Error message when exporting project

Hi.  recently I haven't been able to export movies in any format or through any option.  I used to be able to seamlessly.  But now I'm getting this compression error:
(The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
I know how to use Final Cut Pro X fairly well but I've never dealt with compression or even know which one I may have typically successfully used in the passed. 
Any ideas? 
Thanks!
Rob

Guessing that you have an earlier version of FCP X running on Mavericks? If so, the app needs to be updated.
Russ

Similar Messages

  • Final Cut Pro X – error message when exporting project

    Hi,
    When sharing a project to Master File I get an error message (error 1) – error occurred when creating frame (10387, 12723, 12836 and so forth).  I keep editing and cutting these ‘bad’ frames out (with the blade), but it keeps finding new error frames.  I originally found the bad frames as they were showing up green in the timeline. Now, I can't find any more green/bad frames, but the error messages keeps coming up.  The file shares to 29% and then stops.
    Does anyone know how I can resolve this issue? How can I get rid of these error messages? How can I export (share the Master File) the project?
    Thanks,
    Alicia

    Are you working 0n 10.0.9? If not, update FCPX and see whether that solves the problem.
    Russ

  • Error message when exporting

    keep getting error message when exporting 12 min project from premier pro ,
    never had this problem.
    Adobe tech used remote access to assist me with something and changed settings etc.

    WHAT error message?
    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • I receive error message when exporting or converting pdf to word

    i receive error message when exporting or converting pdf to word

    Me too and I cannot find online support of any kind. It was hard enough to get to find this forum. Is there a tech support chat or phone number anyone can provide? Thanks!

  • Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

    Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
    so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
    I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
    Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
    It think it gives this error message when i reach 24% everytime during export.
    So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
    anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
    Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
    Taphabit

    boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
    NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
    OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
    is there any way of preemptively avoiding it in future projects?
    thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

  • Error message when exporting to qt, Please Help!!

    I am getting file I/O error message when trying to export a 52 minute wedding project to quicktime. I tried different quictime settings, but nothing helps. Please hep me out with this issue it is driving me crazy.
    Thanks

    Ok, I have trashed my final cut preferences, I checked and my external hard drive is set to mac osx extended. I ran disk utility, I exported to quicktime movie using current settings with movie self contained checked and I get the error message right away. Then I did it without self contained checked and it goes to 21% and I get the error message. Everytime it says this: File I/O error, that is all it says. What does this mean? What can I do next? I have a deadline for this project. I have alot of memory left on my external hard drive. This has never happened before. Thanks for all your help guys.
    D.T.

  • Error message when opening project.

    Hello,
    I get an error message when I try to open a project which I've been working on for the last couple of weeks.
    It looks like this:
    Any tips on how to get it to work again, or am I screwed?
    I've tried to restart Captivate aswell as the computer. The file is not an attachment and I've been working on it every day the last weeks, been working just fine. There's still hard disk space left, so shouldn't be an issue either.
    Any help is appreciated.
    Kind regards,
    Patrik

    I was referring to the Preference option in Captivate to create backup files.  Did you have this turned on?
    Working over a LAN on any Captivate project file is not recommended because a glitch in the network traffic during a save action can corrupt your project file.  This may in fact be what has happened in your case.
    When you say the file was "only saved on my hard drive" do you mean that you saved the project file to your hard drive before opening it each time you work on it?  If so, this is highly recommended.
    Look to see if you have a backup version of your file (look in the same location as the project file and see if you have another file there about the same size with the same name but backup on the end).
    If there is no backup file then you may be able to restore the project by using the Captivate cache files.
    See this link for instructions about how to do that:
    http://blogs.adobe.com/captivate/2010/09/recovering-the-project.html

  • Unable to create volume - error message when exporting

    Hello - relatively new Mac and iphoto user here.
    I'm trying to export photos from iphoto to a 2 GB thumb drive. I keep getting the error message "unable to create volume" when I try to move anything but very small batches of photos over. What's going on? I tried to create a folder on my desktop for the photos but then when I try to move from there I get an error message telling me the photo "is in use" and can't be moved to the thumb drive.
    I would move them to my external hard drive but I'm having trouble with it too. It won't even show up. When I run a disk utility on it it says it can't be verified. Sigh. So that's a whole other issue that will probably take something like Disk Warrior to clean up.
    In the meantime, I'm trying to move images to the thumb drive then I'm putting the thumb drive in my other computer and moving the images from the thumb drive to it's external hard drive A long process when you can only move about 20 images at a time from iphoto.
    I'm just trying to move a good bit of old photos out of iphoto on the Mace because I'm scared that the program or even my entire computer is going to crash and I'm going to have data loss.
    What can I do about the "unable to create volume" message? And what's with the "file in use" error message when I try to move the images off a file folder on the desktop.
    Is there a better way to move 1GB of photos all at once to the thumb drive?

    Welcome to the Apple Discussions.
    Seems to be two issues complicating things here:
    I'm trying to export photos from iphoto to a 2 GB thumb drive. I keep getting the error message "unable to create volume" when I try to move anything but very small batches of photos over.
    What format is that wee drive? Mostly there are FAT16 or FAT 32 and there is a limit to the number of objects they can have on the root of the drive. The workaround is to export to a Folder on the desktop and copy that over.
    Which brings us to:
    I tried to create a folder on my desktop for the photos but then when I try to move from there I get an error message telling me the photo "is in use" and can't be moved to the thumb drive.
    You will sometimes get this message when you try to export two files +with the same name+ to a Folder. As you know your camera is well capable of producing many files called something like DSC_1234.jpeg. In iPhoto these will be in separate folders, so no problem. However, when you go to export them to the Folder on the desktop if iPhoto continues the export one will overwrite the error.
    Solution: Give the Pics a title (Photos -> Batch Change) and a sequential number. Then when you export, in the export dialogue you have the option to use the Title as filename.
    Regards
    TD

  • Error message when exporting as html

    Does anyone get this message when exporting to html?
    MuseJSAssert: Error calling selector function:SecurityError: Failed to read the 'contentDocument' property from 'HTMLIFrameElement': Blocked a frame with origin "null" from accessing a cross-origin frame.
    I get this ever time. I am on a mac and have two macs for developing and both macs give me this error. One is running OS Mavericks, the other OS 10.6.8

    Hi,
    Try this discussion Re: Oam file in Muse generate error
    If you still have any issue, please let us know.

  • An error message when exporting pdf to word

    there is an error message when I try to convert a pdf into word. please advise

    What error message did you receive?

  • Error Message when Exporting to Wave, Aiff or SD2

    I can export to mp3 no problem but when i try to export to wave, aiff or sd2 files i get the following message: Could Not Create File - The export file could not be created. This may have occurred because there is insufficient disk space, or there might be a problem with the directory permissions. All my directories are unlocked and writable (plus Im using the same folder for the mp3's) & I have over 80 gb in total!, please help!

    Ok, I have trashed my final cut preferences, I checked and my external hard drive is set to mac osx extended. I ran disk utility, I exported to quicktime movie using current settings with movie self contained checked and I get the error message right away. Then I did it without self contained checked and it goes to 21% and I get the error message. Everytime it says this: File I/O error, that is all it says. What does this mean? What can I do next? I have a deadline for this project. I have alot of memory left on my external hard drive. This has never happened before. Thanks for all your help guys.
    D.T.

  • Strange newer FCP version error message when opening project

    I'm working on a large (500+ hours) project that I have divided into seperate Final Cut projects so that I can load the sequences without waiting 10 minutes for the masterclips project to open. Lately, when I load the masterclips project it will give me an error message that says that it was made in a newer version of Final Cut. Then, when I restart FCP it will open fine. Does anybody know why it's doing this and how to fix the problem?
    I have been copying a lot of media with media manager lately, it has crashed once or twice could that be part of the problem? Also, there are about 20,000 clips about 75% of them are online and they were captured in different capture projects so they are in different capture scratch folders. Is the fact that they are scattered a problem?

    If you want, you could send me the project. I''ll
    open it and do a save as and zap it back to you. You
    should then be able to open it and do a reconnect.
    May help. My email is in my profile. If it's too
    big to email, you could bring it by my cutting room
    (in times square). If you can email it, be sure and
    archive the file before attaching to an email.
    Thank You
    I really appreciate the offer and I may still take you up on that, but can I get the same result by opening it on one of out other editing systems and doing a save as? The files are too big to email and Times Square is a bit far from where we are.
    Will reconnecting all of the media to a copy of the project help FCP dealing with badly written meta data for clips that is causing corruption. Is that the idea?
    Thanks again for your help.

  • ICC error Message when Exporting PDF

    I hope someone can answer this for me, I searched the web and could not find anything like this. The Newspaper I work for had their Ink supplier create a custom ICC profile for their press. I set up Indesign to use the profile in the color settings as well as when exporting to PDF. Now when I export I get a error message stating "Version 4 ICC Profiles will be converted to Version 2 ICC profiles during PDF Export" most of the time the color on the pdfs come out fine, but there have been a few where the color changes/shifts. Does anyone know why this message appears and is there a way to fix it? I will be doing alot of testing to see if I can get the message to not come up.
    Thanks
    -Dustin Bell

    I'm not sure you'll find exactly the answer you are looking for, but there's a lot of information accessible through this search:
    http://www.google.com/search?q=%22icc+profiles%22+%22version+4%22
    It's some sort of incompatibility issue with the new standard.
    Peter

  • Error messages when exporting,from pdf to word or excel

    i am trying to export a bank statement from pdf to excel after scanning.
    the error message i get is ;damaged document,or internal error.
    what do these messages mean,and how do i fix the problem?
                                    thanks

    Good day,
    Are you getting this error when you're trying to open the scanned document in Adobe Reader? 
    If so, does the file have a .pdf extension on it? 
    -David

  • Strange error message when creating Project Excel Template, can anyone explain?

    I am getting this error every time I create a Project Excel Template, and I don’t know why, nor do I understand what the error message is trying to tell me. The project is very simple, just a task list with resources assigned, but
    the resources are not assigned any costs or rates, as we don’t use. Any help is appreciated, as I have to explain this. Thx!
    Jigs
    Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

    thx John for your help. I don't think any thing at all is applied... I get the same message if I just create a new blank project and try the export. The resulting output looks fine - it's just the message that worries me. I am on the road training some folks
    in Africa in regards to the beauty of MS Project 2013, and this one is a bit embarrassing. Perhaps it's an OS thing?  The only substantial thing that's changed on my machine is that I went from Windows 8 to 8.1. Hmmm, also installed Visio. Well, thx again!
    jigs
    Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

Maybe you are looking for

  • Display listbox key value in ALV GRID method

    Hi All, I have a program in which columns are generted dynamically based on number of fields. The column name is dynamic as it depends on its text while The value in Column's can be 1, 2, 3, 4, 5. I am trying to display this in a list box along with

  • Every time i try to play draw something i keep getting knocked off. I also have a game that is stuck and i can't get rid of it or keep playing.

    I am continually knocked off of draw something while trying to play. I also have a game that when they sent it back to me, it was frozen at the point where it shows them guessing my drawing. It lets me watch my drawing but shows the wrong letters ava

  • Variable length in substring

    i am trying unsuccessfully to write a udf, as suddenly the fixed length field i was using a substring on has changed to a variable length field... i need to pass the field into a UDF and then pass out the last two characters for one field... and the

  • Third Party Nikon Camera Contol Software and Lightroom 4?

    Hello Everyone I am currently shooting tethered, from a camera stand, with a Nikon D90.  My images go into a a specific directory.  I then import them into Photoshop Elements 10 Organizer.  I would like to do everything in one step. Lightroom 4 lacks

  • Photoshop 12 -  Pet Eye Fix

    Photoshop 12 - When I try to use the Pet Eye fix and I click on the dogs eye, it puts the dark circle on the forehead or chest instead of the eye. I click on the eye though. Happens all the time.