email stating that the deparment I replied to does not handle technical issues. So, tonight, I re-emailed them with all of the threads and asked for an explanation of why I received technical emails if they do not respond to technical emails. It will be interesting to see how they respond, although it will probably be some general email. I sometimes respond to member service emails at my place of employment, so I know the procedure. The bottom line is that I should receive answers to my questions, even if the answer is something along these lines:
    "I am researching your problem, and will contact you within the next xx hours/business days with a resolution. We value you as a customer, and strive to maintain excellent customer support and satisfaction. Thank you for your patience."
    Or, a similar response. I know there is a general response library. And, I also know that if some body is unable to answer a question, as customer support, they should try utilize their resources. Basically, be a problem solver.

  • Error message: itunes could not connect to the itunes store

    Hi All,
    I'm a rookie to the whol Apple ipod nano, etc, etc. I bought the generation 3 nano yesterday. I successfully downloaded a CD to the nano, but when i tried to download a tv show and open itunes i get the follow error message:
    "itunes could not connect to the itunes store. Make sure your network connection is active and try again."
    The funny thing is, is that i'm not even on a network. I'm just doing this from home and not connected to a network. internet connection works, I ran the diagnostic and nothing weird came up? Any suggestion for a newbee.

    Hi, I am having the same problem and I get the message: "iTUNES could not connect to the iTUNES store. Make sure your network connection is active and try again." I just downloaded 2 songs no problem, after uploading the latest version on iTUNES online. I closed the program and tried again, same message. My cable internet connection works just fine, so I am assuming the problem is on their end. I will check in with you guys to see if someone figured it out.
    Thanks
    WP

  • 2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??

    2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??

    Hi Peter,
    Thank you for the note - I have seen similar replies on other posting errors and I see how that could make sense. The thing is, my iPhone is not jailbroken - it is from an authorized distributor. However, when I told them about the "no service" problem on the sim, they were unable to assist. Then my phone messaged that an itunes restore was required - so I did that, several times, to the error message now noted on my post. I wonder if there is some other way to over-write this message? Thanks very much.

  • I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

    I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

    One thing that might help.
    1. open itunes preferences from the edit menu and click on the devices tab.
    2. check the box to disable syncing for iphones connected to itunes and click ok.
    3. Then click the button to reset sync history.
    4. Now click ok to close the preferences window.
    5. connect the iphone to itunes and go to the info tab.
    6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
    7. then click apply on the bottom right of itunes.
    This will overwrite any events on the iphone, including any events that has become corrupted.
    Hope this helps

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • I bought a Mac Book Pro retina display, Serial Number  C02J2****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. t

    I bought a Mac Book Pro retina display, Serial Number  C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
    Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
    Sincerely
    Asrat Kahsay
    N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
    <Edited by Host>

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    The OS X Mt Lion up-to-date program;
    http://www.apple.com/osx/uptodate/

  • How to get rid of the error message we could not complete your iTunes store request?

    How to get rid of the error message we could not complete your iTunes store request?
    having this problem when trying to authorise an newly downloaded app in iTunes

    Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
    Do not change your settings.
    Edit

  • When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils

    When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils
    Can someone help me with this issue please? Tks

    https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

Maybe you are looking for