Error message: "the previously selected audio interface is not available"

HELP?!?!?!?!?
I'm stuck, and I can't go forward. Here's my issue:
I've bought a Focusrite Saffire LE, a simple firewire audio interface, for use with my Logic Express 7 (with all the latest updates). I run the setup assistant and select my saffire as the audio interface to use, and then when logic runs I get the message "the previously selected audio interface is not available" and it defaults to my Macbook Pro's internal microphone and speakers.
Just for sanity I've tested the audio interface with garageband and it's fine. My other audio apps aso run fine using the saffire as the audio interface. The setup assistant for logic has no problem finding the saffire, so why does it get rejected as soon as logic starts?!?!?
Please - this is driving me crazy.

I asked Focusrite for some help, and they said it should work (which I knew) and made some suggestions. Here's their email:
"Saffire LE should work fine in Logic Express.
Try resetting your logic preferences. Go to Logic > preferences > initialise all except key commands.
Do you still have the same problem?
Do you have any other firewire devices attached?
Have you had any other interfaces installed in the past?"
All good suggestions, but so far no luck.
Has someone else got the same config as me? (15" Macbook Pro and focusrite saffire le)?

Similar Messages

  • M Audio firewire solo with yosemite - 'The previously selected audio interface is not available'.

    Hi, I recently bought a new mac mini with yosemite OS. I plugged in my M-audio firewire solo and (after a bit of trouble) finally managed to see it appear in GB. then moments later a dialogue box appears with 'The previously selected audio interface is not available'.
    There doesn't appear to be any update drivers from M-Audio and the CD that came with the interface also does not work?
    I can't find any information with this problem. Can any one help?

    Oops. . . A loose lead connection may have been the problem, although still not receiving a signal?

  • I keep getting the iTunes error message "the item selected is not available in the UK store" how do i fix this please ?

    I keep getting the error message " The item selected is not available in the UK store" and i am not able to do anything else with iTunes, any idea how i fix this as it appears to now be restricting my account access across the Mac Book, iPad, iPhone and Mac Mini in the house ?
    Thanks

    Hi Thanks,
    I could only see posts from some months ago and thought I had something different.
    Looks like I have not been using the correct search terms.
    Will wait and see what happens.

  • I downloaded the latest version of itunes.  Now I cannot open iTunes.  I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll.  Thoughts?

    I downloaded the latest version of iTunes on my PC.  Now I cannot open iTunes.  I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll"  After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127)".  I've uninstalled iTunes and reinstalled to no avail.  I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck.  I also tried system restore and that did not fix the problem.  Any thougths on a repair?   

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • I just tried updating to iTunes 10.7 on my pc and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll.  Any Ideas?

    I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll.  Them it tells me to re-install iTunes and the same thing happens again.  Any Ideas?

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

    Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Error message "The Printhead appears to be missing, not detected, or incorrectly installed"

    HP Officejet Pro 8600 e-All-in-One Printer - N911a
    I've had this printer for awhile and it has worked perfectly. 
    Just out of nowhere...
    I'm getting an error message that says "The Printhead appears to be missing, not detected, or incorrectly installed" . A short animation plays but i can't figure out what it's tell me to do.
    Please help!

    Hi @AjoyBrooks,
    Welcome to the HP Forums! 
    I see that you are getting the Error message, "The Printhead appears to be missing, not detected, or incorrectly installed." On your HP Officejet 8600. I am sorry that this has occured, but I am happy to help!
    Please take a look through this printhead guide. A 'Missing or Failed Printhead' Error Message Displays on the Printer after Installing a New Printhe....
    Hope this guide helps, and please let me know if you have any further issues!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

    After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
    == This happened ==
    Every time Firefox opened
    == I installed a new version ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

    If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
    It is possible that some files got broken with the latest update.

  • My problem is on my Windows PC.  I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I am told this is related to iTunes.  Any help?

    I use both a Mac and a PC.  My problem is on my Windows 7 PC.  I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I am told this is related to iTunes.  Any help out there?  Thanks

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • HT201210 Trying to restore ipod and keep on getting error message: the ipod software update server could not be contacted. the network connection was reset

    Hello can someone please help? Trying to restore ipod and I keep on getting error message: The IPod software update server could not be contacted. The network connection was reset. Make sure your network is active and try again.

    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Recently tried to update iTunes 12.0.1 and got this error message:  The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.

    I recently tried to update iTunes to 12.0.1 and got this error message:
    The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.
    After that, I get:  iTunes did not install properly.  Reinstall iTunes.
    I tried downloading iTunes again (without uninstalling it) and it won't download.
    Any suggestions?

    Thanks so very much, I have been looking for an answer to this for
    almost a week and just thought i'd look again and in 2 minutes my iTunes opened YIPPEE
    I must have installed deleted everything in order at least 15 times
    Is there anyways this cane get pinned to stay at top as it works and save people ploughing
    through post after post which is just asking the same question.
    Off to back up and I Cloud back up and see how it works without sidebar
    again thank you

  • I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

    I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

    Yes, the store didn't properly activate the card. If the store is nearly then you could try going back and asking them to do so, if it isn't (or if they can't/won't help) then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

    updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Still getting same error message. Can anyone help me

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Error message-- The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library C:\Program Files (x86)\iTunes\iTunes.dll

    Error message-- The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library C:\Program Files (x86)\iTunes\iTunes.dll

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • I need to update my Touch version 4.3.3, but I keep getting the error message "The iPod software update server could not be contacted".

    I need to updatw my Touch version 4.3.3, but keep getting the error message "The software update server could not be contacted".  It tells me to check the network settings but it looks like everything is ok.  What might I be missing?

    You need to be connected to iTunes on your computer which in turn needs to have an active Internet connection.
    See the chart below to determine whether you can upgrade your device and what you can upgrade to.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1
    iPhone 4                                      iOS 6.1
    iPhone 4S                                    iOS 6.1
    iPhone 5                                      iOS 6.1
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1
    iPod Touch 5                               iOS 6.1
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1
    iPad 3                                          iOS 6.1
    iPad 4                                          iOS 6.1
    iPad Mini                                     iOS 6.1
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

Maybe you are looking for

  • IOS4 crash while checking voicemail

    I'm using a 16GB iPhone 4 running iOS 4.0.2. On occasion after I receive a phonecall and I get an indication for voicemail, I'll start the phone app and switch to visual voicemail. When I press the voicemail to listen to it, the app crashes back to t

  • PDFs are not generated from Burst

    Hi all I am getting this error when i schedule my report to run: Document generation failed [INSTANCE_ID=V110APLFFC006.1305547398367] [OUTPUT_ID=1035][ReportProcessor]Error rendering documentoracle.xdo.servlet.scheduler.ProcessingException: [ReportPr

  • J2SE Plain Adapter - Continuous Operation

    Hi All, I would like to ask for your assistance in configuring the J2SE Plain Adapter Engine for continuous operation. This is the scenario: We currently have the db_receiver (jdb receiver) adapter up and running. The connection to the DB is ok and a

  • Reg:Check Printing

    HI All, how to configure Check printing in App Run. regards JK

  • Font too large when printing an incoming email

    I want to change the font size when printing out mail in my inbox.  The email font size is small and OK, but when I print the email, it's too large.  How to I change this?