Error notes

Ok i have attatched note in ** AND CAPITALS for errors
as i dont know how to cut and paste from DOS
i will have to do this in a few goes!
I do appreciate the help on this as its all new to me
Paul
public class week9
public static void main (String args[]);**MISSING METHOD BODY, OR DECLARE ABSTRACT
//variables
int counter = 0;
char [] vowel = new char[30];
char [] newVowel = new char [5];
int aCount = 0;
int eCount = 0;
int iCount = 0;
int oCount = 0;
int uCount = 0;
//code block
while (counter < 31){
System.out.print("Welcome to the vowel program.");
System.out.print("Please enter a vowel (a,e,i,o,u) (30 max), # to quit:>");
if (char index[] == 'a')||(char index[] == 'e')||(char index[] == 'i')||(char index[] == 'o')||(char index[] == 'u');** UNEXPECTED TYPE <REQUIRED VALUE FOUND CLASS
     for(char index=0 ; index < vowel ; index++)**OPERATOR < CANNOT BE APPLIED TO CHAR,CHAR[]
          vowel[index] = Keybd.in.readChar ();
          counter = (counter +1);
     if (char index[] == '#')||(counter == 30)** UNEXPECTED TYPE REQUIRED VALUE FOUND CLASS
          if (char index[] == 'a');
     {               aCount = (char index[])
               aCount = aCount + 1
               newVowel[index] = aCount
               System.out.print("There are " + aCount" a's in the array");
          if (char index[] == 'e'))** UNEXPECTED TYPE REQUIRED VALUE FOUND CLASS
     {             eCount = (char index[])
               eCount = eCount + 1
               newVowel[index] = eCount
               System.out.print("There are " + eCount" e's in the array");
          if (char index[] == 'i')
     {          iCount = (char index[])
               iCount = iCount + 1
               newVowel[index] = iCount
               System.out.print("There are " + iCount" c's in the array");     
          if (char index[] == 'o')
     {          oCount = (char index[])
               oCount = oCount + 1
               newVowel[index] = oCount
               System.out.print("There are " + oCount" o's in the array");
          if(char index[] == 'u')
     {          uCount = (char index[])
               uCount = uCount + 1
               newVowel[index] = uCount
               System.out.print("There are " + uCount" u's in the array");
     System.out.println("The new array is " +newVowel);
else
     System.out.print("Bad Selection. You must choose a vowel (a,e,i,o,u). Try again.");
}

Argh...use code tags!
I'm only doing this because I need some good Karma
public class week9
   public static void main(String args[]);**MISSING METHOD BODY, OR DECLARE ABSTRACT
      //variables
      int counter = 0;
      char [] vowel = new char[30];
      char [] newVowel = new char [5];
      int aCount = 0;
      int eCount = 0;
      int iCount = 0;
      int oCount = 0;
      int uCount = 0;
      //code block
      while (counter < 31)
         System.out.print("Welcome to the vowel program.");
         System.out.print("Please enter a vowel (a,e,i,o,u) (30 max), # to quit:>");
         if (char index[] == 'a')||(char index[] == 'e')||(char index[] == 'i')||(char index[] == 'o')||(char index[] == 'u');** UNEXPECTED TYPE <REQUIRED VALUE FOUND CLASS
      for(char index=0 ; index < vowel ; index++)**OPERATOR < CANNOT BE APPLIED TO CHAR,CHAR[]
      vowel[index] = Keybd.in.readChar();
      counter = (counter +1);
      if (char index[] == '#')||(counter == 30)** UNEXPECTED TYPE REQUIRED VALUE FOUND CLASS
      if (char index[] == 'a');
      { aCount = (char index[])
        aCount = aCount + 1
        newVowel[index] = aCount
        System.out.print("There are " + aCount" a's in the array");
      if (char index[] == 'e'))** UNEXPECTED TYPE REQUIRED VALUE FOUND CLASS
      { eCount = (char index[])
        eCount = eCount + 1
        newVowel[index] = eCount
        System.out.print("There are " + eCount" e's in the array");
      if (char index[] == 'i')
      { iCount = (char index[])
        iCount = iCount + 1
        newVowel[index] = iCount
        System.out.print("There are " + iCount" c's in the array");
      if (char index[] == 'o')
      { oCount = (char index[])
        oCount = oCount + 1
        newVowel[index] = oCount
        System.out.print("There are " + oCount" o's in the array");
      if(char index[] == 'u')
      { uCount = (char index[])
        uCount = uCount + 1
        newVowel[index] = uCount
        System.out.print("There are " + uCount" u's in the array");
      System.out.println("The new array is " +newVowel);
      else
         System.out.print("Bad Selection. You must choose a vowel (a,e,i,o,u). Try again.");
}

Similar Messages

  • Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

    Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send. 
    Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
    Scenario: I have below configuration of exchange 2010 server Setup:
    1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
    Server Name: WDC2010
    Domain: Blazex.Com
    2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Hub/Client Access Exchange role servers.
    Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Hub and Client Access Server.
    3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Mailbox Exchange role servers.
    Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Mailbox Server.
    4. 2nd  Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Mailbox Exchange role servers.
    Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Mailbox Server.
    5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
    Workstation Name: WIN7.blazex.com
    Role: Workstation
    Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send. 
    Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
    I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010).  I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
    Can someone please help me on this?
    Thanks and Regards
    Shambhu

    Hi Subhash,
    I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
    Below are the questions's answers which was asked by you:
    1.     Please check whether you can send email via Outlook.
    I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
    2.     Please run EXBPA to have a health scan.
    I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
    a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
    b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
    c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
    d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
    e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
    The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
    3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
    I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
    4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
    I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
    a) Rebooted the Workstation
    b) Login successfully with same user.
    c) Delete the Old MS Outlook Profile
    d) Create New profile for same user without any problem.
    e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
    f) Open the OWA successfully for Same user.
    g) Tried to send mail but again mail went to Drafts Folder.
    5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
    mailbox via OWA to test the issue.
    I tried you suggested option, but sorry it also couldn't help.
    6.  You also check your disk space.
         All Servers have Enough Disk Space. Check the EXBPA Report.
    7. You may run EXTRA to get log information for further troubleshooting.
      Need more time for this.
    8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
       I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
       a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
       b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
       c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
       d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
       e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
       f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
    There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
    I hope my answer will give you some clue and I expect more help from your side.
    With Best Regards
    Shambhu Sharma

  • Crystal Report: irregular error not handled by the application component

    Hi all,
    The error message u201Cirregular error not handled by the application componentu201D comes up when I run any of the Crystal Report in the SAP Business One.
    But this error happens only in the client Machines, from the Server I can run the report normally.
    Thanks and Regards,
    Alberto Franç

    Hi,
    It seems installation and registration problem, have you tried to other client computers? Try to reinstall  the Crystal Report in client.
    Regards,
    Clint

  • Since installing the latest update, Firefox will not load; it gives me the following error -- XML Parsing Error: not well formed.

    since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
    XML Parsing Error: not well formed
    locations chrome://browser/content/browser.xml
    Line Number 1191, column 20:
    utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
    please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
    I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
    Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
    1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
    2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
    3. there may have been other errors, but I did not find them.
    How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
    Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
    Thanks,
    NOEL

    Some how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
    firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none

  • "unable to get printer status" and "server-error-not-accepting-jobs"

    I've got an Intel Mac Pro with Tiger. When I accepted the latest update from Apple, I lost all my defined printers! I've re-added a local USB printer and a networked Laserjet - fine. But I also added a Phaser 850 color printer (networked) which used to work fine. It connects ok, and opens the printer queue window, but when it tries to print, it says "Unable to get printer status (server-error-not-accepting-jobs". The queue stays active (not stopped) but the jobs don't move. I've tried deleting the printer and re-making it - same deal. What's going on?
    Mike

    Hi Mike,
    One think I really dislike about OSX is the Rocket Science needed to just Print!
    Might try these two...
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    Might try Printer Setup Repair 5.1...
    http://www.fixamac.net/software/index.html

  • "Client error not found" = DOOOOOOOOMMMMMM!!!!!!!

    Ok been getting this a lot recently and I think it is to do with my printer setup script. There must be a way to fix it, but for the life of me I can not find the solution.
    It usually starts with all printers on the system being paused. You can unpause them, but as soon as you try print they automatically pause again.
    You can reset the print system, but when you try readd a printer you get the message of doom "client-error-not-found".
    From then on I can not add any printer to the system and the only fix is a wipe and reinstall.
    I mentioned above that I use a printer script to install the 10+ printers in the office onto the 80+ machines. All the machines are running 10.5 and upto date.
    I have put the script to have a look at, but even if it is causing the problem there should be a way to fix the issue.
    #Reset print system.
    do shell script "lpstat -p | cut -d' ' -f2 | xargs -I{} lpadmin -x {}" with administrator privileges
    #log onto the server and mounts the IT_support folder. If the IT_support folder is already mounted it will skip the mount and move on.
    if {"IT_support"} is not in paragraphs of (do shell script "/bin/ls /Volumes") then
    mount volume "afp://192.168.1.251/IT_support"
    end if
    do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/drivers/* /Library/printers/PPDs/Contents/Resources/" with administrator privileges
    #Add the printers to the system.
    #Colour Printers.
    #Colour_Printroom Appletalk.
    do shell script "lpadmin -p Colour_PrintRoom -L FirstFloorPrintRoom -E -v pap://*/Colour_PrintRoom/LaserWriter -P /Library/printers/PPDs/Contents/Resources/xrx7655.ppd -o printer-is-shared=false" with administrator privileges
    #Colour_Kitchen Appletalk.
    do shell script "lpadmin -p Colour_Kitchen -L First\\ Floor\\ Kitchen -E -v pap://*/DC3535_DC3535Print/LaserWriter -P /Library/printers/PPDs/Contents/Resources/Xerox\\ DocuColor3535\\ PS -o printer-is-shared=false" with administrator privileges
    #BizHub Appletalk.
    do shell script "lpadmin -p Colour_BizHub -L Colour_BizHub -E -vpap://*/X3eBizhub45035C-KMPrint/LaserWriter -P /Library/printers/PPDs/Contents/Resources/en.lproj/Fiery\\ X3eTY\\ 35C-KM\\ PS\\ v2.01\\ eu -o printer-is-shared=false" with administrator privileges
    #Admin Printers.
    #Reception Bonjour.
    do shell script "lpadmin -p Reception -L Ground\\ Floor\\ Reception -E -v mdns://Reception%20%2892%3A1b%3A58%29.pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
    #A3_Northside Bonjour.
    do shell script "lpadmin -p A3_Northside -L First\\ Floor\\ North\\ Side -E -v mdns://A3Northside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
    #A3_Southside Bonjour.
    do shell script "lpadmin -p A3_Southside -L First\\ Floor\\ South\\ Side -E -v mdns://A3Southside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
    #Studio3_Admin Bonjour.
    do shell script "lpadmin -p Studio3_Admin -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
    #Studio1_Admin Bonjour.
    do shell script "lpadmin -p Studio1_Admin -L First\\ Floor\\ Studio\\ 1 -E -v mdns://Studio1Admin%20%2892%3A41%3Af6%29._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
    #Studio3_A3 Bonjour.
    do shell script "lpadmin -p Studio3_A3 -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3A3._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ LaserJet\\ 5100\\ Series.gz -o printer-is-shared=false" with administrator privileges
    #Plotters.
    #PlotterDeathstarHP4500ps Bonjour.
    do shell script "lpadmin -p PlotterDeathStarHP4500ps -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterDeathstar_HP4500ps._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ Designjet\\ 4500\\ PS3.gz -o printer-is-shared=false" with administrator privileges
    #PlotterPosterEpson7600 Bonjour.
    do shell script "lpadmin -p PlotterPosterEpson7600 -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterPosterEpson7600.printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/en.lproj/stp-escp2-7600.5.2.ppd.gz -o printer-is-shared=false" with administrator privileges
    #Copy a fresh copy of the printer driver settings back onto the system after the printers have been installed. driver settings are stored in /etc/cups/PPD admin rights required to copy files into this folder
    do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/ppd/* /etc/cups/PPD" with administrator privileges
    #Copy printer presets on to system.
    do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences" with administrator privileges
    #The following printer is added into the system speratly due to a driver selection issue when adding more than one Xerox Phaser 4510DT. The system seems to apply the correct driver to the first one that is added to the system. The second Xerox Phaser 4510DT does not get the correct driver applied to it.
    #Studio2_Admin Bonjour.
    do shell script "lpadmin -p Studio2_Admin -L First\\ Floor\\ Studio\\ 2 -E -v mdns://Studio2Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
    #Copy printer presets on to system.
    do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences"
    do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04_Printers/PrinterAutoInstall/ppd/Studio2Admin.ppd /etc/cups/PPD/" with administrator privileges
    #Reset file permissions
    do shell script "chmod 664 /Library/Printers/PPDs/Contents/Resources/*" with administrator privileges

    Well, I succeeded in solving the problem by myself ...
    The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

  • Can't delete printer - client-error-not-found

    After messing around with the installation of a cups based network printer (via a local Suse server) I came across some strange problems with my printer setup utility. Currently, I can neither delete nor add a printer from the list for the current user. When trying to delete a previously installed network printer I get an error message that the printer could not be removed (client-error-not-found). When trying to add a new printer I won't get an error message, but the printer is not being added to the list anyhow.
    I already tried to reset the printing system both with the printer setup utility and with the Printer Setup Repair Tool from Fixamac, both without success.
    I have to note that for user root everything works fine!
    Any suggestions?
    Wolfgang
    MacBook Pro   Mac OS X (10.4.8)  

    Well, I succeeded in solving the problem by myself ...
    The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

  • Crystal Reports 2008 Formula in Cross-Tab Error Not Supported

    I have a crosstab that was created in Crystal XI and when I opened the report in Crystal 2008 I receive an Error "Not Supported" when I removed the fromula that was in the Crosstab the report displayed. The following is the formula that is within the crosstab:
    If {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME} = '(No Cohort)'  THEN
        If DistinctCount({VWR_PPS_VISIT_SCHEDULE.COHORT_NAME},{VWR_PPS_VISIT_SCHEDULE.PROPOSAL_VERSION_ID}) >1 then
             {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
        else
            ""&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
    else
        {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
    As I mentioned the formula works perfectly in Crystal XI but not Crystal 2008 which no sese at all.  We are preparing to migrate from Crystal XI to Crystal 2008 and if this is an issue we may need to but upgrading off.
    Any help with this would be gratly appreciated.
    Thanks
    Edited by: jackie2009 on Oct 9, 2009 3:41 PM

    Try adding brackets around the If statements.e.g.
    If {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME} = '(No Cohort)' THEN
    If DistinctCount({VWR_PPS_VISIT_SCHEDULE.COHORT_NAME},{VWR_PPS_VISIT_SCHEDULE.PROPOSAL_VERSION_ID}) >1
    then {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
    else ""&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
    else {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}

  • I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

    I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
    The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
    * You have used the proper case; requests ARE case-sensitive!
    * You have entered the URL correctly. (i.e. proper directory/filename)
    * You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
    * You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
    * The user/file still exists on this server.
    I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
    == URL of affected sites ==
    http://facebook.com; buscagoogle.com

    I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

  • What does "After Effects error: Not enough memory to initialize PSL. ( 83 :: 8 )" mean?

    So, about a week ago I did a fresh install of 64-bit Windows 7 Ultimate on a new PC, and subscribed to the Adobe Creative Cloud, installing After Effects CS6 and Photoshop CS6 from the Adobe Application Manager, then doing all updates (and I just checked right now at 10:35PM on July 26th, I have the latest versions of everything).
    After Effects was working completely normal, then just now, I tried to import a Photoshop .psd and I got the error message:
    After Effects error: Not enough memory to initialize PSL.
    ( 83 :: 8 )
    Then After Effects crashed. So now it opens up normally, but when I try to import a .psd or open an After Effects project saved from an earlier version of After Effects (CS3 to CS5) I get the same error and a crash, every single time.
    Searching the forums, I see people talking about this error when importing .psds into CS5, and they say that getting the latest updates solved the issue for them (which obviously can't help me). I'm running all legit software on a brand new computer with 32 GB of RAM which has passed all my physical stress tests so I know it's not hardware related.
    The one thing I saw people suggest is to hold down Ctrl-Alt-Shift when starting the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the older AE files. When I close After Effects and reopen it without holding down the Ctrl-Alt-Shift keys, it goes right back to crashing.
    Obviously the smart-*** answer is "then hold down Ctrl-Alt-Shift, dummy", and I'll do that for now, but is there any clue what the problem is?
    I feel like kind of a chump because I decided to stop using my student versions of Adobe software (I haven't been a student for about four years) and pay the full price for the cloud membership and the latest creative suite, and it's full of bugs.

    Now, I get the same ( 83 :: 8 ) error listed above, followed by a new dialog window that reads:
    After Effects error: Crash in progress. Last logged message was: <4488> <DynamicLink> <5> C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
    Then, when I click OK, I get:
    After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2).
    ( 0 :: 42 )
    Clicking OK to that gives me a chance to save the latest project, then the standard Windows 7 crash dialog window opens, the one that gives me the choice of "Check online for a solution and close the program" or just "Close the program" and lets me View problem details, which are:
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          AfterFX.exe
      Application Version:          11.0.0.378
      Application Timestamp:          4f6d63ab
      Fault Module Name:          StackHash_a85b
      Fault Module Version:          6.1.7601.17725
      Fault Module Timestamp:          4ec4aa8e
      Exception Code:          c0000374
      Exception Offset:          00000000000c40f2
      OS Version:          6.1.7601.2.1.0.256.1
      Locale ID:          1033
      Additional Information 1:          a85b
      Additional Information 2:          a85ba096cc6b6acabe6eaf35bf34dc60
      Additional Information 3:          f862
      Additional Information 4:          f86227a9dfa15a47cdb6c94bb0d08360

  • SQL error not displayed. Instead wwv_flow.accept was not found

    Hi,
    My Question:
    Why does the SQL error in this case not get propagated up the chain?
    BACKGOUND:
    Just spent a few hours trying to figure out why when trying to insert into a table using a wizard created page I was getting the error: The requested URL /pls/htmldb/wwv_flow.accept was not found on this server. It turns out that the error message is a red herring, and the problem was caused by a SQL error that I thought should have been caught and displayed.
    When running the page under debug, the error is displayed, but run as Joe Blow user, the www_flow.accept error is received.
    DETAILS
    Process details where the insert takes place:</h3>
    Process point:
    After Submit - after computations and validations
    Process Messaging
    Process Error Message
    Unable to insert a row to TRAINING_SESSIONS
    HTML DB ERROR (NOT IN DEBUG MODE)
    This is the error the end user sees in the browser:
    The requested URL /pls/htmldb/wwv_flow.accept was not found on this server
    APACHE ERROR_LOG
    [Sun Jun 06 17:50:28 2004] [error] [client 127.0.0.1] [ecid: 1086508225:10.6.6.6:1724:1732:320,0] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404 ORA-03113: end-of-file on communication channel
    [Sun Jun 06 17:50:28 2004] [alert] [client 127.0.0.1] [ecid: 1086508225:10.6.6.6:1724:1732:320,0] mod_plsql: Unable to reset state for mode 0: Err 3114 url=>/pls/htmldb/wwv_flow.accept
    HTMLDB DEBUG MODE OUTPUT
    This is what you see when running the page as developer with debug on:
    0.01: Processing point: AFTER_SUBMIT
    0.01: ...PLSQL (AFTER_SUBMIT)
    INSERT INTO "TRAINING_SESSIONS" ("TRNG_ID",
    "COURSE_ID",
    "START_DATE",
    "LOCATION",
    "COST")
    VALUES ( TRNG_SEQ.NEXTVAL,
    :P27_COURSE_ID,
    :P27_START_DATE,
    :P27_LOCATION
    :P27_COST)
    0.01: Show ERROR page...
    0.04: Processing point: AFTER_ERROR_HEADER Home
         Error      Unable to insert a row to TRAINING_SESSIONS
    OK      
    0.06: Processing point: BEFORE_ERROR_FOOTER
    ORA-06550: line 6, column 9: PL/SQL: ORA-00947: not enough values ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
    ACTUAL PROBLEM:
    The sequence TRNG_SEQ does not exist!

    Has anyone found what causes this problem? I am running HTMLDB 1.6
    I have a HTMLDB application running against four databases. I develop in one and export and import the application to all databases. It appears that on the databases that are NOT development, this www_flow.accept was not found comes up instead of the error page.
    Please help! We are getting so close to wanting to release this application.

  • Firefox crashes continually. Now I'm getting this error and cannot open firefox at all: XML Parsing Error: not well-formed Location: chrome://browser/content/browser.xul Line Number 1068, Column 87:

    SInce the latest update Firefox has crashed continually for about two weeks now. Continually means at least 10 times a day. Now it does not open at all and I get this message when launching Firefox:
    XML Parsing Error: not well-formed Location: chrome://browser/content/browser.xul Line Number 1068, Column 87:

    SInce the latest update Firefox has crashed continually for about two weeks now. Continually means at least 10 times a day. Now it does not open at all and I get this message when launching Firefox:
    XML Parsing Error: not well-formed Location: chrome://browser/content/browser.xul Line Number 1068, Column 87:

  • APEX on Oracle XE PDF printing produces: Format error: not a PDF or corrupted.

    Dear fellow Apexers and Oracle Gurus,
    I have the following configuration:
    Oracle XE 11gR2
    APEX 4.2.3.00.08
    Listener 2.0.5
    On this setup I can create workspaces and applications as I please.
    Now I want to print a PDF report.
    I have set up PDF printing to "Oracle Listener" in the "manage Instance" settings in the instance administration.
    I have created a classical report on the EMPLOYEES table (Select * from EMPLOYEES)
    and enabled PDF printing in the "Printing" area of the "Print Attributes" of the page.
    When I run the page I do get the "print" link on the bottom of the page.
    Clicking the link does produce a .PDF but showing this file triggers an error in my PDF reader: Format error: not a PDF or corrupted.
    Opening the .PDF file in a text editor reveals the corrupt content.
    %PDF-1.4
    %ª«¬
    Unknown function: gatherContextInfo
    The same setup works fine and produces the expected PDF file with the report on the following configuration:
    Oracle Vbox with Developer days image;
    DB 11gR2
    Upgraded to apex 4.2.3.00.08
    Listener 2.0.5
    Since the PDF shows "unknown function" I suspected the XE configuration to lack some of the necessary rights, maybe I forgot to configure the ACLs correctly.
    So I compared the ACL info on both configurations. Alas,.. on both machines they return the same result..
    SQL> SELECT * FROM DBA_NETWORK_ACLS
    HOST         LOWER_PORT    UPPER_PORT    ACL
    localhost    null          null           /sys/acls/local-access-users.xml
    *            null          null           /sys/acls/power_users.xml    
    SQL> select * from dba_network_acl_privileges
    ACL                                  PRINCIPAL      PRIVILEGE   IS_GRANT    INVERT
    /sys/acls/local-access-users.xml     APEX_040200    connect     true        false
    /sys/acls/power_users.xml            APEX_040200    connect     true        false 
    Anyone any idea why this works fine on the Vbox and not on the local XE configuration?
    Any hint or answer as to where the problem might be is appreciated
    TIA
    Wouter

    I'm having the same issue. I'm using Oracle XE 11gR2 as well. I've tried with APEX 4.2.2 and APEX 4.2.4. I have set up the Oracle Listener in instance settings and set the report to print and I have the same result as you. Have you had any progress yet?
    Thanks
    Jason

  • Error: Not Found Error: Out of Memory

    Hello,
    I'm trying to use a few photoshop files in Final Cut Pro 7.0.3 and I can't seem to shake these error messages.
    I've never had trouble using Photoshop files in the past but these ones are being uncooporative.
    I've imported the .psd file and edited it into the sequence.  The sequence setting match the clip settings.  Then I've added the "Page Peel" Transition to the edit point.  Immediately the canvas goes red and says something like "close and open window to restore preview."  After this I try to play the sequence and it says "Error: Not Found."  After closing and reopening the sequence my attempts to play back my work result in the error "Error: Not Found" followed immediately by "Out of Memory."
    I opened activity monitor to try and see if I was running out of ram space and I've got loads left.  I also have plenty of room on the hard disk I'm working from.
    Any thoughts?
    Thanks,
    Ryan

    Check your PSD documents, make sure they are RGB 8 Bits/Channel.
    MtD

  • Bump VMware Server 1.0.7 Latest error --Not enough memory...

    VMware Server Help Post
    Platform:
    Intel core 2 Duo E2168.
    2G ram, but 1/2 just went missing. If this is causing my problems, the mind wobbles, yet it's easy to fix, yay!
    Lots of harddrives! Lots of harddrive space.
    gigabit eth.
    Nvidia 7600GS 512MB
    Highpoint raid card (soft) 132Gigs for VMs
    Archlinux w/ 2.6.26.3-1 kernel
    kernel-headers 2.6.25.8-1
    History:
    Four weeks ago--
    Patched and installed VMware Server 1.0.5 on Archlinux with kernel 2.6.25... everything worked well. Bliss!
    About 2 weeks ago--
    Upgraded kernel to 2.6.26... time suck began.
    Current status:
    After banging on VMware and vmmon patch and source code for a while,
    now have on kernel 2.6.26-arch--
    VMware Server 1.0.7 with patch ...117d, modified as follows:
        In .../vmmon-only/include/iocontrols.h
    line 48 #define VMMON_VERSION           (168 << 16 | 0)   changed to:
    line 48 #define VMMON_VERSION           (138 << 16 | 0)
    Patch reasoning [limited newb alert]:
    Without 117d, vmmon fails to compile with error re: .nopage
    With 117d, vmmon compiles and installs successfully but VMs
      won't start with error re: expect version 138 got 168
    With patch modified, now past the version error, but getting the error:
    Not enough physical memory is available to power on this virtual machine.
    To fix this problem, power off other virtual machines                      [No others on]
       or adjust the additional memory settings to allow more virtual machine
       memory to be swapped                                   [There's plenty of memory]
    If you were able to power on this virtual machine on this host computer
       in the past, try rebooting the host computer. Rebooting may allow you
       to use slightly more host memory to run virtual machines.                [Rebooting had no effect]
    In log:
    Failed to connect to vm: /mnt/VMs/Test Booger/Test Booger.vmx
    vmdbPipe_Streams Couldn't read: OVL_STATUS_EOF
    Error during launch: 11, The process exited with an error:
    End of error message
    Operation failed to change the VM to the expected power state.
    Not enough physical memory is available to power on this virtual machine.
    To fix this problem, power off other virtual machines                      [No others on]
       or adjust the additional memory settings to allow more virtual machine
       memory to be swapped                                   [There's plenty of memory]
    If you were able to power on this virtual machine on this host computer
       in the past, try rebooting the host computer. Rebooting may allow you
       to use slightly more host memory to run virtual machines.                [Rebooting had no effect]
    There's plenty of memory and disk free space--
    top -b >> top_out
    top - 06:59:46 up 40 min,  0 users,  load average: 0.02, 0.05, 0.03
    Tasks: 113 total,   1 running, 112 sleeping,   0 stopped,   0 zombie
    Cpu(s):  1.1%us,  0.5%sy,  0.0%ni, 97.2%id,  1.2%wa,  0.0%hi,  0.0%si,  0.0%st
    Mem:   1034920k total,   441944k used,   592976k free,    17604k buffers
    Swap:  2000084k total,        0k used,  2000084k free,   227224k cached
    df -ha
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/sda3              72G   44G   25G  65% /
    /dev/sdc1              20G   12G  7.5G  61% /mnt/home2
    /dev/mapper/hpt45x_dcafabbcai1
                          153G   21G  132G  14% /mnt/VMs
    I reduced host memory settings to 408MB and guest to 256MB as a test.            [No effect]
    After the tests I've done, I don't believe this error really has anything to do with low memory.
    I don't know whether this is a bug, a patch problem, or, or, or, or .....
    And so I post.
    What next?
    thanx in advance.
    Last edited by maxbally (2008-09-15 23:33:21)

    Hi Mike,
    Mike23 wrote:
    Hi, I  develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer​.zip)
     from crio and then displays them on  7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of  measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please.  Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
    It's likely that instead of trying to plot 5 charts with 150000 data-points, you're trying to plot 150000charts with 5 data-points!  Try right-clicking on the chart - do you see "Transpose Array" property? If it's checked, UNcheck it (if UNchecked, check it!)
    Cheers!
    "Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

  • "500 Internal Server Error" not opening into explorer

    I have problem in ORACLE BI while opening Presentation Services and BI publisher.
    I installed MS Windows 2003 Server SP2, Internet Explorer 6.0, ORACLE10g R2 database and created a database MIS. Installed JDK 1.6 and ORACLE BIEE 10.1.3.4.1
    When I open ORACLE BI Presentation Services or BI Publisher from menu it is giving
    “500 Internal Server Error” not opening into explorer. Attached is the screen shot for your review.
    The log says
    OracleJSP: oracle.jsp.provider.JspCompileException:
    Errors compiling:
    C:\obiee\OracleBI\oc4j_bi\j2ee\home\applicationdeployments\analytics\analytics\persistence\_pages\\_default.java
    An input/output error occurred
    Consult the following stack trace for detail
    java.io.IOException: cannot close class loader
    Caused by : java.lang.NullPointerException.
    All advice appreciated.
    Thanks

    Hello Brahmeshwar
    The defaulttrace error you are looking normally is just a warning, and can be simply ignored.
    Please search the Exception ID which you are seeing in the page, like "005056A0354D001F000000650000100C0004904D0B0E33C7"
    And check the detailed exception there.
    And please check whether you are getting any issue when accesing other J2EE apps like http://<host>:<port>/useradmin  or /nwa.
    Best Regards,
    Thunder

Maybe you are looking for

  • How  can you load local server urls on application start?

    Background: I've been searching for close to two days for an answer to this question, it's full of gotchas and I can't quite get it figured out. I have an application which contains several web services. These services load up listeners when the serv

  • CS4 + XP SP3 + Radeon X1300 + HP2465 monitor = Huge issues

    Hope someone can help me. I just installed the trial version of CS4 on a Dell Optiplex 745 running XP SP3 with a Radeon X1300 (with latest drivers) and HP2465 monitor. I have also installed LR 2.1 on the same machine a while ago and it works flawless

  • Site redesign

    Hi Folks, I need to redesign the hompage to my site: www.halesowen.ac.uk I've been told the news sections need to be bigger. I've tried scrapping the area on the right with the search, and extending the news sections across the rest of the page, but

  • Jtabbed pane question

    i have a jframe with mutltiple tabs... in each tab thee is a panel that have different components(text fields....) my question is lets say i write something in a textfield and change the tab and get back to that tab, how can i make it when this tab o

  • JWSDP Installation Problems

    Hi All, I have installed Java Web Services Developer Pack v1.0_01, on windows XP.The java runtime version is j2sdk1.4.0_02. I am not able to start the Tomcat server, i get the following error, Usage: java [-options] class [args...] (to execute a clas