Error message on 7310 All-in-One

Th error message reads "Tri-color print cartridge inserted is not intended for use in this printer "  however it i the same cartridge I have always used and had just printer several pages before this message???

Hey Chuck,
I guess you're using either an HP95 or HP97 cartridge right?
One of the most common causes of this would dirty contacts between your printer and cartridge. I'd take the cartridge out and clean the electrical contacts to see if that helps to begin with.
Regards,
Although I am an HP Employee I am not expert on all products.
The views I express here are my own and in no way represent the views, opinions or strategies of HP.
I'm just trying to help out if I can.

Similar Messages

  • False paper jam error message on Officejet All-in-Ones

    I've been helping a not-so-techie friend with his J6450 false paper jam errors.  He's now on his second one (got replacement from HP) and has same exact problem.  (We think the paper sensor is getting stuck and causing error message.)
    His problem is by no means unique.  I have looked at customer reviews for this printer on many vendors' websites, and have seen horrible reviews of HP's all-in-ones because of the false paper jam error message.  By the way, none of the suggestions here seem to fix the problem, so don't waste your time uninstalling and re-installing the software.  The problem is mechanical.
    With so many posts regarding false paper jam errors on these HP All-in-Ones, HP should replace these printers with a different model that does NOT have this problem, if such a model exists, at no charge, of course.  

    I have just spent the last 3 hours thinking I have been overlooking paper somewhere in my J6450 after consistently getting a paper jam error.  Of course my warranty has expired!  Just wondering if it would be worth fixing OR NOT?

  • Remove and check cartridge on right error message on 7410 all in one

    I recently changed the black ink cartridge in my 7410 all in one printer. After changing cartridge it gave me an error message of " Remove and check cartridge on right". I have tried removing and reinstalling , cleaning connection points with clean damp cloth (water) and still cannot get error message to go away.
    Any ideas would be greatly appreciated. Thank You.

    NoProblemAtoll wrote:
    I know this is an older thread but being it is a top Google result associated with the "Remove and check cartridge on right" error it justifies adding a helpful suggestion for other.  Our findings have been HP Printers are very biased against refilled \ recycled cartridges.  I own a total of (5)x HP 7310 and HP 7410 printers in my IT Consulting office.  These are feature rich MFP’s with an abundant supply of ink available at generously economical prices.  On the face of it, it sounds like a good reason to keep a bevy of last gen printers around. EXCEPT the printers work great with the $30-$50 brand new HP brand 96 cartridges from Office Depot or Staples.  Unfortunately if you try and buy some recycled cartridges off ebay the Printers detect the recycled\refilled cartridges as a previously depleted HP cartridge that may not be genuine and the units suddenly turn on you.  Miraculously the "Remove and check cartridge on right" only manifests itself with non-HP brand cartridges or cartridges that have been refilled.  (We have even tried to re-fill out own refreshly depleted cartridges with like results.)  Think of it as an HP service reminder conveying you forgot to pay HP their $30-$50 profit on your ink this go round.  Remember you need HP Branded ink cartridges (HP = Homogeneously Proprietary).  It’s like an intention flaw written into the firmware.  Best guess (purely on conjecture) is there is a check in the firmware/drivers for if the cartridges has been previously installed, previously depleted, max install count, and expiration date validation.  If it encounters a condition it doesn’t like you get this nondescript error.
    [advertisement snipped]
    The above post is filled with conjecture and speculation, but is not based on fact.  The Officejet7410 is not programmed to reject refilled/reman cartridges.  It will check cartridges electrically for various things and will reject cartridges that fail.  Typical failures would include a cracked printhead (caused by rough treatment - dropping the cartridge even a few inches for example), or open electrical connections caused by   debris on the cartridge contacts.  Cleaning the cartridge contacts as shown in the document here may resolve the issue in case of poor electrical contacts.
    A cartridge that has been previously used in a different printer will likely be marked as empty, but the printer will happily print with a cartridge detected as empty.
    The reality is that the quality of refill and reman cartridges are very variable, but generally poor.  The study here has a study conducted by a testing facility, here is another study. 
    My personal experience has been similar.  I donated an HP all-in-one to my son's high school years ago.  Sometime later I got a call from the teacher complaining that it was not printing properly.  I went and took a look and found they had put in a renam color cartridge that was not printing one of the colors*. They tried another cartridge, which also had a problem and then finally the third cartridge worked.  I asked why they used renam cartridges and he said they bought these because they were cheaper.  I asked if they were 1/3 the cost....
    *The color missing had nothing to do with the printer - blotting the bad cartridge on a damp tissue gave only two of the three colors that would normally be present.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Error Message when installing All In One Product

    I am having to re-install my HP Officejet 6500 e709a software.  I am getting the following error message when I try to install it.  Anyone have any suggestions on how I can correct this?
    Thanks,
    JN
    This question was solved.
    View Solution.

    Hi @MattNC79,
    Welcome back to the HP Support Forums! I understand you are trying to reinstall the software and drivers for your HP Officejet 6500 to your Computer running the  Windows 8.1 Operating system. When you attempt to install you get an error message with an error code. I would like you to click on the link below to get started:
    HP Printers - Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) ...
    Please let me know the outcome, I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Error Message on 7520 All In One Set up on MAC

    I have tried several times to install the drivers for the HP 7520 on my MAC (10.9.5 Mavericks).  Each time I get this error message;
    The system extension “/System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
    The printer will still print fine, but it will not capture images when scanning or copying.  Does anyone have suggestions for a fix?  

    Hi @angcavallaro 
    The path /System/Library/Extensions/AppleUSBEthernetHost.kext points to an issue with the operating system.
    Kext files are essentially drivers for Mac OS X. "Kext" stands for Kernel Extension; kext files "extend" Mac OS X's kernel, the core part of the operating system, by providing additional code to be loaded when your computer boots..... Technically, kexts aren't individual files. In fact, .kext "files" are essentially packaged like .zip files. - Source
    I suggest repairing your disk permissions using the following steps;
    On the Dock, click Applications, and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions button at the bottom of the window.
    Once the repair is complete, restart the computer and try scanning again.
    You may even need to uninstall and reinstall the HP Software. Let me know if you need help with this.
    What are permissions?
    Every file and folder on a Mac OS X hard drive has a set of permissions —settings that determine which user(s) have access to each item, and exactly what that access is. For example, permissions dictate whether or not a particular user can open and edit a particular file. But permissions also determine which items the operating system—or specific parts of it—can access and modify, and which files are accessible by applications.
    What does repairing permissions do?
    The Repair Disk Permissions function—the process that actually performs the task of repairing permissions—examines certain files and folders on your Mac’s hard drive to see if their current permissions settings are what Mac OS X expects them to be; if discrepancies are found, the offending permissions are changed to match the expected settings. - Source
    If repairing the disk permissions does not resolve the issue, you may need to delete the particular .Kext that is causing the error, I suspect doing an Apple update after would reinstall the missing .Kext, BUT, since I work on behalf of HP and not Apple, my area of expertise is not with the Apple operating systems in's and out's. I think, if repairing the disk permissions does not resolve the issue you should either reach out to the Apple Community or call Apple support.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Error Message on 1610 All-In-One

    Flashing message Error:0x8814ale1:BI(15;15*B8D
    Not sure if this code is correct. I've tried taking out cartridges, unplugging. There is a failure in the paper alignment and it just flashes this code.

    Hey Chuck,
    I guess you're using either an HP95 or HP97 cartridge right?
    One of the most common causes of this would dirty contacts between your printer and cartridge. I'd take the cartridge out and clean the electrical contacts to see if that helps to begin with.
    Regards,
    Although I am an HP Employee I am not expert on all products.
    The views I express here are my own and in no way represent the views, opinions or strategies of HP.
    I'm just trying to help out if I can.

  • Error message on C7280 all in one 0xc18a0201

    Hi
    Printer was working okay but after changing 2 ink cartridges, genuine HP products, I get the above message and can no longer print, copy or fax. Additional message is that the ink carriage has stalled. Following instructions to power down and back up again does not resolve the problem. Can anyone help please?
    Nigel

    Peter Thank you for the information. Unfortunately the suggested solutions failed. The identified problem is that the optics are faulty which I find strange for a machine less than two years old and rarely used as a printer. Indications are that it would be more expensive to repair than to replace. Anyone who can provide a supplier of spare parts for less than £150 I would be most welcome to hear from. Alternatively there is a C7280 going for scrap unless someone wants ift for spare parts. Nigel

  • What is an Error: 0x8477e630 and how do I fix it on an HP Officejet 7310 All in One?

    What is an Error: 0x8477e630 and how do I fix it on an HP Officejet 7310 All in One?

    I did a Google search on Error 1450, and it seems to be a 'lack of resources' issue within windows. Not related to iTunes.
    Maybe shut down all other programs (including the TSR programs you may have loaded) and see if it helps?

  • Hp officejet 7310 all in one scanning/faxing problems

    faxing and scanning will not work on my hp officejet 7310 all in one printer ... i have uninstalled and then re-installed, but still not working.... what am i doing wrong?

    I'm sorry..... I did find an ERROR message.
    When I clicked, it showed this:  there are 5 green check marks and I will indicate with an *
    * Device Manager
    * Driver Check
    * Device Status
    * Window (WIA) Scan
    * Solution Center
    * HP Twain Scan
    but then this:
    ! (a yellow exclamation mark) next to
    Registry
    HP Scan Flow Manager
    Digital Imaging Monitor
    Front Panel Test
    Test Scan
    Hope this helps you find my problem ......... thank you.

  • My HP 7310 All-in-One is indicating "Disconnec​ted", when it IS connected.

    Hello and Happy 2015 to All !  
    Just this morning, my HP 7310 All-in-One indicates: Disconnected, when it was working perfectly yesterday.  I've checked all of the cable connections and HP unit and my Laptop are both ON.  Any Suggestions ??
    Please Help ASAP, as this issue is stalling my business day...Yikes !!!
    Thank You Very Much, and God Bless !!
    Sincerely,
    Roger

    Hi @RsHP7310Suppt 
    I'd sure like to help you with your HP 7310. I understand you are getting a 'Disconnected' indication when trying to use the printer. Please complete the troubleshooting recommendations listed in the following document and let me know if doing so resolves the issue, thanks; 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows Vista.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Used to be able to print multiple page pdf files on my HP 7310 all in one and then it stopped and would only print the curent page. This is tedious for long PDF docs. I am on 10.6.8 .

    Used to be ablert to print multiple page pdf files on my HP 7310 all in one printer and now I can only print the current page and therefore it takes forever printing them one by one. I am in version 10.6.8. Tried printing as image using the advanced click and that did not work either.  I have Adobe 9.0 reader installed.

    I tried this earlier, and I tried it again today.  Both times it said "Software Missing!"  and "HP Software required to connect to your printer over the network could not be found on this computer."  But when I tried to install the software (AIO_CDB_Net_Full_Win_WW_130_141.exe, which I downloaded from HP's web site), it wouldn't install, as described above.  In the diagnostic utility, I clicked "skip", and it said "Connection Verified!", and "The printer is connected to the network and the services related to the network connections have been verified and reset to a normal operating state.  Everything appears to work fine at this point.  Please doa test print to verify that the issue is resolved or click Skip to move to the next step."  I clickedthe "Test Print" button, and immediately it popped up a box that said "Test Print Failed."
    I tried again to install the HP software, and it installed, detected the printer, and asked me to select it.  I selected the printer, clicked "next", and it did its network diagnostics.  Then it said "Problem(s) found with your network" and "Problem(s) may exist with the network functions of your printer . . ."  I continued the installation without connecting to the printer.  Then I ran your network printer diagnostic tool again, and got the same result - "HP Software required to connect to youir printer over the network could not be found on this computer."

  • I am unable to sync my iPhoto with my iPad and iPhone - error message (-50). All other syncs (mail iCal etc OK). Can anyone suggest a fix please ?

    I am unable to sync my iPhoto with my iPad and iPhone - error message (-50). All other syncs (mail iCal etc OK). Can anyone suggest a fix please ?

    As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
    Office for Mac forums

  • TS3694 I keep getting the error message "-42408" and all of my apps got deleted on my iPhone. It says that I need to authorize my computer, so I tried than and that's when the error message showed up. I'm pretty ****** and want my apps to be back on my iP

    I keep getting the error message "-42408" and all of my apps got deleted on my iPhone. It says that I need to authorize my computer, so I tried than and that's when the error message showed up. I'm pretty ****** and want my apps to be back on my iPhone. Please help.

    What version of iTunes are you using?  The error you references seems to be connected with iTunes 9.0.4.  That version of iTunes is not compatible with iOS 6. You need to update to the current version of iTunes.

  • Hp 7310 all in one

    found no related post for my question which I find hard to believe no one else has questioned; after installing AIO_CDB_Net_Full_Win_WW_130_141 (1).exe driver I have lost automatic duplex printing fro my hp 7310 all in one.
    Another problem there is no longer an option to print from black cartridge only.

    What operating system? See the post here for enabling the duplexer (and if you are using Vista see the second paragraph for a link to a patch...)
    For Windows 7 the option is in the color tab "Use Black Only"
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Clear the fax log on a 7310 all in one printer

    how 2 clear the fax log on a hp 7310 all in one printer

    gooddog1,
    I am more then happy to help you clear your fax log.
    1.) Setup button (Right above the up arrow)
    2.)Tools
    3.) Clear fax log
    I hope this helps
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for

  • Java deployment toolkit

    My Java (TM) Platform SE 6 U23 6.0230.5 is disabled because it's known to cause security problems. Should I also disable Java Deployment Toolkit 6.0.230.5? Both are listed in the plug in section. Also Java Quickstarter 1.o is disabled in the extensio

  • MIRO before goods receipt

    Hi, I create a PO without the tick in the field "GR-Based Invoice Verification" now when in MIRO I post an invoice with reference to a PO, system doesn't read quantity and amount from PO. Why ? Regards

  • Calculating worked hours

    Hey guys, I'm sorry if this has been asked a million times, but I can't seem to find the exact answer by searching. I want to use numbers '09 to calculate the hours I've worked, preferably each week. However, I'd like this list to continue over time,

  • Is there a simple tool to make .cab file to speed up applet downloading?

    I wrote a Swing applet. It can be displayed on IE correctly. However, download the applet takes quite a while. Is there a simple tool (instead of the whole pkg of Microsoft's SDK) which can be used to make a .cab file to speed up IE download? Thank y

  • Sansoray 2255 with labview

    I have LV 2011 and Vision 2011 and I am trying to use a Sensoray 2255 4-channel frame grabber with very little success.  I have the driver installed from their website, and have tried all the steps with the windows driver and DirectShow driver.  The