Error message when trying to disconnect-help!

I just traded in my really messed up mini for a nano. I installed the new software, and plugged in the nano, and the playlists seemed to transfer over fine. itunes says it is ok to disconnect, but the nano says do not disconnect. So I clicked the eject button and itunes gives me a message that says "the ipod cannot be ejected because it contains files that are in use by another application". What the heck does that mean? No other programs are open on the PC. I am afraid to just unplug it and break it even before I've even gotten to use it! HELP!!

Shutting down your computer with the iPod connected is fine. The message you're getting just means there's something using your iPod, and it won't stop the communication, so you can't disconnect.
You could also try this:
Open MyComputer
Find your iPod under Devices With Removable Storage
Right-click on it
Click "eject"
See if this allows you to disconnect... if not, just shut down your computer, and then you should be able to disconnect your iPod. It's hard to say if you're going to get this message everytime you want to eject the iPod... it depends on what it is that's using the iPod.
CG

Similar Messages

  • Error message when trying to disconnect ipod

    I just got my ipod yesterday and I kept getting the do not disconnect message on the screen. I finally figured out that I had to disconnect it. When I did I got a message saying the ipod couldn't ejected because it contains that are in use by another application. I don't know what I am supposed to do. Please help.

    This Seems Like Something Beyond Our Helpfulness I would Contact Itunes Store Email Tech Support about this matter
    http://www.apple.com/support/itunes/contact.html?form=music&topic=Music%20Purcha ses&subtopic=Lost%20or%20Missing%20Items
    Message was edited by: 2012ABC

  • I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

    I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?

    I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?

    See my answer to your previous duplicate question. What happened when you tried my answers?
    LN

  • HT201262 i keep getting an error message when trying to sync my iphone in itunes, "duplicate file name specified." Anyone have any help?  Please??

    i keep getting an error message when trying to sync my iphone in itunes, "duplicate file name specified." Anyone have any help?  Please??

    You can try going to iTunes with your device connected, select your device, then click view, show duplicate items

  • I downloaded the icloud software on my computer in order to sync calendars and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calenders - can anyone help with this?

    I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars.  I downloaded it for the first time a month ago and  had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error.  What do I do now?  Can anyone help with this?

    Hello easbda,
    Thank you for providing the details of the calendar issue you are experiencing with your iPhone.  I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I get this error message when trying to upgrade software "The Iphone update software server could not be contacted"  Can anyone help?

    I get this error message when trying to upgrade software "The Iphone update software server could not be contacted"  Can anyone help?

    I'd start with the following document:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • Getting "line disconnected" error message when trying to monitor

    Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer.  Anyone else have this issue?  Any suggestions on how to fix?  I have reconfigured each camera with the router but still having the error message.  I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).

    Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
    If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras.  It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup.  However, starting on day three and on, it has worked very well.
    The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs.  All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about.  I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days.  It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log.

  • HT201210 I get the following error message when trying to restore seeting: unexpected error occurred (3014). anyone will be able to help please? thanks

    I get the following error message when trying to restore settings on my iphone:settings could be restored due to an unexpected error occurred (3014). anyone will be able to help please? thanks

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • HT204053 I am getting an error message when trying to sign into my icloud. Help

    Why do Iget an error message when trying to sign in my icloud?  Can you also tell me how to combinned my icloud accounts?

    If they were in your camera roll and on your phone when you last backed up, they would be included in your iCloud backup.  If you restored the entire backup you should recover them.

  • Help ....Error message when trying to open itunes 11 after installing..cant solve it !!!

    Keep getting an error message when trying to open iTunes 11 after installing...running Windows ...have tried most fixes ...message says ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
    Also when iTunes first opesn after installing ....the message come up that says "A required iTunes component is not installed .please repair or reinstalll iTunes (-45075)"
    Have repaired , reinstalled , created and used a restore point etc etc
    How do I fix this !!! Please

    ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

    I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

    Did you try this:
    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.
    Also see:
    HT4061 error message 3014.: Apple Support Communities

  • I get an error message when trying to activate imessage please help

    i get an error message when trying to activate imessage. i already restored my phone didn work tried turning it off still nothing

    Did you try again?
    What network are you using?
    Are you using a supported carrier?

  • I get an error message when trying to download apps from the app store.  "safari can not open the page because the address is invalid".  Please help!!

    i get an error message when trying to download apps from the app store.  "Safari can not oprn the page because the address is invalid"

    You can't use Safari to download iPad apps. Only use iTunes/App Store.
     Cheers, Tom

Maybe you are looking for

  • Fields in an internal table

    How to find number of fields in an internal table ? my requirement is i have 20 internal tables and the data is being uploaded into an application server. so how to find no of fields in a particular internal table

  • Batch Management-Identified Stock

    Dear Expert Process Over View Batch Management: I have given Purchase order for 100 ton Steel Coil for Single Grade NV23S-100L ,Purchase order release with single line item NV23S-100L quantity 100 Ton, once I received the material I  am receiving 10

  • Psd to swf

    Imageready CS2 had a fantastic export to swf option that as far as I can tell has completely dissapeared. Can we please get this back? It allowed you to take vector based layers in photoshop (with solid fills) right into flash and maintain full edita

  • Oracle callable statement problems in weblogic 5.1

     

  • Variable table name

    Hi all, I tried to execute the statement below inside a push button on forms 6i select count(*) into :global.temp from *:variable_table_name* where rownum=1; but it fails to compile because it only accepts a static table name....I need such statement