Error message :PurchOrder : Unit of measure PC not defined for language ES,

Hello,
I am facing a problem with PO replication to R/3 backend.
POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)' .
When I check with 'RZ20' transaction I got this message :
PurchOrder : Unit of measure PC not defined for language ES.
SRM 4.0 Extended classic scenario
Regards,
Shaiek

Hi
This seems to be a configuration issue,.
Pls maintain the unit of measure in configuration using transaction CUNI
Hope this will help.
Pls reward suitable points.
Regards
- Atul

Similar Messages

Error as unit of measure PC not defined for language RO while creation ofPO

Hi GUYS,
When am trying to create a PO in ME21N transaction i got error as below,
unit of measure PC not defined for language RU
Message no. 06079
Table 006A contains no entry for this unit of measure
Please let me know what action to be taken from my side to over come this issue.
Note: If i check the related vendor i could able to view that the language maintained as RU.
Cheers,
Kumar.S

Hi Jurgen,
Thanks for your reply once again.
As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
Please revert back with your soilution.
Note: I have tried in SM30 but failed due to below error
The maintenance dialog for T006A is incomplete or not defined
Cheers,
Kumar.S

Unit of Measure TON not defined for language PT ?

Hi all,
I'm new to MM and to SAP in general and I have 2 questions for now :
1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
I also can not convert TON into EA...any ideas why?
2. How can I see the total value of a PO that has many lines ?
Thank you very much
Iuliana

Hi
Is this error "" Unidade de medida *** não definida em idioma PT ""
appearing only when you select Ton, or any other unit.
pl. clarify.
I have seen that you get this message when your loging Login language is Portuguese.
Any how Configuration of units needs to be checked in
Spro >General setting > check Units of measurements ,
( or pl. use Tcode -- Cuni )
I also can not convert TON into EA...any ideas why?
can you give me some more inputs, what erro are u getting ?
2. you can see the total Po. values in Po header details
under status tab view.
if my soln is found usefull
Pl. award me points
Thanks
Prasanna kumar .b.a

Unit of measure PCS not defined for language FR

Dear Gurus,
I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
"Unit of measure PCS not defined for language FR"
I then went to MM02 to check the material master data "Sales Text" Tab.
There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
The problem is that when I want to save the changes, the system prompts me with the following message:
"Blank texts exist in the following languages: French and English, these texts will be deleted"
Then the Material Master Data closes and no changes have been made.
Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
Thanks for your help.
KInd regards
Chris

Hi Chris,
Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
Enter EN in Source language and FR in Target.Maintain the entry there.

Unit of measure EA not defined for language PT

Hello,
Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
"Unit of measure EA not defined for language PT"
Table 006A contains no entry for this unit of measure.
We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
Checked T006A table for "EA" found for language "EN, DE, CN etc. not for "PT" how to maintain T006A table for Portuguase langauge.
Regards
Mahesh Naik

>
Mahesh Naik wrote:
> Hello,
>
> Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

Unit of measure EA not defined for language RU

Hi gurus,
have you encountered this error while creating a PO? can't find any supporting document online.
please help how to resolve.
thanks,
mm

Hi Manohar,
Language RU (Russian) is not defined in our system and therefore the translation in CUNI is not the appropriate solution for this error.
Instead, we just maintained the vendor master to be in EN language to stop the system error.
thanks for your input anyway.
melanie

Error in BAPI_MATERIAL_SAVEDATA - Unit of measure ****** is not defined;

Hi,
I am using the BAPI_MATERIAL_SAVEDATA to create material in the material master, I am passing
    ls_bapi_head-basic_view    = 'X'.
    ls_bapi_head-purchase_view = 'X'.
    ls_bapi_head-mrp_view      = 'X'.
    ls_bapi_head-storage_view = 'X'.
    ls_bapi_head-quality_view = 'X'.
    ls_bapi_head-account_view = 'X'.
these views, I am passing the necessary details to the BAPI . But it is giving me an error ' **Unit of measure ****** is not defined; check your entry**'. plz help me how to solv the problem.
Thanks,
shekar

Hi Vinod,
It was very usefull for me thanks,
I have another problem i have to pass Valuation Class - bklas and in quality view nspection Type - 'art', Inspection Type - Material Combination is Active - 'aktiv'.
please let me know how to pass these values to FM
thanks,
shekar

Error message TD427 (A text element is not defined for form J_1IEWT_CERT)

Hello,
Q> I assign the SAP script form J_1IEWT_CERT to 'SPRO=>Withholding Tax Certificates for Vendor and Customers' and was trying to see the print preveiw. But once I press printpreview button error comes "ELEMENT TITLEDET WINDOW TITLEDET IS NOT DEFINED FOR FORM J_1IEWT_CERT" and i can't see the printprview.
Same thing I tried with the copy of J_1IEWT_CERT from 000 client to ZJ_1IEWT_CERT; but same error is coming.
If i try the printpreview through SE71 it shows without error.
Thank You.

"test printing" via SE71 only prints what exists in the form. Here your form is missing TITLEDET window and element.
The print program tries to print TITLEDET but it does not exist. Could you check SAP notes to get correct versions of print program and sapscript form.

Unit of Measure BOX not defined in language DE

Hi Experts,
We have a Unit of measure BOX, it is used in a Purchase Requisition.
When converting this PR to PO the vendor entered has the language German(DE) and system throws out an error message mentioned in the subject.
I have checked in SPRO under UOM settings and found that this has been maintained for all the languages the path I have checked is SPRO --> SAP NetWeaver -->General Settings --> Check Units of Measurement --> ISO Units --> Select the UOM (BOX) and then in Menu options (Goto --> Translation).
Can anyone help me out what can be the other possible reasons.
Thanks a lot in advance.
Regards
Lucky.

Dear Lucky,
Normally this issue happens because a missing entry for unit in transaction CUNI.
To maintain this, enter the transaction: CUNI
   Click "Unit of Measurement" and maintain the following as below.
Unit           : XX
Commercial     : XX
Technical      : XX
Meas.unit text : Activ.unit
Please review SAP Note No.[15430|https://service.sap.com/sap/support/notes/15430]
Regards,
ian, Wong Loke Foong

Unit of measure not defined for language ZH

Hi,
We were creating a PO when we encountered the error which states "Unit of measure not defined for language ZH".
We executed CUNI to translate the units of measurement to our target language. System prompted "This object was segmented. Only new lines evaluated." What does this mean?
We tried creating the PO again, however we encountered the same error that the unit of measure was not defined for the language.
Please recommend action/s that we should take. Thank you.

Take a look at the below threads. Your problem has the solution.
Re: Unit of measure XX not defined for language DE
Re: Unit of Measure Error in Purchase order

Unit of measure JHR not defined

Hi Friends,
What can cause this problem. I am getting this error message
"Unit of measure JHR not defined" after I am creating a Shopping card in EBP.
JHR is existing on both sides Backend and EBP in the table T006.
Regards
Marco M.

COM_PRODUCT_UNIT
you need to debug this program . JHR is not SAP or international UOM . it could be customised one
COM_PRODUCT_UNIT_READ_API
Is a unit of the product convertable into i_unit?
    CALL FUNCTION 'DIMENSIONCHECK_DIMENSIONLESS'
      EXPORTING
        meinh                       = iv_unit
      EXCEPTIONS
        dimension_not_dimensionless = 1
        t006d_entry_missing         = 2
        t006_entry_missing          = 3
        OTHERS                      = 4.
    CASE sy-subrc.
      WHEN 0.
        MESSAGE e020(com_product_unit) "unit is dimensionless
               WITH iv_unit
               RAISING unit_not_allowed.
      l_lines = l_lines + 1.
        CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
          EXPORTING
            i_base_unit     = ls_base_unit-unit
            i_alt_unit      = iv_unit
            i_tabix         = l_lines
            it_pr_unit      = lt_pr_unit
          IMPORTING
            e_add_const     = l_add_const
            e_numerator     = l_numerator
            e_denominator   = l_denominator
            e_unit          = l_unit
            e_sub_num       = l_sub_num
            e_sub_denom     = l_sub_denom
          EXCEPTIONS
            not_convertable = 1
            overflow        = 2
            OTHERS          = 3.
        CASE sy-subrc.
          WHEN 1.
            MESSAGE e020(com_product_unit)
                  WITH iv_unit
                  RAISING unit_not_allowed.
   CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
          EXPORTING
            i_base_unit     = ls_base_unit-unit
            i_alt_unit      = iv_unit
            i_tabix         = l_lines
            it_pr_unit      = lt_pr_unit
          IMPORTING
            e_add_const     = l_add_const
            e_numerator     = l_numerator
            e_denominator   = l_denominator
            e_unit          = l_unit
            e_sub_num       = l_sub_num
            e_sub_denom     = l_sub_denom
          EXCEPTIONS
            not_convertable = 1
            overflow        = 2
            OTHERS          = 3.
        CASE sy-subrc.
          WHEN 1.
            MESSAGE e020(com_product_unit)
                  WITH iv_unit
                  RAISING unit_not_allowed.
          WHEN 2.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
                    RAISING overflow.
E        COM_PRODUCT_UNIT       020     Unit of measure & is not defined for product
When do you get this error ? while ordering Internal goods and services or describe procurement?
or while procure from catalog.

" Unit of measure ****** is not defined; check your entry in table T006

I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
" Unit of measure ****** is not defined; check your entry
Message no. M3490
Diagnosis
The key for the unit of measure you entered is not defined in table T006.
Procedure
Define the unit of measure through Customizing (Materials Management). "
In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
" Messages have been issued: number 0000000000184470
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data. "
If someone has information about it ,pls I´ll appreciate your answer.
Regards Itzell T.

I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
" Unit of measure ****** is not defined; check your entry
Message no. M3490
Diagnosis
The key for the unit of measure you entered is not defined in table T006.
Procedure
Define the unit of measure through Customizing (Materials Management). "
In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
" Messages have been issued: number 0000000000184470
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data. "
If someone has information about it ,pls I´ll appreciate your answer.
Regards Itzell T.
Hi Itzell T,
      While creating the material the unit of measurement which is entered is not existing in the SAP System. The unit of measurement entered during creation of material is cross checked from enteries of check table T006.
      So, functional consultant should take care of this issue just let him know the message.
   He know what problem actually is and fix the problem as Ankur had said.

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling

Error message 'Enter unit of measure' in Webclient

Hello Experts,
We are working on CRM 5.0 SP 7, IC WebClient and have implemented the BAdi "CRM_SERVICEPROD_BADI" to assign a service product ''INVESTIGATION' whenever user selects service ticket in WebClient.
However, when confirming a Business Partner and accessing the service ticket, an error is getting displayed stating "Enter the unit of measure".
We have already mentioned the unit of measure in Product but it seems it is not picking from there.
Please help me to remove this error.
Reward points assured for useful answers.
Regards,
Amit

hi
I had a similar Problem
You will have to assign the base unit of measure in service tab as hours and then in the sales and distribution tab assign the same unit in the sales unit and give minimum order quantity(for e.g-1) & delivery unit ,this you will have to do for all the sales areas you might have mapped in the S&D tab
I'm sure the issue will be resolved
Cheers!!
Regards
Shankar Raj

When opening XHTML page, getting error message "Attribute ....space not declared for element 'pre' "

Hi all,
We are trying to use XHTML to author some of our documentation. The plan is to use FrameMaker to convert the docs to PDF format.
The input file contains the following offending line:
<pre xml:space="preserve">
This should be allowed according to the www.w3.org/1998/xhtml spec.
The actual FM log message is:
Message: Attribute '{http://www.w3.org/XML/1998/namespace}space' is not declared for element 'pre'
Any hints? I am using Frame Maker 9, by the way.
Thanks,
Frances

In case anyone is interested the base solution given by dvohra09 can be expanded to solve the problems.
(1) It appears the parser raises errors against any unknown attributes, including xmlns:xxx="...". Solution is either to declare them in the dtd element you would like them to appear in (as in answer from dvohra09 ).
(2) You have to explicitly force the tags in the DTD into the correct namespace using prefixs to ensure the correct ones are picked up , e.g.:
<!ELEMENT nstag:mytag (mysubtag+)>
<!ATTLIST nstag:mytag xmlns:nstag CDATA #FIXED "http://www.someOtherURI.com/xxx">
you then have to refer to the tag as <nstag:mytag>.
This doesn't appear to be how the XML/namespace specs (or the slideshow example) say it should be. They imply (1) should silently declare the new namespace prefix, and (2) should work without prefixes because the DTD filename is used as an explicit namespace.

Error message :PurchOrder : Unit of measure PC not defined for language ES,

Similar Messages

Maybe you are looking for