Error message using norton systemworks one button scan or windoctor scan

get registry error message saying "CLSID\{4C904448-74A9-11dO-AFGE-00C04FD8DC)2}\InprocServer32" cannot find a missing file "C:\ProgramFile\Adobe\Acrobat7.0|Reader\AcroRdlf.d11" ... I had upgraded to Reader 8.1.2 from Reader 7.0 and now get this message ... I also get 2 missing file notices that say "C:\Program Files\Adobe\Reader 8.0\Reader\AcroRd32.exe" cannot access a necessary file and then 2 files are listed "msvcp80.dll" and "msvcr80.dll" ... of course, Acrobat company is useless and provide zero support for their own product ... I have already uninstalled Reader 8.1.2 and reinstalled it and that did not help at all.

That is a bug norton systemworks.

Similar Messages

I am trying to download the latest version of iTunes to my PC (windows XP) and I keep getting an error message or two. One is that it can't uninstall the previous itunes version, the other is that it can't find itunes.msi.

I am trying to download the latest version of iTunes to my PC (windows XP) and I keep getting an error message or two. One is that it can't uninstall the previous itunes version, the other is that it can't find itunes.msi. I have tried removing the old version in add/remove programs, but it says the same error. I tried deleting every thing that has itunes in the file/folder/etc and it didn't help.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Why am i receiving an error message similar to this one when trying to download firefox?: "unable to open this internent site. The requested site is either unavailable or can not be found"

I just received my acer aspire 1 netbook and i wanted to download firefox. I have used firefox before on my acer laptop but for some reason when I try to download it now i receive an error message similar to this one: :"unable to open this internent site. The requested site is either unavailable or can not be found" I tried downloading versions 3.6 and 4 beta and received the same message.

That is OK.<br />
It is one of the mirror servers that Mozilla uses
http://www.mozilla.org/community/mirrors.html (The SUNET Archive (se))

HT5361 When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose " button is gone. What have I done wrong?

When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose " button is gone. What have I done wrong?

Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
Karen

To display a continuos Error Message using BADI

Hi Everybody,
                    There's a transaction that makes use of classes and interfaces to display an ALV grid with input enabled frames and fields. There's a need to display an error message using a specified BADI method, which gets triggered after the user enters the input. The error message is working fine for the first time.<b>But when i'm trying to enter the same input and press enter after the error message, the transaction is getting closed. How can i display the same error message, until and unless the user enters the correct input ?</b> I've tried to trace the control using the debugger after the enter is pressed, but the debugger is also getting closed and the control is coming out of the transaction. Help me out in displaying the error message.

Hi,
Open the interface and go to the Methods tab.
Select the Method and click on Parameters.
In the method parameters, declare a variable
RETURN      Changing      Type     ALM_ME_BAPIRET2_T.
Now, inside your code, declare   DATA : ls_return TYPE bapiret2.
and populate this RETURN table, something like:
        if not ( wa_mara-mtart eq 'SPAR' or wa_mara-mtart eq 'ZMRO' ).
    CLEAR ls_return.
    MOVE 'E' TO ls_return-type.
    MOVE 'ERR_MESSAGE' TO ls_return-id.
    MOVE '999' TO ls_return-number.
    MOVE 'Enter proper error message here' TO ls_return-message.
    INSERT ls_return INTO TABLE return.
    endif.
Then, back in your program, check if this table is empty proceed otherwise, STOP or EXIT.
Regards
Subramanian

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

Getting Error Message using Formatted Search

Hi,
I am using formatted search for validating a particular field, and that happens fine. Kindly let me know if I can also display error messages using the same formatted search.
If yes, what am I to include in the formatted search, and if No, please let me know the alternative.
Thanks in advance.
Satish.

Hi Satish,
if you validate the value of a field and intend to rise an error message on detection of invalid values in a separate window or in the status line there is no way to do it with Formatted Searches (as far as I know)!
You could use the following methods as simple workarounds if you don't want to program a solution with the SDK:
1. Solution
You can display the text of an error message in the field you validate; of course, the invalid data then is overwritten with your error message, but you could construct the message from fixed text parts concatenated with the data found in the field.
Be sure to save the original data of the field in your query before you do anything else. This way you sustain the field data in case the data is valid!
Example:
DECLARE @save AS ....
SET @save = $[xxxxx]
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
ELSE
SELECT $[xxxxx] -- no error - sustain valid data
END
2. Solution:
You define a sepate User Defined Field (UDF) for potential error messages - that's the way I often programmed it for our own applications. Suppose that the Formatted Search is connected to this UDF and the field to validate is field 'xxxxx'. The Formatted Search is triggered (auto-refresh) on change of field 'xxxxx':
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
END
May be that there are minor syntactical errors or missing type conversions in the code above - but I hope it gives you an idea on how to solve your problem without SDK programming!
Good luck!
Frank Romeni

Showing error messages on click of Save button only

Hi,
Generally SAP web client GUI is showing the error message on pressing of Enter button (or) picking up any data field and stepping out of it. We want to show error messages for mandatory fields only when user clicks on Save. How can this be done in SAP web client GUI?
Regards
--Hari

Hi Hari,
If you want to raise an error message on save. Try this.
method eh_onsave
DATA: lr_msg_service    TYPE REF TO cl_bsp_wd_message_service.
DATA: ls_msg_no TYPE symsgno.
if ( condition failed)
lr_msg_service = me->view_manager->get_message_service( ).
    lr_msg_service->add_message(
    iv_msg_type       = 'E'
    iv_msg_id         = 'Z_MSG_CLASS'
    iv_msg_number     = ls_msg_no ).
exit the method once the error message is raised
exit
endif.
end method.
Note : specify the message class and message number in the add_message menthod.
Hope this was helpful.
Best Regards,
Lakshminarayana

How to show error message using java.awt?

How to show error message using java.awt?
Which is the class corresponding to the JOptionPane?
Or I need to use Frame ?

No, JOptionPane is swing!
You would have to create your own frame, put your message in it, then show it.

HP Scan error message using HP C7280 All in one Printer

I have been scanning documents successfully until recently. I am using a Mac with OS X 10.7.5 and receive the following error when using HP Scan.
The scan cannot be performed because another program has control of the HP imaging device. Try the following steps. After each step, try scanning again.
- Restart the program.
- Close all programs that may be using the device.
- Reboot the computer.
I've tried downloading multiple drivers with no success.
Any help would be greatly appreciated.
This question was solved.
View Solution.

Hello @kellycc,
Welcome to the HP Support Forums! I see when you try to scan with your HP Photosmart C7280 with your Mac running the 10.7 Operating system you get an error 'The scan cannot be performed because another program has control of the HP imaging device. Try the following steps. After each step, try scanning again.'.
Please complete the steps listed below:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you will need to install the print driver using the Apple Updates. Click on the link below and follow the on screen instructions:
Installing Your HP Printer Driver and Software for Mac OS X
I hope this helps, please let me know the outcome!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Error message using still in menu: your project is using more than1 gb of motioncontent

tocAfter making several discs in Encore CS4 I now get the message:
Building project failed.
The project contains more than 1 GB of motioncontent. The limit is 1 GB. You must reduce the total duration of the motion menu to make them fit on the disc.
Little confused, because I use a still, there no loops and the project is 2.65 gb. There no loops is motion
In the asset I've placed the avi and in the link the timeline. I did that before with film that was about 9 minutes.
Maybe there I'm making a mistake, but Idon't know it anymore.
Please help
JosZon

That is not the problem. That was clear to me. When I use one menu with music and one button, I have that problem
If all of your Menus and their Assets (any video and/or audio) use more than 1GB of space, then you must cut back on something in the Menus. If you have included a long AV file, for instance, then you will want to go back to your NLE and shorten it. About 40 sec. of Duration would be a good place to start. If your music is a large, long file, then you need to shorten its Duration.
As per the DVD-specs. ALL Menu Assets may not be larger than 1GB. If you are getting this error, then you have more than 1GB of Menus and their Assets.
Good luck,
Hunt

Equium A60: I get error message using explorer.exe

Everytime I try to open an image file using Paint or Fax/Image viewer, or I try to drag a file into a folder I get the following error message:
"Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience"
The error report says:
"AppName: explorer.exe AppVer: 6.0.2900.2180 ModName: rpcrt4.dll
ModVer: 5.1.2600.2180 Offset: 000847a6"
Also I cannot open webpages that open in new IE windows. Norton Internet Security 2005 also would not open, but did claim to be active in the background.
Does anyone have any advice for me?
I've tried all the help for explorer.exe problems on helpwithwindows.com but nothing they suggested worked - such as spyware, malaware removal. I've run a few online virus checks - since Norton won't work I had to try the online scans.
The laptop was bought last year, and we've lost the recovery CDs - so if we need them, then where can we get replacements?
Many thanks,
Jonathan

Hi
Well, this sound like a OS software malfunction. It's possible that some registry entries or/and data files are corrupted and damage.
However, the best solution is to recover the OS.
The other possibility is to use the "system restore" tool of Win XP.
Then you can try to roll back the OS to the early point. But if it doesnt work so the new installation is needed.
regards

Error message using compressor

When I hit the "submit" button after adding settings to a video I want to export, the message, "Unable to submit to queue. Please restart your computer or verify your Compressor installation is correct."
Why would I get this message. Is there a simple way to fix it so I can use Compressor?

Hi Thot, just trawling these forums looking for some info.. I noticed this.... yeah the QT error -50 comes up.. cant find a specific reason. I had this has with a job I submitted via FCPX ti Compressor.app via "send to compressor". I recall a thread somewhere in these forums that this error was a result of genuine Quicktime error whilst performing work on one or more effects in FCPX.
So I simply went in and redid the effects in FCPs. It was something simple like a cross dissolves.
In any case if you are gettingt this error from a comperssor submittion of SHARE from FCPX and you see it in compressor., it might be worth do a trial and error on your FCPX storyline.
Simply make a few test projects and try to narrow down withe effect is causing this issue.
worth a look
w
Hong Kong

Why do I receive "4.3.2 connection rate limit exceeded" error message using the mail merge extension and what can be done about it?

I am using TB 31.3.0 with Mail Merge 3.9.1. I routinely send an email to 435 members of an volunteer emergency responders group that I coordinate. I do so using a .csv list with mail merge. While there were no problems in the past, more recently the mail merge function will hang after sending a varied number of messages successfully and I get the following error message:
"An error occurred sending mail. The mail server sent an incorrect greeting: 4.3.2 connection rate exceeded.."
There is an "OK" button in the error message pop up that can be clicked to resume the mail merge process. It would appear that if I click the "OK" button immediately whenever the error message is received I must do so frequently and some members do not receive their email. If I delay clicking the "OK" button, I found that I only needed to click the "OK" button twice to send to all the members.
An on line search suggests this is the result of some sort of throttling by my ISP, Sonic.net. There is also this comment: "If you are receiving this error, you are likely using mailing list software which cannot decipher the temporary fail codes. If so, you will need to set your software to slow down its delivery rate and/or reduce the number of active connections per remote host."
I am not super technical. Is it realistic to think that I can tweak mail merge to that I do not have to babysit my email to this group?

then I suggest you send using a mail provider that is not actively trying to block your outgoing mail. Or use a yahoo / google groups mailing list feature so you only send a single mail.
Or use a free account from the likes of http://www.ymlp.com/ who limit free account mailing lists to 1000 subscribers. ( Googled them this morning)

Error message in case of One time vendor in MIR7 and MIR4.

Hi,
We have a requirement where we need to give a warning message when an invoice document is parked in case if it is a One time vendor and bank details are missing. It should be an error message if user is trying to save it as completed or posting the document. We have already found a BADI INVOICE_UPDATE method CHANGE_AT_SAVE for giving error / warning message but we also want the same to be appeared in the popup coming when we press Messages button in MIR4 screen same way as standard messages are shown. I know that there is a table T_ERRPROT which need to be populated in order to show the messages in the popup window but could not find any appropriate user exit or badi to populate this table. Any suggestion or solutions are welcomed.
Thanks and Regards,
Jaideep,

Hi,
in badi HEADERDATA_CHECK you have available as input parameter I_RBKPV.
do something like:
* If there is any error do not allow posting
    DATA: gt_errtab    TYPE TABLE OF mrm_errprot,
          gs_errtab    TYPE mrm_errprot.
    CONSTANTS:     c_errprot(23)   TYPE c VALUE '(SAPLMRMF)TAB_ERRPROT[]'.
    FIELD-SYMBOLS: <fs_errprotj_dt> TYPE table.
    ASSIGN (c_errprot) TO <fs_errprotj_dt>.
    REFRESH gt_errtab[].
    gt_errtab[] = <fs_errprotj_dt>[].
    DATA: c_okqx(17)   TYPE c VALUE '(SAPLMR1M)OK-CODE'.
    FIELD-SYMBOLS: <fs_okqx> TYPE ANY.
    ASSIGN (c_okqx) TO <fs_okqx>.
    IF NOT gt_errtab[] IS INITIAL.
      READ TABLE gt_errtab INTO gs_errtab WITH KEY msgty = 'E'.
      IF sy-subrc = 0.
        CASE <fs_okqx>.
          WHEN 'BU'. "POST
* This is optional: you can either search for a particular message or
* do not allow any error message
* Here search for the message triggered in badi INVOICE UPDATE
            READ TABLE gt_errtab INTO gs_errtab WITH KEY msgty = 'E'
            msgid = 'ZXX' msgno = '030'.
            IF sy-subrc = 0.
              CLEAR <fs_okqx>.
              MESSAGE s030(zxx). "While errors exist document will not be posted
            ENDIF.
        ENDCASE.
      ENDIF.
ELSE. "THIS IS THE NEW PART
   IF i_rbkpv-YOURBANKFIELD IS INITIAL. "This is the New part
        CASE <fs_okqx>.
          WHEN 'BU'. "POST
              CLEAR <fs_okqx>.
              MESSAGE s031(zxx). "Please fill in bank details
        ENDCASE.
   ENDIF.
ENDIF.
Best regards.
Edited by: Pablo Casamayor on Jun 2, 2009 6:39 PM

Error message using norton systemworks one button scan or windoctor scan

Similar Messages

Maybe you are looking for