Error Message: Project Manager has run out of Memory

Hi there
So. I’m running Logic Pro on a Mac Pro and a Mac Book. No problem with it on the Mac Pro, but get this error message every time I open Logic on the Mac Book:
Project Manager has run out of memory.
The Mac Book has 1GB 667 MHz DDR2 SDRAM and 43 GB Hard drive space available.
Can you help?
Kind regards
Tim Arnold

Ah yes, good old Project Manager. There are plenty of times when it causes more problems than it solves.
You might try deleting the following folder:
User/Library/Preferences/Logic/PM Data
If you use Project Manager, it's easy enough to rebuild the table. If you don't then don't worry - just delete it. By the way, if you're into Project Manager or would like to know more, go to the website of the perhaps the most generous man in the Logic world, Edgar Rothermich and grab some of his user manuals.
http://homepage.mac.com/edgarrothermich/Manuals.html
Pete

Similar Messages

Project Manager Has Run Out of Memory????

i've been using Logic Pro 7 for about a week. i've only created 2 very small projects so far. today, when i opened up a Logic, a window immediately opened in my new blank session that said "Project Manager has run out of memory". What does this mean??? I'm not really sure what restrictions i'm now dealing with, but i do know, that now, when i try to import an audio file, such as an mp3, i am not allowed to do it. The window opens, and i select my itunes folder, and i see all my mp3's, but it wont let me click on them!!
What is going on????? i have 30 gigs of space free on my hard drive. Why is it saying that my project manager has run out of memory??? I have no idea what this means!! I'm seriously ready to throw my Macbook at the wall and go back to PC cuz it causes me way too many problems.
Thank you for your time.

Project Manager was something of a beast on Logic 7 and has been removed in Logic 8 with nobody that I've heard complain about its demise.
You would do well to delete the existing Project Manager configuration file which is found at:
user/Library/Preferences/PM Data
You won't cause any problems by doing that and you're 99% certain to fix your problem. For more info on location of the preferences files, see:
http://docs.info.apple.com/article.html?artnum=301005
Hope that helps.
Pete

Mac Desktop Manager - Device has run out of memory

So, long story short, this is the latest (of a very long string) of error messages. I have been able, with the help of these forums, to troubleshoot all the others.
I am syncing my BB 8120 (v4.5.0.174) to iCal with the Desktop Manager, only set to sync calendar. It simply drops with an error that the 'Device has run out of memory'. Checking the Applications tab shows 17mb of free space.
History:
I got this Blackberry a few months ago, deciding I wanted a robust phone with good battery life that had email.
I use gmail. Apparently this is not compatible with BIS, and had continual problems. This is still unsatisfactory - I have to use the gmail app which causes problems (hanging) and does not support push.
I was dismayed to discover that a Blackberry sync client for Mac had only recently been announced, however I persevered.
When it was released, I started using it, but it has continually given errors on all manner of different combinations.
I recently solved the contacts problem by syncing using the Google sync, which syncs also with my mac over the air.
This is not a solution for the calendars because iCal does not support google calendars well enough for my liking.
The phone sporadically has a spinning hourglass, for what reason(s) I cannot determine, even after battery pulls etc.
Suffice to say I have spent hundreds of hours troubleshooting this phone over the last months. For a phone whose main selling functions are email and organisation, it does neither of these reliably or well.
If I do not solve this problem soon I will return to my old phone which supported everything above more reliably, and had 4 times the battery life to boot. The only thing I would miss is the qwerty keyboard.
Mac OS 10.6.2 MacBook Pro

Ah yes, good old Project Manager. There are plenty of times when it causes more problems than it solves.
You might try deleting the following folder:
User/Library/Preferences/Logic/PM Data
If you use Project Manager, it's easy enough to rebuild the table. If you don't then don't worry - just delete it. By the way, if you're into Project Manager or would like to know more, go to the website of the perhaps the most generous man in the Logic world, Edgar Rothermich and grab some of his user manuals.
http://homepage.mac.com/edgarrothermich/Manuals.html
Pete

CVI 2013 Error: The compiler has run out of memory.

Hello,
I get this error in a source file I'd like to debug:
1, 1 Error: The compiler has run out of memory.
1, 1 Note: You may be able to work around the problem:
1, 1 A. Set the debugging level to 'no run-time checking'.
1, 1 B. Split your source file into smaller files.
1, 1 C. Enable the 'O' option for your source file in the project.
1, 1 D. Move large static data structures into new files and
1, 1 enable the 'O' option for the new files.
Options A and C disable debugging aids mostly, and I don't dare editing it.
So any possibility to increase the memory limit?
/* Nothing past this point should fail if the code is working as intended */
Solved!
Go to Solution.

This is the "strange code"
#pragma pack (push,8)
typedef struct
int struct1int;
} STRUCT1;
typedef struct
STRUCT1* s1_ptr;
} STRUCT2;
typedef struct
char c[2];
int i;
STRUCT2 s2;
} STRUCT3;
#pragma pack (pop)
static STRUCT3 s3_global;
void SomeFunc(void)
s3_global.i = 0;
I believe clang fails to compute the struct paddings.
/* Nothing past this point should fail if the code is working as intended */

When I try to access one of the areas in a website, I get an error message that it has timed out.

When I try to access one of the areas in a website, I get an error message that it has timed out.

I've been getting timed out for 2 days now, what finally worked for me was not plugging the phone into the computer and just doing the update through my wifi, worked perfectly, took less than 15 minutes

HT4972 after i wait for about 40 minutes a error message says network has timed out....help me...

I wanted to update my ipod 4 gen. from ios 4.1 to 5,,,but after i click update and after its starts downloading the ipod software update and after waiting for 40 minutes a error message saying network has timed out appears....i tried turning off the firewalls but it did not work....help me pls,,,

Did you also disable the computer's antivrus program?

I have an ipad 2 and attempted to buy app from apple store ,i am getting this error message your session has timed out

i have an ipad2 with software up to date and attempted to buy app from apple store i am gettig this error message
your session has timed out, is anyone to help?

Hi..
Try a reset...
Tap Settings > General > Reset > Reset Network Settings
Then restart your iPad.
Hold the power button until "slide to power off" appears. Slide to power off. After it is off, press the power button to turn it back on.

Target has run out of memory on LM3s8962

I'm using the LM3s8962 evaluation kit to record data from the ADC's. I have the system set up so that I use the elemental nodes of the four adc's in a while loop, and replace the values in four different arrays. The arrays are initialize (1x1000 elements) before entering the loop. This works fine.
THE PROBLEM: When I try to make the arrays larger (i.e. initial arrays larger than 1000 points, 4 individual arrays), I get the following error:
Error: Memory allocation failed. The target has run out of memory. [C:\Program Files (x86)\National Instruments\LabVIEW 2011\CCodeGen\libsrc\blockdiagram\CCGArrSupport2.c at line 253: 2 3
OR
Error: Memory allocation failed. The target has run out of memory. [C:\Program Files (x86)\National Instruments\LabVIEW 2011\CCodeGen\libsrc\blockdiagram\CCGArrSupport2.c at line 173: 2 3
Any suggestions?

Th0r wrote:
It looks like you're filling up the flash memory on the LM3S8962 with all of these array initializations. According to page 263 of the LM3S8962 datasheet, that microcontroller has 256 KB of flash memory which you can use to fill up with your code. In addition to your array initializations, some of this space is taken up by the LabVIEW Embedded Module-specific code as well. What datatype are you using in these arrays? Does this error occur upon building or running your code? Thanks for any additional information you can provide!
That's probably it. The error occurs when building the code, before it's actually able to run. If reduce the array size, I'm able to run the code no problem. At the moment, I'm using a long 32 bit integer, which I know realize I can reduce significantly, as my ADC only reads at 10 bits. Do you know if there's a way that I can preallocate the array to a place other than flash?
I've found a fix around it since I last posted, in which I set up a buffer (smaller) and then save the buffer values on the SD card. This works well and I can sample for long periods of time, but it does slow down my overall sampling rate, so I'd like to fix the above problem nonetheless.

MySQL has run out of memory ::Help needed::

::Help needed::
I've created a PHP web application in Dreamweaver, which uses a MySQL database, containing 14 tables.
On one page, I use a an SQL query to select data from 10 of the tables in the database.
However, when I try to preview the page in a browser, a PHP warning stating that the MySQL engine has run out of memory.
Is there a way of increasing the Memory Cache of the engine, or a way to optimize the performance?

Is this happening locally?
If it is, try rebooting your system and see if this fixes the problem. If not then you have a problem with your code. If it works locally but not on the server, then you know it's not something in your code causing the issue, so you can confidently go to your host support and have them sort it out.
With any such situation, testing locally first is a vital debugging step.
Hope this gives you a path to follow.
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF
www.twitter.com/LawrenceCramer

BPC 5.0.502 BPC Web Error Message: Exxception of Type System out of memory

In the process of updating a web page in the content library, page crashed received an error message of "Exception of type System out of memory. Exception was throw". What does this mean? We are now unable to open this sheet without receiving the prior message. Any remadies would be appreciated.

Hello,
    Did you receive this specific error message only managing that web page or for all pages?
    Did you try to stop all COM+ components on the application servers(on each if you are using more). It looks to be related to some memory problems.
    If the problem is related to a specific web page, the problem can be related to the content of that web page.
Best regards,
Mihaela

Getting error message your connection has timed out" when I click on a link

when I click on a link within a email I get the message "your connection has been reset" I just removed several suspicious add ons that were causing constant pop ups.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

I am getting a constant error message on my desktop."Out of memory at line 50?

For the last two weeks, when i use my Windows 7 computer, i keep getting an error message which states, webpage error, out of memory at line 50". The error message also states the same problem at other line numbers? I have run error checking and attempted a defragmentation on Drive c. unable to correct this problem. Can anyone help?

Run a clean installation of Firefox 10 and check
* getfirefox.com

8330 Error Message: Desktop manager has encountered a problem and needs to close

I have installed Desktop Manager and had success synching my new 8330 with Outlook 2007 (on XP). Next time, though, it crashed. I uninstalled/reinstalled, it seemed to work once, now always crashes. I do have recurring appointments with reminders and have heard this might be the problem; is there a workaround? I also disabled the option to synch up past appointments w/no luck. Thx.

Hi. I did get my problem resolved after an hour or so on the phone w/the Blackberry folks, but I'm not positive what the problem is/was. I once again uninstalled the desktop manager, but also deleted the Intellisync folder completely. Then I reinstalled it and it worked...and has continued to work just fine for the past four days. I don't really know what "fixed" it, but just thought I'd say the issue has been resolved. Thanks.

CVI 2013f1 Error: The compiler has run out of memory.

Hi again,
#pragma pack(push,1)
typedef struct
char sub_c;
} SUBSTRUCT;
#pragma pack(pop)
#pragma pack (push,8)
typedef struct
char c;
SUBSTRUCT sub1;
struct
int i;
} sub2;
} BUGGY_STRUCT_AGAIN;
#pragma pack (pop)
BUGGY_STRUCT_AGAIN s = {0};
int main (int argc, char *argv[])
return 0;
fails to compile, too.
Even with f1 patch.
/* Nothing past this point should fail if the code is working as intended */

Hello CVI-User,
This appears to be a bug in our run-time checking. I have opened bug #450292 to track it and as a workaround I could suggest disabling run-time checking or using #pragma pack (push,8) only if necessary.
Best regards,
= Nelu F. || National Instruments.

Finale running out of memory

Mac Pro 3.5GHz 6-core Intel Xeon E5
Memory: 16GB 1867 MHz DDR3
IT of Flash
I am running OSX 10.9.5
The problem occurs when I use Finale 2014 3.4736 (latest version) music notation application with Garritan for Finale
Shortly after starting work on a small vocal score with piano accompaniment I am faced with the warning:
"Finale has run out of memory. Please save your work and quit".
No other applications are running.
How can this be?
Help is needed
Thanks Sion
Back

Hi ..
If you can, don't run other memory intensive apps while using the Finale app.
Open the Activity Monitor located in HD > Applications > Utilities then select the Memory tab.
From there you can see which apps are using the most RAM. (memory)

Error Message: Project Manager has run out of Memory

Similar Messages

Maybe you are looking for