Error message while creating an inbound delivery to generate an idoc

hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leo

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Similar Messages

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Deletion marked material should give error message while creating proc ord

Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur.

Warning to error message while creating a SC

Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RK

Use the BBP_DOC_CHECK_BADI.
1. Get the backend message with a getmessage* FM.
2. Check if it's a closed cost center warning.
3. Add your own error message (can be just a copy of the message you retrieved) as an 'E' error
Because this is a backend warning, you can't influence it in SRM with the message control in SRM unfortunately.
Regards,
Robin

Error message while creating Appropriation Request

Hey there,
I am getting Error message while creating Appropriation Request.
I have done all the confiig according to SAP Best Practices U30 Investment Management.
When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
Any help would be greatly appreciated
RAISE_ exception
Runtime Errors         RAISE_EXCEPTION
Date and Time          18.07.2011 07:15:07
ShrtText
Exception condition "ERROR_IN_STATUS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
     situation.
Error analysis
A RAISE statement in the program "SAPLAIA_TOOL" raised the exception
     condition "ERROR_IN_STATUS".
     Since the exception was not intercepted by a superior program
     in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
     Transaction SE37 (Function Library). You can take the called
     function module from the display of active calls.
Trigger Location of Runtime Error
     Program                                 SAPLAIA_TOOL
     Include                                 LAIA_TOOLU11
     Row                                     119
     Module type                             (FUNCTION)
     Module Name                             AIA_TOOL_GET_STATUS
Source Code Extract
Line SourceCde
89 *                TYPE       = SY-MSGTY
    90 *                CL         = SY-MSGID
    91 *                NUMBER     = SY-MSGNO
    92 *                PAR1       = SY-MSGV1
    93 *                PAR2       = SY-MSGV2
    94 *                PAR3       = SY-MSGV3
    95 *                PAR4       = SY-MSGV4
    96 *           IMPORTING
    97 *                RETURN     = ls_return.
    98 *   endif.
    99 *   if not ls_return is initial.
   100 *      append ls_return to return.
   101 *      raise error_in_status.
   102 *   endif.
   103 *
   104 * Füllen der Ausgabetabellen
   105    perform fill_output_tables tables lt_status
   106                                      lt_jsto
   107                                      et_appreq_status
   108                                      et_appreqvarnt_status
   109                                      et_appreq_user_status
   110                                      et_appreqvarnt_user_status
   111                                      lt_objnr
   112                                      lt_objnr_varnt
   113                                      lt_return
   114                               using i_language
   115                                      i_with_text.
   116
   117    if not lt_return[] is initial.
   118       append lines of lt_return to return.
>>>>>       raise error_in_status.
   120    endif.
   121
   122
   123 ENDFUNCTION.

Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB

Error message while creating or editing a report

Hi, we acquire the Crystal reports Ver 2008 type full, and this moment we are having an error message while creating or editing a report, the message suddenly appears saying:
Crw32.exe has enconutered a problem and needs to close.
Is there a patch available or what can we do?
Thanks.

Hi Lucus,
This is to general an error, 1st try to reinstal the software, make sure you have admin rights on the PC, and try again. If you still get the error, I would call the support number, and let them help you out. You may need to know, the type of PC or server the software was installed on, the current os, available memory... etc For now, I would go to windows (If that is what you are running ) and re-install or repair the software.

Error Message while creating connection pool

Hi all,
I got the following error message while creating connection pool for the
SQL Server thru the Application Server Admin Console.
The message is,
An error has occured.
Operation 'create.Jdbc.ConnectionPool' failed in 'resources' Config Mbean. Target exception message :
JdbcConnectionPool Already Exists: cannot add duplicate.
But the connection pool for the SQL Server was not there in the list.
What may be the possible reason for this error.
i was trying to deploy a BMP entiy bean using the Sun Application Server.
Prior deploying i just tried to create connection pool and test the connection using the Admin Console
Please help me by providing a solution.

Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe

ERROR Message while creating Rebate condition record T code VBO1

Dear Experts,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
Please give the solution to create condition record.
Regards
siva

Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB

Error message while creating database

Log error
while creating new database
Robot-properties
XML Parsing Error: junk after document element
Location: http://portalserver/psconsole/faces/search/RobotPropertiesHome.jsp
Line Number 18, Column 1:<body id="_id3" onload="return _id3_jsObject
I have created my new search engine .
and the robot is not running.I getting log error.
and no directory is created with the search name.
please help me with the fields..
creating search server..
required Port:
required Configuration Name:
Required Instance:
*Web Container Administration*
Required Administration Host:
Required Administration Port:
Required Administrator:
Required Administration Password:
*Web Container Directories*
Required Install Directory:
Required Instance Directory:
Required Document Root Directory:

Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe

Warning to Error Message while creating Shopping cart

Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RK

Hi Richy,
The cost centre which you have maintained is locked for postings. Try to change the cost center and the warning message should be gone.
If you still want to chnage the message from warning to error,you can do in SPRO-->img->SRM->SRM Server -> Cross app basic settings->message control -> Influence message ctl.
If an entry doesnt exist for this message in SPRO,make an entry in view BBPV_PDMSG (Tranx: SM30).
See these related threads for more pointers:
Re: Error Messages in BBP_PD
Re: How to change an error message to a warning message in SRM
Re: Where can I change type of message BBP_PD 083 from warning to error
BR,
Disha.

Error message while creating GL masters

Hi,
I am getting an error message while ncreating GL masters. "No account group is defined in chart of accounts" i have created in chart of accouts despite creating also it showing some message when i clink on create GL.
Please advise.
Chakri

Hi
Please Check in OBD4 t.code we can create account group or not?
Ex: above screen here define the structure of gl a/c. befor creation.
Regards
Suresh

Suppress an error message while creating a return PO ( ZRO type) (ME21n)

Hello All,
I have to write a code in order to suppress the below message while creating a return purchase order (of type ZRO) , transaction ME21n after entering the purchase organization, purchase group, the vendor & the material no :-
"You have no authorization to create without reference to another document".
For users with the below values of parameter ID & parameter value :-
parameter ID = EFB & parameter value = 02 in transaction 'SU3' , under "parameters" tab, this message is getting triggered.
My requirement is to suppress this message.
Please suggest an exit name or a BADI name wherein I can implement the code for this requirement.
Regards,
Rachana.

You can remove parameter ID EFB
and for Order type other then ZRO you can put check of doc. reference.

Getting error message while creating Contract through BAPI

Hi
I am getting a 'Specify either address number or address handle' message while creating contract from BAPI BAPI_CONTRACT_CREATEFROMDATA. Can someone please tell me what can be the cause.

Hello Bharati,
you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
Jai

Error message while creating Overwrite exit for a standard class method.

Hi,
I was trying to create an overwrite exit in class CL_HRTMC_AC_TA_DASHBOARD for method GET_DEVPLAN_ASSESSMENTS. I created an Enhancement Implementation first. But when I tried to insert Overwrite exit method, I got error message that "The class has not yet been converted to the new class-local types" . In the toolbar->Utilities, I saw an option "Convert Class-local types" and when I clicked that it asked for the Access key. Eventhough I cancelled the process, now I am seeing some inactive parts in from this class in my Inactive object list. When I try to activate, it's again asking for access key and not able to activate it. Not sure what has actually happened. Is it possible to revert it to old form? Please advice!
Thanks,
Mahesh Nair.

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Error message - While creating a deliver document

Hi Guys,
I am trying to create a sales order and eventually want to create the subsequent - 'Delivery document'.
I did look into the schedule line and it has confirmed the quantity.
But when I try to deliver it it gives an error message
"There are no schedule lines due for the given order item up
to the date chosen."
Not sure what is teh reason.
Can the factory calender being a reason for the problem.
Any help will be made of great help.
Regards,
Pandi

Hi Jonathan,
Thats was indeed fantastic and it worked.
The issue seems to be a combination of current date (factory calender) + date when the material is available from the schedule line.
In my case the material was available on 17/03/08 in the schedule line and the delivery screen was taking the current date - 15/03/08.
I changed it to the date inline with the schedule line and it worked.
Thanks for the help and quick response.
Regards,
Pandi

Error message while creating an inbound delivery to generate an idoc

Similar Messages

Maybe you are looking for