Error message when burning discs

I can't burn a disc from my playlists. I have the newest version of iTunes but I do not have the burn icon at the top of the page. The only way I can initialize a burn is to right-click the playlist and select "burn playlist to disc". The burn begins properly but somewhere before it is finished it cancels itself and gives me the following message : Unable to burn disc. An unknown error occurred (4251). Any suggestions?

I HAD THE SAME PROBLEM, I GOT THE ERROR 4251, WHAT ID DID WAS TO SELECT A SLOWER BURNING SPEED, I SELECTED 4X, AND IT WORKED FINE, THE CD'S I AM USING ARE MEMEOREX CD-RW 12X, TRY IT AND LET ME KNOW IF IT WORKS.

Similar Messages

  • Error message when burning discs on a MacBook and MacPro Desktop

    I have encountered a problem burning a CD-R with the MacBook. I created 12 image files (JPEG) totaling 48 MB. I placed them in a Burn Folder and tried to burn them to a CD-R. I recevied the following error message "Burning the disc failed because an unexpected error occurred (error Code 0x80020000). The same problem occurred on my MacPro desktop. I spoke with an Apple technician. She had me reset the hardware on my desktop. When that did not work she told me the disk was bad. I tried a different brand of CD-R and a DVD disk with the same results. She suggested that I reinstall the operating system. Since it happened on both of my Apple computers it seems to me that the problem is related to a software bug, since it is unlikely that both machines went bad at the same time. The MacBook is only 3 months old and the MacPro desktop a little over a year old. Today I discovered that the desktop would burn a CD-R if I had only one image file in the Burn folder. Has anyone run into this problem? Does anyone have a solution?

    Thank you for your reply. I have some additional information that may help you. I initially found that if I tried to burn 12 JPEG image files to a CD-R I received the error message I reported in my first post. If, however, I only tried to burn 3 files to the CD-R, they were burned onto the CD and I was able to retrieve them. If I tried to burn more than 3 files it did not work.
    I took my MacBook to the Apple store Genius counter yesterday to get some help and was able to exactly reproduce the errors. The Apple techs suggested replacing the CD/DVD drive. I am waiting for the new drive to arrive. In the mean time, I discovered that if I included any number of files and sub-folders in a single main folder, and then tried to burn that main folder it worked. I was subsequently able to successfully burn a single folder containing 300MB of files and sub-folders. This seems to me to be a bug in the Mac OS, especially since it happened in exactly the same way on 2 different late model Macs. Hope this helps. Let me know if you can reproduce my experience or have any additiona information.

  • Error message when burning a disc of photos

    I was trying to burn a disc of a large number of photos - around 400, and I got this error message:  "The burn to the HL-DT-ST DVDRW GS23N drive failed. The disc drive didn’t respond properly and can’t recover or retry."  I did a sample burn of about 5 or 6 photos and it worked fine, but this large project failed.  I have a total of 1200 pictures I'm trying to burn.  Any advice?  Thanks for your help.  I have spent hours trying to get this project done.  It looks like it is in the "preparing to burn" stage for 10 or so minutes, then when it gets ready to burn, I get the failure message.  Thanks again!

    Take your choice:
    Bad discs
    Dust bunnies in drive blocking laser
    Drive failing
    Crashed/corrupt firmware controlling drive
    Crashed system component
    Try different brand of discs and/or slower burn speed
    You don't say anything about your model computer.  With some you can reset software.  Of course sometimes restarting a computer can help.
    Intel-based Macs: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/ht3964 Apple Portables: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/HT1411 Apple Computers: Troubleshooting the slot-loading SuperDrive - http://support.apple.com/kb/HT2801
    Failing all those it is not uncommon for optical drives to need replacing every 5 years or so.

  • How do I deal with this error message when burning DVD's: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?

    First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.

  • Error message when burning Home Folder backup disk

    I got this error message when trying to burn a backup disk (cd-rw) of my Home Folder. Could somebody please help me figure out what this means? -
    The operation cannot be completed because one or more required items cannot be found.
    (Error code -43)
    Could not open the data fork of "<unable to get file path>" (-43).
    Any help would be greatly appreciated.
    iMac Intel Core Duo   Mac OS X (10.4.4)  
    iMac Intel Core Duo   Mac OS X (10.4.4)  

    There are a bunch of folders within your home folder, you may want to decide what exactly you want to back up or not.
    Besides your personal folders (Desktop, Documents, Movies, Music, Pictures), you may want to decide whether you need to back up the library folder. The library folder generally contains preferences for most of your applications, and also caches and applications support files. These can become really big in some cases (Mine is more than 8GB, will not fit on a dual layer DVD). And the Library>Caches folder contains temporary files that will change from time to time, this might be the cause of your previous error since the shortcut is no longer valid.
    Once you chose your files and make sure they will fit on your blank CD/DVD, you can just do what you did before, drag the folders to a Burn folder, make sure you are not running any other apps, so they won't be modifying the files.
    There are programs you can use to backup to CD/DVD, Disc burner like Toast will span across several discs if the data does not fit on one. For a more automated solution, Carbon Copy Cloner (http://www.bombich.com/software/ccc.html) can backup to disc images which you can then burn to discs. I personally don't know a lot backup programs that provide good support for CD/DVDs, so I'll leave this to other folks.
    If you are going to backup regularly, I would recommend spending some money on an external drive. You can find quite a few free software for automated backup and saves money and time on burning CD/DVDs. Plus you have the advantage of being able to boot from the external drive should anything bad happened to your internal one.

  • Getting error message when burning DVD

    I keep getting an error message when I try to burn my DVD in iDVD 08. I have imported the movie in quicktime format from iMovie HD and everything works fine until I go to burn the project. I renders everything else but when it get to the movie it has an error and cancels the burn.

    Suggestion: Not a bad idea to test the disc image with apple's dvd player app prior to burning.
    Click Here
    I prefer to use Toast for burning an image to Dvd-R (verbatim at 4x or slower for best results).
    Click Here
    Not my personal favorite choice ... however it is possible to burn thru apple's disc utility like this:
    Click Here:
    Hope these help but if not just come on back.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

  • Error messages when burning to discs.

    I have one of the original Macminis with only 256 Mb Ram, running 10.4.11 and have been very content with it until recently. When trying to burn Slideshows to disc from iDVD, or backing up to disc from iTunes or iPhoto I find it commences the operation, then ejects the disc with the following message "Burn Failed. The burn to the Matshita DVD-R Uj-835F drive failed. The device failed to calibrate the laser power level for this media." Instinctively I feel this means that the laser in the Superdrive is kaput. Is this a correct assumption, and is there anything I can do about it without sending off the Service Centres?
    Grateful for all help.

    The first possibility to consider before a serious hardware failure in the drive is that the lens in dirty - this can create the error message you see. Given the mini seems a little prone to the ingress of small particles of debris I would therefore suggest you try an inexpensive lens cleaner.
    If it turns out the drive truly is defective, my recommendation would not be to send it off for repair, but simply replace the drive with a Firewire external DVD burner. That would generally be of very similar cost (or actually less) than a repair, but provide you with a higher performance unit which is less fussy on media.

  • Error message when burning dvd

    I have a flat panel 17" iMac with a superdrive. I have recently tried to back-up data onto a dvd. When I hit the burn button I soon get an error message. When I eject the dvd and put it back in to play nothing happens and the dvd is ejected only when I open iTunes. On a third and forth attempt the dvd gets spit out without any burn attempt.
    Strangely, the first dvd I put in that was not readable on my machine I put in a Windows machine, which appears to read the dvd and I see the folders that I tried to burn, but obviously cannot open the files because it is a Windows machine.
    I have read the discussions and dvd issues seem to be rife. I thought I had applecare but it appears it hasn't been registered and this issue is being addressed with apple. So I have not managed as yet to get any apple support.
    Can anyone shed any light on my problem?
    Thanks
    PS: The reason for the back-ups is that I am soon going to upgrade to Tiger. I see from discussions that issues about dvds are rife.

    I didn't note the message I'm afraid. However I have just tried to burn a dvd again and got the message 'An error occurred while burning the disc. This disc cannot be used.' I have tried the burn with two different dvds and I don't think the discs are the wrong ones. One was DVD-RW and the other was DVD-R. I recall that on another occasion there was an error number, which might have been 303, but I can't be sure of that figure.
    Whilst on burning to disc, I want to make an image of a folder. I follow the instructions of navigating to the folder and click on it but the resulting image is only of the folder and not its contents. Am I doing something wrong here too?
    Thanks.

  • Error message when burning HD with iDVD

    When i try to burn a HD movie directly from iMovieHD( v. 5,02) with iDVD( v. 5.0.1), i get an error message code OX8002006D, followed by another:
    "Burning Finished.---errors were found during burning process."
    and "there was a problem during multiplexing/burning"
    and the disk is ejected blank.
    With a Standard Definition movie, using the same DVD-R or DVD+R disks(4X) and same procedure, i have no problem. The movie was only about 2 minutes long with about 19 GB available.
    Anybody out there who knows what's wrong?
    Hans

    There are a bunch of folders within your home folder, you may want to decide what exactly you want to back up or not.
    Besides your personal folders (Desktop, Documents, Movies, Music, Pictures), you may want to decide whether you need to back up the library folder. The library folder generally contains preferences for most of your applications, and also caches and applications support files. These can become really big in some cases (Mine is more than 8GB, will not fit on a dual layer DVD). And the Library>Caches folder contains temporary files that will change from time to time, this might be the cause of your previous error since the shortcut is no longer valid.
    Once you chose your files and make sure they will fit on your blank CD/DVD, you can just do what you did before, drag the folders to a Burn folder, make sure you are not running any other apps, so they won't be modifying the files.
    There are programs you can use to backup to CD/DVD, Disc burner like Toast will span across several discs if the data does not fit on one. For a more automated solution, Carbon Copy Cloner (http://www.bombich.com/software/ccc.html) can backup to disc images which you can then burn to discs. I personally don't know a lot backup programs that provide good support for CD/DVDs, so I'll leave this to other folks.
    If you are going to backup regularly, I would recommend spending some money on an external drive. You can find quite a few free software for automated backup and saves money and time on burning CD/DVDs. Plus you have the advantage of being able to boot from the external drive should anything bad happened to your internal one.

  • Error 4900 When burning discs PLEASE HELP ME !!!

    When i try burning a disc from itunes, after about a minute of doing stuff the disc ejects and i get a message saying there was an error burning the disc (4900)
    This has only started happening the past couple of weeks, before that i never had any trouble burning discs from itunes atall.
    It is very frustrating as i havent a clue what it means or what to do about it, can anyone help me fix it???
    Please!!!!!!!!!!!!!!!!!

    I just ran the diagnostics test and this is the results
    Microsoft Windows Vista Home Edition Service Pack 1 (Build 6001)
    Acer Aspire 5520
    iTunes 8.0.1.11
    QuickTime 7.5.5
    FairPlay 1.0.15
    CD Driver 2.0.7.5
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.1.1.13
    Bonjour 1.0.5.11 (118.5)
    iTunes Serial Number 25042FB61CBEED6A
    Current user is not an administrator.
    The current local date and time is 2008-10-04 17:29:33.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA, NVIDIA GeForce 7000M / nForce 610M
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {FB97CCED-8C3D-4788-9FD1-7EDF228EAD8D}
    Description: Broadcom 802.11g Network Adapter
    IP Address: 192.168.1.2
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Sat Oct 04 17:05:55 2008
    Lease Expires: Sun Oct 05 17:05:55 2008
    DNS Servers: 192.168.1.1
    192.168.1.1
    Adapter Name: {4A66390C-37F1-4179-AF6D-56BE200D52CB}
    Description: NVIDIA nForce Networking Controller
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2008-09-26 09:39:17.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: NTIDrvr (1.0.0.6), GEARAspiWDM (2.0.7.5),
    E: MATSHITA DVD-RAM UJ870QJ, Rev 1.00
    Audio CD in drive.
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12 16 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    The last failed audio CD burn had error code 4900(0x00001324). It happened on drive E: MATSHITA DVD-RAM UJ870QJ on CDR media at speed 24X.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.0.1.11 is currently running.
    iTunesHelper 8.0.1.11 is currently running.
    Apple Mobile Device service 2.11.32.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Most Recent Device Not Currently Connected:
    iPod nano (3rd Generation) running firmware version 1.1.3
    Serial Number: 6U747640YXR

  • Error Messages When Burning / Disk only plays in certain DVD players

    When burning most all of my DVD's in DVD Studio Pro, after all of the encoding in the burn process and the program starts the initialization, I get a Media Error Calibration Error message. When I retry to burn, everything seems fine. But, my DVD's only play in some DVD players. Others say unreadable disc. Any ideas?

    Many times, media can cause your problem, I use Maxell myself, (never had any compatibility issues. Here's a URL to a site that rates the quility of many different kinds of media and there reliability.
    It also includes alot of very useful info below the ratings area.
    URL: http://digitalfaq.com/media/dvdmedia.htm
    G5 Quad Core 2.5GHz & G4/1.2GHz Dual 6GB RAM   Mac OS X (10.4.5)   [storage] X RAID's : [capture] Io : [decks] Betacam SP, S-VHS, DSR-11

  • Error message when burning a CD

    Attempting to burn a CD from my playlist in iTunes, but keep getting an iTunes error message that says "The attempt to burn a disc failed.  The burn failed because of a medium write error".

    Take your choice:
    Bad discs
    Dust bunnies in drive blocking laser
    Drive failing
    Crashed/corrupt firmware controlling drive
    Crashed system component
    Try different brand of discs and/or slower burn speed
    You don't say anything about your model computer.  With some you can reset software.  Of course sometimes restarting a computer can help.
    Intel-based Macs: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/ht3964 Apple Portables: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/HT1411 Apple Computers: Troubleshooting the slot-loading SuperDrive - http://support.apple.com/kb/HT2801
    Failing all those it is not uncommon for optical drives to need replacing every 5 years or so.

  • Error message when burning audio CD from iTunes

    I tried to burn an audio CD and got the following error message: "The attempt to burn a disc failed. The device failed to calibrate the laser power level for this media." Can anyone help?

    I tried the patch because I thought if the drive was the same as the ones in dell that it would work, but unfortunately it didn't lol. I've tried 3 different brands of cd-r, no luck. I can burn a cd-rw which is a bonus I suppose.
    I called my support helpline again, and was given the story that the problem is the itunes software and they are not prepared to help. They even said that the patch that dell released doesn't fix the problem even though I gave him the address to the forum saying that it did. Someone must be responsible for the problem, meantime I'm stuck in the middle, and it seems it is the tsst corp L632H CDDVD drive that is giving problems.

  • Error message when burning DVDs

    Hi, I've been burning DVDs on my computer for over a year. However I'm now getting the following error message:
    sense key = medium error
    sense code = 0 x 57
    Unable to recover table of contents.
    I've tried documents and video and a couple of different blank DVD brands...Is it stuffed or fixable. FYI the cd burner is working fine and its reading DVDs Ok as well.
    Thanks
    Peter

    Thanks for the suggestion.
    I ran the Onyx on both my machines and still have the same problems.
    The PB 1.25 whirls and spits the discs out (any disc).
    The iMac 800 now has a new error code since running Onyx.
    0x80020022 instead of 0x8002006e
    The message reads "communication to the disc drive failed."
    I'm going to try one last thing with the iMac. That is using those expensive Apple-made and approved DVD's. I'm using Maxell DVD-RW. Never had a problem with them on the PB, never used them on the iMac. I'm off to the dealer... I'm buying an external DVD burner for the PB- $200 vs. $600... it's a no brainer, just none of the convenience... best, Edward

  • 1771 error message when burning dvd

    I upgraded to the newest itunes and now when i try to burn a dvd i get a 1771 error message  Had no problem just before the upgrade. Is there a way to fix this or a way to go back to the old version  Please help

    Is there a way to revert to my older version of itunes and not lose my library along the way?

Maybe you are looking for