Error occur during Autoinvoice
Following I post the error msg of the point of error occured during performing Autoinvoice. it seem the error is made by process 'raadhd' and used up all storage of the Rollback segment. After the error occured, the system will becoming slow and cannot be shutdown. the way we can only do is recovery the oracle database from backup tape.
"raaild()- Current system time is 03-APR-2001 23:34:05
raadhd()+ Current system time is 03-APR-2001 23:34:05
WARNING: No default remit-to address found
100 row(s) updated Current system time is 03-APR-2001 23:34:05
97 row(s) updated Current system time is 03-APR-2001 23:34:05
100 fetched Current system time is 03-APR-2001 23:34:05
Updated 100 row(s) Current system time is 03-APR-2001 23:34:06
97 fetched Current system time is 03-APR-2001 23:34:06
Current system time is 04-APR-2001 07:33:04
ORA-01562: failed to extend rollback segment number 3
ORA-01650: unabl
Previous Messages (for Support Purposes)
Dumping data fetched from RA_BATCH_SOURCES"
Do you know what had been done during the process raaild() and how to avoid it happen again.
Thank you very much.
Wallace
email : [email protected]
Hi Wallace,
As I had suggested earlier, this should work with smaller data.
The Other option is to do the following as suggested in Note No 119658.1 on metalink:
You are running import and receive the following errors:
ORA-1562 failed to extend rollback segment number %s
ORA-1650 unable to extend rollback segment %s by %s in tablespace %s
Solution:
=========
- Make the rollback segments larger.
OR
- Use the COMMIT import parameter. Set COMMIT=Y. Using this option allows you to solve the problem without altering the sizes of the rollback segments.
Explanation:
============
Import commits after an entire table is loaded unless instructed otherwise. By specifying COMMIT=Y, you are directing the import utility to commit after each buffer of data has been loaded. This prevents the
rollback segments from getting too large.
Be aware this has a performance impact, but it allows the import to reach the end of the task without ORA-1562 and ORA-1650 errors.
I hope this helps. Please let me know your feedback.
Thanks and Regards,
Raj..
null
Similar Messages
-
Length error occurred during in IMPORT statement
Dear Friends,
(length error occurred during in IMPORT statement),when im using the SUBMIT syntax..can i know what is the reason.
Thanks
Rajkumar.AHello,
I would like to know how did you solve the issue as i came across the same issue.
Thanks,
FBK -
RC-00118: Error occurred during creation of database
adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
The environment settings are as follows ...
ORACLE_HOME : /u04/d01/tech_st/11.2.0
ORACLE_SID : JCLONE
TWO_TASK :
PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
The log information will be written to
/u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
Creating the control file for JCLONE_oracle database ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
Database mounted.
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01119: error in creating database file
'/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracle
sDbDomain : jtl.co.ke
sDbPort : 1524
sDbSid : JCLONE
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:595)
Current database Version is 11.2.0.2
Apps Version is 11.5.10.2
RUP version is 6
Forms Patchset version is 19
Please advise how to resolve this error ?
Regards
Mohammed.Please refer to these docs/links.
Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Error 1935 an error occurred during installation of assembly component
I get this message when trying to install Lightroom 4.3
error 1935. an error occurred during installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE} hresult 0X800700C1
I've tried installing with antivirus software shut down. I've reset the file system transaction log. I turned off the .net framework v 3.0 in the programs and features section of control panel. The only thing I haven't tried is deleting the .net framework because the other articles were unclear as to exactly what and how to delete them.
Please help!that looks like an ms error.
attach a screenshot, if you're not sure. -
Error occuring during import of certificate for SSO configuring in BI
Hi,
I am configuring the SSO with logon ticket for BI system.
I downloaded the certificate from portal server.
But while importing this certificate on R/3 server it shows error
"Error occurred during import"
Message no. TRUST008
Please suggest me any solution on it.
Thanks & Regards,
Vishal.Hi Vishal,
Probably the certificate already exists - see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0077873d-0b01-0010-1abb-cfbf21d1aa43 page 4.
Hope it helps
Detlev -
Error occurred during initialization of VM
im new to jdeveloper please anyone help me...
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Users\reir\AppData\Local\Temp\trustStore9189074039610736238.jks -javaagent:../modules/org.eclipse.persistence_1.1.0.0_2-1.jar -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Error opening zip file or JAR manifest missing : ../modules/org.eclipse.persistence_1.1.0.0_2-1.jar
agent library failed to init: instrument
Process exited.This issue is usally caused by missing rt.jar. It's a good idea to manually unpack libraries.
Look for your java library directory (usually jre<version>/lib) .
If you can see rt.pack and can't see rt.ajr -
make the follwoing (I consider you save this to a script file then run it and your JAVA_HOME is correctly set and you're using some sort of UNIX):
---------------------------------cut---------------------------------
#!/bin/sh
JH=${JAVA_HOME:-"/usr/java/jre1.5.0_04"}
UNPACK_EXE=$JH/bin/unpack200
if [ -f $UNPACK_EXE ]; then
chmod +x $UNPACK_EXE
PACKED_JARS="lib/rt.jar lib/jsse.jar lib/charsets.jar lib/ext/localedata.jar lib/plugin.jar lib/javaws.jar lib/deploy.jar"
for i in $PACKED_JARS; do
srcFile=${JH}/`dirname $i`/`basename $i .jar`.pack
dstFile=${JH}/$i
if [ ! -f $srcFile ]; then
printf "Error: Unable to find %s. Please, check out your installation.\n" $srcFile
exit 1
fi
$UNPACK_EXE $srcFile $dstFile
if [ ! -f $dstFile ]; then
printf "Error: unpack could not create %s. Please refer to the Troubleshooting\n" $dstFile
printf "Section of the Installation Instructions on the download page.\n"
exit 1
fi
rm -f $srcFile
done
else
printf "Error: unpack command could not be found. Please refer to the \n"
printf "TroubleShooting Section of the Installation Instructions on \n"
printf "the download page.\n"
printf "Please do not attempt to install this archive file.\n"
exit 2
fi
---------------------------------cut--------------------------------- -
Error occurred during initialization of VM. Could not reserve enough space
Dear All,
I am trying to install SAP NetWeaver 7.0 SR2 SP9 on Oracle 10.2 and platform is Windows 2003 32 bits. While installing, in t he restarting the JAVA Instance step, server0 node is getting shutdown. When I further analyzed dev_server0 log, I could get below useful information:
Error occurred during initialization of VM
Could not reserve enough space for object heap
[Thr 6008] JLaunchIAbortJava: abort hook is called
[Thr 6008] **********************************************************************
*** ERROR => The Java VM aborted unexpectedly.
*** Please see SAP Note 943602 , section 'Java VM crashes'
*** for additional information and trouble shooting.
[Thr 6008] JLaunchCloseProgram: good bye (exitcode = -2)
I referred the note mentioned above and it inturn referred to note# 940893. I followed many other sap notes also. However my above problem did not solve yet. I have checke my JAVA SDK version also. It is j2sdk1.4.2_11 and seems to be fine. My systems memory is 3 GB and I gave 20 GB as Virtual memory. I dont think that it should be a memory problem. However somewhere I am lost and can not get the grip over the problem to resolve it.
May I request all of you to kindly help me on above issue? Please let me know if you need any more information.
Waiting for your kind replies.
Regards,
FaisalDears,
Thank you very much for your replies. The heap size was 1024. I changed it to the below:
Heap Size=512 (earlier 1024)
Changed below paramters in configtool:
-Xmx512m (earlier 1024)
-Xms256m (earlier 1024)
Hope this information will be helpful to others as well.
Once again, I thank both of you to guide me in proper directions.
Regards,
Faisal -
Error Occurred During Installation of Lightroom 5
I can't seem to get Lightroom 4 or 5 to download onto my computer. Both versions give me the same error:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x800736FD.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x800736FD.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
Lightroom 4 came in disc from with my new camera and Lightroom 5 was an internet download. Can anyone help me with this?Salut
Redémarrer votre ordinateur. Désinstallez et puis essayez de télécharger à partir du lien ci-dessous.
Activer avec le numéro de série de votre disque.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5857 -
Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Hello all,
I ran into some error during installation. And I need your help in solving this problem. The error occurs during Step Configure (Configuration assistant "Repository Configuration" has failed) and the Repository Configuration in the Installation Progress Details view.
And the error is shown below is from ViewLog and from the terminal where I launched runInstaller. Thank you all in advance for your helps.
ViewLog:
INFO: oracle.sysman.top.oms:Completed Prereq check
INFO: oracle.sysman.top.oms:The plug-in Plugins Prerequisites Check has successfully been performed
INFO: oracle.sysman.top.oms:About to execute plug-in Repository Configuration
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.RepositoryConfiguration
INFO: oracle.sysman.top.oms:Classpath = /test/vince/em_install/oem_mgr/oms/sysman/jlib/emprereqkit.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emCoreSDK.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/omsConfig.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emcore_client.jar:/test/vince/em_install/oem_mgr/oms/../modules/com.bea.core.apache.log4j_1.2.13.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcucommon.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emagentSDK.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.dms_11.1.1/dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcu.jar
INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Inside perform method
INFO: oracle.sysman.top.oms:Running the Schema Action...
INFO: oracle.sysman.top.oms:Setting required properties
INFO: oracle.sysman.top.oms:REPOS_USER: SYSMAN
INFO: oracle.sysman.top.oms:SYS_USER: SYS
INFO: oracle.sysman.top.oms:CONNECT_STRING: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:ORACLE_HOME: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:mgmtTabLoc :
INFO: oracle.sysman.top.oms:confDataTabLoc :
INFO: oracle.sysman.top.oms:defaultDataFileLoc :
INFO: oracle.sysman.top.oms:ad4jDataTabLoc :
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:The required parameters are set for schemamanager
INFO: oracle.sysman.top.oms:Starting both repos upgrade and transx loading in parallel
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: create oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:create_process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:The command run for transx is /test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl))) -action transx -repos_user SYSMAN -dbUser SYS -mwHome /test/vince/em_install/oem_mgr -mwOraHome /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:processing arguments
INFO: oracle.sysman.top.oms:compiling arguments for validation
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms: Enter SYSMAN repository password :
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:Verify :
INFO: oracle.sysman.top.oms:Enter password for: SYSMAN
INFO: oracle.sysman.top.oms: done checking required user credentials...
INFO: oracle.sysman.top.oms:done creating arguments...
INFO: oracle.sysman.top.oms:creating logger..
INFO: oracle.sysman.top.oms: Connection exception in action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: no action logger file name from previous session
INFO: oracle.sysman.top.oms: action logger filename after search: emschema.log
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:already exists: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:oracleHome: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:connect_string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:done connection validation without error
INFO: oracle.sysman.top.oms:action to perform is: transx
INFO: oracle.sysman.top.oms:action to be performed:TRANSX
INFO: oracle.sysman.top.oms:action is transx - non RCU based action
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log.TRANSX
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms:newly created: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:process_id:132hgzixoqx34
INFO: oracle.sysman.top.oms:Initialization...
INFO: oracle.sysman.top.oms:Driver: oracle.jdbc.driver.OracleDriver
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:exiting the thread...
INFO: oracle.sysman.top.oms:[Initializing the EM RCU Runner, Failed Parameter Validation]
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 255
INFO: oracle.sysman.top.oms:transx_retCode:255
INFO: oracle.sysman.top.oms:The transx action failed, Run the RepManager with -action transx
INFO: oracle.sysman.top.oms:process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
INFO: oracle.sysman.top.oms:1):
ORA-65096: invalid common user or role name
File:/test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/sql/core/latest/admin/admin_create_repos_user.sql
Statement:CREATE USER SYSMAN IDENTIFIED BY ****** DEFAULT TABLESPACE MGMT_TABLESPACE QUOTA UNLIMITED ON MGMT_TABLESPACE TEMPORARY TABLESPACE TEMP
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration has failed its perform method
Terminal:
PLUGIN_DEP_LIST={}
PLUGIN_PURGE_LIST={}
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Processing command line ....
Repository Creation Utility - Checking Prerequisites
Checking Global Prerequisites
Repository Creation Utility - Checking Prerequisites
Checking Component Prerequisites
Repository Creation Utility - Creating Tablespaces
Validating and Creating Tablespaces
Repository Creation Utility - Create
Repository Create in progress.
Percent Complete: 5
Percent Complete: 30
Percent Complete: 55
Percent Complete: 80
RCU-6130:Action failed - RCU-6134:Error while trying to execute JDBC action.
Repository Creation Utility: Create - Completion Summary
Database details:
Connect Descriptor : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Connected As : SYS
RCU Logfile : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/rcu.log
RCU Checkpoint Object : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager//RCUCheckpointObj
Component schemas created:
Component Status Logfile
EM Repository Creation Configuration Failed No log created
EM Repository Init Configuration Failed No log created
EM Repository Common Failed /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/em_repos_common.log
Repository Creation Utility - Create : Operation CompletedYou are using DB12 as EM repository which is not certified. From the log, ORA-65096: invalid common user or role name , some people have reported similar issue while using DB12 as their repository.
If this not the case then log an SR with oracle support and upload the logs:
- $ORACLE_HOME/sysman/log/schemamanager zipped
- $ORACLE_HOME/cfgtoollogs/ zipped
- central inventory logs -
Problem: An error occured during the uploading process.
Hello! I've searched around but I am having difficulty finding a solution to this problem.
I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab. This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process. Please try again later." However, it eventually started working. It is now a few weeks later, and I am having the very same issue. I am unable to upload to YouTube or any other service through the Share tab. Even loading the software itself, the opening splash screen is unable to grab my Adobe ID. It never stops "Gathering User Info..."
Steps I have tried:
Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
Checked router settings.
Enabled DMZ on router and linked it to this specific computer.
Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software. This has continued to baffle me though, and finding help is difficult. Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video. The YouTube HD setting has been great for me in the past, as files are small but still look great online. I would really like to get it working again, both for ease and convenience for simple projects.
If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice. In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
I don't believe it matters in this situation, but just in case:
Windows 7
AMD Phenom II X4 820 - 2.80 GHz
6 GB RAM
Radeon HD 5880 1GB
Connecting through a Netgear WNDR3400 router, standard DSL connection.Sorry, not seeing where to edit my original post.
Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser. So I am not being blocked somehow to those particular sites. It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
Additionally, the only virus software running is Microsoft Security Essentials. It has never raised a flag before with this software or caused interference in the past. I do not use Norton or any other service which are known to interfere with programs often.
Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine. As you can see in this image though, it cannot seem to ever connect and grab my user information.
http://i.imgur.com/S53xN.png -
Error occurred during exporting ssrs report as pdf
an error occurred during local report processing. Object reference not set to an instance of an object
Thanks in advanceHi Esha2nk,
According to your description, when you export the report to PDF in BIDS, the error “Export error: An error occurred during local report processing. Object reference not set to an instance of an object.” is thrown out.
Based on the error message, it could cause by that there are hidden groups within the report, or the matrix has multiple columns and rows, and Hidden is set to true in the Visibility properties. So in your scenario, please check those two factors. If
issue persists, please provide report design for our analysis. Besides, would you please tell us which SQL Server version you are using?
Reference:
"An error occurred during
local reporting processing. Object reference not set to an instance of an object."
Object reference not set to an instance of an object
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Hi All
We are creating POs from interface program "Import Standard Purchase Order Program". Only for few of the POs, we are encountering the error 'Warning: An error occurred during tax calculation
. Please correct the problem or contact your system administrator.'
This error is happening for few PO's, other POs with same vendor, ship to and bill to location created successfully by the program
Any inputs on how to resolve this error is greatly appreciated.
Regards,
BrajeshHi Hussein,
Thank for the prompt response.
We have already applied the patch related to doc 1272684.1.
Below are the environment detail.
Database: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Application : 12.1.3
Diagnostic tool output :-
INTERFACE_
TRANSACTION_ID
INTERFACE_TYPE
COLUMN_NAME
PROCESSING_DATE
TABLE_NAME
ERROR_MESSAGE_NAME
ERROR_MESSAGE
100148
PO_DOCS_OPEN_INTERFACE
09-Aug-2013
PO_HEADERS_INTERFACE
PO_PDOI_TAX_CALCULATION_ERR
Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.
Log file :-
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POXPOPDOI module: Import Standard Purchase Orders
+---------------------------------------------------------------------------+
Current system time is 09-AUG-2013 21:09:04
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
STANDARD
N
INCOMPLETE
12805
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 12076063
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
69
+------------- 1) PRINT -------------+
Printing output file.
Request ID : 55116524
Number of copies : 0
Printer : noprint
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed successfully
Current system time is 09-AUG-2013 22:27:42
+---------------------------------------------------------------------------+
Brajesh -
How do i sign in onto facetime if it keeps on sayin 'an error occured during activation'.?
iOS: Troubleshooting FaceTime
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Using FaceTime
FaceTime, Game Center, Messages: Troubleshooting sign in issues
Maybe you are looking for
-
After upgrading the AIR SDK to 3.0 in Flash Professional CS5.5 I've found some problems. First, the JSON class in the as3corelib.swc library now throws a couple of compile errors: 1061: Call to a possibly undefined method decode through a reference w
-
Oracle 10g express edition primary key problem
Hi , i have a database with varchar as primary key eg.SEG. however after i insert row and set priamry key as SEG , the primary key will be displayed as number eg.1 and not SEG. Why is it so?
-
Install a boot SSD drive into new MacBook
I'm purchasing a new MBP, without retina display. Unfortunately, the high cost of the larger size SSD's priced me out of it. That being said, my new MBP will be shipping with the 1tb HDD. Is there room inside the laptop for me to install a small (64g
-
Hi guys.how can i run external files.Like cls.exe. thanx in advance
-
If possible please do not send update page to me no longer. Because when ever I accept it too many unwanted tails come with updates of yor site. Lütfen update istekleri bana ulaşmasın, tabii ki teknik yöndenmümkünse! Daha önce sırf bu yüzden tarayıcı