[Error] No value found in the Gateway. Default value in the repository is used.
Hi All,
I am new to Siebel and installed Siebel 8.1.1.11 on RHEL 5.5 (64 bit). Everything is fine Siebel server and gateway server are up and running but i am unable to open login page.
Login Error : The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.[15:36:09]
Siebel Server log file error :
GenericLog
GenericError
1
00006c5c52eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6352eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6452eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6552eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6652eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c7152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccitems.cpp (310) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccconfg.cpp (2149) err=2555932 sys=0) SBL-SCM-00028: Key not found
I can connect to Siebel Server manager using command as : srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
ODBC connectivity is also ok and i can connect as : ./odbcsql /source Sieb81_DSN /u SADMIN /p SADMIN
While installing Siebel i had left one step i .e.. creation of siebenv.sh using CreateSiebSrvrEnvScript because i got error when executed this script as :
Execution command : ./CreateSiebSrvrEnvScript /u01/siebel/ses/siebsrvr 192.168.0.163:2320 ENU Oracle
Error : cp: cannot copy a directory, '/u01/siebel/ses/siebsrvr/locale/' , into itself , '/u01/siebel/ses/siebersrvr/locale/C/locale'
Please suggest me what to do because if i want to configure again the same issue with CreateSiebSrvrEnvScript.
Message was edited by: Prabhakar2991
Hi Prameela,
You can see all application objects are online and running. One more thing I have also checked ODBC is also working fine. I mean , user SADMIN can connect using ODBC.
=====================================================================================================================================
[oracle@siebel163 siebsrvr]$ srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
Siebel Enterprise Applications Siebel Server Manager, Version 8.1.1.11 [23030] LANG_INDEPENDENT
Copyright (c) 1994-2012, Oracle. All rights reserved.
The Programs (which include both the software and documentation) contain
proprietary information; they are provided under a license agreement containing
restrictions on use and disclosure and are also protected by copyright, patent,
and other intellectual and industrial property laws. Reverse engineering,
disassembly, or decompilation of the Programs, except to the extent required to
obtain interoperability with other independently created software or as specified
by law, is prohibited.
Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of
Oracle Corporation and/or its affiliates. Other names may be trademarks
of their respective owners.
If you have received this software in error, please notify Oracle Corporation
immediately at 1.800.ORACLE1.
Type "help" for list of commands, "help <topic>" for detailed help
Connected to 1 server(s) out of a total of 1 server(s) in the enterprise
srvrmgr> list components
SV_NAME CC_ALIAS CC_NAME CT_ALIAS CG_AL IAS CC_RUNMODE CP_DISP_RUN_STATE CP_STARTMODE CP_NUM_RUN_TASKS CP_MAX_TASKS CP_ACTV_MTS_PROCS CP_MAX _MTS_PROCS CP_START_TIME CP_END_TIME CC_INCARN_NO CC_DESC_TEXT
siebelsrvr BusIntBatchMgr Business Integration Batch Manager BusSvcMgr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr BusIntMgr Business Integration Manager BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr SCCObjMgr_enu Call Center Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr CustomAppObjMgr_enu Custom Application Object Manager (ENU) CustomAppObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr DQMgr Data Quality Manager Dqmgr DataQ ual Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr EAIObjMgr_enu EAI Object Manager (ENU) EAIObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr InfraEAIOutbound EAI Outbound Server BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr EIM Enterprise Integration Mgr EIM EAI Batch Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr FSMSrvr File System Manager FSMSrvr Syste mAux Batch Online Auto 0 20 1 1 2014-01-29 02:48:25
siebelsrvr GenTrig Generate Triggers GenTrig Workf low Batch Online Auto 0 1 2014-01-29 02:48:30
siebelsrvr JMSReceiver JMS Receiver EAIJMSRcvr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr MqSeriesAMIRcvr MQSeries AMI Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MqSeriesSrvRcvr MQSeries Server Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MSMQRcvr MSMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SMQReceiver SMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SServiceObjMgr_enu Self Service Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr ServerMgr Server Manager ServerMgr Syste m Interactive Running Auto 2 20 2014-01-29 02:48:20
siebelsrvr SRBroker Server Request Broker ReqBroker Syste m Interactive Running Auto 25 100 1 1 2014-01-29 02:48:20
siebelsrvr SRProc Server Request Processor SRProc Syste mAux Interactive Running Auto 2 20 1 1 2014-01-29 02:48:25
siebelsrvr SvrTblCleanup Server Tables Cleanup BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr SvrTaskPersist Server Task Persistance BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr AdminNotify Siebel Administrator Notification Component AdminNotify Syste mAux Batch Online Auto 0 10 1 1 2014-01-29 02:48:25
siebelsrvr SCBroker Siebel Connection Broker SCBroker Syste m Background Running Auto 1 1 2014-01-29 02:48:20
siebelsrvr WorkActn Workflow Action Agent WorkActn Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WorkMon Workflow Monitor Agent WorkMon Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WfProcBatchMgr Workflow Process Batch Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr WfProcMgr Workflow Process Manager BusSvcMgr Workf low Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr WfRecvMgr Workflow Recovery Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eChannelCMEObjMgr_enu eChannel Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommunicationsObjMgr_enu eCommunications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommWirelessObjMgr_enu eCommunications for Wireless Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCustomerCMEObjMgr_enu eCustomer Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyObjMgr_enu eEnergy Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eMediaObjMgr_enu eMedia Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyOGCObjMgr_enu eOil Gas & Chemicals Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eSalesCMEObjMgr_enu eSales Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eServiceObjMgr_enu eService Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
37 rows returned.
srvrmgr>
=======================================================================================================================================
Please suggest me what to do.
Thanks
Prabhakar
Similar Messages
-
I recently ported my project to a new PC. Everything seems to run fine uncompiled, and I am able to build an executable without issue. However, my build specification shows up in the project explorer with question mark next to it. When I try to build again or edit the properties I get a popup with the information below:
Error 7 occurred at Get LV Class Default Value.vi
Possible reason(s):
LabVIEW: File not found. The file might be in a different location or deleted. Use the command prompt or the file explorer to verify that the path is correct.
=========================
NI-488: Nonexistent GPIB interface.
Complete call chain:
Get LV Class Default Value.vi
AB_UI_Initialize_Framework.vi
AB_UI_FRAMEWORK.vi
AB_Item_OnDoProperties.vi
AB_Item_OnDoProperties.vi.ProxyCaller
LabVIEW attempted to load the class at this path:
<Empty Path>
I've seen messages from people getting the same error when trying to run a compiled executable, but mine actually runs fine. I am just unable to open the build specification to rebuild or edit its properties.This application is for a Windows machine, and I am not using the Report Generation Toolkit. However, I shut down my computer last night and when I booted it up this morning my Build Specification now opens fine and I am able to edit it. My only thought as to why it occured in the first place is that I had added several files to user.lib and instr.lib and restarted LabVIEW, but it appears that it required my computer to be restarted as well.
-
I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
Error 7 occurred at Get LV Class Default Value.vi
With the following text:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Complete call chain:
Get LV Class Default Value.vi
NI_report.lvclass:New Report.vi
print report.vi
EMS V3.0 streamline.vi
LabVIEW attempted to load the class at this path:
H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
"EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
Any help would be appreciated. Thanks.
Garrett HerningOk, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
Error:
An error has occurred. Expand the Details section for more information.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Method Name: Linker:Write Info To File -
Error: A file found in a source-path must have the same package structure
I use Adobe Flex Compiler (mxmlc) Version 4.1.0 build 16032,I have a file,named CustomGraphContainerController.as,it's directory is c:\controllers,and the GCController.as file is under the same directory,CustomGraphContainerController.as file like follows
package controllers{
import ui.GraphControlContainer;
public class CustomGraphContainerController extends GCController {
public function CustomGraphContainerController(a_graphControlContainer:GraphControlContainer) {
super(a_graphControlContainer);
Then I want to use mxmlc command to compile it,like follows:
C:\>mxmlc c:\controllers\CustomGraphContainerController.as
But it raise compile errors,like follows:
Loading configuration file C:\sdk\frameworks\flex-config.xml
C:\controllers\GCController.as: Error: A file found in a source-path must have the same package structure '', as the definition's package, 'controllers'.
I don't know how to compile the as file with package controllers? Where is wrong? How to use mxmlc to compile it?
ThanksHI,
You should have one main application class to compile this as code to swf.. So that main application path should be in your proper package structure.. then you can compile you app and as files also...
Thanks
Ram.. -
Limit the no of segments per IDOC to less than the current default value
Hi friends,
please help me in the following issue.
The possibility to limit the number
of segments per IDOC to less than the current default value.
Purpose is to limit the traffic of IDOCs between systems.
How to solve this issue to avoid traffic
Thanks in advance.
Regards
SandeepHi Kiran,
Actually we are using standard ones at that time we are getting prolems. When using custom developed ALE's
we are putting segment size is less.To decrease segment size is there any filtering at the sender side? To change segment size may be nedd to take help form SAP.
But if have filtering at any level from sender side need to confirm before consult SAP.
Regards
Sandeep -
Presentation Variable in the SQL default section in the dashboard prompt
Hi Gurus,
I have two prompts and two go buttons. First Go button is used to populate pv_category1 presentation variable.
category_column --> pv_category1--> 1st Prompt
Product_Column --> pv_product2 --> 2nd Prompt
I want to set the default for the 2nd Prompt depending on the 1st Prompt ( Category) chosen by the user.
In the SQL default --> i have typed in the below Query.
*Select TableName.Product_Column from Subject_Area where category_column = '@{pv_category1}'*
The Problem is that i dont get any default value for 2nd Prompt after choosing the First prompt and hitting the GO Button.
If i hardcode the value in @{pv_category1} ...
for eg
Select TableName.Product_Column from Subject_Area where category_column = 'Incidents' i get the corresponding value as default.
But i want this 2nd prompt (product) to dyamically default depending on the 1st prompt (category) chosen by the user.
I am using OBIEE 10.1.3.4 and i have googled a lot on this topic...
can we not use Presentation variable in the SQL default section of the Dashboard Prompt?
Any help in this regard would be highly appreciated.
Thanks
AshishThanks for the Quick Reply.
But the functionality that i want to achieve is the default value in the 2nd column (out of many values for 2nd column) based on the 1st column chosen by the USER. for eg we have two columns in our database ie category and Product.. Data goes like this
category ProductName
Incidents --- A
Incidents --- B
Incidents --- C
Changes --- D
Changes --- E
Projects --- M
Projects --- N
Projects --- O
Projects --- P
If the User chooses Incidents in the first prompt then the default in the 2nd prompt should be B ( out of A,B,C Values available in the 2nd prompt)....
Checking the constraint checkbox doesnt solve the default problem...
Thanks
Ashish -
Extending OA tutorial - Task 3: Add or Change the Attribute Default Values
Hi,
I am trying to extend an existing EO (PurchaseOrderHeaderEO) and add some defaulting Logic. I'm trying to set a default value for the PaymentTermsCode.
When the code runs I am getting an error:
oracle.jbo.RowCreateException: JBO-25017: Error when creating a new entity line for mynamePurchaseOrderHeaderEO.
1. My new entity object extended PurchaseOrderHeaderEO
2. As outlined in the tutorial I also generated the create method.
3. I updated my java class (mynamePurchaseOrderHeaderEOImpl) with the following code.
public void create(AttributeList attributeList)
super.create(attributeList);
// Add or change the default values here. setPaymentTermsCode("NET_60");
4. I`ve added the EO substitution to the project.
Have I don anything wrong or missed anything?
ThanksHi Tapash,
Thanks for the valuable advise.
Before proceding on given suggestion i have one queries,
i.e the above error was coming when directly launching copied PoDescPG.xml from ExtendLab.jpr project but as suggested by you, it think i need to launch copied PoSummaryCreatePG.xml from ExtendLab.jpr?
Also I tried launching copied PoSummaryCreatePG.xml from ExtendLab.jpr and clicked on (B) "Create Purchase Order" but expected output (the defaulting of NET_60 for field "Payment Terms") is not found i.e. getting black value on the screen for field "Payment Terms".
But I have already applied the substitution in ExtendLab.jpr for using the custom EO object & custom EO is modified as below
public void create(AttributeList attributeList)
super.create(attributeList);
setPaymentTermsCode("NET_60");
Please help.
Thanks & Regards,
OA -
How to set the radiogroup default value?
I have created a radiogroup named P521_SIZE_NUM(Dealsize, DealNum) and want DealSize is checked when the page is showed. how can I set default value in the page Definition?
If you made a radio group off of the following static LOV:
STATIC2:One;1,Two;2,Three;3if you set the default value of your radio group to 2, the radio button with the label Two will be selected. You have to make sure to set the default value to the actual return value not the display value.
-Ghoulies -
J2iun error "No accounts found for plant IEQPD07' where PD07 is the plant.
22.05.2009
Hi friends when i execute j2uin i get the error 'No accounts found for plant IEQPD07' Message no. 8I080
PD07 is my plant. Putting this up after searching this forum.
Looking forward to helpful tips.
Regards,
UdayHi
Please check whether any GL accounts has been updated in the Excise configuration for the combination of Excise transaction type and chart of accounts.
Regards,
Lakshmanan Krishnan -
Error : Subscreen not found when an item is added in the shopping cart
Hi all,
I click on a catalog and select an item to create a shopping cart. When I click on submit requisition, I am getting the following error on the screen.
What does this mean? This is for a specific catalog whereas others are working fine.
Error:
The URL http://amln434:8000/sap/bc/gui/sap/its/bbpsc01/ was not called due to an error.
Note
The following error text was processed in the system ED1 : Subscreen not found
The error occurred on the application server amln434_ED1_00 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLBBP_SC_UI_ITSHi,
What release of SRM are you using? If SRM 7.0 then the URL called is incorrect, ITS is no longer used for SRM nor are service files, Abap WebDynpro is used to render the SRM screens.
Give us some more information on the error and check for corresponding short dump in ST22, also check that if you are using ITS that the service exists in SICF and is active.
Regards,
Jason -
How to show value from another Object as Default value from Prompt
Hi,
I am creating a web Report with the following filter :
Enrollment Date FROM : 01/01/2011 12:00:00 AM (Default 1st day of previous month)
Enrollment Date TO : 01/02/2010 12:00:00 AM (Default: 1st day of current month)
There are values for Enrollment date from 01/01/ 2004 till today but user want to have a default value as in brackets above.
When I select prompt option for 'Enrollment Date' all the dates (from 01/01/ 2004 till today) are shown as usual. Database is Oracle and I am able to create Objects in Universe that show the default required dates, but not sure how I use them in the prompt. Is there any way or workaround?
Nanda Kishore.If i Understand Correctly you requirement you want to set a default value for date in prompt but user should have the ability to change these values if the want ?
In order to implement this you can create a Object in Universe with definition
Date Choice - @prompt('Default or Custom Date','A',{'Default','Custom'},mono,constrained)
Then use this along with the date prompt in query filter as follows.
Set Data choice =Default
Date1= Default Date
and
Date2= Default Date
OR
Set Date Choice=Custom
Date1 = Prompt
and
Date2= Prompt -
Not able to see Default values in WebI (Can See Default Values in Bex )
Hi All,
Could you please help me with the issue with default values variable. We have one variable type Issues From and Reciepts from. When I run the query in Bex it comes up with default values but when we run the report in WEBI, it doesn't come up with default values.
Is there any workaround to populate the default values in WebI or Universe?
Can someone please help me with this?
Thanks
NisnikiNo, I don't see default values.
<OPERATOR VALUE="AND"><FILTER KEY="[!V000012]"><CONDITION OPERATORCONDITION="InList"><CONSTANT TECH_NAME="@Prompt('Issues','A','Movement Type\LovIssuesBase',multi,primary_key)"/></CONDITION></FILTER><OPERATOR VALUE="AND"><FILTER KEY="[!V000011]"><CONDITION OPERATORCONDITION="InList"><CONSTANT TECH_NAME="@Prompt('Receipts','A','Movement Type\LovReceiptsBase',multi,primary_key)"/></CONDITION></FILTER><OPERATOR VALUE="AND"><FILTER KEY="[!V000010]"><CONDITION OPERATORCONDITION="InList"><CONSTANT TECH_NAME="@Prompt('Issues_Adj','A','Movement Type\LovIssues_AdjBase',multi,primary_key)"/></CONDITION></FILTER><FILTER KEY="[!V000009]"><CONDITION OPERATORCONDITION="InList"><CONSTANT TECH_NAME="@Prompt('Receipts_Adj','A','Movement Type\LovReceipts_AdjBase',multi,primary_key)"/></CONDITION></FILTER></OPERATOR></OPERATOR></OPERATOR> -
How to remove the orange default color of the first cell in an ALV report
Hello all,
I have coded an ALV grid report (in ABAP object) and when I execute it, I saw that the first cell containing data, in the top left corner of the ALV grid is always colored in orange by default. This bothers me because I have colored this cell in green (if I select an other line in my grid, I can clearly see that my top left cell is colored in green).
Does anyone knows how to "desactivate" this orange default color ?
Thanks for your answer.
Best regards
Cyril S.Thanks Uwe and Rainer,
Unfortunately, I tried what you mentioned both and nothing works.
As you said, it seems mandatory that a cell must be selected by default in an ALV grid.
That's a pity because this "ugly orange" hides my beautiful green color.
I will answer my customer that it is not possible. That's all.
Thank you for your help. I did appreciate.
Best regards
Cyril S. -
How to find the internal(default name) of the fields once renamed?
Hi,
Is it possible to find what default fields are used(renamed) and new custom fields created from field configuration?
thanks,
mm, you can find it out from field management screen for a particular object (e.g. Admin > Application Customization > Activity > Activity Field Setup). Click on the Rename button, and in the resulting screen the 2nd column “Default Name” will contain “<Custom Field>” for the new field were as for the OOB field it will contain the OOB field name.
-
After Effects CS3 error: file not found -43 and TIFFIO failed to open the file
Hello
I am experiencing a problem with AE CS3.
I have several TIFF sequences (with alphas) that are giving me a headache. When I import them into AE, I get an "AEGP Plugin TIFFIO: Failed to open the file" error.
I researched the forums and found that this could be related to odd formatting of the source media (my TIFF sequence). I created these TIFFs in Maya 2008 and I have imported other sequences made with Maya into AE with no issues.
Just to be sure, I created a Photoshop droplet that re-saved my TIFFs as Photoshop TIFFs with the same names.
I re-imported the new Photoshop TIFF sequences (still with alphas) into AE CS3, and I get the same error.
Any ideas? I don't know what to do next.
Thanks,
-------------SYour USB drive may have had a weird character in it's name.
AE can't read CMYK images, that is usually the problem.
Imported images do not have to conform to any specific sizes (unless you want to go over 30,000 x 30,000 pixels.)
- Jonas Hummelstrand
http://generalspecialist.com/ -
Workspace Preferences -- Setting the right default values
Good afternoon --
We are in the midst of rolling out Hyperion Planning 9.3.x along with Financial Reporting, SmartView, etc. to a large population (~1000 users). We would like to be able to set and/or reset certain user preferences.
The most salient example is Financial Reporting > General > User Point of View > Preview --- default setting is "Off" but this causes user confusion and support calls the first time users log in. Is there a way for us to set the default to "On" for all users instead?
[Other potential examples -- default start-up content, PDF vs. HTML Preview, position of the POV]
Thanks,
Jasonuser10174749 wrote:
Good afternoon --
We are in the midst of rolling out Hyperion Planning 9.3.x along with Financial Reporting, SmartView, etc. to a large population (~1000 users). We would like to be able to set and/or reset certain user preferences.
The most salient example is Financial Reporting > General > User Point of View > Preview --- default setting is "Off" but this causes user confusion and support calls the first time users log in. Is there a way for us to set the default to "On" for all users instead?
[Other potential examples -- default start-up content, PDF vs. HTML Preview, position of the POV]
Thanks,
JasonOur Oracle consultants helped us to setup the preference "Preview" be "On" by scripts.
Maybe you are looking for
-
I have been uploading my CD's to itunes but only copying them to my ipod in small quantities. If I copy, say, six albums they show up on the ipod but they are nowhere to be found once I copy others which seem to take their place. Can anyone tell me i
-
Problem with flextime in Logic 9
I've recently been learning the new flextime tool in logic 9 and I was trying to audio quantize my audio kick and bass tracks ( like the demo video shows ). I made a groove template of the kick which, of course, shows in the inspector but when I went
-
Byte array to base64encoder problem, cannot encode a 7.7 MB file
hey guys, so ive been trying to use the base64encoder to encode a bytearray which is then sent thru a webservice to the server to be decoded. and as the subject of this post suggests, i have been having problems encoding a big file, forexample i trie
-
Question about Val(Sgnl) property
Hello, I am reading data from a telnet connection as 16-bit binary values. I strip individual bits of that 16-bit word to light up indicators. For each indicator that I light up, I want to have an associated 'history' indicator, that would show if
-
Dunning term field in Business partner master data Screen
Hi all, I have created a dunning term and i want to assign this dunning term for all customers in my DB. could anybody tell me how do i assign this. I dont want to assign it by going into each and every BP master data. ive 3000