Error msg: "Mapping not sufficient"
There is a scenario wherein I have to map a single record to two IDOCs, I created a message map in such a way that the source side record's cardinality is 0..1 and the destination side IDOC's cardinality is 0..2, while testing the message map I get this error
"Mapping Object XXXXXX incomplete.
Structure with min!=max without mapping"
I am a fresher to XI, please help me to understand what this error means and how to correct the same. Thanks in advance!
Hi Ezhil,
What do u mean by "the destination side IDOC's cardinality is 0..2"?
If you are trying to send multiple idocs to the receiver, you should see this blog:
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Regards,
Divija
Similar Messages
-
Editing a pdf form that I created. Adding header, currently the header only appears on page 1 of a 3 page pdf form. I want it to appear on each page. I am receiving the error msg "do not have sufficient permissions to perform this task"
In Adobe Acrobat use a Action for this.
-
Mapping Problem-Mapping not sufficient Error Message
Hello SDNers,
I m facing one problem, details are as below
Source Structure
MT_Source
Invoice 1..unbound
Type 1..1
Invoice Header 1..1
PartyID
ID 1..1
DocuID
ID 1..1
InvoiceLine 1..unbound
Item 1.1
InvoiceSubline 1.unbound
costCentre 1..1
GL Code 1..1
Target Structure
MT_Target
Target 1.unbound
Bgr00
Stype 1..1
Xkeep 1..1
Bkpf 1..1
Stype 1..1
Tcode 1..1
Bldat 1..1
bukrs 1..1
Bseg 1..1
Stype 1..1
Tbnam 1..1
newbs 1..1
wrbtr 1..1
zunor 1..1
Bseg1 1..unbound
Stype 1..1
Tbnam 1..1
newbs 1..1
wrbtr 1..1
zunor 1..1
Mapping need to be done in such a way like
Invoice Header must go in the corresponding fields of BKPF ,BSEG
Invoice Line fields must go in the corresponding fields of BSEG1
I tried split by Value with a user defined function copyPerValue
public void copyPerValue(String[] a,String[] b,ResultList result,Container container){
for(int i=0;i<=a.length;i++)
result.addValue(b[0]);
InvoiceLine----
CopyPerValue ->SplitBYValue[EachValue]->bldat
DocumentDateTime----
but I m getting Mapping not sufficient Error Message.
Pls help me in getting resolve this problem.
Thx in advanceHi;
Just check that all the mandatory fields (1.1 occurances) are mapped.
No node in the target message should be left red.
Mudit -
Hello friends,
In message mapping part from File to IDOC. I am doing mapping of infotype 14 message type with the corresponding idoc. But when I activate it I am getting the following error:
Activation of the change list canceled Check result for Message Mapping MM_INF14_LS | urn:tcs:test: Mapping not sufficiently defined
As far as I know I have properly mapped the fields which I am picking from the file. But I am not very sure what to do woth few fields in the IDOC which appear to be red in message mapping
Kindly give me the solution.
Regards,
LokeshThanx guys...I tried changing the description of other mappings whch were already activated. And thn I tried activating I got the same error:
Activation of the change list canceled Check result for Message Mapping MM_02IT | urn:tcs:payroll: Starting compilation Source code has syntax error: java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"
what possibly can go wrong? Is there any way to activate it.
Looking forward for ur reply.
Regards,
Lokesh -
Windows error msg: "Can not write to drive G: Joe's iPod"
Halfway thru the download process (1780 songs) from itunes to my ipod I get a windows error msg:
"Can not write to file G: Joe's ipod. All the data has been lost. Check for an error on your computer or network."
Getting the error msg: " Can not write to drive G: Joe's ipod. All data has been lost, your computer or network may have failed."
"Windows/ My computer" shows my ipod as drive G: and itunes starts up properly when I plug my ipod into my firewire port. About halfway thru the download (1780 songs) the transfer from itunes to my ipod stops and I get the above error message. (Never worked with USB). I am not on a network.
According to tech supt, I have:
-Installed Service Pack 2,
-Restored ipod to factory settings
-Installed update 5.0.1. Everything worked fine last Feb with the version 4 of itunes when I first loaded everything up.
Have tried to reinstall version 4, but no luck.
My ipod charges fine thru the firewire cable.
Any ideas?? Thanx anyone.Joe,
I am having the same problem, did you ever solve it, please email me at [email protected] with any help
Thanks -
Trying to upgrade Itunes get the following error msgs: Itunes not installed correctly reinstall (Windows error 126) and missing file MSVCR80.DLL?
Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98972) -
Error Interface Mapping Not found..
Hi Friends,
I am simply using file to ABAP proxy scenario.
I am getting error as : This I am getting while test my configuration at Scenario level Tools - > Test Configuration..
Interface Mapping :
Runtime error
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_Source_Target_Proxy_: Parsing an empty source. Root element expected!
Plz help.
Regard
Deepak SodhiHi Rajesh,
I am keeping the file as it is from Meassage mapping SRC File..
Message Mapping is giving me no error..
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_Proxy xmlns:ns0="https://tcsfenest/test">
<EmpId>315143</EmpId>
<EmpName>Deepak Sodhi</EmpName>
<EmpOffc>Gurgaon</EmpOffc>
</ns0:MT_Source_Proxy>
Only at the time of Testing configuration Environment -> Test Scenario.
Its giving me error Interface mapping not found.. My strucuture is flat.
DT - Complex type
Empid element string
Empname element string
Empoffc element string
Please help to resolove this issue.
Regards
depak -
Mapping Not sufficiently defined
Hi,
I'm creating maps between DTDs & IDOCs. I have mapped all the required fields. Some required fields that cannot be mapped, I have disabled them. But on activation, I still get the message "Mapping Not sufficiently defined".
What am I missing?
Thanks
AshwiniHi,
did you map for all the mandatory fields of the target structure ? check out did u miss any fields .. this you can find with Red color..
Also check did you map the target structure root node...
before this activate the message type and continue
Regards,
moorthy -
Keep getting error msg saying not connected to intrnet when I try to sync iPhone but Internet is up and running
Firewall of some type blocking whatever port the help system uses?
Router setting? -
Tried to run firefox as usual but the the page could not connect the server. Thus, uninstalled the browser and tried to install a newer version. Could not run the program and error msg "can not create temp folder archive" popped up.
See http://answers.yahoo.com/question/index?qid=20080702200623AAOYP13
-
Error msg: "do not have enough access priviliges for this operation"
Windows 7
iTunes 9.0.2.25
When I open itunes, I get this error msg :
I get a "Can not save a library file - I do not have enough access priviliges for this operation."
Any suggestions?I went ahead and add my Program files(86)/iTunes as an Exclusion in the Eset Advanced Set up any ways- just in case.
As well as that, you'd need to set an exclusion on the iTunes library and media files (as per their instructions for 2000/XP/Vista when using Smart Security 3.x).
The default location for the relevant folder on Windows 7 is:
C:\Users\username\My Music\iTunes\ -
FBVB error msg "Transaction not defined for direct call-up"
Dear Gurus,
Pls help me on issues below:-
1.)What is the diff between FBV0 and FBVB?
2.)When i try to initialize FBVB. I received an error "Transaction FBVB not defined for direct call-up. Can u teach me how to fix it up coz one of my end-user requested this T-code.
Thanks.Nothing needs to be fixed - the transaction is called behind the scenes when the user uses FBV0 to post a parked document. Users should never call FBVB directly.
Andrew -
ALE : Error msg 'Application not posted'
Hello all,
when i send master data from sender to receiver then at recaiver side it shows the error like 'Application not posted'.
what it means ?
I have checked all the connection for both system.Remote connection is also working.IDOC generated at sender side is showing status 3. i.e. data is successfully transfered
whats the problem?
regards
NilimaHi Nilima,
Application not posted. error is for data integrity as already said.
Means that document can not be posted in recieving system. Say if you are sending a currency which is not configured in the recieving system. You are sending INR and recieving system needs USD say. So data can not be posted.
Try posting a document in the recieving system with the same data, it will through the same error take help of any functional consultant and solve the issue.
Now go to we05 and edit the idoc replicate the same changes as you already found. and reprocess the idoc using tcode BD87.
Hope this answers your curiosity,
Award points if useful revert otherwise,
Aleem. -
ID-Error: Interface Mapping Not Found
Hi,
While doing the test configuration in Integration Directory, i'm getting the below errors, after pasting in the payload area & after executing step by step:
Sender Agreement
Also, once when i'm adding message interface to interface mapping in Integration Repository, i'm getting the error as:
"Message Interface does not exits on any software components"
afterwards this error not came once again.
Plsssssssss help me to resolve the same.
Regards,
BalajiHi Balaji,
try to do a cache refresh,using tools>>clear SLD cache.
also see if message mapping and interface mapping have been created properly and activated.
Check the following:
--> The o/b and i/b interfaces in the mapping program are same as used to create the interface det. object.
--> THe Interface mapping shld be active...
Refer to the topics at the below link
http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/4f/ef761a5ecfb1418b79896e10fe4c57/content.htm
Reward points if this helps
Regards
Vani. -
Error Msg - Device Not Compatible with IPhone - Want to switch to airplan?
I keep getting this error as if I have a device hooked to my phone. I have nothing attached. Statred getting it a couple of days ago and it pops up every 5 minutes or so. Have done a complete RESET/RESTORE and I still get it.
Recently added a few new apps - Weather Channel, USA Today, and Ocarina.
Any suggestions out there?Hi OneColo,
Try using a small brush, like a tooth brush, to remove any debris from the dock adapter port on the iPhone as suggested here: http://support.apple.com/kb/TS1505
You can also try restoring the iPhone to rule out software issues. This article: http://docs.info.apple.com/article.html?artnum=305744 will walk you through restoring the iPhone.
If the issue is not caused by debris or the iPhone software, the iPhone may need hardware repair. Make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
http://www.apple.com/retail/geniusbar/
U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
-Jason
Maybe you are looking for
-
Syncing iPhone and iPod Touch to same calendar
DH has an iPhone and I'm about to get an iPod touch. We're setting up iCal on the home computer and we both want to sync our devices to our iCal calendar, so we both have record of birthdays/appointments etc. Currently I've set iCal up with only the
-
How to get a highlight icon on toolbar?
I use blank word documents to do my writing. Often I need to highlight phrases. When I used Word, I just put the highlight icon on the toolbar. But with Pages, I can't figure out how to highlight without going through MANY clicks. I know there must b
-
Hi, i am using SAP by Design in india. I am trying to get GL entry report in which i require a field "Approved by" but unable to find - please suggest.
-
hi to all...! my question is that when my caps lock is on it types lowercase and vice versa. I have HP envy m6 core i5 laptop having windows 8 in it... any one with a good solution how to make it ok ? pls help me cos it is very annoying....
-
There seems to be a lot of graphics in the content area in full editing that were in Photoshop 9.0 that are totalling missing in that are missing or omited in Phtotoshop elements 10. Anyway to get additional graphics. tim