Error nu00BA BF00020. Iban Code
HI.
I am trying to create a new bank but I dont now how to field the iban code, it gives me the error BF00020
Thanks
Dear Nereab,
please be kindly informed that:
the IBANs are stored in the application table TIBAN. If you transport
House Banks, no IBANs will be transported. You have to maintain the
entries in the target system again or you can transport them
separately (transport entries of table TIBAN).
The table TIBAN is defined as transportable. If you want to transport
this table, you have to call the transaction SM30, enter the table
V_TIBAN and press 'Transport'. In this way you will create a transport
request which can be imported to other systems. Please read SAP
note 497630.
I hope this helps You.
Mauri
Similar Messages
-
Hello All ,
I want to update IBAN code on vendor master data . There is an error message when I want to update it . IBAN is not valid.
Is there anybody see that kind of error ?
Thanks
DashHi Dash,
IBAN and SWIFT Code numbering are based on some logics like First four Chracters short name of the Bank, next two country code, next 4 city code + branch code.
It does happen that while making the bank master data we give wrong IBAN code, to avoid that normally a check programme or validation rule is set. Check this, you can debug.
If you are getting the error in vendor master data, check in FI03 if this IBAN code exist for the given Bank, there error could be because of that.
Hope this helps
Regards
Bharat -
I have taken the cfdump for tmpqry and it shows all data for
the range ( No error at this step ) . But when we exceute this
dbquery we get below mentioned error .
<cfquery name="qry" dbtype="query" >
SELECT *
FROM tmpqry
ORDER BY #arguments.colSort# ASC
</cfquery>
senerio:
I am using createobject to create a reference for component
and call MDArraySort function in the cfc and getting this error .
'The system has attempted to use an undefined value, which
usually indicates a programming error, either in your code or some
system code.
Null pointer is undefined.... '
i am using this code in a cfc file.
<cffunction name="MDArraySort" Returntype="query"
access="public" >
<cfargument name="colArray" type="array"
required="true">
<cfargument name="colNames" type="string"
required="true">
<cfargument name="colSort" type="string"
required="true">
<cfargument name="sensorIDs" type="string"
required="true">
<cfscript>
var tmpqry = Querynew(arguments.colNames);
var qRow = QueryAddRow(tmpqry, Arraylen(arguments.colArray)
</cfscript>
<cfloop from="1" to="#Arraylen(arguments.colArray)#"
index="qRowIndex">
<cfscript>
sIndexinSensorIDs = colArray[qRowIndex]["SENSOR"]&"##";
Temp_readin_code =
colArray[qRowIndex]["READING_CODE"]&"##";
QuerySetCell(tmpqry, 'SENSOR', sIndexinSensorIDs,
qRowIndex);
QuerySetCell(tmpqry,
'TYPE',javacast('String',colArray[qRowIndex]["TYPE"]), qRowIndex);
QuerySetCell(tmpqry, 'TIMESTAMP2',
LSParseDateTime(colArray[qRowIndex]["TIMESTAMP2"]), qRowIndex);
QuerySetCell(tmpqry,
'ORDER_BY_PARAM',javacast('String',colArray[qRowIndex]["ORDER_BY_PARAM"]),
qRowIndex);
QuerySetCell(tmpqry, 'READING_CODE',Temp_readin_code ,
qRowIndex);
QuerySetCell(tmpqry,
'READING',javacast('String',colArray[qRowIndex]["READING"]),
qRowIndex);
QuerySetCell(tmpqry,
'PK_READING',javacast('String',colArray[qRowIndex]["PK_READING"]),
qRowIndex);
QuerySetCell(tmpqry,
'ALARM_STATUS',javacast('String',colArray[qRowIndex]["ALARM_STATUS"]),
qRowIndex);
QuerySetCell(tmpqry, 'DURATION',
javacast('String',colArray[qRowIndex]["DURATION"]), qRowIndex);
QuerySetCell(tmpqry,
'DESCRIPTION',javacast('String',colArray[qRowIndex]["DESCRIPTION"]),
qRowIndex);
</cfscript>
</cfloop>
<cfquery name="qry" dbtype="query" >
SELECT *
FROM tmpqry
ORDER BY #arguments.colSort# ASC
</cfquery>
<cfreturn qry >
</cffunction>
It is working fine for some date range and and getting above
mentioned error in sone situation .Hi All ,
Thank you for your support ,
Finally i have fix the issue using some changes in my
function in cfc .
<cffunction name="MDArraySort" Returntype="query"
access="public" >
<cfargument name="colArray" type="array"
required="true">
<cfargument name="colNames" type="string"
required="true">
<cfargument name="colSort" type="string"
required="true">
<cfargument name="sensorIDs" type="string"
required="true">
<cfscript>
//Declare variable collection used in function as local
--->
var tmpqry =
Querynew(arguments.colNames,"CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_DATE,CF_SQL_VARCHAR,CF_ SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR");
var qRow = QueryAddRow(tmpqry,
Arraylen(arguments.colArray));
</cfscript>
<cfloop from="1" to="#Arraylen(arguments.colArray)#"
index="qRowIndex">
<cfscript>
// Populate the query table
QuerySetCell(tmpqry, 'SENSOR',
colArray[qRowIndex]["SENSOR"], qRowIndex);
QuerySetCell(tmpqry,
'TYPE',arguments.colArray[qRowIndex]["TYPE"], qRowIndex);
QuerySetCell(tmpqry, 'TIMESTAMP2',
LSParseDateTime(arguments.colArray[qRowIndex]["TIMESTAMP2"]),
qRowIndex);
QuerySetCell(tmpqry,
'ORDER_BY_PARAM',arguments.colArray[qRowIndex]["ORDER_BY_PARAM"],
qRowIndex);
QuerySetCell(tmpqry, 'READING_CODE',
colArray[qRowIndex]["READING_CODE"] , qRowIndex);
QuerySetCell(tmpqry,
'READING',arguments.colArray[qRowIndex]["READING"], qRowIndex);
QuerySetCell(tmpqry,
'PK_READING',arguments.colArray[qRowIndex]["PK_READING"],
qRowIndex);
QuerySetCell(tmpqry,
'ALARM_STATUS',arguments.colArray[qRowIndex]["ALARM_STATUS"],
qRowIndex);
QuerySetCell(tmpqry, 'DURATION',
arguments.colArray[qRowIndex]["DURATION"], qRowIndex);
QuerySetCell(tmpqry,
'DESCRIPTION',arguments.colArray[qRowIndex]["DESCRIPTION"],
qRowIndex);
</cfscript>
</cfloop>
<cfquery name="qry" dbtype="query" >
SELECT *
FROM tmpqry
ORDER BY #arguments.colSort# ASC
</cfquery>
<cfreturn qry >
</cffunction>
Rajesh
SCMS
India -
Error while deploying WDJ code
Hi All,
I am getting the following error while deploying WDJ code in NWDS .
1 . The project was not built due to classpath errors (incomplete or involved in cycle).
2 . Missing required library: 'com.sap.security.api.jar'.
I have put the jar file into the project path but still then i am getting these errors . Please help .
Thanks in advance,Hi,
If u are using simple project then then adding jar into application property would do but if using DC then u must follow below procedure.
You cant just add any external jar file into a DC project.
There is only one way to add a external jar file is by using external library project.
1.create an external library project type DC.
2. put your external jar file into its lib folder.
3. create its public part of type SDA( Assembly if using CE)...and API( Compilation if using CE).
4. just use SDA public part into your webdynpro project as used DC.
5. and when you deploy your webdynpro project on server, this file will also get deployed... remember to use SDA public part..
Regards
Surender Dahiya -
Error while running transaction code f-42
hi all,
i am getting an error while running t code F-42.
Error is 'Global Number Parameter Is Missing'.
Please solve this
Thanks in AdvanceHi,
Check Global parameters settings at OBY6.
Thanks!
Assign points
Zia -
Error while installing Skype; code 1603
Good evening,
Today my girlfriend tried to update her Skype but she got an error code:
- You can not remove the older version of Skype / tm 6.18. Contact your technical support group
- Error while installing Skype; code 1603
She tried some solutions I believe but nothing seemed to help, I'm not sure what she did so far, I guess it's not to much. Maybe somebody got an idea what it can be? Please help.
Netbook: Acer
Windows 7
Thanks in advance, I would really like to know the solution since I can't wait to be able to Skype with her in a normal way again.
Greetings,
PS: Lately when I was spending time on Skype with her I barely saw her, and we thought that updating her Skype might solve the problem, somebody knows if this would solve her problem? Or maybe it's a problem with her internet?Thanks for the fast reply, but we are not quite there yet unfortunatly.. When she tries to download http://download.skype.com/msi/SkypeSetup_6.18.0.105.msi she gets the message:
The Installed Product does not match the installation source(s). Until a matching source is provided or the installed product and source are synchronized, this action can not be performed.
So we can't really get started till this is solved. You might know a solution?
We also tried the http://support.microsoft.com/mats/Program_Install_and_Uninstall/en We got quite far with this but in the end we had 2 messages:
- Cannot install or uninstall a program (Not fixed)
- Corrupt Patch Registry keys (Fixed)
Is this a good sign? I really don't know myself.
Thanks in advance again!
Greetings -
I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta -
Idoc Error: Could not find code page for receiving system
hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty -
EDI invoice idoc error "Enter a tax code in item 000001"
Hello,
I am trying ot post the EDI invoice but the idoc getting failed by giving error "Enter a tax code in item 000001".
Even i entered the tax code in my idoc, system not taking and also as i have maintained the table OBCD & OBCE but system not consider it.
If i maintained the tax code in my PO then it is posting the invoice with PO tax code sucessfully.
Please let me know, Is their any other setting needs tobe done for idoc to post the invoice without maintained TAX CODE in PO ?
Thanks in advance
Regards,
SatishNo option available .you have to maintain tax code in PO.
Try your luck with following option Still not sure as it works only if you call transaction MIRO
OLMR -- incoming invoice -- maintain default value for tax codes -
XI - Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT
I am using HTTP adapter to post XML PO to vendor's site. We are having this problem with one of our vendor when PO's has more than 15 line items. XI server is getting error-"Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT". Actually PO is posted good for the first time on vendor's site but XI is getting above error message and it keeps posting it again. Is there anyway to stop it otherthan manually stopping the XI message? Is there anyway to increase the wait time of the XI server to get the message.
Thanks in advance.
Mrudula PatelI'm getting the same issue "500 TIMEOUT error" in runtime work bench-->IE--->Test Message. When i manually trigger the file.
The issue is basically from 01-01-2015 02:00 pm to 02-01-2015 01:am , File is picked from source ftp folder and places in archive but xml messages are not reflecting in SXMB_MONI.
Today suddenly after 01:00 am messages are successfully processing.
Please help on this issue. Many Thanks. -
my iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?
No need to Double Post... It is considered impolite.
https://discussions.apple.com/message/20652820#20652820 -
ERROR ITMS-9000: Missing Code Signing Entitlements when adding app to Apple App Store
My client is getting the following error when sending my app (compiled in Flash Pro CC 2014 with AIR SDK 15.0.0.356) to the Apple app store:
ERROR ITMS-9000: "Missing Code Signing Entitlements. No entitlements found in bundle
'com.xxxxxx.xx.xxx' for excutable 'payload/xxxxx.app./xxxx'.""
He is saying that I need to send them the entitlements file.
I can't find out any information about this with regards to Adobe Air compiled iOS apps, apart from this old post:
Adding iOS entitlements to AIR apps
which states that 'the packager configures the entitlements file '
Can anyone explain what might be missing here?
Thanks,
Alan.It looks as if this problem is solved by doing step 2 from here:
http://dev.mlsdigital.net/posts/how-to-resign-an-ios-app-from-external-developers/
It basically states that the client needs to produce the entitlements file and lists the following that the client will provide themselves:
A “Mobile Provisioning Profile”
An “Entitlements.plist”
An “iOS Distribution Certificate”
iReSign OS X app (or you could use command line)
Hope this helps someone. We've run into quite a few problems trying to get the Flash Air compiled App to both enterprise and Apple Store as it can't come from us (the developers) it has to be signed and delivered from the client. -
BW Monitor error Could not find code page for receiving system
Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
SrinivasThe log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get. -
Impossible to enter IBAN code for Serbian vendor
Hi,
I want to enter the IBAN code for a vendor from Serbia (Country code: RS), but I get the message BF00016: generation not possible/
The bank details are:
IBAN: RS35160053020009138705
BIC: DBDBRSBG
Banca Intesa a.d. Beograd
Milentija popovica 7b
11070 Novi Beograd
SERBIEN
What could be the reason?
Thank you for your advice.
Kind regards,
LindaHi Linda,
Do you have note 1032697 implemented in your system (or actually the instruction it gives)?
Regards,
Eli -
hi i am receiving "exact fetch returns more than requested number of rows oracle error". but i am not able to locate the error in the below code. Any help would be appreciated!!!
CREATE OR REPLACE PROCEDURE load_scene_collection_item (
--pdname VARCHAR2,
-- LOCATION TO ADD/CHANGE below!!!
pITEM_TYPE_ID INTEGER,
pSCENE_COLLECTION_ID INTEGER,
pCOLLECTION_ITEM_NAME VARCHAR2,
pCOLLECTION_ITEM_DESC VARCHAR2,
pDEFAULT_COORD_X NUMBER,
pDEFAULT_COORD_Y NUMBER,
pDEFAULT_COORD_Z NUMBER,
pDEFAULT_WIDTH NUMBER,
pDEFAULT_HEIGHT NUMBER,
pDEFAULT_ROTATION INTEGER,
pDEFAULT_ALPHA INTEGER,
pfname VARCHAR2) IS
src_file BFILE;
dst_file BLOB;
lgh_file BINARY_INTEGER;
BEGIN
src_file := bfilename('BUSINESSBLOBSIMAGES', pfname);
-- insert a NULL record to lock
Insert into SCENE_COLLECTION_ITEM
( ITEM_TYPE_ID,
SCENE_COLLECTION_ID,
COLLECTION_ITEM_NAME,
COLLECTION_ITEM_DESC,
COLLECTION_ITEM_IMAGE,
DEFAULT_COORD_X,
DEFAULT_COORD_Y,
DEFAULT_COORD_Z,
DEFAULT_WIDTH,
DEFAULT_HEIGHT,
DEFAULT_ROTATION,
DEFAULT_ALPHA,
CREATE_USER,
CREATE_DATE)
Values ( pITEM_TYPE_ID, pSCENE_COLLECTION_ID, pCOLLECTION_ITEM_NAME, pCOLLECTION_ITEM_DESC, EMPTY_BLOB(),
pDEFAULT_COORD_X,
pDEFAULT_COORD_Y,
pDEFAULT_COORD_Z,
pDEFAULT_WIDTH,
pDEFAULT_HEIGHT,
pDEFAULT_ROTATION,
pDEFAULT_ALPHA,
sys_context('USERENV', 'OS_USER'),
sys_extract_utc(systimestamp))
RETURNING COLLECTION_ITEM_IMAGE INTO dst_file;
-- LOCATIONs(2) TO ADD/CHANGE above!!!
-- lock record
SELECT COLLECTION_ITEM_IMAGE
INTO dst_file
FROM SCENE_COLLECTION_ITEM
WHERE ITEM_TYPE_ID = pITEM_TYPE_ID
AND SCENE_COLLECTION_ID = pSCENE_COLLECTION_ID
AND COLLECTION_ITEM_NAME= pCOLLECTION_ITEM_NAME
AND COLLECTION_ITEM_DESC= pCOLLECTION_ITEM_DESC
AND pDEFAULT_COORD_X = DEFAULT_COORD_X
AND pDEFAULT_COORD_Y = DEFAULT_COORD_Y
AND pDEFAULT_COORD_Z = DEFAULT_COORD_Z
AND pDEFAULT_WIDTH = DEFAULT_WIDTH
AND pDEFAULT_HEIGHT = DEFAULT_HEIGHT
AND pDEFAULT_ROTATION = DEFAULT_ROTATION
AND pDEFAULT_ALPHA = DEFAULT_ALPHA
FOR UPDATE;
-- LOCATION TO ADD/CHANGE above!!!
-- open the file
dbms_lob.fileopen(src_file, dbms_lob.file_readonly);
-- determine length
lgh_file := dbms_lob.getlength(src_file);
-- read the file
dbms_lob.loadfromfile(dst_file, src_file, lgh_file);
-- update the blob field
UPDATE SCENE_COLLECTION_ITEM
SET COLLECTION_ITEM_IMAGE = dst_file
WHERE ITEM_TYPE_ID = pITEM_TYPE_ID
AND SCENE_COLLECTION_ID = pSCENE_COLLECTION_ID
AND COLLECTION_ITEM_NAME= pCOLLECTION_ITEM_NAME
AND COLLECTION_ITEM_DESC= pCOLLECTION_ITEM_DESC
AND pDEFAULT_COORD_X = DEFAULT_COORD_X
AND pDEFAULT_COORD_Y = DEFAULT_COORD_Y
AND pDEFAULT_COORD_Z = DEFAULT_COORD_Z
AND pDEFAULT_WIDTH = DEFAULT_WIDTH
AND pDEFAULT_HEIGHT = DEFAULT_HEIGHT
AND pDEFAULT_ROTATION = DEFAULT_ROTATION
AND pDEFAULT_ALPHA = DEFAULT_ALPHA
-- LOCATION TO ADD/CHANGE above!!!
-- close file
dbms_lob.fileclose(src_file);
END load_scene_collection_item;
Thanks in advance!!!!Hi PaulHorth,
Thanks for the quick reply.
Actually, i am getting error while updating the records.
below is the error message:
Error starting at line 1 in command:
exec load_scene_collection_item(3,15,'2 Lane 4way Stop','4 Way Stop Intersection with 2 lanes in each direction',0,0,0,400,517,0,1,'2 Lane 4way Stop.PNG');
Error report:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "DP_OWNER.LOAD_SCENE_COLLECTION_ITEM", line 55
ORA-06512: at line 1
01422. 00000 - "exact fetch returns more than requested number of rows"
*Cause: The number specified in exact fetch is less than the rows returned.
*Action: Rewrite the query or change number of rows requested
Maybe you are looking for
-
My brother-in-law tried to back up my music on a flash drive. It now appears as though I don't have an I Tunes account. Worse yet, the flash drive only contains all the artists for the alphabet "A"! Can someone PLEASE help me?
-
I'm trying to recover my files through the boot camp option on the windows side. Is there anyway to run something like disk warrior or windows alternative to repair the partition from the windows side. I don't think I'm going to be able to get all
-
I've never used RoboHelp for Word, but had a project come up at work. I'm having a few problems with it. The first problem has been brought up in this forum before, but I did not see an answer for it. When I create a hyperlink in the .doc and/or the
-
Crystal 2011 Failed to load database information error when upgrading from 2008.
I'm unable to get past this error. Error in File ~tmp34887ec5d7e6780.rpt: Failed to load database information. Configured Windows 2008 64 bit Server Installed Crystal Report Server 2011 - BI Enterprise 14.0.0 Oracle 11g 64 bit version I can test th
-
Just an hour ago everything was working as usual. Then suddenly, half of my fonts don't show the 'sample' preview in the drop menue, and while scrolling the list, if I scroll over one of the empty fonts, this error pops up: Selected font failed durin