Error "need to place tarball in the right location" jre & jdk upgrade

Using pacaur to upgrade seom AUR packages - namely jre and jdk Iget this set of errors, ad infinitum:
Due to a change in how Oracle handles the Java SE License Agreement
you are required to:
1) accept the license and download the tarball (jre-7u4-linux-x64.tar.gz) yourself:
http://www.oracle.com/technetwork/java/javase/downloads/jre-7u4-download-1591157.html
2) move it to $startdir (/tmp/pacaurtmp-larry/jre/)
-> If saved in ~/Desktop/, ~/Downloads/ or /tmp/, it will be auto-moved for you
-> Press any key to continue..
==> ERROR: You need to place the tarball in the right location
-> Press any key to retry (or Ctrl-C to cancel)..
==> ERROR: You need to place the tarball in the right location
I have downloaded the java tarball and placed it in the correct directory. Still get same errors as above,
any ideas why?

Thanks for your offering. I have a bit of house cleaning and rearranging due
to my knowing I bought the CS4 software and had installed it and thinking
things would work as before I did not realize that by buying and installing
another software program Proshow Producer on an external HD and then
learning from the company that it had to be on C:/ to work properly. That
forced moving other things around, like CS2, CS3 and CS4 and leaving CS on
C:/ then reinstalling Producer as CS works fine for the pictures used in
Producer and all related files on C: as all my other working photos had to
move with the software!! With 5 and a half terabits on 6 external HD's I got
careless and did not properly set things set up as I should have in
anticipation of my current problem and Adobe's programers, not being mind
readers programmed things to look on C: when CS2,3, and 4 lived elsewhere.
It's all a mess but I do have my serial numbers and did discover, thanks to
your Creative Suite Cleaner Tool offering I found a link to Adobe's original
CS4 trial files that I was told by Adobe were no longer available due to CS6
and I can re-download CS4 there and use it since at the moment my CS4 is
hiding from me. I think a clean re-installation should work before running
the 'cleaner' with its' gottchas. I shall send a later follw up when things
are successfully reloaded. If you think of anything else of value, I would
certainly appreciate your knowledge!
Fred Kirby

Similar Messages

If the device category is wrong and need to change it to the right one. How to correct it ?

Hello experts ;
I have a question in relation with Meter Asset Management :
If the device category is wrong and need to change it to the right one. How to correct it ?
Many thanks !

Hi,
Dont know much about IS-U, but there is a different forum for IS- utility, you can post your query there to get quick response.
SAP for Utilities
Regards,
sitanshu

I bought an iPhone in San Francisco and I live in Ecuador, I need a place to claim the world apple warranty in Ecuador, because I have a problem with the screen

I bought an iPhone in San Francisco and I live in Ecuador, I need a place to claim the world apple warranty in Ecuador, because I have a problem with the screen

There is no "world apple warranty" on iPhones. As paulcb points out, the warranty is only valid in the country of origin. You will have to bring it to the U.S. or send it to someone you know there to get it serviced.

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

I lost my ipod and I need to know where is the last location before its off.(its definded in icloud)

I lost my ipod and I need to know where is the last location before its off.(its definded in icloud)

Your welcome.
If you don't see it on the map now when you go to icloud.com and check Find My iPhone, if it is shown on the device list you can click on the device, then check the box next to "Notify me when found" (see image below) and you will receive an email when it goes back online, if ever. The email is sent to the email address associated with your iCloud ID.
There's nothing else you can do. I don't believe iCloud support can tell you it's last location either once it's cleared from the map.

The error threshold has been exceeded. The receive location is shutting down

I am doing polling using SQL adapter......For small records polling is succesful......but for large recorde i am getting following error..
The receive location "RcvSqlDataLoc" with URL "" is shutting down. Details:"The error threshold has been exceeded. The receive location is shutting down.".

Hi
You might have resolved this issue, However I would not read all those records in one go! Instead I would read them in batches and pass to BizTalk.
I would use
Scatter and Gather Pattern to distribute the records to multiple orchestration instance for processing and execute them using more than one BizTalk host instance?
If you have already resolved the issue, Then it would be great if you share the solution with us!
HTH,
Naushad Alam (MCC,MCTS,BizTalk Server)
If this is helpful or answers your question - please
mark accordingly!
alamnaushad.wordpress.com|
My new TechNet Wiki
"BizTalk Server: Performance Tuning & Optimization"

Error in decimal places while using the currency ends with 4 e.g. CNY4,USD4

Dear all,
I need ye help, the problem that a report having a field KONP-KBETR .......the report moves the decimal 2 places to the right. And so, 412.3846 becomes 41238.46. ..occurs only when the currency ends in 4 (CNY4, USD4, EUR4..)
Can you please guide.
Thanks in advance .
Rgds,
Pem

Hi,
I think you are misinterpretting the things.
1.CNY4, USD4, EUR4 are Currency keys and they does not end with 4 they are CNY, USD, EUR.
2.and KBETR is CURR(11,2) so it will always display TWO places of decimals.
Regards,
Neha

On PDF report I need Photo copy box on the right hand side

When I generate Pdf report then on the right hand side I need the Photo copy box for attaching the photo.
This is the my xsl file.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:fn="http://www.w3.org/2005/xpath-functions">
<xsl:output method="xml" indent="yes" encoding="utf-8" omit-xml-declaration = "yes" />
<xsl:template match="/">
<fo:root>
<fo:layout-master-set>
     <fo:simple-page-master master-name="my-page">
          <fo:region-body margin="1in"/>
          <fo:region-before extent="1in" background-color="silver" />
     </fo:simple-page-master>
</fo:layout-master-set>
<fo:page-sequence master-reference="my-page">
     <fo:static-content flow-name="xsl-region-before">
          <fo:block height="150px" width="1024px" background-color="#003366" >
          <fo:external-graphic width="340px" src="http://localhost:9000/web-determinations9000/images/logo.png"/>
          </fo:block>
     </fo:static-content>
     <fo:flow flow-name="xsl-region-body">
          <fo:block>
          <xsl:apply-templates mode="dump" select="/session/entity[@name='global']/instance[@label='global']"/>
          </fo:block>
     </fo:flow>
</fo:page-sequence>
</fo:root>
</xsl:template>
<xsl:template match="/session/entity[@name='global']/instance[@label='global']" mode="dump" priority="100">
     <fo:block margin-top=".5cm" margin-left=".1cm" border-start-style="">
          Student ID : <xsl:value-of select="attribute[@id='StudentId']/number-val"/>
     </fo:block>
     <fo:block margin-top=".5cm" margin-left=".1cm" border-start-style="">
          First Name : <xsl:value-of select="attribute[@id='StudentName']/text-val"/>
     </fo:block>
     <fo:block margin-top=".5cm" margin-left=".1cm" border-start-style="">
          Last Name : <xsl:value-of select="attribute[@id='p3@Properties_studentProps_xsrc']/text-val"/>
     </fo:block>
</xsl:template>
</xsl:stylesheet>
Thanks.
Edited by: 848231 on Apr 13, 2011 4:40 AM

Unfortunately, there aren't any XSL-FO gurus tracking this forum. You might have better luck posting to a forum dedicated to that type of discussion.
Kind regards,
Davin.

Need to be pointed in the right direction for buttons

Hello,
   I'm trying to figure out if this can be done.    Lets say you have 3 buttons on a web page. When you hit one of the 3 buttons, text appears and locks on the page. Each button has different texts that appears and locks. No matter what order a person hits a button. The texts for that button appears.
   I'm not sure how to do this. I know how to link buttons and send it to different parts of the timeline, just don't know how this would work.
any help to be pointed in the right direction would be great.
     Thanks in advance,
        Peter

Hi Ned,
        If I make a movie clip for each button (3 total) and each button has its own text. If I have all three layers on top of each other it will play all the text at once. That something I don't want. If I spread the layers so there not on top of each other. I can code it to have the text appear when the button is press but, only one set of text will appear at a time. What I would like is once the button is pressed and the text fades in it locks in place. If you press another button, that button texts fades in and locks. The text from the other button stays locked
       Other Idea I had was when your working with buttons, and double click on it to get the "up-over-down-hit" on the timeline. on the over part, I know how to put text in that way. is there a way to lock it once the mouse goes on the "over" part of the button ????
   Thanks,
     Peter

PL guide me.Linux Vagabond needs resting place.Is Arch the righ one ?

Hi Folks
Can you Pl tell me if I have come to the right place.
I have been wandering , all over in the so many "LINUX Art Galleries" , essentially looking at so many 'paintings' but have'nt found my 'Monalisa'
Basically here is what I want as Bottomline :
<> AMD64 Distro
<> light distro . Easy to use and configure or at least with good doc so I can figure something out . < 2g total HDD Space.
I have a Qosmio wigth C2D 4G ram. So speed and ram are not a problem
<> I can install the latest version of the atheros AR9281 WLAN Driver with 802.11N support .So far I am frustrated there also , I can only get some 1-2 mbps on Ubuntu c.f. Draft N speeds on Windows
<> Best Skye sound support . I have realtek Hi Def Codecs in windows
<> Support for NFTS partition in RW mode ( that is good Jaunty has it built in )
<> Support for Chicony USB 2.0 Built in Web Camera
<> Torrent and P2P's installable easily
<> Some light weight word and pdf programs
<> Light weight Image and Scanning Program
<> Support for HP Printing
Previously I had Ubuntu now that is totally caput.
Here is what happened....
Initially I could not Sudo . It says I am not in the subdoers file. When I tried it fix that ....I cant login, it gives a bunch of crappy messages chown klog:klog not found etc. I went the recover way and dropped to root and tried some stuff - no avail
I got all this wonderful presents , when I updated packages. It all started with my terminal fonts not showing up properly - they'd look 'L ike Th is or pro bab ly Wo rse' . So I started yet another operation trying to figure that out .....and then on..no more sudo....no more login....and Damned.......
This is like those windows update experiences or worse still cos there is no system restore point concept.
Thats all and I have been just running around and catching my own tail trying to figure this out.
When Jaunty was up and running , my Skype worked for Just first 2 mins. Then on there was NO SOUND. I cant hear and I am not heard. Whenever at all I heard something, I could easily be mistake for a fisherman howling in some sailors language and believe me that has broken many a potential good relationships.
So just put that all in Plain English.Folks am open to something that is AMD64 Linux and not Ubuntu ( or non Buntu/ Debian ) also
Thats all and I have been just running around and catching my own tail trying to figure this out.
When Jaunty was up and running , my Skype worked for Just first 2 mins. Then on there was NO SOUND. I cant hear and I am not heard. Whenever at all I heard something, I could easily be mistaken for a fisherman howling in some sailors language and beleive me that has broken many a potential good relationships.
So just put that all in Plain English.Folks am open to something that is AMD64 Linux and not Ubuntu ( or non Buntu/ Debian ) also . Any insight there would help me.
Can these problems be fixed in Arch Linux.
Some specific Q's are
<> Can I somehow PORT and USE Debian Packages in Arch . How do I do this ..?
<> When you download Skye for Linux there is no 64 Bit AMD version but they have got specific ones for Mandiva, Buntus etc.
WHICH version fits ArchLinux ?
<> How has the user exp been with Skype on Arch Linux
<> When I tried to install Arch , I dropped to a vanilla root prompt. Now do I have the BUILD the OS all by myself , or once I install it , it will install the core packages for the GUI , Office, Networking etc
Please gimme some approach .
Thanks
Sam
Thanks
Sam

sieger007 wrote:
Can these problems be fixed in Arch Linux.
Thanks
Sam
Short answer:
Yes.
Clarification:
It can be fixed whatever distro you use, as well.
Long answer:
Without trying to be presumptive of your use-patterns and system-admin habits, I'd venture to say you take a more problem-solving approach to your system, basically "this is not working, how do I fix it". While this is to the point, when using Linux in general (and especially so for Arch), you're going to have to do more than that, and insert a 'why' somewhere. For example, just skimming through your list of issues, I can clearly see Pulseaudio-related stuff, but since you do not mention Pulse specifically, I'm pretty sure your efforts to solve that have not gotten to the root cause. So, while these 'problems' CAN be fixed when you use Arch, they won't if you don't fix them, or at least understand them so you don't get those problems in the first place. A popular line round here is "Arch is what you make it", and that's very true, even from a maintainability point of view.
Lastly, with your list of 'bottomline', I'd really suggest not using AMD64. The extra 1 GB of RAM you get is not worth the hassle of running a multi-lib/chroot system which adds a layer of complexity. Your usage as mentioned also will not get close to touching 4 GB RAM anyway. Of course, if you take that approach further, I'd actually recommend Ubuntu as being easier to use, once you get past the 'I HAVE to get the latest alpha koala' syndrome. Or even Windows XP with free software.

CS5: Why do I need 2 places to define the Chapter Number style?

Hello,
I was wondering, when I use Chapter Number via the text Variables, I can define the nubers style over there, but I can also define it via Numbering and Sections options.
Why do I need 2 places to define that?
thanks,
shlomit

Hello,
I was wondering, when I use Chapter Number via the text Variables, I can define the nubers style over there, but I can also define it via Numbering and Sections options.
Why do I need 2 places to define that?
thanks,
shlomit

I need some direction to select the right DR to install Catalog

I just got LR 2. and I'm at a crossroad not sure which way to go. This is my current situation:
I am have a Mac 10.5 and use mostly Ext HDs, except for Apps that I run using the Int. HD. I have about 175 GB worht of images.
I have the following Ext HD:
1- 1 TB - 550 GB avail. (fw) I am using it as my primary Data, and back up drive
2- 500 GB (USB) - 346 GB avail - as secondary back up drive
3- 350 GB (USB) -198 GB avail - as third back up copy.
However, I am not sure if this is the right way to go since I'd like to keep 2 back up copies of all my images, in addition I would like to install LR Catalog on one of the Ext HD, as well as, backing up LR using one of the Ext HD. I have read that it's best to use the fastest DR to install the Catalog
So my questions is which Dr. should I install the Catalog?
Which DR do I set LR's back up (catalog not images)?
Which DR do I set as the primary one to use while using LR?
Another thing I'm not quite sure if I should even try to use TM since I read that it's not recommended to use while using LR.

Thanks Nicola
I think we both are in agreement and thank you for confirming it . Now comes the heavy task of removing and reformatting the drives yikes. So you think that buy installing the catalog in the Int HD it will not take a lot of room?
I am aware that I will importing the images (as reference) so they will be stored on the FW HD, so the command for any alteration on the images would not take a lot of space on the DR?
McPhotoman
I have another question about TM, how you made your selection for the destination DR to put your TM backups? Do you have a dedicated DR or have other stuff there as well.
Are you telling me that I could excluded "the catalog" in the TM preference while I am setting it up
I have no experience with TM and to be honest I'm confused. I'm not sure if I should dedicated a DR solely for TM

Need to display data on the right side in the header area of alv report.

hi experts,
                   I want to display data in the header area of alv report on the right side . I have already used function for events on the header side data is getting displayed on the left side .but i want data to be displayed on the right side.
regards,
andrews.

Hi,
Hope this below code helps you.
Take care,
Çağatay.
* build header for alv
FORM top_of_page_split USING r_top TYPE REF TO cl_dd_document.
DATA: s_tab TYPE sdydo_text_table,
      c_area TYPE REF TO cl_dd_area,
      text TYPE sdydo_text_element.
TYPES: BEGIN OF tab_text,
text TYPE sdydo_text_element,
END OF tab_text.
DATA: i_text TYPE TABLE OF tab_text.
DATA: w_text TYPE tab_text.
CALL METHOD r_top->initialize_document.
CALL METHOD r_top->vertical_split
EXPORTING
split_area = r_top
split_width = '70%'
IMPORTING
right_area = c_area.
CONCATENATE sy-datum+4(2)
sy-datum+6(2)
sy-datum(4)
INTO date1.
CONCATENATE 'DATE' date1
INTO w_text-text
SEPARATED BY ':'.
APPEND w_text TO i_text.
CONCATENATE 'time:' sy-uzeit INTO w_text .
APPEND w_text TO i_text.
CONCATENATE 'uesr:' sy-uname INTO w_text .
APPEND w_text TO i_text.
CONCATENATE 'local date:' sy-datlo INTO w_text .
APPEND w_text TO i_text.
CONCATENATE 'time zone:' sy-zonlo INTO w_text .
APPEND w_text TO i_text.
s_tab[] = i_text[].
CALL METHOD c_area->add_text
EXPORTING
text_table = s_tab
fix_lines = 'X'
sap_fontsize = cl_dd_document=>medium
sap_emphasis = cl_dd_document=>strong.
CALL METHOD r_top->add_gap
EXPORTING
width = 60.
text = 'THIS IS REPORT HEADING'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'STRONG'.
CALL METHOD r_top->new_line.
CALL METHOD r_top->add_gap
EXPORTING
width = 70.
text = 'THIS IS REPORT HEADING1'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'STRONG'.
CALL METHOD r_top->new_line.
CALL METHOD r_top->add_gap
EXPORTING
width = 80.
text = 'THIS IS REPORT HEADING2'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'STRONG'.
CALL METHOD r_top->new_line.
text = 'Report Subheading1'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'NORMAL'.
CALL METHOD r_top->new_line.
text = 'Report Subheading2'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'NORMAL'.
CALL METHOD r_top->new_line.
text = 'Report Subheading3'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'NORMAL'.
CALL METHOD r_top->new_line.
ENDFORM. "TOP_OF_PAGE_SPLIT

Need some advice on choosing the right iPad

My wife has been dropping some subtle hints that she'd like an iPad for Christmas. I'm playing dumb for the time being so she'll be surprised when the time comes but I'm forced to admit that I'm a bit ignorant when it comes to choosing the right model for her. She wants one specificaly for pictures,but will probably also use it for downloading audio books, e-mail and web. While I'd like nothing more than to be able to afford the latest and greatest, cost IS a consideration so I'm looking at used & refurbished 2's in the $300-$350 range; maybe a 3 if I can make it fit the budget.
Of the older generations out there, which one has the better camera and would I better off with a 64 gig rather than a 32?

What are all the differences between the iPad 3rd Gen and the iPad 2? Is the iPad 2 worth the cost savings?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -2012-ipad-2-2011.html
What are all the differences between the iPad 3rd Gen models? Which should I buy?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -early-2012-models.html
Should I Buy a New iPad? Or an iPad 2?
http://www.maclife.com/article/blogs/should_i_buy_new_ipad_or_ipad_2
iPad 3 vs iPad 2 vs iPad 1- Feature comparisons with iOS 5
http://ipadhelp.com/ipad-help/ipad-3-vs-ipad-2/
iPad Q&A
http://www.everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd -gen-early-2012-models.html
A Few Questions (and Answers) About the New iPad
http://pogue.blogs.nytimes.com/2012/03/15/a-few-questions-and-answers-about-the- new-ipad/?ref=personaltechemail&nl=technology&emc=edit_ct_20120315
New iPad: A Polishing of the Old
http://www.nytimes.com/2012/03/15/technology/personaltech/the-new-ipad-is-much-t he-same-only-better.html?nl=technology&emc=edit_ct_20120315
iPad 1, 2 and New Specifications
http://www.everymac.com/systems/apple/ipad/index-ipad-specs.html
16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
If you think you may get an iPad 2:
Refurbished iPad Prices
http://store.apple.com/us/browse/home/specialdeals/ipad
New 16GB iPad 2 Prices
http://store.apple.com/us/browse/home/shop_ipad/family/ipad/select_ipad2
When iOS 6 comes out in the fall, the iPad 3 will get Siri, but the iPad 2 won't.
 Cheers, Tom

UL with nested UL needs to 'fly out' to the right.

I've created a site for our office and only seem to have one sticking point. The owner wants the left nav to display the submenus only when the "for sale" or "for rent" are hovered over.
I am nearly there, but I can't get the sub menus to have any functionality to display on hover.
Your time is important, so I'll gladly take a link to a tutorial or article in order to learn what I need to know for getting the nested UL to display on hover. I have really researched it before posting this question. I did find a great video on do EXACTLY what I need, only it is with a horizontal menu. Here's the video: Here's the video
I have also used a super book by Greg Rewis called Mastering CSS to get past this hurdle.
Here's the link to my site with the UL as the left nav: click here
Thank you for your time looking at this, and I hope I can offer some tips in return. I'm using the CS3 Design Premium on a HP pc.
Rob Cookenour, Tennessee
p.s. here's the UL as you'll see on the site:
<ul>
<li><a href="index.html">Home Page</a></li>
<li><a href="#" class="MenuBarItemSubmenu">For Sale</a>
<ul>
<li><a href="residential_condo_1.html">Residential / Condo</a></li>
<li><a href="commercial.html">Commercial</a></li>
<li><a href="land_lots.html">Land/Lots</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu" href="#">For Rent/Lease</a>
<ul>
<li><a href="rent_lease.html">Homes</a> </li>
<li><a href="rent_lease_apts_condos.html">Apts / Condos</a></li>
<li><a href="rent_lease_commercial_office.html">Commercia l / Office</a></li>
<li><a href="rent_lease_vacation.html">Vacation</a></li>
</ul>
</li>
<li><a href="MLS Search Frameset.html">Property Search</a></li>
<li><a href="divisions.html">Divisions</a></li>
<li><a href="../projects/index.html">Projects</a></li>
<li><a href="../aboutus/index.html">About Us</a></li>
<li><a href="meet_the_staff.html">Meet The Staff</a></li>
<li><a href="../Portfolio/index.html">Portfolio</a></li>
<li><a href="careers.html">Careers</a></li>
<li><a href="contact_us.html">Contact Us</a></li>
<li><a href="links.html">Links</a></li>
<li><a href="../Press Room/index.html">Press Room</a></li>
</ul>

Hi
You do this using css, first enclose your menu in a div with the id of navigation then include the following in your css, (the position of the sub-menu must be altered to suit.
#navigation ul li > ul {          /* using the > selector prevents many lesser browsers (and IE - see below) hiding child ULs */
display: none;               /* hides child menu blocks - one of the most important declarations */
position: absolute;          /* make child blocks hover without leaving space for them */
#navigation ul li:hover, ul {
    color: #00F;                 /* makes the active menu item text black */
#navigation ul{     /* must not be combined with the next rule or IE gets confused */
display: block;              /* specially to go with the className changes in the behaviour file */
#navigation ul li:hover > ul {    /* one of the most important declarations - the browser must detect hovering over arbitrary elements
                                  the > targets only the child ul, not any child uls of that child ul */
display: block;              /* makes the child block visible - one of the most important declarations */
#navigation ul li:hover > ul li {    /* one of the most important declarations - the browser must detect hovering over arbitrary elements
                                  the > targets only the child ul, not any child uls of that child ul */
display: block;              /* makes the child block visible - one of the most important declarations */
margin: 1px 25px;     /* change to alter position of sub menu */
width: 10em;
PZ

Error "need to place tarball in the right location" jre & jdk upgrade

Similar Messages

Maybe you are looking for