Error message when running Transaction Code = ME84

hi,
i am getting an error message when running Transaction Code = ME84
Error is 'No processing (error message P5 017), No data for chosen selection'
can someone please guide me on this ?

Hi Mahendra,
There are several reasons for the release not happeneing.
1. The issue could be in the selection of release type
2. Scope of selection
3. Strategy profile
Please check whether the selection parameters are considered are right for release to happen.
Regards,
Harish

Similar Messages

  • Error Message When Running Transaction F.05

    When running transaction f.05 to revalue foreign currency items, I am getting an error message" Error 543 FC Valuation SAPF100" for two of the G/L accounts and showing on the report <Expen.> and <Adjust.> instead of G/L accounts shown for debit and credit entries. No document or reversal document is created for these two accounts.
    Any help is appreciated.

    Thanks for taking the time to reply.
    I have checked OB59. The foreign currency valuation method is already defined. and in OBA1, these two G/L accounts are also there. I could not find any field on the G/L master where to assign the valuation method. For some reason, other G/L accounts mentioned in OBA1 are being posted correctly and are generating the documents and reversal documents except these two G/L accounts. For the correct G/L accounts, against the Debit and Credit posting keys G/L accounts are shown while for these two accounts, <Expen.> and <Adjust.> is written at the place of G/L accounts in the report. Can you please tell me from where the system is picking these accounts that are shown for Debit(40) and Credit(50) posting?

  • Error Message when running BI Publisher

    Hi-
    Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
    Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
    Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
    Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
    Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
    Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
    Any idea regarding the error message
    Regards,
    MACD

    Did your custom report ever ran successfully in the environment you are getting the error.
    Most of the time not all the report definition and associated definitions are migrated to the next environment.
    Have a look at following doc:
    E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1)

  • Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

    error message when running the FSPCCURR - PS/Fin MultiCurrency Process
    =====================================================
    2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
    2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
    2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
    2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

    Hi 841037,
    We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

  • Error message when running form

    hi everybody,
    im getting this error message when running a simple form.
    Positional Parameter after key command line.
    Can anyone please help.
    thnk u

    Check the path to your form. Forms does not like spaces in the path or fmx filename, but the error doesn't explain the problem at all!

  • I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

    I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

    Try Here  >  http://pondini.org/TM/C12.html
    More Info here  >  http://pondini.org/TM/Time_Capsule.html

  • Receiving Error Message when running sh rep_populate.sh

    Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
    Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
    THIS PROGRAM IS DEPRECATED!
    You should be generating xml metadata instead.
    Please see http://linux.duke.edu/metadata
    After executing following instructions and replacing server name with our server name.smmj.com
    Client Setup
    1. Import the GPG key
    rpm --import /usr/share/rhn/RPM-GPG-KEY
    2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
    up2date default
    to
    #up2date default
    and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
    Enterprise Linux 5
    (commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
    (commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
    #yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
    #yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
    #yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
    #yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
    #yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
    #yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
    #yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
    #yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
    #yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
    and running additional instructions
    2. Run up2date to install python-urlgrabber.
    up2date -i python-urlgrabber
    Receiving following error
    There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
    Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
    is called public-yum-el5.repo
    Made following changes in that file
    Enterprise Linux 5
    [el5_latest]
    name=Enterprise Linux $releasever - $basearch - latest
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
    gpgcheck=1
    enabled=1
    [el5_addons]
    name=Enterprise Linux $releasever - $basearch - addons
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
    gpgcheck=1
    enabled=0
    [el5_oracle]
    name=Enterprise Linux $releasever - $basearch - oracle
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
    gpgcheck=1
    enabled=0
    [el5_ga_base]
    name=Enterprise Linux $releasever GA - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u1_base]
    name=Enterprise Linux $releasever U1 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u2_base]
    name=Enterprise Linux $releasever U2 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u3_base]
    name=Enterprise Linux $releasever U3 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_ga_patch]
    name=Enterprise Linux $releasever GA - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u1_patch]
    name=Enterprise Linux $releasever U1 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u2_patch]
    name=Enterprise Linux $releasever U2 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u3_patch]
    name=Enterprise Linux $releasever U3 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
    gpgcheck=1
    enabled=0
    Then ran following commands
    up2date -u
    Output
    There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
    yum update
    http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
    Trying other mirror.
    http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
    Trying other mirror.
    Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
    We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
    Thanks, for your help

    We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
    Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
    When we go to System, Administration, Server Settings, Services, Samba is also not there.
    Nowhere can we find an easy way of installing samba on this Linux OS.
    I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
    I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
    I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
    This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

  • Error message when run a query

    I got an error message when I run one of the query on the portal:
    Root Cause
    The initial exception that caused the request to fail was:
    Termination message sent
    INFO
    No connection to system BI_SAP_QUERY available
    com.sap.ip.bi.shared.SharedText system_not_found
    BI_SAP_QUERY
    No connection to system BI_SAP_QUERY available
    com.sap.ip.bi.shared.SharedText system_not_found
    BI_SAP_QUERY
    ABEND BRAIN (892): 1 SIDs from characteristic USITM are missing (CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2)
      MSGV1: 1
      MSGV2: USITM
      MSGV3: CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
    What problem is this? How to fix it? Thanks in advance!

    Hi Zheng,
    Import Support Package 04 for Release 3.50 (BW3.50 Patch 04 or SAPKW35004) into your BW system. The Support Package will be available when note 0693494 with the short text "SAPBWNews BW 3.50 Support Package 04", describing this Support Package in more detail, is released for customers.
    Regards,
    Anil

  • Error message when running updates

    I keep getting an error message when updating my CS programs. "This update from the internet cannot be completed. Please try again later."
    I bought a Canon 6D and the Adobe Camera Raw won't work because it isn't the latest version and that it needs the latest PS version to run the latest Raw version and I can't get either update. Help?

    Cameras by ACR version:  Camera Raw plug-in | Supported cameras
    Programs by ACR version: Camera Raw-compatible Adobe applications
    You should be able to update CS5 without getting an error which is ostensibly what this thread is about, but you are correct in needing CS6 to use ACR 7.3 which is the minimum version of ACR that supports the 6D natively.  You can use the DNG Converter to make DNGs that the older ACR will read, but that has nothing to do with images already processed in LR, because LR knows newer adjustments than your CS5's ACR 6 does.
    To go from LR to PS you'll need to use Edit In PS CS5 and when you see the message about ACR being too old, choose Render using LR Adjustments and Don't Ask Again if that is also an option.  This will cause LR to render a TIF or PSD (whatever you've chosen in the External Editing area of LR Preferences).  If you don't see a message about ACR being too old because you've selected Don't Ask Again previously then you can click the Reset Warning Dialogs button in Preferences and get a chance to answer the question differently if need be.

  • Error message when running Business rules

    Hello,
    We are having the following error message when launching the business rules; cannot calculate - analytic server error (1013131): Failed to start Asynchonous thread. When looking att he Essabse log, we find the following errors around the same time we got this error:
    [Wed May 06 22:01:45 2009]Local/ESSBASE0///Info(1051037)
    Logging out user [brlpo], active for 63 minutes
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
    Substitution variable AOP.Finance.CurrFcst does not exist
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
    Error 1051083 processing request [Get Substitution Variable] - disconnecting
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
    Substitution variable AOP.Finance.Curryr does not exist
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
    Error 1051083 processing request [Get Substitution Variable] - disconnecting
    Would you have an idea of reason of error code?
    Thierry

    Hi,
    Looks like the substitution variables its looking for are missing.
    Can you check that?
    Regards,
    Amol

  • Deadlocked error message when running crystal report

    Hi All,
    I need a bit of guidance as to the following problem.
    Seems there is a lock being created in SQL when running some crystal reports.
    When trying to run a report the following message is displayed:
    Database connection Error L 'ADO Error Code: 0x
    Source: Microsoft SQL Native Client
    Description: Transaction (Process ID 302) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
    SQL State: 40001
    Native Error: [Database Vendor Code: 1205 ]'
    The error is happening intermittently when refreshing the report. It does not seem to happen when no users are using the system.
    Is there any way to stop this from happening? Or is this some kind of limitation with crystal and how it accesses the database?
    Many Thanks,
    Matt

    Hi Matt
    I have had this problem with long running queries as well.  I ended up doing the main part of the query in a view using WITH (NOLOCK) for each table and then reporting on the view.
    This had extra benefits of making the report much simpler and often making the query more efficient and easier to test as well.
    Rob

  • "SYSTEM_FAILURE" error message when running BEX query

    Hello,
    I often encounter this error when I run BEX queries (take note that I encounter this error after I have already entered the query values). But when I run the same query in a later time, the query becomes successful, which makes the problem intermittent. I only encounter this when running BEX but I don't encounter such error when I'm running the query in RSRT and displaying it in SAP instead of in Excel. I hope you have any idea about this. Thank you.

    Hi Lee,
    Check transaction ST22 or SM21 after you get that message.
    Hope this helps.
    regards,
    Diego

  • How to track error message when calling Transaction: va02

    Hi all,
        As we all know, when we change an order through T-Code: VA02, system will update modified data to corresponding database. Meanwhile, if our operate is not legal or incorrect on T-code: VA02, system will call corresponding error messages to us.
        Now I want to know:
       1. how to track the error messages
       2. Is there any Tcode such as: SM21 that we can see the message logs after our operation?
    Thanks.

    Hi ,
    message table for call transaction
    DATA: BEGIN OF G_T_MSG OCCURS 0.
            INCLUDE STRUCTURE BDCMSGCOLL.
    DATA: END OF G_T_MSG.
    Exucute transaction via Call Transaction
      CALL TRANSACTION  'FB01'
                     USING g_t_bdcdata
                     MODE g_l_mode
                     UPDATE 'S'
                     MESSAGES INTO g_t_msg          .
    errors will be stpored in the table g_t_msg ..
    Thanks .

  • Getting Error Message when Running MRKO for Settlement  of Consignment

    Hi Experts ,
    When I am trying to run MRKO to settle the consignments , i am getting the below  error message ,can you please advice the reason for this and how we can resolve this error meesage . Using MRKO and trying to settle the documents .
    Error: *TAXPS cannot be determined in non-tax items*
    Thanks for your Support and Comments.
    Regards,
    Veera.

    Hi
    For MRKO settelement (for consignment/pipeline) you must maintain the purchase info record.
    In the P.I.R PRICE and  TAX CODE is mandatory, in your case the tax code you entered is not taken by the system just check the tax code or change the taxcode and create a p.o and post goods issue and try MRKO.
    Thanks

  • When installing a NI 5112, I get an error message when running the test panel.

    I have recently decided to reinstall my PCI 5112 high speed digitizer in a different computer, for practical reasons. After having installed the software, hardware and successfully passing the self test, an error (10800) occurs when running the test panels. The signal applied to the channel and the different parameters used, worked fine with the previous computer but not with this one. Any idea why?
    Thanks,
    Thomas

    Hello Thomas,
       The error code you are getting is related to the board not recording enough samples in the given time interval.  May I ask which series of PCI card you are using. This can be found by looking at the device in Measurement and Automation Explorer and looking under devices and interfaces. The series letter is the one on the end of the number after the hyphen. E.g. PCI-MIO-16E-4 would be an E-series board.
    Also which versions of Measurement and Automation Explorerand NI-Scope are you running? Are these the same versions as you used in the old PC system? Sometimes an upgrade in the version is all that is required to fix such a problem but unfortunately it can sometimes cause a problem if you upgrade! It would depend on the versions you are currently running and the series of the board that you are using.
    LeeM
    AE,
     National Instruments
    Message Edited by LeeM on 10-31-2006 10:47 AM

Maybe you are looking for