Error message "This program cannot display the webpage when uploading images to Cafe Press
I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
Most likely causes:
• You are not connected to the Internet.
• The website is encountering problems.
• There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address."
I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
Server not found
Firefox can't find the server at members.cafepress.com.
* Check the address for typing errors such as
ww.example.com instead of
[url=http://www.example.com]www.example.com[/url]
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
Nancy
http://www.cafepress.com/calendarflr
Sounds like your desktop application is in fact running from
a server. CHMs were identified as a security risk by Microsoft and
are best suited to the user's PC.
Click
here for more information.
Similar Messages
-
"... cannot display the webpage" when trying to access SPO site from vm
Hi,
I'm using IE 8 on my dev enviroment (win server 2003). I can't access my spo site from IE, everything worked fine a while ago. Tried Chrome and it works fine, so it's just IE. I've cleared cookies/added site to trusted etc but nothing works.
Does anyone knows how to fix this?Hi Dangerrrr,
Have you made any changes before this issue?
What error message or error code do you receive?
Please take the following steps for troubleshooting:
1. Check the IE Add-ons. We could disable the Add-one temporarily and check if the issue still exists.
http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-8
2. Reset IE settings. For more information about reset IE, please refer to the following KB.
http://support2.microsoft.com/kb/923737
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Can I do this using a memory stick? If so, how?
Troubleshoot Internet Connection Problems at Microsoft.com
* http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-Internet-connection-problems
You can also check the following:
* Your modem and/or router are both on and are not indicating errors. The problem may be with your Internet Service Provider (ISP). Contact your ISP for more information.
* If you are using a wireless connection, that you are using the correct access point.
* Your Domain Name System (DNS) server translates web addresses (URLs) into IP addresses and is usually provided by your ISP. If the DNS server is overloaded, you may be unable to view some or all websites. For example, if http://74.125.53.99 or http://74.125.159.105 work but http://www.google.com doesn't, you may have a DNS problem. You can use an alternative service such as OpenDNS (http://www.opendns.com/) or Google Public DNS (http://code.google.com/speed/public-dns/).
* Whether your Internet security software (including firewalls, antivirus programs, anti-spyware programs, and more) is blocking connections to the Internet. For instructions on how to configure some programs, see the Firewalls article (https://support.mozilla.com/en-US/kb/Firewalls).
Check and tell if its working. -
Can I send you the jpeg of the message window, please? It's the best way I can describe it. There's a blue-coloured circular icon with a white "i" within the circle, but, as I said, no close button at any of the window corners
Hard restart.. While the phone is powered in, hold the power and home button. Hold them down and keep them held down. the phone will eventually shut itself off and reopen. keep held down till you see the appl elogo, then release. This will not delete anything off your phone, it will just force all apps to stop their current process. If you just turn the phone on and off, it will just pick up where it left off. Good luck
-
Internet Explorer7 cannot display the Webpage in forms 10.1.2.3
Hi all,
I have installed forms 10.1.2.0.2 to my laptop under Windows Vista Home Premium and followed the following steps :
1- changed virtual memory to (minimum of 2048 and maximum of 4096)
2- I updated forms 10.1.2.0.2 it to forms 10.1.3 using pathch 3 (patch ID 5983622)
3- I changed the application server Url in forms builder by choosing Edit, preferences, runtime and click on "Reset to default" button and added ?config=jpi at the end of the line.
when i run the form I got the message "Internet Explorer cannot display the Webpage"
when I called the link http://Computer_name:8889/forms/frmservlet?config=jpi
I got a message asking me to allow downloading java plug-in 1.4.2 ( which I know that it is not certified with Vista), So i refused downloading and updated the formsweb.cfg file as Steve Cosner said in his thread Vista Jinitiator problem
and added these new lines to the formsweb.cfg file:
[[jdk15]]
jpi_classid=clsid:CAFEEFAC-0015-0000-FFFF-ABCDEFFEDCBA
jpi_codebase=http://java.sun.com/update/1.5.0/jinstall-1_5_0_12-windows-i586.cab#Version=1,5,0,12
jpi_mimetype=application/x-java-applet;jpi-version=1.5.0_12
jpi_download_page=http://java.sun.com/javase/downloads/index_jdk5.jsp
baseHTML=basejpi.htm
baseHTMLjinitiator=basejpi.htm
baseHTMLjpi=basejpi.htm
baseHTMLie=basejpi.htm
When i run the form I got the same error message "internet Explorer cannot display the Webpage "
Again I called the link : http://Computer_name:8889/forms/frmservlet?config=jpi
then I got a message asking to allow loading and installing JRE 1.5.0_12 , and I allowed downloading and installation
After all of this, the form doesn't run and I get the same message "Internet Explorer cannot display the Webpage "
Is this a forms related problem or an Internet Explorer problem
Please help
Mostafa Abolaynain
Edited by: Mostafa Abolaynain on Jun 5, 2009 12:06 AMjemar98 wrote:
We have a custom application built alongside Oracle Ebusiness Suite 12.
Launch a form from the Menu Navigator
Click in any field in the form
Focus does not change to the field that was clicked
Focus can be retained by pressing any keyIs this issue with all custom forms or specific ones?
Did you use the TEMPLATE.fmb file when building your custom forms?
Can you find any errors in the JRE Console Window?
Please obtain the FRD log file and see if you can capture more details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Internet Explorer cannot display the webpage error urgent!
Hi,
I have created a OAF page. am displaying some report data in the page. The VO query is executing more thatn 20 min to get the records after tuning.
Now my problem is, am getting the error "Internet Explorer cannot display the webpage" in 10 mins after the VO query execution started. However, the DB session for this query is still executing at the backend and I am unable to get the same OAF page until the DB session completes.
Could you please help me in this?
Thanks,
Raja.Raja,
There are two options here :
1) The correct one is to go via concurrent program , because as per web standards a web page should not take max of 3-4 minutes to render.
2) If you still wanna go via your present approach, you need to set profile ICX:Session Timeout which specifies Maximum idle time for the Oracle Applications user session(specified in minutes).
--Mukul -
Reporting IAC - Internet Explorer cannot display the webpage error
Hello
We are working on ECC 6, EHP 3, MSS Reports using LaunchPad.
When we try to see the report results, it gives us following error at below URL:
http://domain.com:50000/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.sap.pct%2Fline_manager%2Fcom.sap.pct.erp.mss.bp_folder%2Fcom.sap.pct.erp.mss.roles%2Fcom.sap.pct.erp.mss.manager_self_service%2Fcom.sap.pct.mss.hcm.rpt.iac&ApplicationParameter=S%3DMSS0%26F%3D*HISRETQTA++5%26B%3D20100329%26E%3D20100329%26V%5B1%5D%3DMSS_RPT_SEL_PD1%26OV%3DMSS_RPT_SEL_PD%26R%3D4365AF4B40472508E10000000A000326&CurrentWindowId=WID1269788098656&NavMode=1
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
- I am connected to Net very well.
- Not sure abt website problems
- address shown in the address bar is mentioned above
Any idea what is wrong? We were earlier getting IAC exception, and added the permissions to overcome it.
Reagrds
YashHI Yash,
Please follow this link http://help.sap.com/saphelp_erp2004/helpdata/en/0c/c28c4024d26e1de10000000a1550b0/frameset.htm.
It will solve your problem. Also make sure that you will give READ access to the end user on this folder.
In case you are still facing with issue, do let us know.
Cheers,
AB -
Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.
Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox -
I attached multiples .pdf files to an email. Tried to attach the next file before the previous 1 finished attaching. Got error message "this "**" file cannot be attached until the files already attached are finished uploading". Was never able to attach that 1 file to the email that I received the error message for; was able to attach subsequent files to that same email & send it. Now, I often get the same error message, even if I only attach 1 file & esp. when attaching .ai or .jpeg files. What can I do to fix this problem?
It looks like nobody has an answer for this despite of the 80 something views!
And here i thought Adobe admin would be monitoring the forum, but surprisingly, they don't even have the answer for this!!! -
Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What is the issue, had this phone over a year??
I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck! -
I am trying to reinstall Windows (would not launch). I removed the partition and started over. I downloaded the support files and Windows 7 iso file to a USB drive. However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode." I was successful before, what am I doing wrong this time?
Try a restart.
If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac -
Error message:This IPHONE cannot be used because the Apple Mobile Device service is not started. It is a 3GS version 4.3.5 (8L1). I had upgraded my ITUNES and after two attempts to update to IOS 5 (it timed out each time), I am now getting the message above. everything seems to be working. I have rebooted both computer and IPHONE. I am have had for couple of years. Anyone have other tips or ideas?
There are instructions on this page for how to start it and how to set it to start automatically : http://support.apple.com/kb/TS1567
-
With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?
Numbers 3.x can only open Numbers '09 and later. You will need Numbers '09 to open Numbers '08 files.
If it is a single file (or only a few) you can email me and I will open and convert then email back. My email address is in the "Biography" of my profile.
You may have Numbers '09 installed. Look in the folder "/Applications/iWork '09" if Numbers is in that folder launch it, open the file you tried to open, and save. Then you should be able to open in Numbers 3.x -
ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???
Jennifer...
Follow the instructions here > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
Error message this itouch cannot be used because the apple mobile device service is not started
Went to sync my itouch and got the error message: This itouch cannot be used because the apple mobile device sevice is not started. This has never happened before. I have deleted my itouch, but could not restore since it is no longer being recongnized in itunes. What can I do to fix this?
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Maybe you are looking for
-
Smartview 11.1.2 "Hyperion" tab disappeared from his Excel 2010.
My user's Smartview 11.1.2 "Hyperion" tab disappeared from his Excel 2010. Trust Center shows that Add-In's are not disabled. We reinstalled and installed SV but nothing worked. What can we run to register SV to his Excel 2007? His Excel 2010 does ha
-
My appointments changed from 11:00 to 10:00, how can this be?
hi guys, I have an problem with my Iphone 3gs. What happened is that the time changed from summertime (DST) to wintertime, but so did my appointments. So when I got a appointment at 11:00, now it says; 10:00. This is not what I had in mind. Can someb
-
How do I know if security hotfix APSB13-13 has been applied? My version is 9.0.1.274733
-
Non-leafNode in a JTree to be loaded on expansion
I have a non-leaf DefaultMutableTreeNode going into a JTree, that I want to "load on demand" when the user expands it, with a TreeWillExpandListener. I've done "load-on-demand" nodes before, and I think the way I did it before involved having a dummy
-
Release Status is different in CL24N and table KSSK
Hello All, For a Release strategy in the transaction code CL24N i see it is in status 3 - incomplete. However if i go to table KSSK, i see it in status 5. Can you please explain, why in table KSSK, it is showin as status 5 and what does status 5 mean