Error occuring while creating a Delivery for Stock transport order

Hi,
I am getting error while creating the delivery for thr stock transport order.The error message is given below.
                                                                                Error Log for coll. run 0001248218                                                                               
4       6000038321 000010 Only 0 ST of material F784100 available                                   
     4       6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted. 
     4       6000038321 000020 Only 0 ST of material F784100 available                                   
     4       6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted. 
     4       6000038321 000030 Only 0 ST of material F784100 available                                   
     4       6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.                                                                               
The stocks are present in the plant.
Can anyone help me to solve this issue?
Thanks
Srinivasan

Hi,
Check in
SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
Check for 641 or 647,there is a SD rule assigned.
Regards,
Deepak.

Similar Messages

  • Save Query - An error occurred while creating connection strings for the query

    A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.

    I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.

  • Automatic delivery for stock transport order

    Hi,
    with ECC6 you have the possiblity to automatically create the delivery out of the stock transport order (STO) using the following customizing steps in SPRO:
    Materials Management ->Purchasing->Purchase Order->Set up Stock Transport Order->Activate Automatic Delivery Creation and CRM Billing
    Materials Management ->Purchasing->Purchase Order->Set up Stock Transport Order->Activate Automatic Delivery Creation for PO Type and Shipping Point
    We want to use a batch job that runs ME59N to autmatically convert the purchase requisitions to STO and deliveries. While testing we found out that ME59N gives a warning when the availability check in the STO is running in case there is not enough stock. But you still can create STO and delivery.
    In case you only create a STO and put it in VL10B to create the delivery it will only create delivery items with the quantities that are available in warehouse. So no stock means no delivery at that time.
    Is it also possible using ME59N to
    a) not create STO and delivery in case there is no stock
    b) only create STO and no delivery in case there is no stock
    Cheers
    mickey

    Hi,
    Setting to error message not possible as this would cause all STOs not be convertered where no stock is available. But we need this functionality only for one specific process.
    Omit faulty items we also tested and did not provide the result we need. It is related to faulty purchase requisition items.
    Cheers
    Mickey

  • Error occured while creating site collection for the first time in SP2013

    While creating a new site collection in SharePoint 2013, I need to do atleast 4 times " Go back to Site" begore it appears properly. Could you please let me know why this error is occuering while we create site collection for the first time.
    Is it aknown issue or due to RAM contraints.I am using 16 GB of RAM in Web tier.

    You can get by with 16 GB of RAM so I am guessing that is not the cause.  Although, you could verify your memory utilization during the process.  As long as you don't exceed 95% you should be fine.  Next time, I would instead look up the
    error in the ULS logs using the correlation id and see if you can get more details of what is causing the error.
    Corey Roth - SharePoint Server MVP blog:
    www.dotnetmafia.com twitter: @coreyroth |
    SP2 Apps

  • Minimum order qty for Stock transport orders

    Hello
    I wonder if there is any way to make the following fields from the Sales org 1 view in the material master to apply on Stock transport orders (ME21N, with subsequent delivery created in VL10B):
    Minimum order qty
    Minimum delivery qty
    Delivery unit
    As of now in our system, it only works for Sales orders and related deliveries. But not for Stock transport orders with a supplying plant.
    Also, if there is any other way to implement minimum order qty funcitonality and delivery for Stock transport orders, pls advice.
    Thanks,
    OT

    Hello
    We are in an intracompany business case. The supplying and recieving plant are in the same company.
    The situation is as follows: we are planning all replenishment manually without any involvement of MRP.
    What we would like to achieve is the same functionality as of the minimum order/delivery quantities material master fields in the material master.
    So when the planner creates the stock transfer order, he keys in supplying plant, material and quantity manually, then the warning message about the minimum order qty should appear.
    So far I have not found any way to do this. Any ideas are greatfully received.
    BR,
    OT

  • An error occured while creating the original attribute for message no26 296

    Hi All,
              I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
    An error occured while creating the original attribute for
    Message no. 26 296
    Diagnosis
    An error occured while creating an original in the Knowledge Provider.
    System Response
    The original could not be created.
    Procedure
    Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
    Please let me know what configs i am missing ...
    Thanks in advance
    regrds
    pushpa

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn't complete the backup to "G-RAID". to complete backup. An error occurred while creating the backup folder.

    Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn’t complete the backup to “G-RAID”. to complete backup. An error occurred while creating the backup folder."
    Any idea what I should do?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the search box.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • An error occured while creating the original attribute for

    Hi All,
    We encounter  this error in  "An error occured while creating the original attribute for " DMS  very often when a user edits a file & tries to check in.
    I searched the forums & realized that this is caused by the inconsistencies in the KPRO & DMS server and removing these
    inconsistencies will repair this issue.
    I have been deleting the inconsistencies using DMS reports DMS_KPRO_READ & DMS_KPRO_CHECK1 and it resolves the error
    so the file is unlocked. But I haven't been able to figure out the ROOT cause of this issue.I couldn't find any information on the root cause of this issue. What can be done to fix this error permanently.
    Regards
    -Neha

    Hi Neha,
    Please go to transaction SE16 and enter 'SDOKPROP' as table. Then enter 'DMS*' in the field PROP_NAME and press F8. Now all DMS related entries should be displayed to you. Please compare them with the following entries displayed in the attached screenshot and maintain the missing entries.
    DMS_ACTIVE_VERSION 00 Active Version
    DMS_APPLICATION 00 Logical application
    DMS_CHECKOUT_USER 00 Checkout User
    DMS_CREATE_AUDIT 00 Generate new version of the original
    DMS_DEFAULT_LANGUAGE 00 Default Language
    DMS_DELETEABLE 00 PHIO deletable
    DMS_DOC_KEY 02 IWB_DMS01 DMS_DOCKEY Document info record
    DMS_DOC_VERSION 00 Version of relevant document
    DMS_DRAW_APPNR 00 Application number from DRAW
    DMS_DRAW_DTTRG 00 Data carrier from DRAW
    DMS_DRAW_FILEP 00 File name from DRAW
    DMS_FILE1 00 File name(firstpart)
    DMS_FILE2 00 File name(secondpart)
    DMS_FILE3 00 File name(thirdpart)
    DMS_FILE_ID 00 GUID that points to table DMS_PHIO2FILE
    DMS_FRMTXT 00 Format description, ID of additional file
    DMS_MUP_CAT 00 Markup category
    DMS_MUP_FLAG 00 Markup flag
    DMS_ORDER 00 Sequence of additional files
    DMS_STATUS 00 Document status
    DMS_STATUSNR 00 Number in status protocol
    DMS_STATUSNR_X 00 References to Status Log
    Please pay attention that all entries are typed well and that there are no spelling errors. If all these values are maintained correctly in table SDOKPROP the dump and the error message should no longer appear.
    For further information you can also see the corresponding SDN WIKI page under
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/error26296in+CV01N
    Regards,
    Ravindra

  • TS1550 Time Machine worked fine w. new HD for 16 backups, but started giving this mssg: [TIME MACHINE COULDN'T COMPLETE THE BACKUP TO "TOSHIBA EXT" ...An error occurred while creating the backup folder]

    Time Machine worked fine w. new HD for 16 backups, but started giving this mssg: [TIME MACHINE COULDN'T COMPLETE THE BACKUP TO "TOSHIBA EXT" ...An error occurred while creating the backup folder]

    Make sure your hard drive is formatted properly for the operating system installed.  Go to Apple menu -> About This Mac to determine what it is.  You posted to the 10.5 forum, but your signature says you have 10.9.  Here is the tip on what formatting supports what operating systems:
    https://discussions.apple.com/docs/DOC-3003

  • Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

    I have tried all the resets, the firmware is the latest version, the green light is on.
    But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
    Any ideas?

    Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
    Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
    Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
    Reset the TC again.. sorry.. !! You're welcome ... done.
    Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
    You need to open the network preferences to find out. Yep - that's good ...
    ****** I then reconnect the TC WAN to the router - is this right?
    And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
    The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
    Then open the airport utility and you should be able to setup the TC.
    Do as little setup as possible and then run the TM backup and see how it goes.
    I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
    So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
    I named network RFG, named device RFGTC.  RFG network shown as IP 192.168.0.72
    Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
    I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link.  All are effectively connected to the BT Homehub - is there a conflict there?
    Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
    And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

  • Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

    I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
    I also configured excel services correctly. Everything works fine but the powerview doesn't work!
    While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
    to access the data source."
    error detail: 
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
    to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
    I Appreciate in advance.

    Hi Ali.y,
    Based on the current error message, the error can be related to the
    Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
         1. The C2WTS Windows service and C2WTS SharePoint service are both running.
         2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
         3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A).  When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
    A trusts Domain B.
    In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
    Services server.
    To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
    • Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
    Note: Fully_Qualified_domainName is a placeholder for the FQDN.
    • Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
    For more information, please see:
    How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • An error occured while creating the new dataset Could not get type informat

    Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
    I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
    Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
    My Path variable list the following:
    C:\app\Administrator\product\11.1.0\client_1;
    C:\app\Administrator\product\11.1.0\client_1\bin;
    C:\oraclexe\app\oracle\product\10.2.0\server\bin;
    C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
    C:\Program Files\Borland\BDS\4.0\Bin;
    C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
    C:\PROGRA~1\Borland\vbroker\jre\Bin;
    C:\PROGRA~1\Borland\vbroker\Bin;
    C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
    C:\WINDOWS\system32;C:\WINDOWS;
    C:\WINDOWS\System32\Wbem;
    c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
    C:\Program Files\java\jdk1.6.0_07\bin.
    Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
    Also noted that while deploying at client site I started gett'n this error:
    "Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
    Is it due to change in the production machine? Any help in this regard is greatly appreciated.

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • An error occurred while creating a Page Server subprocess.

    I am using XI R2 SP5 on solaris.
    When we try to view any report on demand or schedule any report that has a parameter, the following error comes back:
    An error occurred while creating a Page Server subprocess.
    I have tried restarting the services. I have tried creating a new page server. It behaves the same way. In other online forms, I've seen with this error message, people have talked about fixing it by installing SP2 or by uninstalling and reinstalling everything. We're at SP5, so we should have anything that was fixed at SP2. An uninstall and then reinstall would be a nightmare given the amount of use on this system.
    Can anyone recommend anything at all? I'm about to have our unix admins reboot the server, but that is really nothing more than a stab in the dark. I saw someone else in an online posting claim that a reboot fixed the problem, but I've only seen that once.

    checked this SAP Note?
    1204013 - Error: "The Page Server is unable to create a child process" when viewing a Crystal report in InfoView on Solaris
    Symptom
    When trying to view a Crystal report in BusinessObjects XI Release 2 InfoView on Solaris, the following error message appears:
    "The Page Server is unable to create a child process"
    In the syslogs, you see the following error messages:
    "An error occurred while creating a Page Server subprocess."
    "The function PEOpenEngineEx failed. Reason: Report engine not opened."
    "Internal error for dll procreport."
    "Unable to load dll procreport."
    "Internal Job Server error."
    Cause
    The following file in the MainWin registry has become corrupt:
    bobje/enterprise115/solaris_sparc/crpe/mw/registry/core_data/servername/.mw/hklm_sunos.bin
    This has become corrupt due to the web application server running under a different account than the BusinessObjects Enterprise applications.
    Resolution
    Restore the hklm_sunos.bin file using a backup of that file. The backup file must be from before the corruption occurred. Also ensure that your web application server and BusinessObjects Applications are running under the same user account.

  • A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

    Need help.  I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client.  It just prompts for password but will not
    take it. I'm sseeing this on my front end server multiple times:
    A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
    Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
    All my certs are good coming from internal CA.  My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers.  Issue only occurs when trying to connect using a lync 2013 client.
    1 Login: FAIL (hr = 0x1) 
    this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
    1.1 Get-NewWebTicket: FAIL (hr = 0x1) 
    CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
    1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
    1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
    1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
    Rich

    Hi,
    Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
    For the detailed IIS configuration, please check:
    http://technet.microsoft.com/en-us/library/gg412871.aspx
    As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
    lyncdiscoverinternal.<sipdomain> Host (A) record and then
    lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
    More details:
    http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • "An unexpected error occurred while creating a custom installer."

    All;
    I—and I've seen several others in older posts—have been reported received the error "An unexpected error occurred while creating a custom installer" while attampting to build a customer ARD client installer.  My guess is that this is do to a issue related to 10.8.X (10.8.4, in my case) based console Mac but I cannot confirm this. I have verified that there are no outstanding OS, client or application updates or hot fixes, as well.
    Has anyone built an successful installer from Mountain Lion-installed Mac?  Is there any know workarounds?
    Thanks in advance, for any help. 

    Have the exact same problem.
    iMac running 10.8.4
    Got through the steps of creating a custom client installer.
    if I choose not to customize and just save an installer I don't get the error but it creates a file of Zero bytes in size.
    If I chose to configure, when I try to save I get:
    An unexpected error occurred while creating a custom installer. Please try again....
    Console log reports:
    9/1/13 12:32:29.603 AM Remote Desktop[1306]: open on /private/tmp/RemoteDesktopClientInstaller_HEATyAJ5CR/extracted/RemoteDesktopCli ent.pkg/Scripts/RemoteDesktopClient.pkg: No such file or directory
    I have tried to save this in several location, with no effect on the error or the information logged, with the exception of the name of the temp directory that DOES contains the file (zero bytes):
    RemoteDesktopClient.pkg
    Need help with this someone...!
    APPLE...I JUST purchase this Applciation for $80.....it just flat out does not work....

Maybe you are looking for

  • Creative Cloud Packager 1.4 "Ooops something has gone wrong, please try again"

    I'm on OSX 10.8.5 and only get that message when I open creative cloud packager 1.4. I've downloaded a new version and reinstalled. Rebooted. Firewall is open, nothing in my hosts file. It worked the other week and AFAIK nothing's changed. I need to

  • Need help on xslt transformation

    Hi , I am working on a xslt transformation and  I am finding it difficult to implement the transformation. The scenario is as below. Input format :- A B B B 4 5 A B B A B B B Output format :- A B B B (since after A there were 3 B's before the next A)

  • Is it possible to insert a url into a design I have created in Photoshop?

    Is it possible to create an image with multiply links in it or how can I separate my design in Photoshop so that I can assign the links to each element in our email marketing system?

  • Computation in Bex

    Hi friends ,                  Is this possible in Bex 3.5. I have a computation to be done = 3 +2/20/2008                                                 = 5/31/2008 and not 2/23/2008. Right now when I add this I get like this 2/23/2008 but what I wa

  • Mute/unmute volume controls by LabVIEW pragramaticlly ??

    Hi all, Can somebody help me to figure out how I can mute and unmute different volume controls using winmm.dll. I have come across this post ( see below) that shows how to control individual volume controls but I am more interested how to mute or unm