Error no logical path has been specified
iam transfering inventory balance using standard object goods movement by direct
input method .when iam uploading file at step 7 specify files iam getting error as
no logical path has been specified.can someone answer for this error
As find in forum -
You just put any, not used logical file name in your file definition step. LSMW will create this logical file byself und will use when is needed, but you just forget about it in future. Don't forget to recreate this file, when you move your LSMW to test and production systems, it is not created automaticaly there.
The way you enter logical path and logical name is,
Within the LSMW option 'Specify Files', Double click on
'Converted Data' and a popup box will allow you enter
file name , logical path and logical file.
Re: LSMW : Unable to Specify Files . Logical path incorrect ?
Hope this may help you.
Regards,
Amit
Similar Messages
-
LSMW No logical path has been specified
Dear All,
I am trying to create characteristic through LSMW. in the Specify file step i am geeing this error"No logical path has been specified".
Any body can have idea about the error?
Regards
DhirenHi Dhiren,
I have the same problem. I am trying to change a batch characteristics and I am getting the same error.
Could you please share how you resolved your issue?
Regards,
R.S
This is a old and answered thread - please open a thread for your specific query.
-Paul
Moderator
Edited by: Paul Meehan on Aug 25, 2011 11:39 AM -
LSMW - Logical Path/File - No logical path has been specified
Hello,
I am trying to create a LSMW with the RM06EEI0 direct input program for ME21N transaction.
At the SpecifyFiles step I get the error message "No logical path has been specified".
My dilemmas are:
1. How can I solve this error? Is the FILE transaction only solution? If yes, where and how I must define the logical path/file?
2. Why in the case of the Batch Input Recording LSMW Method this files are created automatically? (I can see them in the AL11 transaction and I didn't define them by myself).
3. Why on other system this error is just an warning message? If you look at this tutorial http://****************/Tutorials/LSMW/PO/Page4.htm at Step7.g. you can see that there is no need of defining the file/path in FILE transaction.
More info about the system I am working in:
SAP ECC 6.0.
LSMW 4.0.0. Version.
Thank you.
DanielaHi
Refer the oss note 753511 released for this kind of error you face in LSMW, I am pasting the content of the note below,
******************Note Content,
Symptom
The system issues an error message for the logical path or file when you perform the "Specify files" step in the Legacy System Migration Workbench (transaction LSMW) although you have made the correct assignment in transaction FILE.
The error messages are as follows:
The logical path <PATH> does not point to the physical directory.
The logical file <FILE> is not assigned to the physical file.
or
A logical path was not specified.
Other terms
Logical path, logical file, transaction FILE, LSM Workbench
Reason and Prerequisites
Some import interfaces that you can also use with transaction LSMW work with logical path and file names.
Transaction LSMW itself, however, works with physical file names. To be able to transfer the LSMW file with the converted data to the import program, you must specify a logical file name for the file with the converted data in addition to the physical file name. In this case, the system displays additional fields in the 'Specify files' step in which you must enter the logical path and file name.
Solution
The error messages may be due to several causes. Check the following:
Have you maintained the logical path and logical file name and have you assigned them to the physical file specified in the "File" input field of transaction LSMW?
These settings are maintained in transaction FILE.
When you use logical file and path names, you must specify the name of the physical file with its path. If you have not specified any directory, you cannot assign any directory to the logical path in transaction FILE. In this case, the system uses the SAP Home directory on the application server by default. Bear in mind that the file name must not exceed the maximum length of 45 characters, including the path.
Up to LSMW version 1.7.2 (*):
If the logical file name specified does not point to the physical file (although it should do), the system adjusts the logical file name, that is, the information in transaction FILE is changed to the entries made in transaction LSMW. This may lead to unwanted side effects if the logical file is also used somewhere else. Therefore, SAP recommend that you always use separate logical paths and file names for transaction LSMW (the problem is corrected as of LSMW version 1.8.0, see below). If the logical file does not exist yet, it will be created upon request.
As of LSMW version 1.8.0 (*):
The settings of the logical file are checked but no longer adjusted automatically as in version 1.7.2 (see above). If there are inconsistencies, the system issues an error message. If the user is authorized to maintain logical paths and file names (as for transaction FILE: "Maintenance authorization for cross-client tables"), transaction LSMW can create the logical path, the file name and the file. Due to this automatic generation, the user no longer needs to make adjustments in transaction FILE. Therefore, we especially recommend this procedure.
To display the version of transaction LSMW, select "Extras" --> "Display LSMW version" in the main menu of the initial screen.
You should also bear in mind that as of Basis Release 6.20, that is, as of LSMW version 4.0, transaction LSMW is no longer an add-on but is delivered with the standard system.
Hope this helps,
Sunil -
Why does it show "No logical path has been specified" in LSMW
When I specify files in LSMW, save, the systems always shows "No logical path has been specified". I heard it need to config logical path in 'File', but I don't know how to cofig it? Any people can tell me? Thanks a lot!
Hi,
This path of the file names is in the following format:
Projectname_Subprojectname_Objectname.lsmw.read
Projectname_Subprojectname_Objectname.lsmw.conv
You can change this path manually in the following way
click on imported data or converted data
clickon change entery button (Ctrl + F8)
you will find this path in edit mode.
here you can adjust it's length by removing some words from the project,subproject,object name.
Regards,
Amol -
No database connector has been specified - Error code:-2147467259 error
Hi,
Iu2019m trying to populate a report and preview it using JRC. Iu2019m using the JRC jar files versions from CR XI R2 SP4. I have created a report using locale data source xml file and scheme file. I can preview the report from Crystal Report Designer without any probelm. When I try to preview the same layout using my Java application I get the error " No database connector has been specified.---- Error code:-2147467259 Error code name:failed " when I try to set the table location (reportClientDoc.getDatabaseController().setTableLocation(tables.getTable(i),table);) I even get this when I try to set the date source (reportClientDoc.getDatabaseController().setDataSource(xmlDataSet, " FND_SESSION_REP/FNDSESSION", "FND_SESSION_REP/FNDSESSION");) I tried shifting the order of setDataSource and setTableLocation but that didnu2019t help as well.
Can you please help me?
Thanks you in advance.
Regards,
Chanaka
Code to set connection info
public void setDBLogonXML(String xmlFilePath, String xsdFilePath)
final String SERVER_TYPE = "XML";
final String CONVERT_MULTIVALUE_TO_TABLE="false";
final String DATABASE_DLL = "crdb_xml.dll";
try {
Tables tables = reportClientDoc.getDatabaseController().getDatabase().getTables();
//Set the datasource for all main report tables.
for (int i = 0; i < tables.size(); i++) {
ITable table = tables.getTable(i);
//Keep existing name and alias.
table.setName(table.getName());
table.setQualifiedName(table.getQualifiedName());
table.setAlias(table.getAlias());
//Change connection information properties.
IConnectionInfo connectionInfo = table.getConnectionInfo();
//Set new table connection property attributes.
PropertyBag propertyBag = new PropertyBag();
propertyBag.put("Server Type", SERVER_TYPE);
propertyBag.put("Database DLL",DATABASE_DLL );
propertyBag.put("Local XML File",xmlFilePath);
propertyBag.put("Local Schema File",xsdFilePath);
String conString = "Local XML File=s("+xmlFilePath+");Local Schema File=s("+xsdFilePath+")";
propertyBag.put("Connection String",conString);
connectionInfo.setAttributes(propertyBag);
table.setConnectionInfo(connectionInfo);
//Update old table in the report with the new table.
reportClientDoc.getDatabaseController().setTableLocation(tables.getTable(i),table);
catch(ReportSDKException ex) {
System.out.println(ex);
catch(Exception ex) {
System.out.println(ex);
Main programu2026..
setDBLogonXML("D:\\Reports\\Current Sessions.xml","D:\\Reports\\FndSessionRep.xsd");
xmlDataSet = new XMLDataSet(new ByteArray(xmlFile), new ByteArray(xsdFile));
reportClientDoc.getDatabaseController().setDataSource(xmlDataSet, "FND_SESSION_REP/FNDSESSION", "FND_SESSION_REP/FNDSESSION");
Error Stack
- JRCAgent1 detected an exception: No database connector has been specified.
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
at com.crystaldecisions.reports.sdk.DatabaseController.setTableLocation(Unknown Source)
at jrc_xml_test_app_01.testDlg.setDBLogonXML(testDlg.java:378)
at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:117)
at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:5501)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
at java.awt.Component.processEvent(Component.java:5266)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3968)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
at java.awt.Dialog$1.run(Dialog.java:525)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: No database connector has been specified.---- Error code:-2147467259 Error code name:failed
- JRCAgent1 received request: setDataSourceRequest
- command SETUP: Create Data Connection
- command PERFORM: Create Data Connection
- -- command is undoable -> purge redo stack
- command SETUP: Set Data Connection Property
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: No database connector has been specified.---- Error code:-2147467259 Error code name:failed
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
- command PERFORM: Set Data Connection Property
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
- -- command is NOT UNDOABLE -> purge undo stack
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
- --- Purging command Create Data Connection
at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
- command SETUP: Set Data Connection Property
at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
- command PERFORM: Set Data Connection Property
at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
- JRCAgent1 detected an exception: No database connector has been specified.
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:121)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Unknown Source)
at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:121)
at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:5501)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
at java.awt.Component.processEvent(Component.java:5266)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3968)
at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:5501)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.processEvent(Component.java:5266)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.Component.dispatchEventImpl(Component.java:3968)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.Dialog$1.run(Dialog.java:525)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.Dialog$1.run(Dialog.java:525)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
No database connector has been specified.
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)Post Author: ililal
CA Forum: Data Connectivity and SQL
I spoke directly with Business Objects. They said,"Sun Application Server 8.2 is not supported." -
Error: "a summary has been specified on a non recurring field"
Hi,
I have a formula which calculates a quantity amount based on different quantity types & finally sums all the quantity to give a
result, tis result i want to show in crystal report, This field is put in report footer, when i try to run the report i get the following error for that field 'a summary has been specified on a non recurring field' below i put my formula:
//sum for qty type Fuel
numberVar qtyFuel;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '01'
then
qtyFuel := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type Inventory
numberVar qtyInventory;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '03'
then
qtyInventory := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type Non Sales
numberVar qtyNonSales;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '04'
then
qtyNonSales := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type Sales
numberVar qtySales;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '05'
then
qtySales := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type Enhanced Recovery
numberVar qtyEnhancedRecovery;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '14'
then
qtyEnhancedRecovery := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type Load Oil Sales
numberVar qtyLdOilSales;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '08'
then
qtyLdOilSales := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type receipt
numberVar qtyReceipt;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '13'
then
qtyReceipt := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
numberVar Total_Production;
//summing all quantity types
Total_Production := qtyFuel + qtyInventory + qtyNonSales + qtySales + qtyEnhancedRecovery + qtyLdOilSales - qtyReceipt;
I want to display the Total_Production in the report.
The formula name is: Total_Gas_Production.
kindly help me in this issue.
Regards,
Deepakis this one formula?
have you tried to run each formula seperatly to check which is the culprit. if you search the web there are some reasons why this could be happening.
generally you should use evaluation times on formulas
are you using manual running totals or this is the entire formula?
try
MANUAL RUNNING TOTALS
RESET
The reset formula is placed in a group header report header to reset the summary to zero for each unique record it groups by.
whileprintingrecords;
Numbervar X := 0;
CALCULATION
The calculation is placed adjacent to the field or formula that is being calculated.
(if there are duplicate values; create a group on the field that is being calculated on. If there are not duplicate records, the detail section is used.
whileprintingrecords;
Numbervar X := x + ; ( or formula)
DISPLAY
The display is the sum of what is being calculated. This is placed in a group, page or report footer. (generally placed in the group footer of the group header where the reset is placed.)
whileprintingrecords;
Numbervar X;
X -
Crystal error: A summary has been specified on a non-recurring field.
Hi,
Im encountering the following error while trying to aggregate a formula field in one of my reports:
"A summary has been specified on a non-recurring field"
The report calls a subreport in the details section which returns a shared currency variable for every record generated. Im capturing this varaiable using a formula field say Temp1 as below,
Temp1
====================
WhilePrintingRecords;
Shared CurrencyVar ExRate;
ExRate
Im using Temp1 in another formula field Temp2 to perform calculation using another formula field as below,
Temp2
=====================
@Temp1 * @Actual
I have to aggregate Temp2 for each group of records the report generates.
But the report isnt letting me do so via the insert menu. On manually adding the sum function in a formula, it says "cannot summarize field". If i add sum(temp2) to an existing formula field on the report, it gives the error 'A summary has been specified on a non-recurring field' while running it.
Have been stuck on this for a while.
Any Pointers will be appreciated.
Thanks
DhirajI"m not 100% sure about the reason behind this but I think it has something to do with the data not being part of the records on the main report. I've come across it many times myself and the only solution I have ever been able to get work it to create my own calculation for the subtotal, insert it in the same section as @Temp2 and indicate to EvalutateAfter(@Temp2).
Hope this helps, rasinc -
No G/L account has been specified for O /USD for the bank
Dear All,
When i run automatic payment using F110 there are an error message "No G/L account has been specified for O /USD for the bank"
What should I do to solve this problem ?
Thank You.
-tweety-Hi,
I think 'o' is your payment method. In automatic payment program, ranking order you given payment method as 'o' and house bank. Check in FI12 for this house bank the gl account attached.
Regards,
Sankar -
How to fix "More than one receiving system has been specified for the BAPI"
Due to patching the HR system I am testing the functionalities in our test environment before patching the production system. When doing a hiring action (in our test environment) I get this error message at infotype 0000 when I try to save:
"More than one receiving system has been specified for the BAPI (AcctngServices, CheckAccountAssignment)"
It is message no. B1811
My first suggestion weas that it could be the presence of dual connections in SALE, but disabling one of them didn't help.
Since the Basis team is currently patching the HR system I wonder if that has any affect that might end out in the above error.
Anyone who can help me out here? Please?Usually, when you have HR and FI on separate boxes, certain FI information (e.g. cost center) do not physically locate on HR box. Instead of replicating these data into HR for integrity check, you have an option (for a few countries) of remotely connecting from HR box to FI to do these checking though BAPI. I think this is the scenario you have (i.e. when doing the hiring, a new ee will be assigned to a personnel area which in turn default a cost center which SAP would need to check for integrity).
Please go into distribution model, and check if for some reason, this is set up to go to to more than 1 destination for HR accounting integrity check.
Rgds.
Edited by: Ted Dinh on Jun 12, 2009 8:55 AM -
No servlet class has been specified for servlet null
Hi,
I�m trying to bend tomcat in my own application. Therefore I�m using the Embedded Tomcat version 5.5.23.
I have started only a server, engine, host and context, so I have a server without the sockets etc. this because it has to become a test-application for the web-app of the company.
The server starts gracefully, but when I call context.invoke(request,response) I get this error:
SEVERE: Allocate exception for servlet null
With this stacktrace:
javax.servlet.ServletException: No servlet class has been specified for servlet null
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1016)
at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:791)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:127)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:870)
at nl.realworks.embedTomcat.EmbedTomcat.invoke(EmbedTomcat.java:74)
at nl.realworks.embedTomcat.StartEmbedTomcat.main(StartEmbedTomcat.java:29)
Exception in thread "main" java.lang.NullPointerException
at org.apache.catalina.connector.Request.setAttribute(Request.java:1383)
at org.apache.catalina.core.StandardWrapperValve.exception(StandardWrapperValve.java:331)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:145)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:870)
at nl.realworks.embedTomcat.EmbedTomcat.invoke(EmbedTomcat.java:74)
at nl.realworks.embedTomcat.StartEmbedTomcat.main(StartEmbedTomcat.java:29)
does anyone has a idea what the cause of this problem is? The request I send is �GET /index.jsp� using a MockHttpServletRequest of the spring framework. I convert the mockhttpservletrequest to a org.apache.cataline.connecor.Request. and that works.
The code in tomcat where the error is caused by:
// Complain if no servlet class has been specified
if (actualClass == null) {
unavailable(null);
throw new ServletException
(sm.getString("standardWrapper.notClass", getName()));
Thanks in advance.
Auke NoppeTobias
Yes , you are correct. We dont need to replicate DDIC tables for direct BW replication. This was the first time we were working with BW on Hana and never installed DMIS component on that system. The error was gone after we put the addon.
Mahesh Shetty -
When I try to buy an album or buy/rent a movie on iTunes Store Argentina it gives me the following error: "Cannot buy/rent (item name here). A duplicate filename has been specified."
Below that it says:"There is an error in iTunes Store. Please try again later."After getting your password reset you might then need to log out of your account on your iPhone by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in so as to 'refresh' the account on it.
-
I have an Script mostly that is generated by SSMS which works with-out issue on SQL Server 2008, but when I attempt to run it on a new fresh install of SQL Server 2012 I get an Msg 8631. Internal error: Server stack limit has been reached. Please look for
potentially deep nesting in your query, and try to simplify it.
The script itself doesn't seem to be all that deep or nested. The script is large 2600 lines and when I remove the bulk of the 2600 lines, it does run on SQL Server 2012. I'm just really baffled why something that SQL Server generated with very
few additions/changes AND that WORKS without issue in SQL Server 2008 R2 would suddenly be invalid in SQL Server 2012
I need to know why my script which is working great on our current SQL Server 2008 R2 servers suddenly fails and won't run on an new SQL Server 2012 server. This script is used to create 'bulk' Replications on a large number of DBs saving a tremendous
amount of our time doing it the manual way.
Below is an 'condensed' version of the script which fails. I have removed around 2550 lines of specific sp_addarticle statements which are mostly just copy and pasted from what SQL Management Studio 'scripted' for me went I when through the Replication
Wizard and told it to save to script.
declare @dbname varchar(MAX), @SQL nvarchar(MAX)
declare c_dblist cursor for
select name from sys.databases WHERE name like 'dbone[_]%' order by name;
open c_dblist
fetch next from c_dblist into @dbname
while @@fetch_status = 0
begin
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 2400 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script =
null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N''manual'', @destination_table = N''TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false'', @ins_cmd = N''CALL sp_MSins_dboTABLE_ONE'',
@del_cmd = N''CALL sp_MSdel_dboTABLE_ONE'', @upd_cmd = N''SCALL sp_MSupd_dboTABLE_ONE''
EXEC sp_executesql @SQL
SET @dbname = REPLACE(@dbname, 'dbone_', 'dbtwo_');
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 140 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''DB_TWO_TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''DB_TWO_TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script
= null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509D, @identityrangemanagementoption = N''manual'', @destination_table = N''DB_TWO_TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false''
EXEC sp_executesql @SQL
fetch next from c_dblist into @dbname
end
close c_dblist
deallocate c_dblist
George P Botuwell, ProgrammerHi George,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here.
Allen Li
TechNet Community Support -
trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"
i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails. -
In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.I have same error except that i get it even when my phone is not connected.
-
Error: no boot disk has been detected or the disk has failed!(pavilion 20)
Error: no boot disk has been detected or the disk has failed!(pavilion 20-b014 . The machine came originally with windows 8. I upgraded to windows 8.1 and put new hard disk. So the hard disk is fine.
However if I turn the machine off for a day and start the next day I get the "Error: no boot disk has been detected or the disk has failed".
I made the hard disk the first to boot the machine will boot and works. Is there a way to upadate the BIOS on
HP pavilion 20-b014? my bios version is 12/4/2012 v.8.09.
I do not understand why the intermittment above error showing on and off.
Please help. ThanksHello @Samya,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your desktop computer is giving you an error message stating that the boot disk could not be detected, and I would be happy to assist you in this matter!
To ensure that your hard drive you computer is trying to boot from is in working order, I recommend following the steps in this document on Testing for Hardware Failures (Windows 8). This should help determine if there is a fault with the hard drive.
If the hard drive passes all of the required tests, I recommend returning the BIOS back to its default settings by following this document on Recovering the BIOS.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!
Maybe you are looking for
-
How can I get and change the items grid of MIRO trx
Hi everyone, I have a requirement where I need to get and change the tax code field in MIRO's item grid. Is there a function module / Badi to do this? I used MRM_HEADER_CHECK, but the parameters related with this badi only allows read but not change
-
Problems importing pix into my 2.5 quad 8 gigs ram, Canon Rebel xt
I have the newest firmware available...I have imported before...only had problems with raw...now it seems that I am haveing problems importing anything. Aperture was better when it first came out but it seems that every update degrades my ability to
-
Need to turn off "modify assets"
Hi all! I'm new here, and need some help!! I made an awesome movie in iDVD 7.0.2. When I open the file to burn it, it says I need to modify assets. When I hit cancel, it will not burn. When I allow it to modify, all the chapters buttons lead to the s
-
Measurement & Automation Problem I think?
Hello, have two seperate computers running the same software, one has vb6 installed. I have a labview program and vb6 program that does pretty close to the same thing. I set up a task in M&A with 2 temperatures. Voltages are the problem. They run fin
-
Configuration of third party billing and intercompany billing
Hi, can u give me details of Third party billing and intercompany billing with full details.