Error message when running form

hi everybody,
im getting this error message when running a simple form.
Positional Parameter after key command line.
Can anyone please help.
thnk u

Check the path to your form. Forms does not like spaces in the path or fmx filename, but the error doesn't explain the problem at all!

Similar Messages

  • Error Message when running BI Publisher

    Hi-
    Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
    Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
    Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
    Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
    Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
    Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
    Any idea regarding the error message
    Regards,
    MACD

    Did your custom report ever ran successfully in the environment you are getting the error.
    Most of the time not all the report definition and associated definitions are migrated to the next environment.
    Have a look at following doc:
    E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1)

  • Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

    error message when running the FSPCCURR - PS/Fin MultiCurrency Process
    =====================================================
    2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
    2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
    2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
    2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

    Hi 841037,
    We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

  • I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

    I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

    Try Here  >  http://pondini.org/TM/C12.html
    More Info here  >  http://pondini.org/TM/Time_Capsule.html

  • Receiving Error Message when running sh rep_populate.sh

    Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
    Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
    THIS PROGRAM IS DEPRECATED!
    You should be generating xml metadata instead.
    Please see http://linux.duke.edu/metadata
    After executing following instructions and replacing server name with our server name.smmj.com
    Client Setup
    1. Import the GPG key
    rpm --import /usr/share/rhn/RPM-GPG-KEY
    2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
    up2date default
    to
    #up2date default
    and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
    Enterprise Linux 5
    (commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
    (commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
    #yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
    #yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
    #yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
    #yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
    #yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
    #yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
    #yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
    #yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
    #yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
    and running additional instructions
    2. Run up2date to install python-urlgrabber.
    up2date -i python-urlgrabber
    Receiving following error
    There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
    Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
    is called public-yum-el5.repo
    Made following changes in that file
    Enterprise Linux 5
    [el5_latest]
    name=Enterprise Linux $releasever - $basearch - latest
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
    gpgcheck=1
    enabled=1
    [el5_addons]
    name=Enterprise Linux $releasever - $basearch - addons
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
    gpgcheck=1
    enabled=0
    [el5_oracle]
    name=Enterprise Linux $releasever - $basearch - oracle
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
    gpgcheck=1
    enabled=0
    [el5_ga_base]
    name=Enterprise Linux $releasever GA - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u1_base]
    name=Enterprise Linux $releasever U1 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u2_base]
    name=Enterprise Linux $releasever U2 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u3_base]
    name=Enterprise Linux $releasever U3 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_ga_patch]
    name=Enterprise Linux $releasever GA - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u1_patch]
    name=Enterprise Linux $releasever U1 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u2_patch]
    name=Enterprise Linux $releasever U2 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u3_patch]
    name=Enterprise Linux $releasever U3 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
    gpgcheck=1
    enabled=0
    Then ran following commands
    up2date -u
    Output
    There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
    yum update
    http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
    Trying other mirror.
    http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
    Trying other mirror.
    Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
    We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
    Thanks, for your help

    We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
    Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
    When we go to System, Administration, Server Settings, Services, Samba is also not there.
    Nowhere can we find an easy way of installing samba on this Linux OS.
    I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
    I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
    I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
    This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

  • Error message when running Transaction Code = ME84

    hi,
    i am getting an error message when running Transaction Code = ME84
    Error is 'No processing (error message P5 017), No data for chosen selection'
    can someone please guide me on this ?

    Hi Mahendra,
    There are several reasons for the release not happeneing.
    1. The issue could be in the selection of release type
    2. Scope of selection
    3. Strategy profile
    Please check whether the selection parameters are considered are right for release to happen.
    Regards,
    Harish

  • Error message when run a query

    I got an error message when I run one of the query on the portal:
    Root Cause
    The initial exception that caused the request to fail was:
    Termination message sent
    INFO
    No connection to system BI_SAP_QUERY available
    com.sap.ip.bi.shared.SharedText system_not_found
    BI_SAP_QUERY
    No connection to system BI_SAP_QUERY available
    com.sap.ip.bi.shared.SharedText system_not_found
    BI_SAP_QUERY
    ABEND BRAIN (892): 1 SIDs from characteristic USITM are missing (CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2)
      MSGV1: 1
      MSGV2: USITM
      MSGV3: CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
    What problem is this? How to fix it? Thanks in advance!

    Hi Zheng,
    Import Support Package 04 for Release 3.50 (BW3.50 Patch 04 or SAPKW35004) into your BW system. The Support Package will be available when note 0693494 with the short text "SAPBWNews BW 3.50 Support Package 04", describing this Support Package in more detail, is released for customers.
    Regards,
    Anil

  • Error message when running updates

    I keep getting an error message when updating my CS programs. "This update from the internet cannot be completed. Please try again later."
    I bought a Canon 6D and the Adobe Camera Raw won't work because it isn't the latest version and that it needs the latest PS version to run the latest Raw version and I can't get either update. Help?

    Cameras by ACR version:  Camera Raw plug-in | Supported cameras
    Programs by ACR version: Camera Raw-compatible Adobe applications
    You should be able to update CS5 without getting an error which is ostensibly what this thread is about, but you are correct in needing CS6 to use ACR 7.3 which is the minimum version of ACR that supports the 6D natively.  You can use the DNG Converter to make DNGs that the older ACR will read, but that has nothing to do with images already processed in LR, because LR knows newer adjustments than your CS5's ACR 6 does.
    To go from LR to PS you'll need to use Edit In PS CS5 and when you see the message about ACR being too old, choose Render using LR Adjustments and Don't Ask Again if that is also an option.  This will cause LR to render a TIF or PSD (whatever you've chosen in the External Editing area of LR Preferences).  If you don't see a message about ACR being too old because you've selected Don't Ask Again previously then you can click the Reset Warning Dialogs button in Preferences and get a chance to answer the question differently if need be.

  • Error message when running Business rules

    Hello,
    We are having the following error message when launching the business rules; cannot calculate - analytic server error (1013131): Failed to start Asynchonous thread. When looking att he Essabse log, we find the following errors around the same time we got this error:
    [Wed May 06 22:01:45 2009]Local/ESSBASE0///Info(1051037)
    Logging out user [brlpo], active for 63 minutes
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
    Substitution variable AOP.Finance.CurrFcst does not exist
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
    Error 1051083 processing request [Get Substitution Variable] - disconnecting
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
    Substitution variable AOP.Finance.Curryr does not exist
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
    Error 1051083 processing request [Get Substitution Variable] - disconnecting
    Would you have an idea of reason of error code?
    Thierry

    Hi,
    Looks like the substitution variables its looking for are missing.
    Can you check that?
    Regards,
    Amol

  • Error Message when running any form

    Besm Allah Alrahman Alraheem
    when I try to run any form I made this error message is appeared
    the message is :
    *"the instruction at"0x04fa0b58" referenced memory at "0x00000054".The memory could not be "read"*
    *click on OK to terminate the program*
    *click to canel to debug the program*
    and when I click ok or cancel the form doesn't run and return to design
    what does it mean and How I solve this error
    Although I remove ORACLE completely and install it again
    gazakom Allah khayran

    Besm Allah Alrahman Alraheem
    thanks very much for concern and reply
    Alhamd for Allah
    I found the solution
    I download another web browser firefox
    and I adjust form builder Edit---preferences----runtime------web browser location-----( the path of fire fox)
    and Idownload the initiator
    then
    forms has been run
    Alhmdo for Allah

  • ERROR message when creating forms

    hi, i am experiencing problems when i try to create a Master-Detail relationship form based on two views(The master table is a view which is a combination of 2 views joined together- and the detail table is a single view).
    The error message that i receive when i try to run the form is
    "cannot select ROWID from a join view
    without a key-preserved table".
    However, when i go back and select a Master Table or Detail Table Primary key in the Display Options page within the form (under Primary Key options), when i run this form it runs fine. But when i go to the Parameters option (in Manage Component Page) and click on the query button, the form displays the data (In Master Row Finder Results Page) but if i click on 'Edit' next to a row an error message apperas saying:
    "Unexpected errors- single-row subquery returns more than 1 row"
    any ideas as to what i'm doing wrong? and any solutions to the problem?
    null

    Hi Allen,
    You might have included the distribution channel in your condition table because of that it is restricting to create record,where
    as it work with customer and material combination.
    Check and revert
    Regards
    Ram

  • "SYSTEM_FAILURE" error message when running BEX query

    Hello,
    I often encounter this error when I run BEX queries (take note that I encounter this error after I have already entered the query values). But when I run the same query in a later time, the query becomes successful, which makes the problem intermittent. I only encounter this when running BEX but I don't encounter such error when I'm running the query in RSRT and displaying it in SAP instead of in Excel. I hope you have any idea about this. Thank you.

    Hi Lee,
    Check transaction ST22 or SM21 after you get that message.
    Hope this helps.
    regards,
    Diego

  • Deadlocked error message when running crystal report

    Hi All,
    I need a bit of guidance as to the following problem.
    Seems there is a lock being created in SQL when running some crystal reports.
    When trying to run a report the following message is displayed:
    Database connection Error L 'ADO Error Code: 0x
    Source: Microsoft SQL Native Client
    Description: Transaction (Process ID 302) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
    SQL State: 40001
    Native Error: [Database Vendor Code: 1205 ]'
    The error is happening intermittently when refreshing the report. It does not seem to happen when no users are using the system.
    Is there any way to stop this from happening? Or is this some kind of limitation with crystal and how it accesses the database?
    Many Thanks,
    Matt

    Hi Matt
    I have had this problem with long running queries as well.  I ended up doing the main part of the query in a view using WITH (NOLOCK) for each table and then reporting on the view.
    This had extra benefits of making the report much simpler and often making the query more efficient and easier to test as well.
    Rob

  • Error message when running script via package

    Hi there,
    I have a problem I can't understand - I am running a script from a package, and I get this error message:
    CopyCatFinanceError
    Invalid dimension ALL_FCSTPRICING in Lookup rule
    where CopyCatFinance is the name of the package, and ALL_FCSTPRICING is the name of a parent in the Category dimension.
    I don't understand why this member is being flagged as a DIMENSION, when it is only a member. And I don't understand why this is being flagged at all - this dimension has been reprocessed, as has the application (in fact, all the applications), the script has been re-validated and a full Optimise has been run several times...
    I am now out of ideas! Any thoughts?
    We are running BPC for MS 7.0 sp 7, on SQL 2005.
    Thanks a lot,
    Jason
    PS. And there are no lookups in this script either - I'm referencing the category dimension with the %CATEGORY_SET% variable as the user selects this at runtime.

    Can you post your logic, also check your lgx files are making sense.

  • Return error code and error message when running a procedure

    Hi all
    I need to run an oracle stored procedure in a job and I would like to know how to call it and how to trap an error code when the procedrue faiils. The equivalent of sys.exit(1) in Python
    These areError trapping source code examples for .net and Python. How can I do something similar with an Oracle procedure?
    Module Module1
    Sub Main()
    Try
    ‘<your code>
    Catch ex As Exception
    System.Environment.ExitCode = 1 'General Exception Error
    Console.WriteLine(ex.Message)
    End Try
    End Sub
    End Module
    Method 2
    Example of Error trapping in Python:
    # Python sample of a function that calls the Trap.cmd command
    import win32api, os, sys
    def CreateErrorFlag(aJobName):
    try:
    commandLine = "C:\Trigger\trap.cmd " + aJobName
    aresult = os.system(commandLine)
    if aresult > 0:
    sys.exit(1)
    except:
    return (aresult)
    print "error"
    sys.exit(1)
    CreateErrorFlag("J123456")

    Oracle PL/SQL has its own exception handling http://download.oracle.com/docs/cd/E11882_01/appdev.112/e17126/errors.htm#i8845.
    I am not working with Python but Oracle Call Interface (OCI) should also return some error code to Python layer if the called PL/SQL code has failed even if you don't use PL/SQL exception handling.

Maybe you are looking for