Error "No entry in table T551A" while creating set work schedule rule.
Dear Team,
I am getting following error while creating set work schedule rule.
Error "No entry in table T551A" for key 22 BBB [ here BBBB is my period work schedule]
The actual prob is i configured all the necessary steps but when i tried to create work schedule rule im getting this error. Also, in the same screen there is one field DWS grouping initially value in this is 00 and gread mode. But after giving ES grp, holiday calander ID etc etc when i try to save that screen that value is chainging to 22 from 00.
My ES grop=2 and PS grop=2 . Is that value is my ES and PS grouping..?? or some other thing.
Request you to please help me out.
Regards
Shab.
HI, there are 8 steps you need to do below:
1. Group Personnel Subareas for the Daily Work Schedule
2. Group Personnel Subareas for the Work Schedule
3. Define Break Schedules
4. Define Daily Work Schedules
5. Define Period Work Schedules
6. Define Employee Subgroup Groupings
7. Define Groupings for the Public Holiday Calendar
8. Set Work Schedule Rules and Work Schedules
All of them belong to TIME MANAGEMENT. I think you miss some steps above.
Please check it again.
Regards!
Minh
Similar Messages
-
Iam getting error "No entry in table T7INA9" while updating 0008 Infotype.
Dear Gurus,
Whenever i am updating Basic pay infotype i am getting the error "No entry in table T7INA9". Wage types are displaying in the basic pay infotype but amount is not updating. whenever i am entering the amount and pressing enter. the amount is getting erased and its showing following error. Please help
points are awarded according to the reply. Please help me
Regards,
RaviYou have to maintian these view V_T7INA9
for your wage type .. as this programs checks the eligibility criteria for Reimbersment , allowances and perks if any ..
if not then .. mention as no check needed - and maintain as blank .. your information will be get stored in the IT 8
Thanks and Regards
Jaydeep jadhav -
No entry in table T551A for key 40 GENR
Hi Guys,
Can anyone please tell me what is the meaning of this error.
"No entry in table T551A for key 40 GENR"
I am getting this error while i m trying to set work schedule rule.
Thanks
Deepali
Edited by: DeepaliHCM on Jan 28, 2010 10:27 AMDWS grouping , PWS grouping are connected to each other and when you create any work schedule it will get feched from different tables .. if there is no relavancy in the primary keys ,,, here it is 40 then it will throw this error
please write down on paper whatever grouping you are maintaning in TM configuration ... and check where revancy is missing
and i think maintaining it on paper for your better reference will not eat your more time -
Define Work Schedule Rule when Period Work Schedules are created
Experts:
I am trying to configure a DWS and PWS for a given plant. I am aware from a different network thread that this is a 11 step process. I have created the following:
PSG= 03
DWS = 1
Breaks were defined
Created DWS of 1stI, 2ndI, and WNDI (ist shift, 2nd shift, and weekend shift)
Verified day types are correct
Created the following period work schedules:
WK 1 2 3 4 5 6 7
1STI 1 1STI 1STI 1STI 1STI 1STI FREI FREI
1STI 2 1STI 1STI 1STI 1STI 1STI FREI FREI
1STI 3 1STI 1STI 1STI 1STI 1STI FREI FREI
1STI 4 1STI 1STI 1STI 1STI 1STI FREI FREI
2NDI 1 2NDI 2NDI 2NDI 2NDI FREI FREI FREI
2NDI 2 2NDI 2NDI 2NDI 2NDI FREI FREI FREI
2NDI 3 2NDI 2NDI 2NDI 2NDI FREI FREI FREI
2NDI 4 2NDI 2NDI 2NDI 2NDI FREI FREI FREI
WKDI 1 FREI FREI FREI FREI WNDI WNDI WNDI
WKDI 2 FREI FREI FREI FREI WNDI WNDI WNDI
WKDI 3 FREI FREI FREI FREI WNDI WNDI WNDI
WKDI 4 FREI FREI FREI FREI WNDI WNDI WNDI
How do I define the rules to determine variant for monthly work schedule rule generation??
I am aware that X stands for that it is relevant to the calendar and that 1 = Monday - 7 = Sunday.
Can someone help define the work schedule rules I need and what each code means??
Thanks,
BobbieHi Bobbie,
1 . By Using variants you can make changes in normal working timings.....and these changes made in Table V_T550X...conditions can be applied by using
......... Holiday Class
......... Holiday Class for the next day
......... Weekday
......... Variant
Holiday Classes :
Blank stands for -
Not a public Holiday
1 stands for -
Public Holiday
2 Stands for -
Half day Holiday
3-9 stands for -
Customer specific Public holiday Classes
Variants of daily work schedule Selection rule 01 stands for :
--- Standard variant Blank
--- variants A for work on Fridays
Variants of daily work schedule Selection rule 01 stands for :
--- Standard variant Blank
--- Variant A Work on Friday
--- Variant B work on Public Holidays of Public Holiday Class 2
--- Variant C work on days preceding Public Holiday Class 4
For ex: if ur company wants to treat second week of Saturday is half day holiday for employees..then u can do this by fulfilling the fallowing conditions..
... Select holiday class 2 in Holiday Class field by putting X
... Holiday Class for the next day select each holiday class
--- Weekday - select workday as Saturday (6)
......finally create daily work schedule and attach the daily work schedule variant to Daily work schedule (V- T550X to V-T550A)..then u assign ur daily work schedule to period work schedule,period work schedule to work schedule....
.......You can configure these rules for any type of weekdays or weekends ...its depends on the requirement of client to client
........X represent applicability of holiday class in Holiday class and Holiday class next day & weekday...
2 . Come to selection rule.....In selection rule u can treat ur holiday class by using day type...ex ....if u want ur managerial category people won't get paid if they work on public holidays or Sunday...u can do this by using selection rules...
3 . Personnel Time Management :
--- Work Schedules
--- Define Public Holiday Class
Personnel sub area grouping for the work schedules and daily work schedule
daily work schedule .... Break schedule , Define rules for variants & daily work schedule
Define Period work schedule
Day types - Define day types,selection rules & Special days
Work schedule rules and work schedule
.... Define employee sub group grouping and groupings for public holiday classes
.... Set work schedule rules and work schedules
.... Generate work schedules
Please take care of the grouping...
i think now u could the understand the concept now ....
Thanks & Regards,
Avanthika.k -
Error "No entry in table T589A for P" while creating new Infotype
HI,
I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
"No entry in table T589A for P"
Any input will be highly appreciated.
Thank you,
Farooq.Hi Farooq,
Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
Regards,
Shrinivas -
ORA-23324: error ORA-12541: TNS:no listener, while creating deferror entry
I need Help for the following error message while pushing the dererred transactions from the snapshot to Master in advanced replication.
The Snapshot site has some deftran which supposed to propagate daily push.
SQL>
SQL> -- push existing transactions
SQL> declare
rc binary_integer;
begin
rc := dbms_defer_sys.push('XXXX.WORLD');
dbms_output.put_line(to_char(rc));
end;
declare
ERROR at line 1:
ORA-23324: error ORA-12541: TNS:no listener, while creating deferror entry at
"XXXX.WORLD" with error -12541
ORA-06512: at "SYS.DBMS_DEFER_SYS", line 1716
ORA-06512: at "SYS.DBMS_DEFER_SYS", line 1804
ORA-06512: at line 4
Thank you in advance.The Listener in SNAPSHOT server and the MASTER server - started
I can do the same from different country of the other server with the same tnsname works.
But only this perticular site have issues since Oct 27, 2011 onwards. The last successful replication from that snapshot site to master is on Oct 27, 2011.
I can connect to the SNAPSHOT Site and from there i can connect to the master using any profile to the master.
But only when i replicate from the snapshot site using the script then i am getting this 12541 no listener error
Please help.
Thank you, -
Tables updated while creating order, before saving
hi friends,
Please provide list of tables updated while creating the order, before saving it.
regards,
vandana aroraHi
The following tables get updated
VBBE - Sales Requirement
VBLB - Release Order Data
VBAK - Sales Document Header
VBPA - Partner Table
VEPVG - Delivery Due Index
VBAP - Sales Document Item Data
VKDFS - SD Index: Billing initiator
VAPMA - SD Index: Order Item by Material
VAKPA - SD Index: Order Item by Partner Function
VBEP - Schedule Line
VBKD - Sales Doc: Business Data
VBEH - Schedule Line History -
Payroll error: No entry in table T549A for key
Hi whilw running payroll, there is a error
No entry in table T549A for key
what could be the possible reason. there are 2 payroll areas one for monthly and the other for semi monthly. this is for semi monthly. monthly is running fine.
-request help on thisHi,
Go to the perticular table and check whether you have maintained any entries for Payroll area and date modifier for semi monthly period parameter also check whether run payroll bos is checked or not.
Regards -
BOM editing should not be allowed while creating P.O./ Scheduling agreement
BOM editing should not be allowed while creating P.O. / Scheduling agreement
Hi,
I think that when you create a subcontracting PO it READS the valid BOM, so there's no locking. From a business point of view you need to question such a requirement, since in SAP you can have many kinds and types of BOMs. Then what if one of the BOMs is open in change mode (edited) exactly when you try to create the order? It should not allow you to create the order? Why?
Regards,
Mario -
I am getting Payroll error in "Customizing Error in Work Schedule Rule"
Hi,
Iam using SAP HR ECC6.0. While running payroll i am facing an error saying "Customizing Error in Work Schedule Rule". I checked all my work schedule related configuration everything is correct. I have checked the Manual Work Schedule Creation. My Work Schedule is getting displayed for current year. Can anyone help me out in this.
LakshmiHi Naveen,
How are you? I created the work schedule again and checked both Infotypes 0007 and 0001. My grouping is there. But now i am getting error saying "Payroll not possible because data is missing. No entry in Table WPBP". But i checked in SM30 there is no such table in the directory. I really don't know what kind of error is this?
Lakshmi -
Customizing error in work schedule rule 2 D2 40 RRTHOLR2
Hello Experts,
While simulating payroll , I am getting this error.
Customizing error in work schedule rule 2 D2 40 RRTHOLR2
esgrouping - 2
Holiday Calender - D2
Personnel Sub area grouping - 40
WSR - RRTHOLR2
my dws are starting with 1.4.2004
my pws are starting with 1.4.2004
my calender is between 2004-2015
and created Work schedule for 2004-2015
still getting the same error
Will you please help me out to solve this ?
Thanks And regards
Jaydeep JadhavHi All,
I too faced the same type of error. Below are the steps for the solution.
1. The error comes due to retro run with incorrect workschedule rule in IT0007.
2. You can check table V_T508A or V_001P_ALL to view the complete groupings of your personnel area/subarea,workschedule rule, Holiday cal,
3. Copy the existing record of IT0007>give the retro effective period as start date and enter the end date>select the populated workschedule rule from the drop down option-->save the record.
4. Run the psyroll in simulation mode and check the status.
Hope it may help you..
Best Regards
Satya -
How to fix an error (related to work schedule rule) in Time evaluation ?
Hi experts,
I am getting an error while running time evaluation - PT60.
Find the log
Log:TimeEvaluation General data
Schema ZM04 Time Evaluation Without Clock Times
00753402 Christoudas Natalie
Customizing error in work schedule rule 1 VM 01 5MTWTF Person rejected: 00753402
How to fix it? Its urgent.
Be assured of points for useful answers.
RajeshHi All,
I have checked work schedules and work sc. rules. everything looks fine. Reason being fine, same work schrdule rule, i.e. 5MTWTF is used for other employees, whose payroll area, personnel area, personnel subarea, employee group and employee subgroups are same.
Why it is throwing error for one employee 753402.
I am providing you more information. In table V_T569r, if u select recalculation category as time evaluation, it is mentioned as 01.01.2003. Initially, one action called "Conversion take on" has been maintained as on 01.03.2002, where employee had payroll area -99 (payroll irrelevant) and personnel subarea - DAYY.
Then on 17.03.2008, another action ran "Conversion initial reassignment" where payroll area changed to "MT - monthly", subarea changed to DAYF. At that time PDC recalculation date in infotype 0003 was 01.03.2002 which was before recalculation date, i.e. 01.01.2003.
Time evaluation was throwing 2 error messages. one was solved by changing PDC recaluation date to 17.03.2008. But other error related to work sc rule 1 VM 01 5MTWTF still occurs.
Can some body now provide some useful information?
Thanks
Rajesh -
The Question about mess "Customizing Error in Work Schedule Rule ..."
Dear all,
I run the Start-Payroll and I getting an error " Customizing Error In WSR for that Personal Number"
I configuration all of Time Management with start date is 01.01.2000 and when I run Payroll on Payroll period is 01/2000 with start date is 01.01.2000 to 31.01.2000 for Employees hiring on 01.01.2000 then I have an error " Customizing error in work schedule rule .. .. ... ..".
But I can run the payroll period on 02/2000 with start date is 01.02.2000 to 29.02.2000 for Employees hiring on 01.02.2000. form 02/2000 it is okies.
Please help me solve about my problem
Thank for your answers
Regds
Huyen NguyenCustomizing Error in Work Schedule Rule
where are u getting this error
if it is PY log
Check GENPS this error will come under this Function
it is the combination of
ur Holiday calendar
Employee Sub Group
Personal Sub area Grouping
and ur Daily work Schedule Rule
Check the Start dats an end dates fo all the above Settings along with their Groupings in table V_T508A -
Customising error in work schedule rule
Hi All,
While running the TM schema TM04, i am getting "customising error in work schedule rule".
I could successfully generate work schedule with the same work schedule rule for the period 01-2006 to 01-2008.
I have configured all the nodes under work schedule. I have maintained payroll control record with retro accounting date as 01-2006 and the payroll date as 02-2006(i.e i released the payroll for run, so period got incremented).
In 0003, i have given TM status as 9.
I want to know if i missed anything in configuration. Can you please help me in this regard.
Thanks,
RaviHi Ravi,
You can also maintain the feature TIMMO.. the return value of this feature is Country Grouping..
You need to select the relevant country grouping and give the same as return value and activate the feature.
Regards
<u><i><b>Sam</b></i></u>
<i><b>Reward the points if my answer helps you out</b></i> -
Looking for an app that is easy to create a work schedule on PC and download to phone.
We have a small group of managers who have blackberry's and were wondering if there is an app that would allow us to easily download our individual schedules to our phones. We currently use excel to create the work schedule and even though we can view it through email it would be nice be able to plug it in with our calendars. Any help would be Great!
Are you all using BES or BIS? If you're not on a BES then you can use a program called Google Sync. If you all have a gmail account you can use this program to wirelessly sync between your BlackBerry calendar and Gmail calendar. Read more about it here
http://www.google.com/mobile/blackberry/sync.html
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.
Maybe you are looking for
-
Not able to get the alarms in DFM from 7609-S router in LMS 4.0
Hi Team, We are facing some problem with DFM alerts for SPA-4XOC3-POS modules. Alerts are not getting generated for these modules. I can the the modules in Cisco View and inventry. Its operation status is also UP. Please provide help to find out the
-
Pass blank value to a parameter
Hello Experts I am using Crystal Reports 2008 with SAP BW as a data source. SAP query has a string parameter created in it, and I want to apply condition on that parameter. If user enters a value which is not in that parameter (field) then report sho
-
I have 2 iPhones using the same itunes on one computer, how do I sync each
I have 2 iPhones using the same itunes on one computer, how do I sync each one separately and how do I sync my outlook contact separately.... please help
-
Paragraph palette is blank?
Why is my paragraph palette blank in CS3? For some reason I cant seem to get the paragraph palette to display the normal format options. I have the paragraph format options in the top menu but would like to have them in the palette. any ideas how to
-
Is there an app which will sync bookmarks in Saferi Touch w/ Firefox on an iMac?