Error message: Ship-to party 1111 not defined for sales area 1000 01 50

Hi friends,
I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
When created SO, I got a error message saying " Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
Please advise where I missed configuration.
Thanks,
Linda
Edited by: LindaSAP on May 25, 2010 5:40 PM

Hi,
Please check the below links
Ship-to party not defined for sales area
"SHIP TO PARTY NOT DEFINED FOR SALES AREA "
Ship to party is not defined for sales area..
Ship-to party not defined for sales area
Ship-to party 147 not defined for sales area US DS 20
ship to party -sales area error
Regards
Senya

Similar Messages

Ship-to party 1600 not defined for sales area 1000 10 20

Hi Friends,
I am making inquiry(VA11).I am using a material and sales org.combination as (1000/10/00).
I have maintained the same sales org. for material also.i am using for example sold to party as 1600 and for this I checked in XD02 the combination of sales org is (1000/10/00).
But after hitting enter I am getting the errror as Ship-to party 1600 not defined for sales area 1000 10 20 but for 1600 customer ship to party is defined in (1000/10/00).
This error I am getting is quite unusual.(as I am using 1000/10/00 this combination exist for material and customer but why am I getting the error for 1000/10/20. ?).
Any pointer will be rewarded.
regards

in mm02 i have already changed the division as 00 but still getting error(looking quite strange)
same error I was getting earlier but got the solution after changing division in mm02 but not striking this time.
also in xd02 for sales org 1000 and div. 20 i maintained both reference division for condition and reference division for customer as 00 bot no result yet.
same error.
Any other inputs.
Regards
Edited by: Amit Kumar on Oct 29, 2008 8:39 AM

Ship-to party 10106086 not defined for sales area 6000 40 30 error

HI gurus,
We have maintained cross divisions 00, we VR02 have maintanied the combined the divisions and we have maitned the division at MM01, we are getting VP210 error: Ship-to party 10106086 not defined for sales area 6000 40 30.
please help me in this we are unable to create a order.
this is urgent.

Hi,
The error is Ship-to party 10106086 not defined for sales area 6000 40 30
Here system is considering distribution chan 40 & division 30
Go to VOR1 and maintain like as
Sales ogz - Distribution channel - Distribution for Condition - Distribution chn for CUST/MATERIAL
6000 - 40 - 40 - 00
Then in VOR2
Sales ogz - Division - division for Condition - division for CUST
6000 - 30 - 30 - 00
Then also check you have created customer for sales area 6000-00-00
Check in VOV8 go to details of your sales order type under general control tab Check division should be blank
OR
Remove division form material master basic data tab 1
Kapil

Ship-to party 147 not defined for sales area US DS 20

Hi,
I am getting following error while creating a sales orcer with ref to contract
Ship-to party 147 not defined for sales area US DS 20
Points will be rewarded for satisfactory answer.
Thanks & Regards,
Vinayak

Hi,
After maintaining in US DS 20 it is working fine.
But normally we never maintain in US DS 20 for other transaction.
then why it is asking for this transaction.
we always create in US DS 10.
is their mistake while creating a BP or any SPRO changes required.
Thanks & Regards,
Vinayak

Ship-to party not defined for sales area

Hi all,
I am really confused while creating a sales order, I need your help.
My sales org. - 1083, distribution channel - CY, Division - CW.
When I enter va01, in the initial screen I enter the above details. Then it goes to the create sales order screen where I enter my customer details.
After that, I enter my material number and quantity, it is giving me an error ship-to-party not defined for sales area 1084 CY and ZO ( other division) instead of 1084 CY and CW.
Where did I mess up ?
Thanks,
-Chandru

Hi,
Go to SPRO - SD - BASIC FUNCTIONS - PARTNER DETERMINATION Just check whther your partner function (SH) is assigned to your account group and also exists in the partner determination procedure.
Just try and maintain it there against your account group and against your sales document type in VOV8.
Also open your customer master for which you are trying to create this sales order. Just check whther in the partners tab , SH is shown? You can either use transaction BP or XD03.
Let me know, reward points if helpful.
Regards
Ravi

Ship to party not defined for sales area x/y/z

Hi Friends,
While creating sales order I am getting following error---
Ship to party not defined for sales area x/y/z .Please help to overcome this problem.
xsales organisation ; ydistribution channel ; z--division
Regards

Please go in Transaction XD01- Create Customer.
then in Account Group, Select Sold to Party.
Assign sales area , xsales organisation ; ydistribution channel ; z--division
and check.
Hope thiswill solve your problem

Err.Sold-to party 1 not mainted for sales area EL01 01 01

Hello SAP Gurus
I am trying to save a quote from an external application using .NET connector which calls the bapi 'BAPI_QUOTATION_CREATEFROMDATA2'.
I am getting back an error
E VP 197 Sold-to party 1 not mainted for sales area EL01 01 01 .
I am trying to search for this error on all SAP related areas and am not able to find anything that answers my question.
Any feedback will be highly appreciated.
Thanks
Ram

>
Ram Prasad wrote:
> Fortunately or unfortunately I am the only SAP guy in my company and I am actually certified in XI and but am wearing different caps at different time.
..Exactly You remind me my early career of SAP,I was the Only Person In My project,No matters it was kind of Support one,But i had been asked to handle some Tedious Asset Accounting isses-Some how i servived and turn the things around me,And Believe me The Stuff i learnt in such tiny 7 month is far More than i learnt my rest of my Life.
Fortunately~

Ship-to Party is not maintained in sales area

Hi,
While creating a sales order for a company code and if we give a different ship-to party, which is not belongs to that sales area, I'm getting a message "Ship-to Part XXX is not maintained in sales area abc xxxx yy zz".
When I tried to add one more partner at header level, say "Mark for customer", and give the different customer number, the error is not coming.
Can anyone tell whether this check will be done only for standard partners like Sold-to, Ship-to etc? and not for custom partners?
Thanks,
Kishore

Try the following:
BADI_SD_SALES General Enhancements for Sales Order Proces
BADI_SD_SALES_ADDON Special enhancements which are not universa
BADI_SD_SALES_BASIC Enhancements for Sales Order Processing Par
BADI_SD_SALES_ITEM Enhancements for Sales Order Processing (It
Andrew

Error:Ship to party not defind for sales area

Dear Friends,
I created a material for sales area 1000/10/00.
The division that i assignes was 05 in MMD.
Now when i create a order the system gives a messege "ship to party 1033 not defind for sales area 1000/10/05, but at the order initial screen i had given sales area 1000/10/00.
Where is the problem?
regards
debasish

Extend or create the customer to the sales area 1000/10/05 or change the division in the material as" 01" then ur problem will solves.
Regards,
kishore.
Edited by: kishore gopala on May 13, 2008 1:12 PM
Edited by: kishore gopala on May 13, 2008 1:26 PM

Error message FI 759: Fund does not exist in FM area

Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
    fields' in the standard layouts, in other words depending on the
    permissibility of the initial value for a field an entry is always
    demanded. To prevent this there are two options:
    a) Copy the desired standard layout into an own (transaction KP65,
       KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
       set the corresponding field to 'Optional". Then, add this layout
       to your planner profile with transaction KP34.
    b) Implement the attached program ZK555134 (correction instruction
       461025). After the entry of planning area and layout all fields
       of the Funds Management are set depending on your selection of
       'Optional' or 'Not optional' (standard system). Like this you can
       also change standard layouts. The check for the fields for which
       'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa.

Tax condition(JVAT) of ship to party is not triggering in Sales order

Hi,
Tax condition(JVAT) of ship to party is not triggering in sales order...
Scenario:
Tax condition types:
JCST- CST Payable
JVAT- VAT Payable GJ
Customer Tax classification for JVAT in OVK3:
1- VAT 4%
A- VAT 0%
B- VAT 2%
Material Tax classification for JVAT in OVK4:
0-Tax Exempt
1-Full Tax
In CMR for
Sold to Party:1001(Mumbai), In Sales Area Data(Billing Tab),we have
Country/Name/Tax category/Name/Tax Class./Descrption
IN / INDIA / JCST / CST Payable / 1 / CST 3%
IN / INDIA / JVAT / VAT Pay GJ / 1 / VAT 4%
In CMR for
Ship to Party:2001(Gujarat),In Sales Area Data(Billing Tab),we have
Country/Name/Tax category/Name/Tax Class./Descrption
IN / INDIA / JCST / CST Payable / 1 / CST 3%
IN / INDIA / JVAT / VAT Pay GJ / A / VAT 0%
Access Seq: JLST
Condition table : 368(Country/Region of Del Plant/Region/Tax class1-Cust/Tax Class1-Mat)
Condition record maintained for JVAT as IN/GJ/GJ/1/1 as 4%
Condition record maintained for JVAT as IN/GJ/GJ/A/1 as 0%
Now the sale(Shipping to) is happening in Gujarat..
In sales order
I entered SP:1001 and SH: 2001
When i check the pricing in sales order,condition type JVAT is triggering 4% which is not true as it as to pick 0%
Kindly guide me where i went wrong...
Regards
Azeez.Mohd

Hi Friends.
I found the solution...
Its customization mistake..
Solution:
When we have 'n' tax categories then we should have 'n' condition tables..
I have 2 tax categories: JCST and JVAT but i have only one condition table 368 which is wrong.. i should have 2 condition tables.. so i created another con. table 468 and assigned to access aeq JLST.
then when i create cond. record , we have to select the appropriate table then it will fetch accordingly.. in sales order..
with regards

Error message is "this accessory is not optimized for this iphone" how can i delete the accessory? have an iphone3gs

error message is "this accessory is not optimized for this iphone" how can i delete the accessory whatever it is? the phone does not tell me. Thank you.

I have same problem which drives me nuts - phone lights up in middle of the night and displays message every hour or so. Something is obviously not right and it's not dust on the connector.

Material not defined for sales org

Hi,
when i try to select the item code in CUSTOMER-MATERIAL info. i cant able to get the item which created in MM01. and also getting the message .
"material not defined for sales org". can you help us how to resolve this one.
thanks
Bala

That means that particular material has either been created without extending the required sales views or material code has not been created.
Go to MM01, key in that material code, select all sales views and execute. Maintain the required sales area and save.
thanks
G. Lakshmipathi

Order type has not been defined in sales area '1000','10','00'

Hi Gurus
I am getting this error when try to create order
Order type has not been defined in sales area <'1000','10','00'>
but I checked in the configuration and assigned
SPRO:SALES:SALES : DOCUMENTS :SALE3S DOCUMENTS HEADER:
ASSIGN SALES DOCUMENT TYPES : Assign sales order types permitted for sales are :1000 -10-00
But still I am getting this problem when trying to creates sales order from va01.
Thanks
Kris

SPRO --> Sales & Sistribution --> Sales --> Sales Document Header --> Assign Sales Area to Sales Document Type
The above is one option.
Also Check Sales Document Type in T.Vode: VOV8
SPRO --> Sales & Sistribution --> Sales --> Sales Document Type
whether The Sales Document Type is Block, which could also be a possible reason.
Also check the Sales Area setting.
Regards,
Rajesh Banka
Reward points if useful.

BAPI_CONTRACT_CREATEFROMDATA not defined for sales org distr channel langu

I am using BAPI_CONTRACT_CREATEFROMDATA to create a contract. If I use a material other than a product, I get no error. If I used a product type material< I get an error statign that the material is not defined in sales organisation dirtibution channel langu EN (I have checked the material and it does contain text.
Any ideas what the problem is?
Thanks,
Leanne

material is not extended to the sales org, etc., (see table MVKE) or you're supplying wrong combination of VKORG, VTWEG, SPART values.

Error message: Ship-to party 1111 not defined for sales area 1000 01 50

Similar Messages

Maybe you are looking for