Error message "unable to acesses IXP213.tmp" when installing itunes

I have windows XP and whenever i try to upgrade, install or uninstall itunes i get teh error message,
"Unable to accesses file
C:\DOCUME~1\user\LOCALS~1\Temp\IXP213.TMP\
please confirm that registry exists or select an alternate route."
I've tried all the methods that i could find on the boards and in the trouble shooting page but none of them have worked. Got any ideas on how to correct the problem?

Doublechecking something. When you attempt to clear the TEMP directory, as per the instructions in the following document:
Trouble installing iTunes or QuickTime software in Windows
... does Windows allow you to do the deletion? or does it refuse to delete that file?

Similar Messages

  • TS4268 What does it mean when I get the error message, "unable to contact iMessage center" when trying to set up iMessages and I click next and it starts verifying and then the error message.

    What does it mean when I get the error message, "unable to contact iMessage server" when I try to use iMessage and after it starts verifying?

    iOS: Troubleshooting FaceTime and iMessage activation
    Apple is not reporting any problem
    http://www.apple.com/support/systemstatus/

  • Getting error message 'unable to connect to server' when trying to access iCloud

    Trying to access my iCloud account but keep getting error message 'unable to connect to server'. Need help please.

    Welcome to the Apple Community.
    Try the following.
    Go to Settings > iCloud > Delete Account (This removes your data from your device, but not from your account, it will be added back later).
    Restart the device.
    Sign in again (Settings > iCloud, don't use the 'Create New Apple ID' button).

  • Error Message...Invalid Drive E when loading ITunes

    I have tried to download ITunes for 3 days straight, I keep getting an error message that I have an invalid Drive E. I have done disk clean up, defrag, cleaned out cookies and temp files, what else can I do? Does anyone else get this message? I am dying to use my new phone but I can not unlock or register it.

    Bissley,
    I have received this error in the past and it is usually caused by Windows automatically changing your external drive letters when you install. There are two ways around it; first, follow the directions provided by b noir. Second, within iTunes go to Edit > Preferences > Advanced
    Under the advanced options you'll see a recessed section called "iTunes Media folder location". Although you may have set this in the past it, if Windows changed your drive letters it will no longer be valid. Default is usually "C:\blah\blah\mymusic"
    Changing it just a matter of clicking "change" and finding your music folder again or change your drive letter back (if it changed at all).
    If Windows is changing your drive letters, it is best to set them yourself so that everytime you plug in the devices they use the letter you assigned. Here is a link for that process:
    http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-le tter
    Hope it helps.

  • Error message -"No disk please insert" appears when accessing itunes

    This error message only goes away when making dozens of attempts to closes or cancel via task manager. Once it goes away I have full access to itunes. The message appears only when starting iTunes and then again when connecting the iPod (when the iPod accesses iTunes)
    to try to correct this problems I have
    1. searched for viruses
    2. updated my CD/DVD-rom audio driver
    3. uploaded and installed the 1.2 version of iPod
    4. uninstalled and reinstalled the latest version of iTunes
    5. reset my iPod to factory setting
    Any other suggestions. Very frustrated. Just getting hooked on the iPod, but with this error message- I cannot even charge the iPod as it blocks the whole process.
    30g video iPod   Windows XP  

    David LB,
    This can happen if a memory card reader is confused
    by Windows with the iPod.
    This article offers some suggestions on resolving the
    issue:
    http://docs.info.apple.com/article.html?artnum=93499
    Thanks for the suggestion. It didn't work at first. Then I shut down and restarted the computer and the error message did not occur, but just accessed itunes and the error message popped up again. This is really annoying. Any other suggestions?
      Windows XP  

  • Help!!!....Getting error message"unable to load CTCabEx.dll" when trying to install...

    new drivers for extreme music. Tried 3 or 4 times. Any ideas or suggestions would be appreciated. thanksMessage Edited by Canadianguy on 2-03-20070:54 PM

    Hi,
    Try <fx:Script source="scripts/generic.as" />
    Best,

  • Error message: Quicktime version 7.1.3 is installed, iTunes requires v. 7.5

    So yeah, I plugged in my iPhone into my new computer that I just built for the first time, and I got this error. iTunes was working fine 2 hours before this. I have Quicktime v. 7.5.5 installed, and just downloaded iTunes yesterday. I tried reinstalling, same message. What gives?

    Try removing QUicktime using the method for Quicktime in this article:
    http://support.apple.com/kb/HT1923
    Then download and install the version of Quicktime that does not include iTunes (the second option):
    http://www.apple.com/quicktime/download/win.html

  • Windows 7 error when installing iTunes 'Could not access network location %APPDATA%'

    This error message pops up everytime i try to install iTunes on my PC.  I am trying to run the 64-bit version and have also tried fixit application, bu the problem persists.  How can I solve this error message?

    Try disabling anti virus software and turning off the Firewall
    Disable antivirus software
    Turn-Windows-Firewall-on-or-off

  • Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

    I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web.  Which is currently unavailable and doesn't work.
    Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
    Has anyone else had this same problem, and if so, how do we fix it....???  My next move is a phone call, but those haven't always been very productive.
    If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
    Thanks in advance.
    Karen

    Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain.  Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech.  They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....  
    Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method. 
    I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
    Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered. 
    I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text.  The way my luck runs, they won't offer one for a decent price.  The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.  

  • HT3275 I continue to get the following error message: Unable to complete back up.an error occurred while creating backup folder. It's a brand new drive. When I attempt to repair it using disk utility I get:unable to repair disk cannot unmounted

    I have been trying to use time machine on a new lacie 2tb usb 2 drive for back up. I continue to get: "unable to complete backup.An error occured while creating backup folder". When I use disk utility to repair I get another error message: unable to repair disk unmountable.
    Help me Obie One Canobie you are my last hope

    I have confused myself with the facts!  Started out keeping track of every step and every variable but have sort of lost it as we progress here.  First I quit all applications then swapped connections between mouse port and backup disk port to influence possible bad connections question.  Changed power outlet receptacle for the backup disk. Disabled the put-the-HD-to-sleep option.  Then powered down the computerator.
    Next started up computerator.  Turned Time Machine ON  and experienced multiple successful backups!  Then I started up a few applications, Mail and Text Edit (but not Safari so far).  Had a few more successes.  After each backup, I used Disk Utility to verify the backup disk is still OK.  This because the error about unable to unmount the backup disk seems to go hand in hand with Disk Utility finding the backup disk to be bad.
    Put computer to sleep for the night.  Upon starting up in the morning, and before doing anything else, I did a backup disk verification... BAD!   Did a restart and verified the backup disk... OK.
    Did a few    Sleep-bad, Restart -OK    repetitions.
    It seems consistent:  Sleeping the computer apparently messes up the backup disk but doing a Restart "repairs" it.
    =============================
    Now then, I don't understand everything I know here.  Methinks that maybe keeping the HD from sleeping during lulls in activity has allowed successful backups through the day but manually putting everything to sleep for the night causes a return to the problem of spinning-back-up-too-slowly (which was explained earlier).  Is there any truth in this?
    I may abandon this Seagate thing for something more compatible.  What's out there that we know works reliably for us?

  • Since upgrading to FF 4, I have constant crashes (updating graphics drivers did not help). now all my bookmarks are gone. When I try to restore them, I get error message: "Unable to process the backup file".

    Since I "upgraded" to FF 4, I have constant crashes (I tried updating my graphics drivers--it did not help) and now all of my bookmarks have disappeared. When I try to restore them, I get this error message "Unable to process the backup file". I have lost years of bookmarks...please help.
    I am using Windows XP, SP 3 if that matters.

    I am also unable to restore any of the backups of the bookmarks, both automatic backups and two backups that I created manually. Since I was able to restore backups before, and since no changes have occurred to these backup files, the problem must be with Firefox.
    Right before my bookmarks disappeared, FF crashed and I accidentally started FF 3.5. When I saw what I did, I ended the Firefox process and started FF 4. That's when all my bookmarks were gone and I discovered I couldn't retrieve any backups. I did note that an add-on was updated when I restarted FF. Maybe that's the problem. Does FF have a Safe mode?

  • HT4623 Getting the error message "Unable to Install Update" when trying to install IOS update

    Getting the error message "Unable to Install Update" when trying to install IOS update

    Restore teh device.

  • HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

    Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

    When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • When installing itunes on my windows XP I get an error message "Service Apple Mobile Device"

    When installing iTunes on my Windows XP I get an error message "Service Apple Mobile Device (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services".  I don't know what this means and I do not know how to resolve it.  Can you advise please?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
    iTunes 11.1.4 for Windows- Tips for Unable to install or open

Maybe you are looking for