Error occured when running the "Receiving Transaction Processor"

Dear all :
We just found the scheduled concurrent program "Receiving Transaction Processor" all failed from last day,
and this program is always trying to re-run till it could finished successful.
the request log like following :
采购管理系统: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: 接收事务处理处理器
当前的系统时间为 25-02-2013 17:10:28
并发程序 RVCTP 返回错误
原因:RVCTP 遇到内部错误。参数:RVCTP,BATCH,,,
措施:请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以寻求帮助。
RVTBM-007:子例行程序 rvtbm_batch_mngr() 返回的错误
原因:子例行程序 rvtbm_batch_mngr() 返回时出现内部错误。
措施:请记录此错误编号以及您尝试进行的活动。 请与系统管理员联系以
RVTBM-080:子例行程序 rvtptcontrol() 返回的错误
原因:子例行程序 rvtptcontrol() 返回时出现内部错误。
措施:请记录此错误编号以及您尝试进行的活动。 请与系统管理员联系以寻求帮
RVTLO-050:ORA-01403: 未找到任何数据
原因:在 RVTLO 中出现 SQL 错误。SQL 错误为 &LSQL_ERR。
措施:请记录此错误编号以及您尝试进行的活动。请与系统管理
在试图启动立即并发程序 RVCTP 时,并发管理器出现错误。例行程序 &ROUTINE 接收到返回代码失败的信息。
请与您的支持代表联系。
当前的系统时间为 25-02-2013 17:10:29
成功地重新提交具有请求编号 21500965 的并发程序 RVCTP,以在 25-02-2013 17:05:30 启动。 (ROUTINE=AFPSRS)
正在执行请求完成选项...
Output file size:
0
未打印输出文件,因为:
已禁用此报表的打印选项。
已完成执行请求完成选项。
thanks and regards
Filex Liu

Dear all:
thanks for your attention, this problem has been resolved.
It's just because the error data in some lines about ship.
Some ship that has been canceled keep its status colum to be "running" and this cause the "Receiving Transaction Processor" to be error.
after change the status from running to error for the ships that has been cancel, it will recover.
thanks and regards
Filex Liu

Similar Messages

  • Please help on if anyone run the receiving transaction processor in online/immediate mode

    Hi All,
    Can anybody pl let me know how to run the receiving trx processor in online/immediate mode??
    Regards
    Harry !!

    Hi Harry,
    System Profile "RCV: Processing Mode" decides the processing mode for receiving transactions, it can be either in "Batch", "Immediate" or "On-line" modes. It is reflected in RCV_TRANSACTIONS_INTERFACE.PROCESSING_MODE_CODE field.
    Please refer:
    https://forums.oracle.com/thread/2513499
    Also have a look at:
    Forum Search: Receiving Transaction Processor
    Best Regards,

  • Issue with the Receiving Transaction Processor Standard Program

    We are facing issue in the Receiving Transaction Processor Standard Program.
    The error description is as below:
    RVTII-030: Subroutine rvtiicreate() returned error
    Cause: Subroutine rvtiicreate() returned an internal error.
    Action: Note this error number and the actions you are trying to perform. Contact your system administrator.
    RVTII-077: ORA-01476: divisor is equal to zero
    Cause: A SQL error has occurred in RVTII. The SQL error is &LSQL_ERR.
    if any once faced this issue earlier and any solution, Please let us know.
    Regards,
    Krishna

    Please see if these docs help.
    RMA Receipt Errors With RVTII:077 OE COGS API Returned Error Warehouse NULL [ID 301767.1]
    RCVRCERC: RVTII-077: ORA-0146: divisor is equal to zero [ID 1287907.1]
    Cost Of Goods Sold Account Generation Failed With Error [ID 406035.1]
    RMA Transaction Issues (Troubleshooting) [ID 311208.1]
    Thanks,
    Hussein

  • No Data Shown because an error occurred while running the query

    Discoverer 10gR2 using Plus on Firefox:
    I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
    The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
    All parameters except the extra "Model" are shared between the sheets.
    When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
    When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
    If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
    Booooo.
    Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
    Has any body run into this behavior? Is there an answer?
    -- Ron Olcott, Business Intelligence Product Manager

    What about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
    John DIckey

  • Error Message " An error occured while running the detection " Sharepoint 2010 & Project Server 2010

    i am trying to Update the Service Pack of sharepoint & Project
    Server (SP2) . i got an error while running the Package " An error occured while running the detection " ... I searched a bit and ran ROISCAN.vbs script which is by provided by MS to identify any issues ... i Found that few MSI files of sharepoint
    are missing from WINDOWS Installer folder.... My Question is Should i repair the Sharepoint or any tool that i can use to get the MSI ?

    There is a MS internal tool for fixing this issue but for this may be you need to contact MS, refer to below links:
    Utility Name: OPUtil.vbs
    http://social.technet.microsoft.com/Forums/en-US/a7919b10-e4fe-4911-9016-bb6b81cf4194/sharepoint-patch-update-issue
    http://blogs.technet.com/b/paulpaa/archive/2010/03/26/sharepoint-2007-hotfix-failed-with-an-error-the-detection-failed-this-can-be-due-to-a-corrupted-installation.aspx
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • A critical program error occured when running a workbook

    Some end users get a critical program error occured when running a workbook when they want to make selections.
    In the trace they get the following message
    System.ArgumentException: Item has already been added.  Key in dictionary: "44ABATDK7TYM365CYLQ0VDKU6"  Key being added: "44ABATDK7TYM365CYLQ0VDKU6"
    This happens only on some PC clients !
    Thanks for any help !
    Ivan

    Hi Vid,
    Thanks for your suggestion.
    I am using a different patch i.e.
    BI AddOn 7.X (based on 7.10), Support Package 5, Revision 1083
    and it helps to solve my problem.
    Cheers.

  • Errors occured when compile the bpel process

    Errors occurred when compile the bpel process using bpel designer for Eclipse:
    (com.oracle.bpel.designer_0.9.13)
    using PM: bpel_jboss_101200
    More error infomation following:
    Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
    main:
    [bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
    [bpelc] retun true;
    [bpelc] ^
    [bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
    [bpelc] retun true;
    [bpelc] ^
    [bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.collaxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.collaxa.cube.engine.types.bpel.CXPartnerLink.
    [bpelc] __pl.setPartneLinkBinding(getProcessDescriptor().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
    [bpelc] ^
    [bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
    [bpelc] __setOutgoingLinks(__sc, __ctx);
    [bpelc] ^
    [bpelc] 4 errors
    BUILD FAILED
    E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml:28: ORABPEL-01005
    Error in java files auto-generated when compiling ,why?
    Thanks!

    when compiled again without any change, the same errors like above are not occurs
    more info.
    Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
    main:
    BUILD SUCCESSFUL
    Total time: 9 seconds
    BUT, some errors occurs in BPEL PM server and in Console the process is not available
    more Info: Because I using Chinese version,some chinese Info occurs in the error infomation ,so i have translated some character into English.
    process "AboutTest" (version "1.0") compiled sucessfully
    15:49:15,718 INFO [STDOUT] <2007-05-11 15:49:15,718> <INFO> <default.collaxa.cu
    be.engine.deployment> process "AboutTest" (version "1.0") loaded sucessfully.
    16:25:25,265 INFO [STDOUT] <2007-05-11 16:25:25,250> <INFO> <default.collaxa.cu
    be.compiler> validating "E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0.jar\
    AboutTest.bpel" ...
    16:25:35,015 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
    .jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
    16:25:35,015 INFO [STDOUT] retun true;
    16:25:35,015 INFO [STDOUT] ^
    16:25:35,031 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
    .jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
    16:25:35,031 INFO [STDOUT] retun true;
    16:25:35,031 INFO [STDOUT] ^
    16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
    .jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.col
    laxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.colla
    xa.cube.engine.types.bpel.CXPartnerLink.
    16:25:35,859 INFO [STDOUT] __pl.setPartneLinkBinding(getProcessDescript
    or().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
    16:25:35,859 INFO [STDOUT] ^
    16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
    .jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
    16:25:35,859 INFO [STDOUT] __setOutgoingLinks(__sc, __ctx);
    16:25:35,859 INFO [STDOUT] ^
    16:25:35,859 INFO [STDOUT] 4 errors
    16:25:36,343 INFO [STDOUT] <2007-05-11 16:25:36,312> <ERROR> <default.collaxa.c
    ube.engine.deployment> <CubeProcessFactory::generateProcessClass>
    process "AboutTest" (version "1.0") compiled failed.
    16:25:36,359 INFO [STDOUT] <2007-05-11 16:25:36,359> <ERROR> <default.collaxa.c
    ube.engine.deployment> <CubeProcessLoader::create> can not compile the class .
    can not compile the bpel class generated from "AboutTest".
    16:25:36,375 INFO [STDOUT] <2007-05-11 16:25:36,375> <ERROR> <default.collaxa.c
    ube.engine.deployment> process "AboutTest" (version "1.0") loaded failed!!
    16:25:37,281 INFO [STDOUT] <2007-05-11 16:25:37,265> <ERROR> <default.collaxa.c
    ube> <BaseCubeSessionBean::logError>
    if you have installed patched in server, please check whether the proriety "bpelcClasspath" contained the patch class.
    16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
    sHolder.bind(CubeProcessHolder.java:1257)
    16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
    sHolder.loadAndBind(CubeProcessHolder.java:870)
    16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
    sHolder.loadArchive(CubeProcessHolder.java:812)
    16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.CubeEngine.loadProces
    sArchive(CubeEngine.java:985)
    16:25:37,421 INFO [STDOUT] at com.collaxa.cube.ejb.impl.BPELDomainManagerBe
    an.loadProcessArchive(BPELDomainManagerBean.java:390)
    16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke0(
    Native Method)
    16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke(N
    ativeMethodAccessorImpl.java:39)
    16:25:37,421 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
    ke(DelegatingMethodAccessorImpl.java:25)
    16:25:37,421 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
    24)
    16:25:37,421 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer$Conta
    inerInterceptor.invoke(StatelessSessionContainer.java:683)
    16:25:37,421 INFO [STDOUT] at org.jboss.resource.connectionmanager.CachedCo
    nnectionInterceptor.invoke(CachedConnectionInterceptor.java:186)
    16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.StatelessSessionInstanc
    eInterceptor.invoke(StatelessSessionInstanceInterceptor.java:72)
    16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.AbstractTxInterceptor.i
    nvokeNext(AbstractTxInterceptor.java:84)
    16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.runWit
    hTransactions(TxInterceptorCMT.java:282)
    16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.invoke
    (TxInterceptorCMT.java:148)
    16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.SecurityInterceptor.inv
    oke(SecurityInterceptor.java:111)
    16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.LogInterceptor.invoke(L
    ogInterceptor.java:191)
    16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.ProxyFactoryFinderInter
    ceptor.invoke(ProxyFactoryFinderInterceptor.java:122)
    16:25:37,437 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer.inter
    nalInvoke(StatelessSessionContainer.java:331)
    16:25:37,437 INFO [STDOUT] at org.jboss.ejb.Container.invoke(Container.java
    :709)
    16:25:37,437 INFO [STDOUT] at sun.reflect.GeneratedMethodAccessor81.invoke(
    Unknown Source)
    16:25:37,437 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
    ke(DelegatingMethodAccessorImpl.java:25)
    16:25:37,437 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
    24)
    16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.ReflectedDispatcher.dispa
    tch(ReflectedDispatcher.java:60)
    16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
    ation.java:62)
    16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
    ation.java:54)
    16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.invoke(Invocat
    ion.java:82)
    16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.AbstractMBeanInvoker.invo
    ke(AbstractMBeanInvoker.java:197)
    16:25:37,453 INFO [STDOUT] at org.jboss.mx.server.MBeanServerImpl.invoke(MB
    eanServerImpl.java:473)
    16:25:37,453 INFO [STDOUT] at org.jboss.invocation.local.LocalInvoker.invok
    e(LocalInvoker.java:97)
    16:25:37,453 INFO [STDOUT] at org.jboss.invocation.InvokerInterceptor.invok
    e(InvokerInterceptor.java:90)
    16:25:37,453 INFO [STDOUT] at org.jboss.proxy.TransactionInterceptor.invoke
    (TransactionInterceptor.java:46)
    16:25:37,453 INFO [STDOUT] at org.jboss.proxy.SecurityInterceptor.invoke(Se
    curityInterceptor.java:55)
    16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ejb.StatelessSessionIntercept
    or.invoke(StatelessSessionInterceptor.java:100)
    16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ClientContainer.invoke(Client
    Container.java:85)
    16:25:37,453 INFO [STDOUT] at $Proxy146.loadProcessArchive(Unknown Source)
    16:25:37,453 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
    sMonitorWork.run(CubeProcessMonitorWork.java:129)
    16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.jca.work.WorkerJob.go(W
    orkerJob.java:51)
    16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.common.ThreadPool.run(T
    hreadPool.java:267)
    16:25:37,453 INFO [STDOUT] at java.lang.Thread.run(Thread.java:534)
    16:25:37,453 INFO [STDOUT] <2007-05-11 16:25:37,453> <ERROR> <default.collaxa.c
    ube.engine.deployment> <CubeProcessMonitorWork::run> Error while loading process
    archive E:\OraBPELPM\domains\default\deploy\bpel_AboutTest_1.0.jar
    why?
    thanks

  • When installing a NI 5112, I get an error message when running the test panel.

    I have recently decided to reinstall my PCI 5112 high speed digitizer in a different computer, for practical reasons. After having installed the software, hardware and successfully passing the self test, an error (10800) occurs when running the test panels. The signal applied to the channel and the different parameters used, worked fine with the previous computer but not with this one. Any idea why?
    Thanks,
    Thomas

    Hello Thomas,
       The error code you are getting is related to the board not recording enough samples in the given time interval.  May I ask which series of PCI card you are using. This can be found by looking at the device in Measurement and Automation Explorer and looking under devices and interfaces. The series letter is the one on the end of the number after the hyphen. E.g. PCI-MIO-16E-4 would be an E-series board.
    Also which versions of Measurement and Automation Explorerand NI-Scope are you running? Are these the same versions as you used in the old PC system? Sometimes an upgrade in the version is all that is required to fix such a problem but unfortunately it can sometimes cause a problem if you upgrade! It would depend on the versions you are currently running and the series of the board that you are using.
    LeeM
    AE,
     National Instruments
    Message Edited by LeeM on 10-31-2006 10:47 AM

  • Import error: An error occurred whilst running the import.

    ---------------------------
    Import error
    An error occurred whilst running the import. The import log file will now be opened. 
    Exception details: 
    Microsoft.SharePoint.SPException: The file WO_11_12_A_109/STAGE 1ST has been modified by (unknown) on 29 Sep 2014 16:45:44 +0530. ---> System.Runtime.InteropServices.COMException (0x81020037): <nativehr>0x81020015</nativehr><nativestack></nativestack>The
    file WO_11_12_A_109/STAGE 1ST has been modified by (unknown) on 29 Sep 2014 16:45:44 +0530.
       at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateFileOrFolderProperties(String bstrWebUrl, String bstrWebRelativeUrl, Object varProperties, Int32 fMigrationSemantics, Int32 fReGhost, Byte& piLevel)
       at Microsoft.SharePoint.Library.SPRequest.UpdateFileOrFolderProperties(String bstrWebUrl, String bstrWebRelativeUrl, Object varProperties, Int32 fMigrationSemantics, Int32 fReGhost, Byte& piLevel)
       --- End of inner exception stack trace ---
       at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
       at Microsoft.SharePoint.Library.SPRequest.UpdateFileOrFolderProperties(String bstrWebUrl, String bstrWebRelativeUrl, Object varProperties, Int32 fMigrationSemantics, Int32 fReGhost, Byte& piLevel)
       at Microsoft.SharePoint.SPFolder.UpdateOnImport()
       at Microsoft.SharePoint.Deployment.FolderSerializer.SetObjectData(Object obj, SerializationInfo info, StreamingContext context, ISurrogateSelector selector)
       at Microsoft.SharePoint.Deployment.XmlFormatter.CallSetObjectData(Object obj, SerializationInfo objectData, ISerializationSurrogate surrogate, ISurrogateSelector selector)
       at Microsoft.SharePoint.Deployment.XmlFormatter.ParseObject(Type objectType, Boolean isChildObject)
       at Microsoft.SharePoint.Deployment.XmlFormatter.DeserializeObject(Type objectType, Boolean isChildObject, DeploymentObject envelope)
       at Microsoft.SharePoint.Deployment.XmlFormatter.Deserialize(Stream serializationStream)
       at Microsoft.SharePoint.Deployment.ObjectSerializer.Deserialize(Stream serializationStream)
       at Microsoft.SharePoint.Deployment.SPImport.DeserializeObjects()
       at Microsoft.SharePoint.Deployment.SPImport.Run()
       at COB.SharePoint.Utilities.DeploymentWizard.Core.WizardDeployment.RunImport()
    OK   

    Actual error is given below. 
    Is there any way to import it without any error?
    Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=65.57336
    10/06/2014 14:37:33.20 SPContentDeploymentWizard.exe (0x1544)  
    0x117C SharePoint Foundation        
    Monitoring                    
    b4ly High    
    Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=45.483792
    10/06/2014 14:37:33.21 SPContentDeploymentWizard.exe (0x1544)  
    0x1378 SharePoint Foundation        
    Monitoring                    
    b4ly High    
    Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=27.316736
    10/06/2014 14:37:33.21 SPContentDeploymentWizard.exe (0x1544)  
    0x1600 SharePoint Foundation        
    Monitoring                    
    b4ly Medium  
    Leaving Monitored Scope (import). Execution Time=30.521776
    10/06/2014 14:37:33.21 SPContentDeploymentWizard.exe (0x1544)  
    0x1600 SharePoint Foundation        
    Monitoring                    
    nasq Medium  
    Entering monitored scope (import)
    10/06/2014 14:37:33.24 SPContentDeploymentWizard.exe (0x1544)  
    0x1378 SharePoint Foundation        
    Monitoring                    
    b4ly High    
    Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=27.246848
    10/06/2014 14:37:33.27 SPContentDeploymentWizard.exe (0x1544)  
    0x1600 SharePoint Foundation        
    Monitoring                    
    b4ly Medium  
    Leaving Monitored Scope (import). Execution Time=52.29824
    10/06/2014 14:37:33.27 SPContentDeploymentWizard.exe (0x1544)  
    0x1600 SharePoint Foundation        
    Monitoring                    
    nasq Medium  
    Entering monitored scope (import)
    10/06/2014 14:37:33.27 SPContentDeploymentWizard.exe (0x1544)  
    0x117C SharePoint Foundation        
    General                      
    8kh7 High    
    <nativehr>0x81020015</nativehr><nativestack></nativestack>The file WO/STAGE 1ST/Amd has been modified by (unknown) on 06 Oct 2014 14:37:33 +0530.

  • Following error occurring when running application in wireless tool kit

    Hi
    Following error occurring when running application in wireless tool kit
    java/lang/ClassFormatError: Bad version information.
    can any suggest y ?

    Hi,
    I am also facing the same problem......................
    java/lang/ClassFormatError: Bad version information
    The error occurs when I try to simulate the mobile device using wireless tool kit. Does it have anything to do with the antivirus/firewall running on my system?
    Did Ram get a solution to his problem? Can anybody please help?
    Many Thanks
    Merin
    HI
    Sorry i could not find any related information there
    the version of wireless toolkit i am using is 2.1
    well in release notes its given that it also
    supports cldc1.0 and midp1.0
    presently i am using cldc1.0.4 and midp1.0.3
    versions
    is there any version compatability error
    please suggest me its quite urgent

  • An error occurred while running the Inventory agent in InventoryEnforcer

    2007.03.07 15:00:00 [Console:SERVMAN SCHEDULED ITEM] Inventory Agent:
    Found KeyValuePair in INVSETUP.INI, agentRuns = Subscriber
    2007.03.07 15:00:00 [Console:SERVMAN SCHEDULED ITEM] Inventory Agent:
    Found KeyValuePair in INVSETUP.INI, forceDebug = false
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] Clean the
    Inventory Agent
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM]
    Inventory(InvAgent):Mar 7, 2007 3:01:12 PM: An error occurred while
    running the Inventory agent in
    InventoryEnforcer:EnforcePolicy(Distributed Server Package
    ServerX:General:Server Inventor.Pol.ZEN.BO.ORG)
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] MESSAGE - Policy
    processed successfully : Distributed Server Package
    ServerX:General:Server Inventor.Pol.ZEN.BO.ORG
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] Policy has been
    flagged to prevent future scheduling : Distributed Server Package
    ServerX:General:Server Inventor.Pol.ZEN.BO.ORG
    I have reinstalled de ZfS 7SP1 Inventory Agent on the server.
    Did not help.
    Recreated the Distributed Server Package with only Server Inventory
    Policy enabled. And succesfully distributed it to the subscriber.
    Did not help.
    Restarted server, did not help ;-)
    Checked if INVNATVE.NLM, INVAID.NLM and MPKSCAN.NLM are installed. OK
    Inventory Policy is referred to sane Inventory Service object as
    workstation inventory policy
    Inventory Service on root service has Machines Attached option
    enabled.
    Workstation inventory works fine from all our 36 locations.
    Server inventory i am testing from one location.
    We have Netware 6.5 SP5 with ZfD and ZfS 7 SP1 on all our locations.
    Greetings from the Netherlands,
    Michel Woltjer

    Michel,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • An error occurred when processing the spool request.  (Possibly due to memory problems)

    Hi SAP,
    My backgroud job is failing with log as shown below
    Job started
    Step 001 started (program ZMRS0065, variant SUS
    Step 002 started (program ZDRS0090, variant SUS
    Step 003 started (program ZFRS0305, variant SUS
    Step 004 started (program ZFRS0300, variant SUS
    Access error
    Job cancelled after system exception ERROR_MESSAGE
    An error occurred when processing the spool request.  (Possibly due to memory problems)
    Kindly help out in this issue
    Regards
    Mohammed

    Hello Mohammed,
    Have you seen any error in your SM21 system log and developer trace of spool work process
    during that time?
    The maximum size when create spool is 2GB.Pls also check if you are creating a spool
    larger than it.
    Best Regards
    Jie Bai

  • Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

    error message when running the FSPCCURR - PS/Fin MultiCurrency Process
    =====================================================
    2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
    2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
    2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
    2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

    Hi 841037,
    We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

  • Failed to execute with the error Error occurred when starting the parser: t

    Dear All
    I am getting this error
    ""A database error occurred. The database error text is: The MDX query SELECT  { [DASKA1EDEL2DMLXTQ62S595QV].[DB7BP4A8AMQTUD3DPEEPS4J87] }  ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH].[LEVEL01].MEMBERS, [DASKFZ1TRFOLNTG78G0HH2B87].MEMBERS ), [0MATERIAL].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ), [0COMP_CODE].[LEVEL01].MEMBERS ), [0ACTDELDATE].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_NAME, MEMBER_CAPTION ON ROWS FROM [0IC_C03/ZMATSTOCK]  failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)""
    I already went to similar kind of error solution in forum,but this error is coming for one web I query,all other reports are working fine.
    I already implemented note 1032461

    Hi,
    Under normal circumstances it should be enough to restart the connection service.
    As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
    Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
    All the Best,
    Madhu....

  • An error occurred when loading the Cube ; Analysis services 2012

    Hi All
    We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2.
    All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are not sure what could be reason for such in consistency. Below are the logs
    Failed to load server plug-in extension defined in assembly System. The following error(s) have been raised during the plug-in initialization. Loading of the System assembly failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException;Could
    not load file or assembly 'msmdspdm, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)
    Strong name validation failed. (Exception from HRESULT: 0x8013141A). Enumeration of types or functions through reflection in managed code failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException.
    OLE DB or ODBC error: Query timeout expired; HYT00.
    LOGS :
    (12/6/2013 7:45:12 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
    (12/6/2013 7:46:37 AM) Message: An error occurred when loading the Claim Industry Summary Metrics Current. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
    (12/6/2013 7:46:37 AM) Message: An error occurred when loading the AW Cube. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
    (12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
    (12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
    (12/6/2013 7:46:42 AM) Message: An error occurred when loading the AW Cube. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
    (12/6/2013 7:46:44 AM) Message: An error occurred when loading the AW Cube. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
    (12/6/2013 7:46:45 AM) Message: An error occurred when loading the AW Cube. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
    (12/6/2013 7:46:55 AM) Message: Service stopped. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
    (12/6/2013 7:47:04 AM) Message: The Query thread pool now has 1 minimum threads, 40 maximum threads, and a concurrency of 20.  Its thread pool affinity mask is 0x00000000000fffff. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
    (12/6/2013 7:47:04 AM) Message: The ParsingShort thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20.  Its thread pool affinity mask is 0x00000000000fffff. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
    (12/6/2013 7:47:04 AM) Message: The ParsingLong thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20.  Its thread pool affinity mask is 0x00000000000fffff. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
    (12/6/2013 7:47:04 AM) Message: The Processing thread pool now has 1 minimum threads, 64 maximum threads, and a concurrency of 20.  Its thread pool affinity mask is 0x00000000000fffff. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
    (12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x000000000000001f now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
    (12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000003e0 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
    (12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x0000000000007c00 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
    (12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000f8000 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
    (12/6/2013 7:47:11 AM) Message: The flight recorder was started. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210005)
    (12/6/2013 7:47:11 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
    \\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
    Thanks
    Saurabh Sinha
    http://saurabhsinhainblogs.blogspot.in/

    Hi Saurabh,
    Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
    For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
    Regards,
    Elvis Long
    TechNet Community Support

Maybe you are looking for

  • Not Appearing in Itunes

    Please help me... I recently reset my ipod to it's original settings and now it no longer respond in itunes. It comes up with the message "Itunes cannot read the contents of the ipod. Use the Ipod Software Updater application to restore the ipod to f

  • ACR 4.5 worth the download?

    First understand that I am new to digital photography so be gentle. Bought CS3 in January it came with ACR 4.3.1. I like it although I wish it was faster. Just wanted to know if 4.5 is significantly better (noise, sharpness, additional features, etc.

  • FMS on linux

    hello, i recently installed FMS on my centos, but actually i am having difficult to start the server. #Fields: date   time    x-pid   x-status        x-ctx   x-comment 2012-04-18      18:58:25        2513    (i)2581173      FMS detected IPv6 protocol

  • Need to fixed solution for multipale path for single request email notification

    Hello All, I observed the some time GRC request have multiple path (Example 2.1 and 6.1). but in my landscape if one of the path completed email will sent to user and requester. but that should not correct. Once request completed (Path1 , Path2 ..etc

  • Cuda toolkit and sdk with ati card

    I have an ati 4330 on my laptop which I use to develop  CUDA programs using the emulation mode under Ubuntu 9.10. I have both the toolkit and the sdk installed, but NOT the nvidia driver. I always used arch linux, but I couldn't install the toolkit a