Error monitoring abap proxy in WorkBench

Hi all...
I have a problem monitoring an abap proxy in RWB. I receive this message when i try to see the details of the message (Message Content and Queue Monitor options in Message Display Tool) in message monitoring in RWB: User PIRWBUSER has no RFC authorization for function group HTTPTREE ., error key: RFC_ERROR_SYSTEM_FAILURE. In the other side, i can see the header of the message in the message data of the same option.
Any idea with this problem?
Thanks...

Hi,
check your RFC destination. Here is more info about this error message.
In general we get this error while trying to access Unicode / Non Unicode system using Non Unicode / Unicode RFC connection...Your RFC destination should have same Character Format of your target system
Please checkc this property in RFC desctination under Special Option tab.
For r/3 system, Menu->Status. Check if its unicode or not and it should have the same format as that is listed in RFC.
The user should have following authorizations:
SAP_XI_APPL_SERV_USER
SAP_XI_IS_SERV_USER
Regards,
Venkat.

Similar Messages

  • Error in ABAP Proxy generation?

    hai pals,
    my intention is to push the data from XI to SAPBWSEM system throgh an ABAP PROXY.
           but , here i got an error which i already mentioned in the forum, that is " no connection to integration builder(only local data visible) ".
            i went to the integration engine configuration in "SXMB_ADM" transaction in SAPBWSEM server.
            in sxmb_adm transaction ,the system ask for the "specific configuration data-catagory" like TUNNING , MONITOR,RUNTIME,TRACELOG,DEBUG and RFCADAPTER.
             im little bit confused in choosing the "catagory of configuration data".so can u pls help me in this error.
    with cheers.
    rajesh

    Did you create the RFC Destinations LCRSAPRFC and SAPSLDAPI to point your SLD ? If not do that.
    Then create RFC Dest INTEGRATION_DIRECTORY_HMI type H. Look at your XI box and make these 3 RFC Dests.
    Then use the following thread to fix your IFR_ADDRESS
    Values for table SPROXSET
    regards
    SKM

  • Forwarding Application Error in ABAP Proxy to CCMS

    Hi,
    We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
    Best regards,
    Rahul Kumar

    Is there a way of getting the above thing done? I have a very similar Issue.
    Rahul if you have found out a way of doing the same please let me know by email. [email protected]
    Thanks,
    Karthik

  • Error in ABAP Proxy

    Hi ,
    I am getting an error in the proxy , it was working fine but today only it is throughing the following error :
      <SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
      <SAP:P1>CREATE_OBJECT_CLASS_NOT_FOUND</SAP:P1>
      <SAP:P2>ZZCL_MIIA_UKEUROPE_TLOG</SAP:P2>
      <SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error during proxy processing</SAP:Stack>
    Please let me know the reason of this .
    Thanks in anticipation
    Anita

    Hi,
    I am assuming you have a server proxy (Inbound interface).
    Your proxy objects have not been created properly.
    To check this, send a message to XI.
    Either XI itself will throw an error message, or running SXI_MONITOR in receiving SAP application will show you the error . If you do not see any entry for corresponding interface, then proxy objects have not been created properly.
    Regards,
    Puloma.

  • How to catch CONVT_NO_NUMBER runtime error in ABAP Proxy

    Hi all,
           In our abap proxy program, sometimes the CONVT_NO_NUMBER will happen and cause the program dump and then stuck the whole queue. I noticed that this error cannot be caught by CX_ROOT exception class. So, how can I catch this runtime error and avoid the dump of our program?
    Thanks,
    YiNing

    Hi,
    While Executing the proxy,first give \h TC and then execute the proxy then it will automatically got to debugging mode.
    I think ur data is worng,if it is wrong then only u will get this type of errors.
    Regards,
    Phani

  • Error with ABAP proxy

    Hi all,
    I have an ABAP proxy - XI - Webservice scenario, in the XI side we are getting error saying input data not coming in. How to check weather proxy is triggering the actual payload or data?
    There has been a change in the WSDL from the Webservices side, they have changed the data type, so we too updated the mapping in XI. So do we need to change anything in the ABAP program which triggers the proxy,
    how do I check weather proxy is triggering data or not?
    I want to see weather its problem with the ABAP trigger program.
    Thanks,
    Srinivas

    Hi ramakrishna,
    Does R/3 side SXMB_MONI give successful chequered flag when the message is processed?
    Because for correctly processed message, the data is being updated in the table, but I can't see the chequered flag on the R/3 side.
    But for the wrongly processed ones its showing PL_TIMEOUT error and showing red flag on R/3 side, this is what I see on the R/3 side:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Integration Server
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Pipeline timeout condition satisfied</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

  • SAVE_STYLESHEET RC_6 error in ABAP proxy- CRM

    Hi,
    I developed a POC with just 2 fields in DT,for sender SOAP adapter and reciver ABAP proxy. It is running successfully.
    But when i developed a actual scenarios with big structure it is giving the following error.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Inbound Proxy
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIProxy</SAP:Category>
      <SAP:Code area="ABAP">STYLESHEET_GENERATION_FAILURE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Attempt to generate transformation required for rendering/parsing failed (, class , method ) STYLESHEET_GENERATION_FAILURE Attempt to generate transformation required for rendering/parsing failed (SAVE_STYLESHEET RC_6, class ZII_HSBP_IN_MI, method EXECUTE_ASYNCHRONOUS /1SAI/TXS) Attempt to generate transformation required for rendering/parsing failed (SAVE_STYLESHEET RC_6, class ZII_HSBP_IN_MI, method EXECUTE_ASYNCHRONOUS /1SAI/TXS)</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    The only difference in both cases is, i developed everything in client 120 for POC. For actual scenario i created proxy class in client 110 and Technical system and everyting is pointing to client 120. Is it causing any problem?
    Everyting is fine in XI but in CRM SXMB_MONI i can see the above error...
    How to solve this issue.
    Message was edited by:
            ashok sri

    i tired again.. i regenerated the proxy ... but still same problem..
    i dont think internal framework problem.. because it worked for other scenario ( test scenario). I think i only messed it up some where.. but i dont know how to find out  or how to debug the problem..
    I have  a doubt on package structure in which i am saving the proxy class.
    i created a structuer package( level1) for which i assigned SAPPINT and for all other packages( level2- main package,level3-non main package, level4-non main package)i assigend SAI_SXMS, SAI_TOOLS, SAPPINT. I am saving the proxy class in level4 package. I am not able to assing SAI_SXMS,SAI_TOOLS to structure package. Is it causing any problem???????
    any help please...
    Message was edited by:
            ashok sri

  • Idoc syntx error me21 , abap proxy call transaction

    Hi Experts,
    I am struck with the below problem, could you please shed some light on the issue, appreciate your help and  rewarded.
    scenario:
    XI sends NEW PO message to abap proxy, in abap proxy we populate bdc_tab
    and call ME21 as below
    CALL TRANSACTION  'ME21' using bdc_tab mode 'N' update 'S'  messages into messtab.
    problem:
    EKSEKS01 idoc is getting created with syntax error status code :26  in ECC5.0
    only 5 sigments are generated in the idocs. the three segments ( E1PISHO, E1PISIO,E1PISSO not generated).
    after transaction executed it returns subrc 1001, msgid--> ME, MSGNO --> 218.
    Thanks In Advance.
    Ranjit.

    Hi Atish and Nishant,
    Thanks much  for the immediate response.
    1.Would like to know what is the mandatory data to be passed for PO creation in BDC table.
    2. Is there any user exit or where the idoc creation happens during me21 execution.
    I have verified the po in we02 , as before mentioned the three sigments are not getting created and i am not sure the reason.
    Note: We didnot have any output configured in ECC 5.0 for this idoc to be created.
    I am really not able to locate in debug mode FOR  ME21, where this ekseks01 idoc getting created and triggered.
    Appreciate your help.
    Thanks in Advance.
    Ranjit.

  • Transaction Update Error using ABAP Proxy

    Hi Experts,
    I am facing an issue using ABAP Proxy.
    File is coming from PI to SAP system and it will update the Transaction IE02 using this inbound ABAP Proxy. If records fails then a mail is going to concerned team.
    Issue:
    When File has been sent from PI to SAP through ABAP Prxoy, it shows that record has been updated in the Transaction IE02 but when I checked manually the record, it has not updated the same. But when I test the same record through my ABAP Prox, it updates the record and when I checked it, Reocrd hs been updated.
    Can anybody help me in this case?
    Regards
    Sachin

    Hi Anup,
    Can you please explain me for the same? If I need to put External Commit then how It is working when I running it manually
    Regards
    Sachin

  • Handling appln errors in ABAP proxy

    Hello All,
    How is application related exceptions handled in a ABAP server proxy.
    Say I update a customer  record from a proxy(asynch). Now the customer data does not exist in R/3.
    Regards,
    Jai Shankar

    Jai,
    for this purpose you should define your message interface to include a fault message type using the default data types created in a namespace exchangefault data and exchange log data.
    when you create the proxy object for this interface, you will get exceptions defined int he object. You can raise the exception and populate the error details into corresponding strucures for exchange fault data & exchange log data.
    praveen

  • HTTP_RESP_STATUS_CODE_NOT_OK - Error in ABAP proxy

    Dear all,
    I work in a scenario in which we send data from the R/3 to XI using the ABAP proxies.
    But the messages are not received in XI.
    The messages are in error in SXMB_MONI of the R/3 system.
    The error message we get in SXMB_MONI of the R/3 system is "HTTP_RESP_STATUS_CODE_NOT_OK"
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
      <SAP:P1>401</SAP:P1>
      <SAP:P2>Unauthorized</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
    Could anyone kindly suggest a solution to rectify this error?
    Thanks.
    Best Regards,
    Thangesh

    Hi,
    >>401
    1) Might cause due to insufficient right of the User ID
    2)Try with this Login XIISUSER
    3)Tcode SICF -> Default_host -> sap -> xi
      ( Check right password for the user id )
    4) Check the RFC connection User Id..and it's settings.
    This Might Help you
    HTTP_RESP_STATUS_CODE_NOT_OK - 401 Unauthorized
    HTTP_RESP_STATUS_CODE_NOT_OK 404 Error
    HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
    Regards
    Agasthuri Doss

  • Pipeline error for abap proxy to IDoc scenario

    hi experts,
    i am getting the following system error in moni for my proxy to idoc scenario.
    In error it shows :
    "Receiver service cannot be converted into an ALE logical system"
    but i have checked adapter specific attributes of both receiver
    and sender sys and they both have logical systems ( SO this is not the problem)
    TRACE
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
    pls suggest .
    Appropriate points will be awarded

    Hi,
    Copy the payload from moni and test the mapping.
    The error may be due to XML file generated by sender channel is not proper.
    and also look at this blog
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    Please reward points if it helps
    Thanks
    Vikranth

  • How to change default PIRWBUSER password for ABAP Proxy monitoring ?

    Hi,
    Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
    In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
    How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
    Regards
    Fernand

    Hello there.
    Please check the note below according to your system:
    #999962 - PI 7.10: Change passwords of PI service users
    #936093 - XI 7.0: Changing the passwords of XI service users
    #721548 - XI 3.0: Changing the passwords of the XI service users
    Regards,
    Caio Cagnani

  • SOAP error in synchronous scenario for ABAP Proxy with Oracle D/B

    Dear Experts,
    I am working in Sender ABAP Proxy <====>SAP PI 7.31 JAVA only <====> Oracle Database. My proxy configuration are working successfully.
    Apart from that, I have maintained a SOAP sender communication channel under the ECC business system with
    Transport Protocol as HTTP
    Message Protocol as XI 3.0
    Adapter Engine as Central Engine
    When I am testing from ECC at Tx SPROXY, I am receiving following error.
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:746) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:505) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at
    1. In XI3.0 protocol, I can not select BE but when selected HTTP 1.0 as Message protocol then I can find the BE.
    2. No Response message is shown in ECC when testing the message.
    3. How do Receiver JDBC adapter for Oracle Database is configured 
    4. What would be Message Protocol for Oracle Database i.e. XML SQL Format or Native SQL format for Select operation.
    Please guide.. All your inputs will be appreciated......
    Regards
    Rebecca

    Dear Indrajit,
    Appreciate your inputs.. Yes I have configured all the ABAP proxy configurations and there no question of missing any thing as Tx SLDCHECK in ECC is working perfectly fine.
    But still to go, some of the queries needs more input.
    1.In ID, i have created a Sender SOAP communication channel with listed details.
    Transport Protocol as HTTP
    Message Protocol as XI 3.0
    Adapter Engine as Central Engine
    Is there any parameters which I may be missing from Module tab of Synchronous SOAP Cc ?
    2. In the Cc monitoring, the JDBC receiver status shows "Database operation successfully completed" but I could not find any response data from database. The Message monitoring should have 2 messages for 1 trigger, but I could find only 1 message by SOAP only?
    Sorry to bother experts...Please answer in sequence...
    Regards
    Rebecca

  • Error handling in abap proxy

    Hi,
    In my scenario, I have written code in the execute_synchronous method of the abap proxy in ECC. I want to capture all possible errors that might occur here and for all of them i want to capture the message id and the text and send it out. what kind of possible errors/exceptions can occur and how to handle them. My proxy class simply selects data from multiple tables in ECC and returns the same.
    thks

    Hi,
    for outbound proxies the error handling should be done within R3 itself and there is no need to send errors to XI or receiving system for that matter. You would want someone from R3 side to take a note of it.
    For Inbound proxies, you will have to implement the Fault messages
    Fault message types are designed for application-specific errors that occur on the inbound side and that are reported back to the sender or persisted in monitoring.
    ·        In the synchronous case, when an application-specific error occurs on the inbound side, instead of sending a response message back to the sender, the application can send a fault message to handle the error.
    ·        The fault message of the application for an asynchronous ABAP server proxy is persisted for monitoring. In the case asynchronous of Java server proxies, the fault message is part of a negative application acknowledgement (see Acknowledgments).
    Application-specific means that the application on the inbound side triggers the error itself because, for example, the request message did not contain sufficient information.
    For more information on the same.
    http://help.sap.com/saphelp_nw04s/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
    In your case, since you said that you are selecting data from some tables, the possibility is that an entry is not found in the DB tables you will have to simply populate the fault message data and raise an expection CX_FM. It also depends on what error handling requirements from the Business .
    regards,
    Advait.

Maybe you are looking for

  • Do I need NVIDIA 130?

    I am about to upgrade my iMac Flat Panel G5 to the new generation of intels. I don't play games on the Mac, but I would like to take advantage of a better graphics performance when using FotoMagico to make slide shows. Do I actually need to go for th

  • Query Builder in BO 4.0

    Does anyone know how to get to Query Builder in BO 4.0? Or does it no longer exist? Thanks Al.

  • VBAP-ANZSN not getting updated when writing serial number to order

    Hey ABAP, i got some Problem with serial numbers. We have a rental process, where user gives in serial number at time of delivery. Since we need to create orders based on original order, we need to take the serialnumber from the delivery and write it

  • HP VirtualRooms seem to connect but the room content does not display.

    When initially connecting to the HP Virtual Rooms system: http://rooms.hp.com, all looks well and I can enter a conference/meeting key and after hitting the 'go' button and I am greeted with a 'Thank you for joining us message'... but there is no act

  • Nano freezes itunes and "my computer"

    Hi, Just bought an Ipod Nano 4gb 3rd gen, it has software version 1.0 and formated for windows. I am trying to use the ipod on my desktop AND laptop both with same result. Problem is this, as soon as i connect it with the USB cable itunes freezes, at