Error message when trying to activate caller ID fo...

Hello. I keep getting an error message when trying to activate my caller ID for my mobile number. It keeps saying "We were unable to send you a confirmation code at this time. Please try again later. " I have checked the list of countries excluded from caller ID and my country is not on it. Please can anyone help? thanks
Tia

Same things has happend to me for 4 days.
I have no answer, but I'd sure like one.
 -- Gerry

Similar Messages

  • I get an error message when trying to activate imessage please help

    i get an error message when trying to activate imessage. i already restored my phone didn work tried turning it off still nothing

    Did you try again?
    What network are you using?
    Are you using a supported carrier?

  • BW3.5: Error message when trying to activate the transfer rule

    When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error  in [[  ]]
    Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
    Diagnosis
    An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
    System response
    The action was terminated. No data was changed.
    Procedure
    Use the generation log in source system CI2220 to identify the error, and remove the cause.
    CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
    Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
    Thanks in advance
    Arunabha

    Hi Roberto,
      Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
      Thanks
    ARUN

  • Getting an error message when trying to activate HTC Thunderbolt

    When I dial *22898 I get a Message that says
    !Phone Activation
    A Verizon Wireless SIM card has
    activated your service and updated
    your phone's roaming capabilities
    Can anyone please tell me what this means?

        Hello kimme00171! I can help you decipher the message you received while attempting to activate the Thunderbolt. Because you are using a 4G device, it's no longer necessary to call *228 to activate your phone. The activation can be completed by following the steps below:
    1. Sign in to My Verizon.
    2. Locate the I Want To… section.
    3. Under the DEVICE column, select Activate or Switch a Device. The devices active on the account display.
    Select a device.
    4. Click Next. The Backup Contacts page displays.
    5. If Backup Assistant is installed already, click the Back Up Phone Now button.
    6. If eligible for Backup Assistant, click the Install Backup Assistant button and follow steps to install from device.
    7. If NOT eligible for Backup Assistant, click the appropriate Operating System link and follow steps
    8. Select Next. The Activate or Switch Device page displays.
    9. Type the IMEI in the Enter Device ID field.
    10. Select Submit. The Activate Phone page displays.
    11. Select Continue to SIM Cards. The SIM Card Required page displays.
    12. Do one of the following:
    Select Send me a SIM Card (Free SIM Card is mailed to the customer).
    Type the number in the Enter SIM ID Code field If you already have a new or existing Verizon Wireless-certified SIM Card.
    13. Select Continue. The Select a Plan page displays.
    14. Choose the desired plan.
    15. Click Select. The Select Features & Services page displays
    16. Click to make any desired changes.
    17. Select Select Features & Services. The Your Packages page displays.
    18. Select Submit Changes.
    19. The Activate Device confirmation page displays instructions for completing the activation process.
    I know I provided you with a lot of steps, but once you get started you will breeze right through. Have a great day.
    ChaunceyM_VZW
    Follow us on twitter @VZWSupport

  • I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a H

    I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.

    Nevermind I fixed it. Thank you.

  • Error message when trying to use media players on new T500 ( drivers? Other?)

    Getting error messages when trying to use Windows Media Player or InterActual DVD player to play DVD or play Audio files.
    Downloaded latest audio & Video drivers from Lenovo site , Windows XP 3 patch and latest apps from Win MP and InterActual...
    Any further ideas?   Help? :-)

    Hello,
    Thank you Community Members for providing a troubleshooting tip. It is very much appreciated.  First, you want to make sure that your system meets the minimum requirements, which can be viewed at the link below:
    VCAST Media Manager Specs
    Next, uninstall the VCAST application and reboot your computer. 
    Then, disable your firewall and antivirus program and download the VCAST Media Manager application again, which can be found at the web link below:
    VCAST Media Manager
    If you are still having trouble with this service, it will be necessary to contact our Technical Support team directly. Please call 1-800-922-0204, option 3, from an alternate phone and be in front of your computer if you need to call.
    Thank you.
    KellyW@VZWSupport

  • Error message when trying to order on line

    Anyone else getting the below error message when trying to order the iPad2 online in Europe?
    An error has occurred during your session. Please return to the Store Menu to continue shopping.

    Be aware that this happened to me and when I contacted my credit card company, they said Apple had contacted them to take the money, yet no order is appearing on my account so now I'm stuck in limbo - my credit card company has approved the transaction yet I have no record or order number with which to question apple about it
    The guy at the call centre also said he had received several calls about apple over the last 30 mins so this is not an isolated incident
    S.

  • Getting an error message when trying to export from the Lightroom 5.7.1

    hi
    i'm getting an error message when trying to export the images from the Lightroom, all the images are on the external drive
    i'm using windows 7 with 4gb of ram core i5
    "AN INTERNAL ERROR HAS OCCURRED WIN32 API ERROR2 ("THE SYSTEM CANNOT FIND THE FILE SPECIFIED.")WHEN CALLING SHELLEXECUTEXW FROM AGWORKSPACE.SHELLEXECUTE"

    i found the answer my myself
    post processing was blank that was causing it  to happen

  • Getting error message when trying to display error messages on a ProfilePage

    Hi All,
    I'm getting following error message when trying to display error on a Profile page.
    On page i'm seeing this:
         org.apache.jasper.JasperException: java.lang.IllegalStateException: getOutputStream() has already been called for this response
              org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:515)
              org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:405)
    In condole, i'm seeing this:
         18:23:00,206 ERROR [[jsp]] Servlet.service() for servlet jsp threw exception
              java.lang.IllegalStateException: getOutputStream() has already been called for this response
                 at org.apache.catalina.connector.Response.getWriter(Response.java:621)
                 at org.apache.catalina.connector.ResponseFacade.getWriter(ResponseFacade.java:198)
    Please let me know what could be the reason.
    Thanks,
    Vishnu

    HI David And Nitin,
    Here is the code using which i'm trying to display the error messages on registration page, but this code fragment is outside registration form will that cause any problem?
    <dsp:droplet name="Switch">
      <dsp:param name="value" bean="ProfileFormHandler.formError"/>
      <dsp:oparam name="true">
      <table>
      <dsp:droplet name="ProfileErrorMessageForEach">
      <dsp:param name="exceptions" bean="ProfileFormHandler.formExceptions"/>
      <dsp:oparam name="output">
      <tr style="color: red">
      <td><dsp:valueof param="message"></dsp:valueof></td>
      </tr>
      </dsp:oparam>
      </dsp:droplet>
      </table>
      </dsp:oparam>
      </dsp:droplet>
    Thanks,
    Vishnu

  • Getting "line disconnected" error message when trying to monitor

    Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer.  Anyone else have this issue?  Any suggestions on how to fix?  I have reconfigured each camera with the router but still having the error message.  I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).

    Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
    If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras.  It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup.  However, starting on day three and on, it has worked very well.
    The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs.  All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about.  I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days.  It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log.

  • Error message when trying to open windows7 via vmwarefusion.

    error message when trying to open windows7 via vmwarefusion.;
    Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
    I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere?  I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp?   It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up.  I'm almost certain  it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
    I've uninstalled vmare completely and reinstalled, it, but the problem persists.
    Any help?

    You will probably get a better response asking this question in VMWare's forums for Fusion.
    Best of luck.

  • HT204053 I am getting an error message when trying to sign into my icloud. Help

    Why do Iget an error message when trying to sign in my icloud?  Can you also tell me how to combinned my icloud accounts?

    If they were in your camera roll and on your phone when you last backed up, they would be included in your iCloud backup.  If you restored the entire backup you should recover them.

  • Error Messages when trying to install, uninstall or run iTunes 9

    I get the following error message when trying to Install iTunes:
    The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
    I search my entire computer for the file but it's not there.
    Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
    "The feature you are trying to use is on a network resource that is unavailable"
    Catch-22, I can't install or uninstall and when I try to run iTunes I get:
    "The action is only valid for products that are installed"
    Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.

    wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
    ok here is what you need to do:
    go to the link below and download the Microsoft Windows Installer CleanUp Facility.
    http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
    once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
    ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
    next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
    go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
    Hope it works for you mate!

  • Keep getting error message when trying to sign in to make a Genius Bar Reservation

    Keep getting error message when trying to sign in to make a Genius Bar Reservation

    Make the reservation by phone. 

  • I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

    I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

Maybe you are looking for

  • What's the Name and PWD in JCO Creation ?

    Hello All,         I want to create a JCo Connection. These are the steps which I've followed :- 1. Logged on to the Portal with username and PWD. 2. Went to the WebDynpro Tab. 3. Clicked on Create JCo Connection 4. Entered the details :-            

  • Photoshop CS3 doesn't respond when opening a file (jpg or .psd)

    I have been using CS3 since it first came out with no trouble at all. I am running OS 10.4.11. Then a couple  days ago, when I would open a file, such as a jpg, the color wheel just  spins and spins. When I check the finder, it says that Photoshop is

  • ERP EIC & Org Structure Mapping - SAP HCM

    Hi All Can any one provide me information on Org Structure Model for EIC shared Service Centre and how to map with existing org structure? If we create 4 levels of SSC (Level 1 , 2,3 & 4) We will be creating 4 org units but do we need to create these

  • Select-Option F4 Help Multiple Selection

    Hi I have wriiten the code to provide custom F4 help for a field using F4IF_INT_TABLE_VALUE_REQUEST' and then updating the values back to screen using Function Module DYNP_VALUES_UPDATE. It is working fine when the F4 is used on the main screen, But

  • Question re: being blocked

    Is there a way to find out if my text msg. to a non-Verizon cell # is being blocked? Too many msgs. say sent, then later show up on my list as error: Message Failed. A communications error has occurred (Communication Error) and I wonder if it's a blo