Error occuring when creating new folder.

I am new to Robohelp and have been teaching myself the program to fix and upgrade my companies on line help system.  I believe the last time the help system was updated was 2009 and it was in Robohelp 8.   I have upgraded the program into Robohelp 11 and am starting to edit the project.   I am coming up against a few issues and have questions. 
1.  How do you move the entire project file off the network location and make a local version.  My network is slow and seems to be causing errors.
2.  I just tried to create a new folder in the main project folders for a new folder topic and recieved this error.
I apologize if these are silly questions.  I am no developer but I am trying to help my company upgrade our on line help!
Thanks!

Hi there
To move the project, from RoboHelp, look at your Project Manager pod. Right-click a topic and choose Explore. That will open Windows Explorer at your project location. Then close the project in RoboHelp.
Now from that Windows Explorer window, click and drag the folder where the project is to your C drive. Personally, I always advise to create a folder named "Projects". ( C:\Projects ) then create folders inside that folder for each project.
Now re-open the project in RoboHelp and you should be working on the local drive and all should operate much more efficiently.
Likely the error resulted from working on the network. Network is never really advisable in my own opinion.
If you want some training, I'd be happy to work with you on a contract basis.
Cheers... Rick

Similar Messages

  • HT3275 I continue to get the following error message: Unable to complete back up.an error occurred while creating backup folder. It's a brand new drive. When I attempt to repair it using disk utility I get:unable to repair disk cannot unmounted

    I have been trying to use time machine on a new lacie 2tb usb 2 drive for back up. I continue to get: "unable to complete backup.An error occured while creating backup folder". When I use disk utility to repair I get another error message: unable to repair disk unmountable.
    Help me Obie One Canobie you are my last hope

    I have confused myself with the facts!  Started out keeping track of every step and every variable but have sort of lost it as we progress here.  First I quit all applications then swapped connections between mouse port and backup disk port to influence possible bad connections question.  Changed power outlet receptacle for the backup disk. Disabled the put-the-HD-to-sleep option.  Then powered down the computerator.
    Next started up computerator.  Turned Time Machine ON  and experienced multiple successful backups!  Then I started up a few applications, Mail and Text Edit (but not Safari so far).  Had a few more successes.  After each backup, I used Disk Utility to verify the backup disk is still OK.  This because the error about unable to unmount the backup disk seems to go hand in hand with Disk Utility finding the backup disk to be bad.
    Put computer to sleep for the night.  Upon starting up in the morning, and before doing anything else, I did a backup disk verification... BAD!   Did a restart and verified the backup disk... OK.
    Did a few    Sleep-bad, Restart -OK    repetitions.
    It seems consistent:  Sleeping the computer apparently messes up the backup disk but doing a Restart "repairs" it.
    =============================
    Now then, I don't understand everything I know here.  Methinks that maybe keeping the HD from sleeping during lulls in activity has allowed successful backups through the day but manually putting everything to sleep for the night causes a return to the problem of spinning-back-up-too-slowly (which was explained earlier).  Is there any truth in this?
    I may abandon this Seagate thing for something more compatible.  What's out there that we know works reliably for us?

  • Error occurs when creating a new destination in HCI OData Provision Administration

    Hi,
    An error occurs when creating a new destination in HCI OData Provision Administration.
    Please see the screen shot in attachment.
    Any help will be appreciated!
    Thanks,
    Li-hua

    It's the same issue as in MissingResourceException when trying to create a destination. Changing the destination name should do the trick.
    (still looking for the GWaaS colleagues to fix the original issue.)

  • Error in executing ABAP program. Error occurred when creating dataset

    hi,
    when I use LKM SAP ERP to Oracle (SQLLDR) to extract data from SAP ERP server. I execute my interface, and it's stop at extract data step.
    This is message:
    java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset/abc/ZODI_13001_6001_GLOBAL.txt
    I tried others path name, tried slash or backslash. This is content in code tab
    OdiSAPAbapExecute "-UPLOAD=1" "-EXECUTE=1" "-EXECUTEBASE_RKM=0" "-ZRFC_RUN_INSTALL=1" "-ABAP_PROGRAM_NAME=ZODI_13001_6001" "-HOST=10.86.87.24" "-USER=sv_hoa" "-PASSWORD=<@=snpRef.getInfo("SRC_PASS") @>" "-SAP_CLIENT=800" "-SAP_LANGUAGE=EN" "-SAP_SYSTEM_NUMBER=02" "-SAP_FUNCTION_GROUP_NAME=ZODI_FGR_13001" "-CONNECTION_POOL_NAME=SAP_ODI_ERP_POOL_10.86.87.24" "-CONNECTION_POOL_SIZE=10" "-FILE_DELIMITER=<@=""+(char)8@>" "-FILE_NAME=ZODI_13001_6001_GLOBAL.txt" "-FTP_HOST=10.86.82.108" "-FTP_USER=anh" "-FTP_PASSWORD=<@=sFtpPassword@>" "-FTP_PASSIVE_MODE=1" "-FTP_TRANSFER_TIMEOUT=100000" "-ODI_VARIABLE_NAMES=" "-ODI_VARIABLE_VALUES=" "-USER_ABAP_PARAMETER_NAMES=IV_DELIMITER,CHAR3;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_MAX_ROW_CNT,SYTABIX;IV_FETCH_BATCH_SIZE,SYTABIX;" "-USER_ABAP_PARAMETER_VALUES=<Value>" "-USER_ABAP_PARAMETER_SEPARATOR=<Value>" "-ABAP_TABLE_PARAMETERS=RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2" "-ABAP_EXPORT_PARAMETERS=ERRORMESSAGE;SY-MSGV1" "-LOG_FILE_NAME=C:\Users\anh\AppData\Local\Temp\SapAbapExecuteOpenTool_13001.log" "-FTP_PATH=/abc/" "-DEV_CLASS=ZODI_DEVCLASS" "-MAX_ROW_COUNT=" "-FETCH_BATCH_SIZE=100000" "-HASH_VALUE_MARKER=HVM" "-ABAP_PROGRAM_BODY=
    *Final Type declarations
    TYPES : BEGIN OF ty_final,
    Y03HOCSINH_HOCSINH_ID TYPE
    Y03HOCSINH-HOCSINH_ID,
    Y03HOCSINH_MA_HOC_SINH TYPE
    Y03HOCSINH-MA_HOC_SINH,
    Y03HOCSINH_TEN_HOC_SINH TYPE
    Y03HOCSINH-TEN_HOC_SINH,
    Y03HOCSINH_GIOI_TINH TYPE
    Y03HOCSINH-GIOI_TINH,
    Y03HOCSINH_DIA_CHI TYPE
    Y03HOCSINH-DIA_CHI,
    Y03HOCSINH_GHI_CHU TYPE
    Y03HOCSINH-GHI_CHU,
    END OF ty_final.
    *Final Temp Type Declarations
    TYPES : BEGIN OF ty_final_tmp,
    Y03HOCSINH_HOCSINH_ID TYPE
    Y03HOCSINH-HOCSINH_ID ,
    Y03HOCSINH_MA_HOC_SINH TYPE
    Y03HOCSINH-MA_HOC_SINH ,
    Y03HOCSINH_TEN_HOC_SINH TYPE
    Y03HOCSINH-TEN_HOC_SINH ,
    Y03HOCSINH_GIOI_TINH TYPE
    Y03HOCSINH-GIOI_TINH ,
    Y03HOCSINH_DIA_CHI TYPE
    Y03HOCSINH-DIA_CHI ,
    Y03HOCSINH_GHI_CHU TYPE
    Y03HOCSINH-GHI_CHU ,
    END OF ty_final_tmp.
    *Final Target Type Declarations
    TYPES : BEGIN OF ty_final_target,
    C0_Y03HOCSINH_HOCSINH_ID TYPE
    Y03HOCSINH-HOCSINH_ID,
    C1_Y03HOCSINH_MA_HOC_SINH TYPE
    Y03HOCSINH-MA_HOC_SINH,
    C2_Y03HOCSINH_TEN_HOC_SINH TYPE
    Y03HOCSINH-TEN_HOC_SINH,
    C3_Y03HOCSINH_GIOI_TINH TYPE
    Y03HOCSINH-GIOI_TINH,
    C4_Y03HOCSINH_DIA_CHI TYPE
    Y03HOCSINH-DIA_CHI,
    C5_Y03HOCSINH_GHI_CHU TYPE
    Y03HOCSINH-GHI_CHU,
    END OF ty_final_target.
    * Table type for Y03HOCSINH
    TYPES : BEGIN OF ty_Y03HOCSINH,
    HOCSINH_ID TYPE
    Y03HOCSINH-HOCSINH_ID,
    MA_HOC_SINH TYPE
    Y03HOCSINH-MA_HOC_SINH,
    TEN_HOC_SINH TYPE
    Y03HOCSINH-TEN_HOC_SINH,
    GIOI_TINH TYPE
    Y03HOCSINH-GIOI_TINH,
    DIA_CHI TYPE
    Y03HOCSINH-DIA_CHI,
    GHI_CHU TYPE
    Y03HOCSINH-GHI_CHU,
    END OF ty_Y03HOCSINH.
    TYPES: BEGIN OF gs_text,
    line(843) TYPE c,
    END OF gs_text.
    *Structure Declarations
    DATA: wa_final_string TYPE string,
    wa_final TYPE ty_final,
    wa_final_target TYPE ty_final_target,
    wa_Y03HOCSINH TYPE ty_Y03HOCSINH,
    *Table Declarations
    tt_final TYPE STANDARD TABLE OF ty_final,
    tt_Y03HOCSINH TYPE STANDARD TABLE OF ty_Y03HOCSINH,
    tt_final_target TYPE STANDARD TABLE
    OF ty_final_target,
    tt_final_tmp TYPE STANDARD TABLE OF ty_final_tmp,
    tt_final_tmp1 TYPE STANDARD TABLE OF ty_final,
    gt_result TYPE STANDARD TABLE OF gs_text,
    *Variable Declarations
    lv_path TYPE string,
    lv_flag TYPE char1,
    C0_Y03HOCSINH_HOCSINH_ID TYPE
    STRING,
    C1_Y03HOCSINH_MA_HOC_SINH TYPE
    STRING,
    C2_Y03HOCSINH_TEN_HOC_SINH TYPE
    STRING,
    C3_Y03HOCSINH_GIOI_TINH TYPE
    STRING,
    C4_Y03HOCSINH_DIA_CHI TYPE
    STRING,
    C5_Y03HOCSINH_GHI_CHU TYPE
    STRING,
    wa_final_tmp TYPE ty_final_tmp,
    lv_file TYPE string,
    lv_datum TYPE sy-datum,
    lv_date TYPE char10,
    wa_result TYPE string,
    lv_delimiter type string,
    lv_cnt TYPE sytabix,
    *-Cursor Declaration
    lv_Y03HOCSINH_dbcur TYPE cursor,
    lv_tabix_frm TYPE sy-tabix.
    lv_delimiter = iv_delimiter.
    IF iv_hashvalue = 'HVM'.
    *Open/delete output file
    CONCATENATE iv_path iv_filename INTO lv_path.
    *Check for file existence, if found, delete it
    OPEN DATASET lv_path FOR INPUT
    IN TEXT MODE
    ENCODING DEFAULT.
    IF sy-subrc EQ 0.
    DELETE DATASET lv_path.
    ENDIF.
    *Open/create output file
    OPEN DATASET lv_path FOR APPENDING
    IN TEXT MODE
    ENCODING DEFAULT.
    IF sy-subrc EQ 0.
    *Batch Processing
    OPEN CURSOR WITH HOLD lv_Y03HOCSINH_dbcur FOR
    SELECT HOCSINH_ID
    MA_HOC_SINH
    TEN_HOC_SINH
    GIOI_TINH
    DIA_CHI
    GHI_CHU
    FROM Y03HOCSINH.
    DO.
    *Check for the counter, only for first batch
    *process new line is required...
    lv_cnt = lv_cnt + 1.
    REFRESH tt_Y03HOCSINH.
    FETCH NEXT CURSOR lv_Y03HOCSINH_dbcur
    APPENDING TABLE tt_Y03HOCSINH
    PACKAGE SIZE IV_FETCH_BATCH_SIZE.
    IF NOT tt_Y03HOCSINH IS INITIAL.
    ELSE.
    EXIT.
    ENDIF.
    LOOP AT tt_Y03HOCSINH INTO wa_Y03HOCSINH.
    MOVE wa_Y03HOCSINH-HOCSINH_ID
    TO wa_final_tmp-Y03HOCSINH_HOCSINH_ID.
    MOVE wa_Y03HOCSINH-MA_HOC_SINH
    TO wa_final_tmp-Y03HOCSINH_MA_HOC_SINH.
    MOVE wa_Y03HOCSINH-TEN_HOC_SINH
    TO wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH.
    MOVE wa_Y03HOCSINH-GIOI_TINH
    TO wa_final_tmp-Y03HOCSINH_GIOI_TINH.
    MOVE wa_Y03HOCSINH-DIA_CHI
    TO wa_final_tmp-Y03HOCSINH_DIA_CHI.
    MOVE wa_Y03HOCSINH-GHI_CHU
    TO wa_final_tmp-Y03HOCSINH_GHI_CHU.
    APPEND wa_final_tmp TO tt_final_tmp.
    ENDLOOP.
    free : tt_Y03HOCSINH.
    LOOP AT tt_final_tmp INTO wa_final_tmp.
    MOVE wa_final_tmp-Y03HOCSINH_HOCSINH_ID
    TO wa_final_target-C0_Y03HOCSINH_HOCSINH_ID.
    MOVE wa_final_tmp-Y03HOCSINH_MA_HOC_SINH
    TO wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH.
    MOVE wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH
    TO wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH.
    MOVE wa_final_tmp-Y03HOCSINH_GIOI_TINH
    TO wa_final_target-C3_Y03HOCSINH_GIOI_TINH.
    MOVE wa_final_tmp-Y03HOCSINH_DIA_CHI
    TO wa_final_target-C4_Y03HOCSINH_DIA_CHI.
    MOVE wa_final_tmp-Y03HOCSINH_GHI_CHU
    TO wa_final_target-C5_Y03HOCSINH_GHI_CHU.
    Append wa_final_target to tt_final_target.
    ENDLOOP.
    free : tt_final_tmp.
    Clear wa_final_target.
    IF NOT iv_max_row_cnt IS INITIAL.
    Loop at tt_final_target into
    wa_final_target TO iv_max_row_cnt.
    MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
    TO C0_Y03HOCSINH_HOCSINH_ID.
    MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
    TO C1_Y03HOCSINH_MA_HOC_SINH.
    MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
    TO C2_Y03HOCSINH_TEN_HOC_SINH.
    MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
    TO C3_Y03HOCSINH_GIOI_TINH.
    MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
    TO C4_Y03HOCSINH_DIA_CHI.
    MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
    TO C5_Y03HOCSINH_GHI_CHU.
    CONCATENATE
    C0_Y03HOCSINH_HOCSINH_ID
    C1_Y03HOCSINH_MA_HOC_SINH
    C2_Y03HOCSINH_TEN_HOC_SINH
    C3_Y03HOCSINH_GIOI_TINH
    C4_Y03HOCSINH_DIA_CHI
    C5_Y03HOCSINH_GHI_CHU
    INTO wa_final_string
    SEPARATED BY lv_delimiter.
    IF sy-tabix EQ 1 AND lv_cnt EQ 1.
    CONCATENATE wa_final_string
    lv_delimiter INTO wa_final_string.
    ELSE.
    CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
    lv_delimiter INTO wa_final_string.
    ENDIF.
    APPEND wa_final_string TO gt_result.
    CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
    C1_Y03HOCSINH_MA_HOC_SINH,
    C2_Y03HOCSINH_TEN_HOC_SINH,
    C3_Y03HOCSINH_GIOI_TINH,
    C4_Y03HOCSINH_DIA_CHI,
    C5_Y03HOCSINH_GHI_CHU.
    ENDLOOP.
    ELSE.
    Loop at tt_final_target into wa_final_target.
    MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
    TO C0_Y03HOCSINH_HOCSINH_ID.
    MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
    TO C1_Y03HOCSINH_MA_HOC_SINH.
    MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
    TO C2_Y03HOCSINH_TEN_HOC_SINH.
    MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
    TO C3_Y03HOCSINH_GIOI_TINH.
    MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
    TO C4_Y03HOCSINH_DIA_CHI.
    MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
    TO C5_Y03HOCSINH_GHI_CHU.
    CONCATENATE
    C0_Y03HOCSINH_HOCSINH_ID
    C1_Y03HOCSINH_MA_HOC_SINH
    C2_Y03HOCSINH_TEN_HOC_SINH
    C3_Y03HOCSINH_GIOI_TINH
    C4_Y03HOCSINH_DIA_CHI
    C5_Y03HOCSINH_GHI_CHU
    INTO wa_final_string
    SEPARATED BY lv_delimiter.
    IF sy-tabix EQ 1 AND lv_cnt EQ 1.
    CONCATENATE wa_final_string
    lv_delimiter INTO wa_final_string.
    ELSE.
    CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
    lv_delimiter INTO wa_final_string.
    ENDIF.
    APPEND wa_final_string TO gt_result.
    CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
    C1_Y03HOCSINH_MA_HOC_SINH,
    C2_Y03HOCSINH_TEN_HOC_SINH,
    C3_Y03HOCSINH_GIOI_TINH,
    C4_Y03HOCSINH_DIA_CHI,
    C5_Y03HOCSINH_GHI_CHU.
    ENDLOOP.
    ENDIF.
    free : tt_final_target.
    IF NOT gt_result IS INITIAL.
    CLEAR wa_result.
    LOOP AT gt_result INTO wa_result.
    TRANSFER wa_result TO lv_path.
    ENDLOOP.
    ENDIF.
    REFRESH gt_result.
    *End of main loop for batching
    ENDDO.
    *Close dataset
    CLOSE DATASET lv_path.
    CLOSE CURSOR lv_Y03HOCSINH_dbcur.
    ELSE.
    DATA: lv_mesg TYPE string.
    CLEAR et_file_return.
    et_file_return-type = 'E'.
    CONCATENATE
    'Error occurred when creating dataset' lv_path
    INTO lv_mesg.
    et_file_return-message = lv_mesg.
    Append et_file_return.
    ENDIF.
    ELSE.
    CLEAR et_file_return.
    et_file_return-type = 'E'.
    et_file_return-message =
    'Installed ABAP program does not match interface definition'.
    APPEND et_file_return.
    ENDIF.
    Thanks for help

    r u able to figure it out..........i got the same error .......can someone help me fix this issue

  • Operation could not be completed because an error occured when creating frame 56 (error-1)

    Hi
    I'm trying to export a movie in motion but I keep getting the error "Export Failed. The operation could not be completed because an error occured when creating frame xx (error-1)".  I've tried some of the other suggestions such as preventing app nap, changing the codec used and I've uninstalled, rebooted, and reinstalled motion.  Nothing has worked so far, and it's driving me crazy!
    Can anyone suggest something?  I'd be most grateful.
    Thanks

    Hi GFXZen, thanks for your reply.
    I actually solved by re-exporting the source video, but I'll get to that (to skip, see TL;DR).  In case it helps anybody else I'll answer your questions first.
    The only element present at the majority of the failure points was another video, so there weren't any others to turn off.  Though when I turned off the video and exported, it actually worked (this is what led me to evaluate the source video rather than the motion project).
    Adjusting the export settings did not help me much, I tried h.264, same as source (which  was a .mov), and ProRes 4444: failed.  Tried as a draft: failed.  I didn't want to mess with any of the other render settings because to be honest, I'm not a video editor, so my experience with all of this is severely limited.
    I forgot to mention in the first post that I'd already tried the export on a different machine (one far newer and more powerful): failed.  Dispite googling image sequences, I wasn't really sure how this related to the video, or how to set things up so the audio was preserved, so I skipped that.
    TL;DR
    According to what I googled, it sounded like the video needed to be reindexed/exported/whatever, so I downloaded a program MPEG Streamclip (http://www.squared5.com/svideo/mpeg-streamclip-mac.html) 1.93b8 (as  the stable doesn't support Lion upward).  It's completely free, and when I ran it, worked first time.  I simply opened the video and exported to quicktime, and changed the compression to Apple TIFF.  That was it. 
    There was one unusual thing though, the file I started with was just over 1GB, but the end result was just over 4GB - but visually I couldn't see any loss in quality at all, and it worked in the motion project - which is really all that matters.
    Hope this helps somebody.

  • Error Occurred when creating frame (Error -1)

    I have been working on a project in Motion 5 and recently on my 2009 MBP Intel Core 2 Duo and recently upgraded to an Core i7. I transferred all the project files and media over to the new machine but now when I export I get the error message  "The operation could not be completed because an error occurred when creating frame 346 (error -1).
    I've updated the OS (Mountain Lion) and Motion to the latest versions on both my old MBP and the new one.
    I've spent hours creating this and bought the new machine to get quicker render/export times but now it will not even export at all.
    I'm using a .mov file throughout my project which is at 30 FPS, but my Motion project is set at 24fps, could this be the cause? It didnt seem to matter on the project I was doing on my old MBP.
    Any advice would be great. Thanks

    What version is this? Are you using 10.0.9?

  • The operation could not be completed because an error occurred when creating frame 6105 (error -1).

    I am trying to share a project and after the 3% of sharing the project it appears this message.
    The operation could not be completed because an error occurred when creating frame 6105 (error -1).
    What can I do?? I need some help please!!

    You need to set the FCP X Preferences to count in frames, locate that frame, delete the clip around it and replace with a fresh one.

  • The operation could not be completed because an error occurred when creating frame 19788 (error -1).

    When attempting to build a quicktime movie from my video project on final cut pro I got this message    "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".

    Kathy ...
    Better to post your topic in the Final Cut Pro community here.

  • The operation could not be completed because an error occurred when creating frame 570 (error -1)

    Hi everybody,just started with FCPX and the following occured:
    The operation could not be completed because an error occurred when creating frame 570 (error -1)
    Result is that i can not share to my hard disk.
    If anybody could help me out here....?

    CHange General preferences to show frames. Check what's happenING at the frame number. Maybe replace the shot.

  • The operation could not be completed because an error occurred when creating frame 2829 (error -1)

    I'm getting this error code in Final Cut Pro.  The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it?  This code comes up when exporting. 

    Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1.  I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.

  • The operation could not be completed because an error occurred when creating frame 30256 (error -1).

    When trying to export a project from FCPX, I get this error
    The operation could not be completed because an error occurred when creating frame 30256 (error -1).
    Has anyone any ideas?
    Many Thanks

    Switch your FCP preferences to show frames and see what's happen at that frame number. Try trash any render files. Switch off background rendering. Don't render. Try replacing the clip at the problem area.

  • Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

    I did try in all of them and it doesnt work it apears like that........
    The share operation Master File has failed
    The operation could not be completed because an error occurred when creating frame 608 (error -1).
    and i dont know what to do plese hlp me....
    Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help 

    Double post…

  • Error occurred when creating transfer structure /BIC/CCGS0EC_PCA_1

    Hi Experts,
    While activating th transfer structure  0EC_PCA_1  i am getting the below error
    Error when creating transfer structure /BIC/CCGS0EC_PCA_1 in source system N6A420
    Message no. R3104
    Diagnosis
    An error occurred when creating transfer structure /BIC/CCGS0EC_PCA_1 as an IDoc segment in source system N6A420 .
    Could any one please help
    Thanks  in Advance,
    Nitya

    Hi,
    I have a similar issue on one of my clients, unfortunately they are using PSA method already, however, somewhat interestingly when I switch to Idoc it activates fine?  The log in SLG1 suggests I analyze the log in source system... when I am analyzing the log in the source system?!?!?!?!  Is there another log I am missing? Any ideas anyone?  I did check note 493422 however as I have other extractors that are working fine connected to the same source system I am a bit loathe to implement a global solution?
    Thanks in Advance
    Peter

  • Why do I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1).

    In motion 5, when I go to export - H.264 - I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1). Why and How do I Fix It???

    What version of FCPX ?

  • What does "The operation could not be completed because an error occurred when creating frame 0 (error -1)." mean, and why does it keep happening?

    So I've been trying to export a video file from Motion 5 (and FCPX), and I keep recieving the message "The operation could not be completed because an error occurred when creating frame 0 (error -1)". I've found the problem has something to do with a video file in the project, Ive tried multiple versions of said file, in multiple formats (.mov, h264, etc.), and I keep getting the same result.  The file was originaly a 640x480 wmv file. Any suggestions?

    I ended up figuring out a solution, but I'll get to that in a sec.
    To answer your question, I converted the .wmv file in a program called Media Converter (available in the App store), and converted it to an h.264 file (then later to a .mov file, and then to an .mpg). I could view the file, and work with it in projects, but any project I tried to output with any version of said file, would result in the afor mentioned message, with the same results in FCPX (and Compressor 4 as well).  I tried multiple frame rates, resolutions, files types, re-converting the file, all with no luck.  My impression from said experiments, and reading other discussions was that it was a corrupt file. 
    Then I got frisky...and a little desperate. I brought the converted file (the .wmv to .mov) into Motion 4... and an export worked first try.  So I exported a pro-res file from Motion 4, and used that file in the already built Motion 5 project, and voila! 
    So, who knows what that means in real terms, as for the whats and whys.

Maybe you are looking for