Error message PLEASE ENTER BUSINESS AREA

Hi experts,
Facing problem while doing 531 movement for by product generation by MB1A.
Getting error message PLEASE ENTER BUSINESS AREA.
and for same material accounting document not heat.
experts suggestion need to resolve issue.
Waiting
Bhupendra

Business area is Pulled based on Division assignment
Assign the division for that material in basic data view
and then post

Similar Messages

Error message F5901-Enter Business Place Value

Hello Friends and experts,
I am trying to enter a cross company code vendor invoice posting (vendor line in one company and all the expense lines in multiple co.cds). When I try to post the entry I am getting error message F5901 - Enter Business Place Value.
The error is coming after we have upgraded to ECC 6.0 EHP5 from ECC 5.0 SP13.
I have checked the customizing. We have not activated Business Place functionality for any country in our system.
I did not even find any SAP note in this regards.
Does someone has any clue on what may be wrong and how to fix it?
Regards,
Vishal.

Hi Tanmay,
You might have created a validation rule for Business place in order to track the TDS as per Business place. Please check it in GGB0 and OB28 and input the Business place at transaction level if needed.
Thanks

SAP CATM time transfers error message "please enter consecutive dates"

we have just implememted CATM as part of our contractor time entry process. we are currently running the CATM job weekly, however we keep recieveing the following error message on various contractors time entry transfers
"please enter consecutive dates 1 2 3 4&5&6&7&8"
this appears to be due to the fact the contractors may not work consecutive days with the weekly parameter that the CATM job was ran for.
ie the job is ran on the friday for the current week
perhaps the employee didnt work on the wednesday and as such had 0hrs on that day.
in order to process that CATM transfer we have to run it for the first 2 days of the week and then the last 2 days.
is there a solution around this that i cant seem to find. it seems absurd that i need to run it mannually for every single day everytime that i run it.
CATM should accept the date range and just process any time transfer within that range.
has anyone else encountered this error and if so how did you process it?

there is no message number, CATM is a horribly lacking transaction to use. i cant get any additional information from the F1 transaction. unfortunatly MM & HR are not my strong suits.

When creating iTunes account, my mom provided her credit card information and the system does not accept pre populated province and gives the error message ("please enter at most 3 letters or numbers for province") how does she get past this?

Why is my mom getting the error message for province when trying to create iTunes account when providing her credit card information?

Hi Nahal,
I'm just wondering, is it possible that your Mom (originally) got her credit card in a different province?
I don't know much, but of this I am certain: Apple would absolutely, positively, love to help you create an iTunes account!
Otherwise, you can start here > http://support.apple.com/kb/HE57
Best Regards,
mm~

Facebook: Clicking on search results that appear as I type redirects to a page with the error message: "Please enter a query"

If I use IE Tab Plus to switch rendering engines to IE the search box works just fine.

Nevermind...just had to do a full reinstall. That means going to firefox folder on my computer, running helper.exe from the uninstall folder, and unchecking the box that lets you save your themes, addons, bookmarks, etc. The reinstalled version works perfectly. Now I just have to find all those addons again...

Z1-015 Error "Enter Business Area" in BAPI_INCOMINGINVOICE_CREATE

Hi All, 
Here is a scenario that has totally confused me and I don't know what to do. Any guidance in this area will be highly appreciated. 
I am using BAPI BAPI_INCOMINGINVOICE_CREATE for MIRO. Our client gets invoices that contains both PO lines and some Non PO lines. For the PO lines I am populating the BAPI_INCINV_CREATE_ITEMDATA table and for the non po lines I am populating the BAPI_INCINV_CREATE_GL_ACCOUNTDATA table. In the structure BAPI_INCINV_CREATE_GL_ACCOUNT I am also populating the Bus_Area field with the Business Area value along with other values. The header Bus_Area is also populated with business area code. 
However, when I try to post the invoice the bapi return me a message: Z1 015 "Enter Business Area" and the invoice does not get booked in SAP, 
I have tried searching this forum and also googled about it, but I got no help in this regard. Please help me out in understanding this problem. I am attaching the code below for ease of understanding my problem. I am using SAP .Net Connector for the purpose. However, any guide related to this error (may not be .Net specific) will be appreciated. 
//objects used for creating the invoice **** 
BAPI_INCINV_CREATE_ADDRESSDATA Addressdata = new BAPI_INCINV_CREATE_ADDRESSDATA(); 
BAPI_INCINV_CREATE_HEADER Headerdata = new BAPI_INCINV_CREATE_HEADER(); 
BAPI_INCINV_CREATE_ACCOUNTTable Accountingdata = new BAPI_INCINV_CREATE_ACCOUNTTable(); 
BAPI_INCINV_CREATE_ACCOUNT Account = new BAPI_INCINV_CREATE_ACCOUNT(); 
BAPI_INCINV_CREATE_ITEMTable Itemdata = new BAPI_INCINV_CREATE_ITEMTable(); 
BAPI_INCINV_CREATE_GL_ACCOUNTTable Glaccountdata = new BAPI_INCINV_CREATE_GL_ACCOUNTTable(); 
BAPI_INCINV_CREATE_GL_ACCOUNT Glaccount = new BAPI_INCINV_CREATE_GL_ACCOUNT(); 
BAPI_INCINV_CREATE_MATERIALTable Materialdata = new BAPI_INCINV_CREATE_MATERIALTable(); 
BAPIRET2Table InvReturn = new BAPIRET2Table(); 
BAPI_INCINV_CREATE_TAXTable Taxdata = new BAPI_INCINV_CREATE_TAXTable(); 
BAPI_INCINV_CREATE_VENDORSPLITTable Vendoritemsplitdata = new BAPI_INCINV_CREATE_VENDORSPLITTable(); 
BAPI_INCINV_CREATE_WITHTAXTable Withtaxdata = new BAPI_INCINV_CREATE_WITHTAXTable(); 
// **** 
// populating the header 
Headerdata.Bus_Area = invoice.BusinessArea; 
Headerdata.Comp_Code = invoice.CompanyCode; 
Headerdata.Doc_Date = invoice.InvoiceDate; 
Headerdata.Doc_Type = "RE"; 
Headerdata.Diff_Inv = invoice.VendorID; 
Headerdata.Currency = invoice.Currency; 
Headerdata.Exch_Rate = 1.00M; // to be replaced 
Headerdata.Gross_Amount = invoice.InvoiceAmount; 
Headerdata.Header_Txt = ""; 
Headerdata.Invoice_Ind = "X"; // X = Invoice , '' = Credit Memo 
Headerdata.Inv_Rec_Date = invoice.DateReceived; 
Headerdata.Pmnttrms = invoice.PaymentTerm; 
if (invoice.IsMatched == "0") 
 Headerdata.Pmnt_Block = "A"; // in case the IsMatch Status = 0 
Headerdata.Pstng_Date = invoice.PostingDate; 
Headerdata.Calc_Tax_Ind = "X"; 
Headerdata.Del_Costs = 0.00M; 
Headerdata.Ref_Doc_No = invoice.InvoiceNumber; 
Headerdata.Inv_Year = "0000"; 
// populating the line 
List<Invoice.LineItem> lines = invoice.LineItems.Where(item => item.PONumber.Trim() != String.Empty).ToList(); 
int itemCount = 0, accSlNo = 0; 
foreach (Invoice.LineItem line in lines) 
{ 
 itemCount++; 
 string strItemNo = FillCharacter(itemCount.ToString(), "0", 6); 
 BAPI_INCINV_CREATE_ITEM Item = new BAPI_INCINV_CREATE_ITEM(); 
 Item.Invoice_Doc_Item = strItemNo; 
 Item.Po_Number = line.PONumber; 
 Item.Item_Amount = line.Amount; 
 Item.Quantity = line.Quantity; 
 Item.Po_Item = FillCharacter(line.PO_LineNo, "0", 5); 
 Item.Po_Unit = line.PO_Unit; 
 Item.Po_Unit_Iso = line.PO_Unit_Iso; 
 Item.Tax_Code = line.TaxCode; 
 Item.Cond_St_No = "000"; 
 Item.Cond_Count = "00"; 
 Item.Ref_Doc_It = "0000"; 
 Item.Ref_Doc_Year = "0000"; 
 Item.Po_Pr_Qnt = Convert.ToDecimal(Po_item["Quantity"]); 
 Item.Po_Pr_Uom = Po_item["Orderpr_Un"].ToString(); 
 Item.Po_Pr_Uom_Iso = Po_item["Orderpr_Un_Iso"].ToString(); 
 Itemdata.Add(Item); 
} 
// populating the GL Accounts for the non PO and PM lines where the PO number will be blank 
List<Invoice.LineItem> nonPOlines = invoice.LineItems.Where(item => item.PONumber.Trim() == String.Empty && item.LineItemType == "L").ToList(); 
itemCount = 0; 
foreach (Invoice.LineItem line in nonPOlines) 
{ 
 int multiplier = 1; 
 itemCount++; 
 Glaccount = new BAPI_INCINV_CREATE_GL_ACCOUNT(); 
 Glaccount.Invoice_Doc_Item = FillCharacter(itemCount.ToString(), "0", 6); 
 Glaccount.Db_Cr_Ind = "S"; // debit 
 Glaccount.Neg_Postng = ""; 
 if (line.Amount < 0.00M) 
 { 
 Glaccount.Neg_Postng = "X"; 
 Glaccount.Db_Cr_Ind = "H"; // credit 
 multiplier = multiplier * -1; 
 } 
 Glaccount.Comp_Code = invoice.CompanyCode; 
 Glaccount.Item_Text = line.Description; 
 Glaccount.Item_Amount = line.Amount * multiplier; 
 Glaccount.Gl_Account = line.GLCode; 
 Glaccount.Costcenter = line.CC; 
 Glaccount.Profit_Ctr = line.PC; 
 Glaccount.Orderid = line.OrderNo; 
 Glaccount.Tax_Code = line.TaxCode; 
 Glaccount.Bus_Area = line.BA; 
 Glaccount.Person_No = "00000000"; 
 Glaccount.Sdoc_Item = "000000"; 
 Glaccount.Ref_Date = "00000000"; 
 Glaccount.Wbs_Elem = "00000000"; 
 Glaccount.Profit_Segm_No = "0000000000"; 
 Glaccount.Alloc_Nmbr = line.Assignment; 
 Glaccount.Tr_Part_Ba = line.BA; 
 Glaccount.Activity = ""; 
 Glaccount.Acttype = ""; 
 Glaccount.Cmmt_Item = ""; 
 Glaccount.Cmmt_Item_Long = ""; 
 Glaccount.Co_Busproc = ""; 
 Glaccount.Costobject = ""; 
 Glaccount.Func_Area = ""; 
 Glaccount.Func_Area_Long = ""; 
 Glaccount.Fund = ""; 
 Glaccount.Funds_Ctr = ""; 
 Glaccount.Network = ""; 
 Glaccount.Rl_Est_Key = ""; 
 Glaccount.Sd_Doc = ""; 
 Glaccount.Grant_Nbr = ""; 
 Glaccountdata.Add(Glaccount); 
} 
proxyPOInvoice.Bapi_Incominginvoice_Create(Addressdata, Headerdata, out FiscalYear, out InvoiceNumber, 
 ref Accountingdata, ref Glaccountdata, ref Itemdata, ref Materialdata, ref InvReturn, ref Taxdata, ref Vendoritemsplitdata, ref Withtaxdata); 

Hi,
This error was mis leading. If CalculateTax flag is set to 'X' and there is balance in the transaction currency then, instead of giving "Balance in transaction currency" error "Enter Business Area" error comes.
There must be some logic for SAP to give this error, but it was somewhat misleading. When i removed the flag for CalculateTax="", this error vanished and "Balance in transaction currency" error came. When I retrified that my invoice got booked properly.
Thanks to all anyway for the responses provided.
Best Regards
Sutirtha

Cannot open Photoshop Elements. Receive error message 400 (Photoshop services are currently unavailable. Please try again later (I have) or check your network connections (they are OK). Error 400.

Cannot open Photoshop Elements. Receive error message 400 (Photoshop services are currently unavailable. Please try again later (I have) or check your network connections (they are OK). Error 400.

Photoshop.com is no longer available. The service transferred to Revel.
Ignore the sign-in altogether.
You may need to turn off Sync in Organizer prefs if you have it activated.

Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

Hi All,
I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
(We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
Thanks in advance.
Ameesha.

Hi Ameesha,
i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
try this once.
All check this link.
[Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
Hope it helps.
Regards,
Raj

I am having trouble logging in to my iTunes Account. When it ask mI am having trouble loe to verify my payment information. I check that everything is correct and it gives me this error message " Please contact iTune support to complete this transaction"?

I am having trouble logging into my iTunes Account. When it ask me to verify my payment information. I verify that all the information is correct and press the done tab and get back this error message " Please contact iTunes support to complete this tranaction". What do I need to do to correct this problem because I can't buy anything with this problem? I have also made sure I have the latest version of iTunes.

check all payment parts are filled in and u have endered you last 3 digs on back on card used to set up account
if using an other computer make sure all fileds are right and filled in
and u enter to itunes sec code

I am trying to download itunes 10.6 and keep getting this error message, "The feature you are trying to use is on a network resource that is unavailable to a folder containing installation package itunes64.msi". What do I need to do?

I am trying to download itunes 10.6 and keep getting the error message "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes67.msi". Where do I find this or how do I get it?

"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error messege- Please enter a valid date in Background Job

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,
Did you put the date fields to be dynamic in your variant? i.e if in your variant you specified date range of last year, this will not work for this year and eventually give you an error message that the date is not valid...
Dev.

How can I print emails? Printing Error message that no printers are installed. (Printers are installed.)

When I click File > Print, I get a Printing Error message that no printers are installed. Printers are installed. When I click Yes to install a new printer, I receive a new error message that "Windows can't open Add Printer / The local print spooler service is not running. Please restart the spooler or restart the machine." I updated to the new version of Thunderbird 24.6.0. Using Windows 8. I restarted the machine. I confirmed printers are installed using Control Panel. I do not see any way to restart a print spooler. How can I fix this? Thanks.

The print spooler is a windows service and is required to print. I would hazard a guess you can not print with any application.
What I am saying is I think your windows instalation has a problem, not Thunderbird.

After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine:Are you sure you want to back up to the same device your original data is on? the WD disk has mounted??

After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine: "Are you sure you want to back up to the same device your original data is on?" I've reformatted in Disk Utilities...not sure what I did wrong. Any help would be appreciated.

Not sure what you mean by "booted" from it.
If the Mac OS is installed on the external drive, then it's possible to start up from it, just as you do from your internal drive. Please open the Startup Disk preference pane in System Preferences, and verify that your internal drive is selected as the startup disk.
Assuming that's the case, then it may be that your TM settings have been corrupted. Turn off TM, then move or delete the file /Library/Preferences/com.apple.TimeMachine.plist. Turn TM back on, recreate your settings, and try again.

Error messages in ABAP program are stored in which table

hi all,
Can anyone tell
error messages in ABAP program are stored in which table??

Hi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
Fuction module for storing error messages ->'format_message'
for example...
data : v_message(100) type c.
call transaction NNNN mode A update S messages into it_messages.
loop at it_messages where msgty = 'E'.
call function 'format_message'
exporting
*it_messages details
importing
v_message.
write :/ v_message.
clear v_message.
endloop.
Anothe method - ->
Here is a sample of the program code for that:
LOOP AT it_messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = it_messtab-msgid
lang = it_messtab-msgspra
no = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
msg = g_msg
EXCEPTIONS
OTHERS = 0.
IF it_messtab-msgtyp = 'S'.
it_sucess-sucess_rec = g_msg.
it_sucess-lifnr = it_header-lifnr." Based on your field
it_sucess-tabix = v_lines.
APPEND it_sucess.
ELSEIF it_messtab-msgtyp = 'E'.
it_error-error_rec = g_msg.
it_error-lifnr = it_header-lifnr.
it_error-tabix = v_lines.
APPEND it_error.
ELSE.
it_info-info_rec = g_msg.
it_info-lifnr = it_header-lifnr.
it_info-tabix = v_lines.
APPEND it_info.
ENDIF.
ENDLOOP.

HT3702 I can't contact itunes store. And I recived error messages: Please iTunes support to complete iTunes

I can't contact itunes store. And I recived error messages: Please iTunes support to complete iTunes ID [email protected]

You will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
Regards.

Error message PLEASE ENTER BUSINESS AREA

Similar Messages

Maybe you are looking for