Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

Hi Gurus,
Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
The process chain contains processes for:
- starting the process chain
- executing infopackage (for loading data to 0figl_o10),
- ACR (activate data in 0figl_o10)
- delete index 0figl_c10
- DTP loading data from 0figl_o14 to 0figl_c10
- executing infopackage 80FIGL_O10
- creating index in 0figl_c10
- building DB statistics
- rolling up aggregates in 0figl_c10
- deleting of requests from the changelog 0figl_o10
- deleting of requests from PSA (0fi_gl_10)
How to find what cause that error.
Regards,
Leszek

Hi,
A SAP consultant told me to ignore that error.
Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
The problem is described in sap note: 883745.
Regards, Leszek

Similar Messages

Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in versn D.

Hi friends ,
I am getting below error while doing the BI Content Activation.Please guide me for possible solution :this is for two three infoobjects.Do in need to reconfigure the system??
Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version
'D'
    Message no. RSO252
Diagnosis
    You wanted to generate an object with the name '0DB87SIC1' (in transport
    request IOBJ) of type 'InfoObject' (TLOGO). This is, however, not
    available in the BW Repository database. It does not exist in the
    requested version D. If the version is 'D' then it is possible that an
    error arose during the delivery or installation. If the version is 'A'
    then the Object was either not created or not activated.
System Response
    The object was not taken into account in the next stage of processing.

hi,
This is not an error but while installing bunch of infoobjects, it will say which one of them it doesnot have in the system could be the problem in patches.Could be very old.
Hence better you create a infobject equivalent of the object you require and use it and goahead.
Thanks
Kumar

Unable to Transport Querys Object (ELEM) of type 'Query' is not available in version 'A'

Hi,
We need to transport some querys from production BW 7.3.1SP7 to synch with Dev. I know, I know but had no choice but to created querys in PBW due to no data in DEV...
In RSA1, we collect query and get errors for every object (ckf,rkf, vars etc) and when changing dsiplay from hiearchy to list, there are no objects included under the query element.
Opened the system in SCC4 for automatic recording of changes and changes to repository and cross clinet customization allowed and changed the client role to Test.
Tried opening and resaving the query in query designer.
Query is active in table RSRREPDIR
Checked SCN and OSS have yet to find a solution
http://scn.sap.com/thread/1758171
http://scn.sap.com/thread/1623756
Here are the error details
Object '4T3M5JI7050ENPG6G336XWYNK' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '4T3M5JI7050ENPG6G336XWYNK' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Thank you so much for your time!
Lee Lewis

This is an SAP BUG which is corrected by this note:
> 1762785 - Object '!XYZ...' (ELEM) of type Query is not available.
> 1816332 - Object 'XYZ...' (ELEM) cannot be collected (RSO296)
Lee Lewis

Object '43TH...' (ROUT) of type 'Routine' is not available in version 'A'

Hello all,
I having this situation, first let me tell you that we have transported the queries from dev to qa and then we had to open the qa system to modify our queries. There were a lot of modifications done to the queries in QA and so now I am trying to transport the queries back to Dev so that we can transport it again via normal route.
When I am trying to collect the query in QA I am getting a lot of errors something like this:
Object '43TH...' (ROUT) of type 'Routine' is not available in version 'A'
You wanted to generate an object with the name '43TH...' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Object '43TH...' (RSFO) of type 'BW Formula' is not available in version 'A'
You wanted to generate an object with the name '43TH..' (in transport request RSFO) of type 'BW Formula' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Can someone tell me why is it erroring out and where can I look to fix it.
Thanks,
Raj

Raj,
Can you please check the formula you mentioned in the Table RSZCALC Table, Provide ELTUID = "43TH...". check the Version whether it is 'A' or 'D'.
If it is not available in 'A' Version, then check the Formula creation.
Probably, it may help you.
Regards,
Nagesh Ganisetti.
Assign points if it helps.

Error Messages when Transport Process Chain to Production

I am able to transport three related process chain to Q, but failed in Prodtion. Can anyone look at my error messages? Thank you!
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC
Version 'M' of chain USFCMD was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process TRIGGER START_USLDFORECT_MD in chain USFCMD:
Version 'M' of chain USLDFC was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process TRIGGER START_USLDFORECT in chain USLDFC:
Version 'M' of chain USLDFORECT was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
Results of check for process TRIGGER START_USLDFORECT_TD in chain USLDFORECT:

Try to transport the process chain by removing the process chain from schedule.
Go to Process chain select execution in menu..go for option "Remove from schedule"
It may help you.
Regards,
Srinivas.

Error "Lock not set for: Generate index" while running process chain

SAP BI 7.0
SP 17
I am attempting to run a new process chain and the generate index steps are failing with the below errors:
"Lock NOT set forGenerate index"
"RSSM PROCESS INDEX terminated, because InfoCube/DSO object could not be locked."
The process chain just pauses. I let it finish once and it took 2 hours and then it gave the failure messages. I have looked in sm12 and can see the lock records when the process chain is running - unfortunately I can't make much of what's there - everything looks good to me. I also tried creating the indexes manually inside the cube and then re-ran, but still get the same error. Before running the process chain, I can get the indexes to check to green, but then after running the process chain they go back to red. I have attempted many things (including looking at other forum posts), but I still have the error. Please help. Thanks
Edited by: Brett Hutchinson on Feb 10, 2009 7:50 PM

Hello,
So Create index is getting failed in you PS right?
1)check if any other loads are running to the same CUBE(May be from other PC's also)
Goto Manage of the cube and check, some times it may happen if any Loads are running into cube I mean Load/DTP & roll up may be running.. if so wait till the others Loads(Jobs) get complete then Repeat the failed index
2) If the Create index is running for long time, then got RSDDV--> Select the CUBE then click on BIA index(Maintenance wizard), you can see a message if indexes are running , this will happen only when some one would have tried to generate the indexes manually and it may got failed due to some reason , since u are running it manually u couldn't identify whether it got failed or not unless you got to RSDDV and check. So delete the index here and then rebuild them through PC
Hope it helps!

Error in Transporting Process Chain in BI 7.0

Hi Gurus,
i m getting following error "Object 'DM' (APCO) of type 'Application' is not available in version 'A' " in BI 7.0 while transporting a process chain.
I thought it my have issues with version of process chain, but the proces chain is in A version still is gives above error.

[Hello Sonal,|http://chandranonline.blogspot.com]
APCO denotes the OLTP Application Component. So check all the Application Components used in the PC are available.
Also see
SAP Note 382471 BW-OLTP-APCO: How do I transport it?
[BI Content Delivery in OLTP Systems by SAP (SAP Library - Customer Content in OLTP Systems)|http://help.sap.com/saphelp_nw04s/helpdata/en/ca/85f911c4bda4479af0a062bd9dfa94/frameset.htm]
[Thanks|http://chandranonline.blogspot.com]
[Chandran|http://chandranonline.blogspot.com]

Object '485V83KBEXPI7' (ROUT) of type 'Routine' is not avble in D Version

Hi,
when i am installing BI Content Activation for InfoObject catalog 0MMPUR_CHA0,
InfoObject catalog remains Inactive and showing below error.
Object '485V83KBEXPI7VUNBAQ0D9UCR' (ROUT) of type 'Routine' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '485V83KBEXPI7VUNBAQ0D9UCR' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.

If you see so, then Goto BI Content in RSA1. Select Object Types>>> Infooject Catalog>> type ur Object name there. and transfer selections. When this object will come on ur rght panel, u can see it is in 3.5 version. Now click install now. this will get it in your rsa1 Modeling section. Then go there and say 'Migrate'.
Hope this helps.

Object 'AJS9H7GM38PGOU5HYFHLSBTTB' (ROUT) of type 'Routine' is not availabl

Hi,
I have a query in BI which shows the following error after dropping the same in Transport Connection bar in R.H.S panel.
Object 'AJS9H7GM38PGOU5HYFHLSBTTB' (ROUT) of type 'Routine' is not available in version 'A
Object 'AHNJBVI0PUYSJNYXQRS2Y06NJ' (ROUT) of type 'Routine' is not available in version 'A
Object '8ASNUKY1YQJZ8B85VEJPS1DPR' (ROUT) of type 'Routine' is not available in version 'A
Object '88NXP8ZGLCTB351LNQU6XPQJZ' (ROUT) of type 'Routine' is not available in version 'A
But after collecting the query and query elements, I can see the afore mentioned 4 query elements are not getting collected under the transport req but the Req itself shows the status GREEN (after collection).
After releasing the req when I am trying to move it to PRD, the system is throwing error. I am unable to import the query in PRD.
Now can any one suggest me for the next step.
Also I want to know how and where I can search for those elements in BI system?
Thanks in advance.
Edited by: Ajanta Dutta on Jul 20, 2010 2:50 PM

Hi,
I will answer your questions one by one.
During the initial transport, system was showing that: there are few elements which has been locked by other TR Request. I unlocked the task and the request using SE03 and then again tried to collect the query and query elements in a new TR Request. I have checked option Only Necessary Objects in Grouping, Collection mode: collect automatically, Display: Hierarchy
But I cannot find those 4 query elements under query elements list. System is unable to collect those 4 query elements under the TR Request. These 4 elements are of type ROUTINE and not in Active version, as you can see from the message itself.
Rest query elements are getting collected under the TR Request. Only those 4 query elements are missing. Now pls suggest me how to proceed. How and where can I find those query elements (Routines)? Coz the tech name for those query elements are specific to query itself. I have no idea where to search for those 4 elements.
Object 'AJS9H7GM38PGOU5HYFHLSBTTB' (ROUT) of type 'Routine' is not available in version 'A
Object 'AHNJBVI0PUYSJNYXQRS2Y06NJ' (ROUT) of type 'Routine' is not available in version 'A
Object '8ASNUKY1YQJZ8B85VEJPS1DPR' (ROUT) of type 'Routine' is not available in version 'A
Object '88NXP8ZGLCTB351LNQU6XPQJZ' (ROUT) of type 'Routine' is not available in version 'A
Thank you.
Edited by: Ajanta Dutta on Jul 21, 2010 9:18 AM
Edited by: Ajanta Dutta on Jul 21, 2010 9:21 AM

Errors transporting process chains

Hi,
we got some problems while transporting process chains.
The error occurs in the method execution. The transport log says:
Start of the after-import method for object type R3TR RSPC (Activation Mode).
Version 'M' of chain <name of the chain> was saved without checking.
0 Chains Were Selected.
Message no. RSPC031
Specifying process chain ID <name of the chain>, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
The function is terminated.
There is probably an error in the program. Look for corresponding notes.
We can't find any notes for this error message. The whole thing is confusing, because sometimes we find the chain in the target system, sometimes not.
Has anybody experiences with this kind of problem and how to solve it?
Thanks.
Knut

Hi,
Did you make sure that you transported all the process variants that the chain is using?
Please, check that by going to transport connection and transporting your process chain.
We always use that method to transport process chains: first getting all variants from the chain on transport connection and putting them on a transport request. Second establishing the start time of the PC and finally activating and scheduling the PC. You then release and transport that order.
Which version is your system? 3.0B?
Regards,
David.
Message was edited by: David Sirvent

Error on Transporting Process chain

Hallo,
Can you please help me with the following error?
I am trying to transport a process chain into productive system and I receve the error below:
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain SV_CSM_MD_R3_START_VIL was saved without checking
Error in remote call of destination ALE_EP1010_BTC
Start of the after-import method RS_RSPT_AFTER_IMPORT for object type(s) RSPT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for RSPC L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Could you please help me?
Thanks
Ramona

Hello Ramona,
Please check the following points,
1. Process Chain is active without any error before transporting
2. All the Processes, variants are collected in the transport request and package.
3. Do set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors
Thanks
Chandran

Error in remote call of destination - when transporting process chain

Hi all,
I have earlier not had troubles transporting process chains from development system to test. Now I get the following error
Error in remote call of destination BW Test
Message no. RSPC051
Diagnosis
The following error occurred during the remote function call for destination BW Test:
Name or password is incorrect (repeat logon)
System Response
A short dump has probably been written in the other system.
Procedure
Look at the short-dump overview in the other system.
I know we have a transaction (RSTPRFC) where we give the password for the user that will do the activation of the PC after transport, but checking with the basis guy, and according to him there has not been any changes to this user. (As the user is the same as the RFC user used when setting up source systems). Running a check on the source systems from RSA1 gives green on all, so then the user should be correct...
(there is also no short dump available in the other system)
Does anyone have a clue on what could be done to locate the error..?
Thanks
Regards,
Øystein

Hi,
you are both right, and I got the issue corrected. In SM59 i have an ABAP connection that when checking it, gave me a logon error. When getting this connection working (by giving another password) and then setting the same password in RSTPRFC, the transport worked.
I'm just not sure I understand why this became an issue.
But anyway, thanks for the input.
Regards,
Øystein

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

When i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

Hi Kashmore,
Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
Cheers,
Kartikay Sharma

My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?

My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?

Okay. I will try this again. I did remove and reinstall earlier, but will
do it now.
regards, Mike
On Wed, Oct 15, 2014 at 12:55 PM, Sabian Zildjian <[email protected]>

Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

Similar Messages

Maybe you are looking for