Error message procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I keep getting error message: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy
Similar Messages
-
I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well. -
I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working". Help!
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
After an update, every time I start my computer (that uses 64-bit Windows 7), there is an AppleSyncNotifier.ex-Entry Point Not Found message, "the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll. I have checked and tried suggestions to resolve this from this site and several other places with no success. Appreciate advice how fix and resolve this
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Whenever I boot my pc, which operates on windows 64 bit, I receive the erroer message: 'The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll'
This appears to be a common problem, can anyone provide me with a 'user friendly' solution please?Remove MobileMe if still present on your computer.
Otherwise see Troubleshooting issues with iTunes for Windows updates.
tt2 -
After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.
Hi, I get the same error EVERY time iTunes updates.
I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
My Question:
Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
Thank You,
Steve -
I received a message that an update of QuickTime was available. I decided to update. When I re-started my computer, a shrill noise (error noise) occurred and a message popped up in a box: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll Does anyone know what this means and how to correct it? PLEASE!
Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder" -
the procedure entry point Sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. what does this mean?????
Hi Vas, I'll do my best.
I don't think the current error message you're getting is related to the previous one.
I have researched a little bit on the error message you're getting, and it seems to be one that has been going on for a few years, and from what I can see it relates to the iPod Photo cache folder.
It also appears that the actual phone does sync even though you still get this message.
I suggest you have a look at these webpages for further information
https://discussions.apple.com/thread/2441003?start=0&tstart=0
http://support.apple.com/kb/TS1314
Good luck and let me know how you get on -
When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?
-
I cannot sync my iPod. I keep getting the following messagei: AppleSyncNotifier.exe. entry point not fond. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll Help!
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
Hi,
Since downloading the updated version of itunes around May this year I have had the following problems:
1. This error message appears when my windows account launches:
the procdure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
2. I can't play any of the files in my itunes library. An error message appears indicating it can't find the files.
3. When I plugged my iphone in to update it was corrupted and I have lost all 7000 + songs.
You can guess that I am not a very happy bunny with itunes at the moment!
Please, can anyone suggest how to sort this lot out. I am aware that I've probably lost the ipod songs, but I need to get rid of the error message and be able to play the songs on from my library. I've been without since May now and I'm wondering whether to even bother getting it sorted, but I have quite a few albums purchased on itunes that I don't want to lose!
Thank you for your time.
MichelleThank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle -
Getting the massage when starting up PC - Apple Sync Notifier.exe - Entry Point Not Found - The procedure entry point sqlite_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. How do I eliminate this message?
I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?
-
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
need a fix to error message...AppleSyncNotifier.exe - Entry Point Not Found The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
Any answers how to fix it? All Im getting is error for the past 3 days!
Maybe you are looking for
-
Can i have two apple accounts for seperate phones on one computer
i have two iphone work and buisness can i have seperate apple accounts on one computer, to keep contacts etc seperate
-
Sequence of items in 'to do' list now abritary after adding a new calender
Hi I doubt there is a fix for this but I would like to understand the problem. I added a new calender (on the left, in a new color) and my to do list is now scrambled. The sequence of items was important, they were grouped, and now they seem to be in
-
Difference between RFC, SYSTEM and AUDIT users?
Hi All, Can you highlight the main differences between the following users: RFC SYSTEM AUDIT how do their functions differenciate them ? Thanks in advance, Diwakar
-
I've just bought an iMac OS X Lion 10.7.4 (11E53) but there is NO iDVD on it. So how can I get it or how can I burn a movie onto a disc without iDVD? Thanks
-
Hello every one, I am trying case it is giving me an error of missing expression, not sure what am i missing. It in the document. http://download-east.oracle.com/docs/cd/A91202_01/901_doc/server.901/a90125/expressions5.htm#1033394 SQL> ed Wrote file