Error message when Importing a slide

Hello,
Captivate 4 - When importing a slide from one project to another, importing stops in the middle and an error message pops up "Adobe Captivate have encounter a problem and needs to close".   Could it be because the project has been published?  Please advise.

Hello,
Acrobat.com is a free service from Adobe, where you can store up to 5GB. You just type in the URL (acrobat.com), log in with your Adobe ID (the same you use for these forums) and can start putting files on it. You can share the file (it is in the right-click menu) and send the link to someone. I'll send you a private message with my e-mail address.
Here you can find some information about acrobat.com: http://www.adobe.com/acom/usewith/
Lilybiri

Similar Messages

  • Error message when Importing a slides (attached)

    Posting on behalf of co-worker who gets the following error when importing cp slides:
    any help appreciated
    thanks

    Hi toll,
    Instead of Importing your slides, try copying and pasting them from the original Project file into a new instance of Adobe Captivate and see if that makes any difference.
    Let us know how you get on.
    Best regards,
    Mark

  • Error message when importing data using Import and export wizard

    Getting below error message when importing data using IMPORT and EXPORT WIZARD
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    <dir>
    <dir>
    Messages
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
    Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
    (SQL Server Import and Export Wizard)
    Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
    - Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
    identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information
    about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
    (SQL Server Import and Export Wizard)
    </dir>
    </dir>
    Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4.  The component returned a failure code when the pipeline engine called PrimeOutput().
    The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Smash126

    Hi Smash126,
    Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
    autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
    To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
    The following document about Add Data or Log Files to a Database is for your reference:
    http://msdn.microsoft.com/en-us/library/ms189253.aspx
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Error message when importing CD's into iTunes.

    I've just started getting an error message when importing audio CD's into itunes. +"Error occured while converting the file "........". The disk could not be read from or written to."+ I've been importing CDs for years now and this just started happening last night. The disk image shows up on the desktop, itunes opens and recognizes the disk and searches the database and finds the artist/track names/album etc. Then when I click the import button, I get this message. If I click on the disk image in the desktop and click on a specific file it will play through iTunes. No new changes except for maybe downloading the latest iTunes update. Any suggestions? Thank you very much in advance.

    Iron-Mike wrote:
    Every time I import a CD, mp3 is louder then AAC. It's just every so often if I try AAC the volume will be really low. Like barely hearable. Maybe it has to with the fact the CD was released long before AAC format was around? Something to do with compatibility maybe?
    Iron-Mike, MP3 and AAC were both invented well after CD audio and both algorithms are well aware of CD format. Make sure you have "Soundcheck" settings turned on both for iTunes playback and for CD burning. iTunes Soundcheck is supposed to normalize the volumes in spite of variations in the files. Many people have noticed that they don't really work very well, but having them on is better than nothing.

  • I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?

    I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?

    Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

  • Get an error message when importing from iPhoto says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space."

    I get an error message when importing from iPhoto that says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space." the drive is empty, I just reformatted it to Mac OSX journaled.

    I'm guessing this is an extrenal drive, correct? If so make sure the library you're importimng into is really located on the external drive. By default Aperture creates its library in your home pictures folder.

  • Error message when importing video

    Hi,
    I receive the following error message when trying to import .flv file in Captivate 6:
    I tried restarting the project several times, as well as creating new flash file, with no luck. This is only a 3-slide project with the video embedded on a slide, and will publish as SCORM.

    Hi all Thanks for the rapid response. However I have sort of found the problem but not the solution. I tried loading direct from the card but that failed in the same way. So I had a think what had changed  and it was only one thing. It has always worked before because I was using my XP desktop machine. I am now using a W7 laptop. So I went back to XP and hey presto, it worked. SO what does that mean? Any ideas?? Only obvious difference is the OS. In answer to why I am loading from Photoshop. I have loaded 150 video clips from the card from a compact camera.( Been on safari!) I am using PS to sort and tag for various things, then send one group to PE . I ended up that route because they loaded into PS and not PE. So in summary:- I cannot load either directly from card or via PS, video clips into PE on W7, but I can on XP. I can load same into PS and view OK in PS on W7. In case you need further info, but I suspect its a windows issue? OS=W7, PE V7, PSV7, On the W7 PC it says...  BIT rate=705kps!,Sample Rate=44khz,Channel count =1 Says image is avi but I thought it was mpeg Nothing else running Its a big fast empty machine, you could have the numbers if you really want but I don't think its relevant Sorry its abit long . Thanks Chris

  • Error Message When Importing Bookmarks From A Network Share

    An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
    To replicate:
    The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
    If I copy bookmarks.html local to the kubuntu machine, it imports without error.
    On windows, I can import bookmarks.html from the network share without error.
    Does anyone know why I can't import across the network on the kubuntu version?
    browser being run on windows 7:
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
    browser being run on kubuntu 10.04:
    Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

    It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
    error message/window titled: remote files not accepted. The message states: You can only select local files.
    So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

  • Getting Error Message when importing iTunes Music to iMovie 6?

    Am I missing something? I used to be able to import my iTunes music to a movie creation in iMovie 6. I'm now getting an error message "Error during import. The file could not be imported: The file could not be found."
    I have moved my music to an external drive - don't know if that made a difference.
    Thanks

    Interesting...I have moved my iTunes music onto the external drive probably six months ago. That music still works off the external via iTunes. I just looked in iTunes and my preferences are showing my local drive to store music. And recent music that I have purchased (last few months) is showing in the local drive. When I picked one of the songs from the local it works.
    So now I guess the question is what will happen if I move the music from the local to the external and reset the preferences in iTunes. It should work right?

  • I get a Pre-execute error message when importing from Excel using the wizard.

    Hello, I get the following pre execute error message(see below) when I try to import a table from Excel when using the wizard. I wrote my own code in the edit window. i noticed after writing it that the data types did not appear changed in the mappings window.
    Can anyone explain what these errors mean and how they can be solved. Thank you.
    Operation stopped...
    - Initializing Data Flow Task (Success)
    - Initializing Connections (Success)
    - Setting SQL Command (Success)
    - Setting Source Connection (Success)
    - Setting Destination Connection (Success)
    - Validating (Success)
    Messages
    * Warning 0x80049304: Data Flow Task 1: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available.  To resolve, run this package as an administrator,
    or on the system's console.
    (SQL Server Import and Export Wizard)
    - Prepare for Execute (Success)
    - Pre-execute (Error)
    Messages
    * Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Unspecified error".
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "The metadata could not be determined because every code path results in
    an error; see previous errors for some of these.".
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Invalid object name 'dbo.PriceTable$'.".
    (SQL Server Import and Export Wizard)
    * Error 0xc0202040: Data Flow Task 1: Failed to open a fastload rowset for "[dbo].[PriceTable$]". Check that the object exists in the database.
    (SQL Server Import and Export Wizard)
    * Error 0xc004701a: Data Flow Task 1: Destination - PriceTable$ failed the pre-execute phase and returned error code 0xC0202040.
    (SQL Server Import and Export Wizard)
    * Information 0x4004300b: Data Flow Task 1: "Destination - PriceTable$" wrote 0 rows.
    (SQL Server Import and Export Wizard)
    - Executing (Success)
    - Copying to [dbo].[PriceTable$] (Stopped)
    - Post-execute (Stopped)
    frustrationmultiplied

    Hello,
    Are you willing to try other ways to do the same?
    http://www.excel-sql-server.com/excel-import-to-sql-server-using-linked-servers.htm
    http://support.microsoft.com/kb/321686 (Distributed queries)
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Error message when importing songs

    Hi. I get an error message - unknown error occurred while converting ... Ox77686174 etc - when I try to import songs from CD to itunes. It might happen with one song or with a whole CD. Very frustrating!! Also some songs do not import properly, eg, only get 30 secs or miss first secs of song. Any ideas. Thanks
    ipod nano   Windows XP  
    ipod nano   Windows XP  

    hannka,
    Have a look at this article in the Apple Knowledge Base and let us know if it helps you resolve your situation.

  • Importing Closed Caption .scc file into Premiere Pro CS6.  Closed Captioning is enabled but cannot see the Captions tab.  Also get error message when importing to bin.

    I am using Adobe Premiere Pro CS6.  My aim is to export an mpeg file with closed captioning embeded for network television.  I have watched numbers adobe videos and have spent countless hours researching this.  I am able to generate about 29 different types of Closed Caption files using MovieCaptioner- including .scc (which Adobe says they prefer).  When I try to "Import" the file I get an incompatible error message.  The same happens with all other cc file types when I try to import them.  Second, I tried attaching the .scc as an attachment in the sequence menu.  They show up in the preview window, but do no encode into the mpeg file.  I am aware of this form:  Re: How do I export closed-captioned movies from Premiere CS6?
    Third- I have watched some adobe video for created the CC files within Premiere. http://tv.adobe.com/watch/learn-premiere-pro-cc/create-closed-captions-within-premiere-pro /
    However, I cannot find the "Caption" menu to do so?  Where is it?
    Am I running into problems because I am not on the Creative Cloud?  IF so, is it possible to upgrade and how do i do that.  Adobe has made it incredibly difficult to contact anybody.

    Hi Bracmanf,
    bracmanf wrote:
    I am using Adobe Premiere Pro CS6.  My aim is to export an mpeg file with closed captioning embeded for network television. 
    Sorry, you cannot do this in Premiere Pro CS6. Only QuickTime files can be exported with embedded closed captioning and this must be done in Premiere Pro CC or later. All other formats must use a sidecar file.
    bracmanf wrote:
    When I try to "Import" the file I get an incompatible error message.  The same happens with all other cc file types when I try to import them.  Second, I tried attaching the .scc as an attachment in the sequence menu.  They show up in the preview window, but do no encode into the mpeg file. 
    You can only attach a closed caption file in Premiere Pro CS6, no encoding is available for closed caption files (embedded or sidecar).
    bracmanf wrote:
    However, I cannot find the "Caption" menu to do so?  Where is it?
    Caption is a tab is in the Export Settings dialog box if you want to export with closed captions. This tab is available in Premiere Pro CC and later.
    bracmanf wrote:
    Am I running into problems because I am not on the Creative Cloud?
    In Creative Cloud, you would still have trouble encoding a MPEG 2 file with embedded captions as it is a QuickTime only feature. There might be a plug-in available, but I'm not aware of it.
    bracmanf wrote:
    IF so, is it possible to upgrade and how do i do that.  Adobe has made it incredibly difficult to contact anybody.
    You can download a free trial of Creative Cloud here: https://creative.adobe.com/products/creative-cloud
    Thanks,
    Kevin

  • Error message when importing motion files into FCP

    In FCP.
    I choose a clip/clips in my sequence. Then choose send to motion project and follow the directions from the training dvd.
    By unchecking (embed "motion" content) then save the file with a different name. Then continue with making my graphics over the video clip/clips.
    When I am done I then shut off the video layer of the clip in the motion timeline. Then I save the project. Then close Motion and try to import the motion project in FCP.
    When I try to import, I get an error message stating "File Error: 1 files(s) recognized, 0 access denied, 1 unknown."
    I go back to the training file to try the same procedure and it works fine.
    Go back to my own project and it doesn't work.
    Any ideas? Anyone?
    I have a Mac Pro 2.66GHz / 5 gigs of ram / 512 vram ATI graphics card
    Also working with universal software for FCP studio.
    Intel 2.66GHz Mac OS X (10.4.9)
    Intel 2.66GHz   Mac OS X (10.4.9)  

    OK???
    Don't know what the deal is. But I made a new sequence in my project and copied my other sequence with in the new one and then tried to do the whole clip step for step process of send to motion and importing back in and it worked!!!!
    I check all the listed settings of my sequence in my browser window and both the old sequence and new sequence are the same.
    I am happy that I can move on with my work, yet I am frustrated with the fact that I am not sure exactly what the problem is.
    Thank You Again!

  • Error message when importing footage

    I have Premiere Pro CS4 for Mac and I am trying to import footage from my Fujifilm digital camera the model is F470.  When I import the footage it gives me an error message of "unsupported compression in file"  The file is a .avi and when I try to use ffmpegx to try to convert the file it says it is an unrecognized file.  Any suggestions?
    Thanks so much.

    Hi,
    from you camera manual..definition of terms
    Motion JPEG
    A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file
    are recorded in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
    from : google "  motion jpeg cs4   "
    http://www.videohelp.com/forum/archive/howto-edit-motion-jpeg-mjpg-in-adobe-or-even-window s-movie-maker-t371510.html
    above link had avi sample file...my gspot screen capture shows info about file.
    next image gspot info about sample avi file
    next image custom settings to import to cs3
    next image file is in cs3 and works fine
    good luck

  • Error message when importing?? help!!!!

    the past three times i've imported pictures to my iphoto i get this error message:
    "The following images could not be imported - they may be an unrecognized file type or the file may not contain vaild data
    /private/var/tmp/folders.501/TemporaryItems/iPhoto/MG0248.CR2
    /private/var/tmp/folders.501/TemporaryItems/iPhoto/MG0250.CR2
    does that mean my card is bad?
    last time when i plugged my card in again it found the files that it didnt import last time but i can't always get them...???
    strange??
    I read on another board where I asked this question that someone told me my card was bad... I bought a new card and last night (the FIRST time I've used it) at the end of my importing it gave me that message again on the last 2 images.... does that mean my brand new card is bad too??? I formated the new card as soon as i put it in my camera too..
    my other thought was that my hard disk was almost full -- maybe it was to do with that?? (i had 4000 images on here, i removed 1000 this morning.. and will be doing the rest later...)
    what would that error have to do with??? my sandisk card reader? my iphoto or computer? or the card itself?
    anyone have any ideas??
    thanks...

    my other thought was that my hard disk was almost full -- maybe it was to do with that?? (i had 4000 images on here, i removed 1000 this morning.. and will be doing the rest later...)
    If your HD free space gets down around 1G you will start having slowdowns and other problems. You'll get a system warning at about 500MB. It's strongly recommended you maintain a minimum of 10G free space. More if you can do so. The system and applications require adequate free space for cache abd VM swap files.
    To regain some real estate on your HD you and use Monolingual to remove the unneeded language modules. On my new MBP I recovered 2.4G of space the first time I ran it.
    When you post it would be very helpful if you'd include information on your setup like model, system version, application version, HD size and free space, RAM, etc. That will allow us to better assess your issues right off the bat.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    15 MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM;   Mac OS X (10.4.9)   22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

Maybe you are looking for

  • Mail server timed out

    I can receive mail, but cannot send mail.  I use imap with gmail.  I get an error that says something like   CONNECTION TO SERVER "SMTP.GMAIL.COM" ON PORT 25 TIMED OUT.  Can anyone offer some help on this one.  Thanks.

  • Journal Import Process

    Hi All, I have successfully completed the journal import process . Now, If I want to run this Journal Import process using FND_SUBMIT.SUBMIT_REQUEST wrote in procedure then what parameters I have to pass ? Request to guide me Thanks Sanjay

  • How to transport Web Dynpro for Java to Quality and Production

    Hi experts, I am about to start my first Web Dynpro application, local on my PC. How can I make it available than in quality and production system? Thank you very much. Best regards, Danijela

  • 64bit iTunes for Windows 7

    why can't i install 10.6.1 64 bit?

  • Kind of broken communication between Organizer and Editor PSE 9

    Hi, Today I when I opened my PSE 9 Organizer to select and edit some photots uploaded yesterday, when I selecrt3ed the photos and clicked Fix>Full Photo Edit menu, the Editor opened fine, BUT no photo appeared on the Editor as always. This is the fir