Error OCCURRED: Failed to connect to LiveCycle server via RMI. Make sure that the server is running
I have installed LifeCycle trial version .
and trying to convert pdf to rtf
using following initialization
Properties connectionProps = new Properties();
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_EJB_ENDPOINT, "jnp://localhost:1099");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,Service ClientFactoryProperties.DSC_EJB_PROTOCOL);
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
//Create a ServiceClientFactory instance
ServiceClientFactory factory = ServiceClientFactory.createInstance(connectionProps);
but i am getting error like following though i have started jboss which is inside lifecycle folder by run.bat
ERROR IS:Error OCCURRED: Failed to connect to LiveCycle server via RMI. Make sure that the server is running and accessible to this client.
May be you could use "netstat" or other tools like "ActivePorts" to ensure that ports established are correct.
Also try if jnp://127.0.0.1:1099 works or not, if ports are correct.
Similar Messages
-
Adobe Reader 9.1 - Fatal Error : Acrobat failed to connect a DDE server
Hi Everyone,
I have some users telling me that when they try to open a pdf attachment in Outlook 2007. Nothing happens. The system just sits there as if you did not click on the attachment. If you wait long enought a popup box from adobe reader comes up and says:
Fatal Error
Acrobat failed to connect a DDE server.
All the PDFs are very simple, just simple scanned images or converted over from a document into a PDF.
I've tried repairing the install and still had no luck - same behaviour. The only way the pdf opens is if we go into task manager and close the AcroRd32.exe process or logoff and log back in.
If it helps, the most recent system change was the upgrade to IE7 and a new anti-virus software.
Thanks,
KEvinNo solution I am afraid but same problem, running full version of AVG and problem hit immediately after Adobe Reader 9.1 upgrade. Pretty darn sure problem is in the upgrade but the relevant Restore Point was overwritten before I figured it out. Any advice welcome.
-
Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here? -
Hi,
Im unable to open the RPD online getting following error.
Note: Im not done any changes. Its works good till yesterday EOD.
Error:
[NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM.
[NQSError:37001] could not connect to the oracle BI server instance..
Kindly help me to fix this issue.Hi,
Could you access the answer side.
Could you see the reports.
Do one thing, take a back up of NQS config file from <Oracle Location>\instance\instance1\config\obiserver folder\nqsconfig.ini file.
Copy nqs config file if you have already have a back up.
Restart the services and try once.
http://mkashu.blogspot.com
Regards,
VG -
please help.
i was trying to update my iphone to ios 6 thru itunes but there was an error message that my phone is corrupted while downloading and that i make sure that there is a network connection and to retry downloading.
no software update available in the general settings...Before beginning the download, try temporarily disabling your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with the secure OS your computer is running.
-
i need a help. I am new in company and have to solve this problem.
My colleague did a migration from Small Business server 2003 to Foundation 2008, about 1 year ago. After few days, he got this error message in title. Server turn off about once a month. He worked following:
joined new server Foundation to the Domain
dcpromo on new Server
migration (he said that he worked step-by-step with tutorial)
demote on old Server SBS 2003
disconnect old server from domain. This old is not in function now.
New server have just 3 computer accounts. The Forest functional level is Server 2003.
I've did dcdiag:
C:\Users\Administrator>slmgr.vbs /dli
C:\Users\Administrator>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = server2008
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SERVER2008
Starting test: Connectivity
......................... SERVER2008 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SERVER2008
Starting test: Advertising
......................... SERVER2008 passed test Advertising
Starting test: FrsEvent
......................... SERVER2008 passed test FrsEvent
Starting test: DFSREvent
......................... SERVER2008 passed test DFSREvent
Starting test: SysVolCheck
......................... SERVER2008 passed test SysVolCheck
Starting test: KccEvent
......................... SERVER2008 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SERVER2008 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SERVER2008 passed test MachineAccount
Starting test: NCSecDesc
......................... SERVER2008 passed test NCSecDesc
Starting test: NetLogons
......................... SERVER2008 passed test NetLogons
Starting test: ObjectsReplicated
......................... SERVER2008 passed test ObjectsReplicated
Starting test: Replications
......................... SERVER2008 passed test Replications
Starting test: RidManager
......................... SERVER2008 passed test RidManager
Starting test: Services
......................... SERVER2008 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x8000001D
Time Generated: 03/08/2012 09:59:45
Event String:
The Key Distribution Center (KDC) cannot find a suitable certificate
to use for smart card logons, or the KDC certificate could not be verified. Sma
rt card logon may not function correctly if this problem is not resolved. To cor
rect this problem, either verify the existing KDC certificate using certutil.exe
or enroll for a new KDC certificate.
An error event occurred. EventID: 0xC0001B61
Time Generated: 03/08/2012 10:09:56
Event String:
A timeout was reached (30000 milliseconds) while waiting for the Liv
eUpdate service to connect.
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/08/2012 10:09:56
Event String:
The LiveUpdate service failed to start due to the following error:
......................... SERVER2008 failed test SystemLog
Starting test: VerifyReferences
......................... SERVER2008 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : BREG
Starting test: CheckSDRefDom
......................... BREG passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... BREG passed test CrossRefValidation
Running enterprise tests on : BREG.local
Starting test: LocatorCheck
......................... BREG.local passed test LocatorCheck
Starting test: Intersite
......................... BREG.local passed test Intersite
C:\Users\Administrator>
I did nslookup:
C:\Users\Administrator>nslookup
Default Server: UnKnown
Address: ::1
and this:
C:\Users\Administrator>ntdsutil
ntdsutil: roles
fsmo maintenance: connections
server connections: connect to server server2008
Binding to server2008 ...
Connected to server2008 using credentials of locally logged on user.
server connections: q
fsmo maintenance: select operation target
select operation target: list roles for connected server
Server "server2008" knows about 5 roles
Schema - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=BREG,DC=local
Naming Master - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
PDC - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Si
tes,CN=Configuration,DC=BREG,DC=local
RID - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Si
tes,CN=Configuration,DC=BREG,DC=local
Infrastructure - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site
-Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
select operation target:
Did also slmgr.vbs /dli and got:
name:Windows Server(R) ServerWinFoundation edition
Description: Windows operating System - Windows Server(R),
OEM_COA_NSLP channel
Partial product key:.......
License Status:Licensed
thanks for help, in advanceI forgot to say that it is the only DC in the domain.
and this is DNS test
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine server2008, is a Directory Server.
Home Server = server2008
* Connecting to directory service on server server2008.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=BREG,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=BREG,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SERVER2008
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... SERVER2008 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SERVER2008
Test omitted by user request: Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Test omitted by user request: FrsEvent
Test omitted by user request: DFSREvent
Test omitted by user request: SysVolCheck
Test omitted by user request: KccEvent
Test omitted by user request: KnowsOfRoleHolders
Test omitted by user request: MachineAccount
Test omitted by user request: NCSecDesc
Test omitted by user request: NetLogons
Test omitted by user request: ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Test omitted by user request: Replications
Test omitted by user request: RidManager
Test omitted by user request: Services
Test omitted by user request: SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: VerifyReferences
Test omitted by user request: VerifyReplicas
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
See DNS test in enterprise tests section for results
......................... SERVER2008 passed test DNS
Running partition tests on : ForestDnsZones
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : DomainDnsZones
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : Schema
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : Configuration
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : BREG
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running enterprise tests on : BREG.local
Starting test: DNS
Test results for domain controllers:
DC: server2008.BREG.local
Domain: BREG.local
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS
Microsoft Windows Server 2008 R2 Foundation (Service Pack level: 1.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter
[00000007] Intel(R) 82566DM-2 Gigabit Network Connection:
MAC address is 00:19:99:86:E9:62
IP Address is static
IP address: 192.168.1.250
DNS servers:
192.168.1.250 (server2008.breg.local.) [Valid]
127.0.0.1 (server2008.breg.local.) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders are not configured on this DNS server
Root hint Information:
Name: a.root-servers.net. IP: 198.41.0.4 [Valid]
Name: a.root-servers.net. IP: 2001:503:ba3e::2:30 [Invalid (unreachable)]
Name: b.root-servers.net. IP: 192.228.79.201 [Valid]
Name: c.root-servers.net. IP: 192.33.4.12 [Valid]
Name: d.root-servers.net. IP: 128.8.10.90 [Valid]
Name: d.root-servers.net. IP: 2001:500:2d::d [Invalid (unreachable)]
Name: e.root-servers.net. IP: 192.203.230.10 [Valid]
Name: f.root-servers.net. IP: 192.5.5.241 [Valid]
Name: f.root-servers.net. IP: 2001:500:2f::f [Invalid (unreachable)]
Name: g.root-servers.net. IP: 192.112.36.4 [Valid]
Name: h.root-servers.net. IP: 128.63.2.53 [Valid]
Name: h.root-servers.net. IP: 2001:500:1::803f:235 [Invalid (unreachable)]
Name: i.root-servers.net. IP: 192.36.148.17 [Valid]
Name: i.root-servers.net. IP: 2001:7fe::53 [Invalid (unreachable)]
Name: j.root-servers.net. IP: 192.58.128.30 [Valid]
Name: j.root-servers.net. IP: 2001:503:c27::2:30 [Invalid (unreachable)]
Name: k.root-servers.net. IP: 193.0.14.129 [Valid]
Name: k.root-servers.net. IP: 2001:7fd::1 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 199.7.83.42 [Valid]
Name: l.root-servers.net. IP: 2001:500:3::42 [Invalid (unreachable)]
Name: m.root-servers.net. IP: 2001:dc3::35 [Invalid (unreachable)]
Name: m.root-servers.net. IP: 202.12.27.33 [Valid]
TEST: Delegations (Del)
Delegation information for the zone: BREG.local.
Delegated domain name: _msdcs.BREG.local.
DNS server: server2008.breg.local. IP:192.168.1.250 [Valid]
TEST: Dynamic update (Dyn)
Warning: Failed to add the test record dcdiag-test-record in zone BREG.local
[Error details: 9017 (Type: Win32 - Description: DNS bad key.)]
Test record dcdiag-test-record deleted successfully in zone BREG.local
TEST: Records registration (RReg)
Network Adapter
[00000007] Intel(R) 82566DM-2 Gigabit Network Connection:
Matching CNAME record found at DNS server 192.168.1.250:
cb30439d-35e0-4add-ae6c-e7f281295520._msdcs.BREG.local
Matching A record found at DNS server 192.168.1.250:
server2008.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.221dc40b-9d51-48cf-a3a3-e3daf251197f.domains._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._udp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kpasswd._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.gc._msdcs.BREG.local
Matching A record found at DNS server 192.168.1.250:
gc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_gc._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.pdc._msdcs.BREG.local
Matching CNAME record found at DNS server 192.168.1.250:
cb30439d-35e0-4add-ae6c-e7f281295520._msdcs.BREG.local
Matching A record found at DNS server 192.168.1.250:
server2008.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.221dc40b-9d51-48cf-a3a3-e3daf251197f.domains._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._udp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kpasswd._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.gc._msdcs.BREG.local
Matching A record found at DNS server 192.168.1.250:
gc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_gc._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.pdc._msdcs.BREG.local
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 2001:500:1::803f:235 (h.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:1::803f:235
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:500:2d::d (d.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:2d::d
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:500:2f::f (f.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:2f::f
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:500:3::42 (l.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:3::42
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:503:ba3e::2:30 (a.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:503:ba3e::2:30
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:503:c27::2:30 (j.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:503:c27::2:30
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:7fd::1 (k.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:7fd::1
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:7fe::53 (i.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:7fe::53
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:dc3::35 (m.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:dc3::35
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 128.63.2.53 (h.root-servers.net.)
All tests passed on this DNS server
DNS server: 128.8.10.90 (d.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.112.36.4 (g.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.168.1.250 (server2008.breg.local.)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS delegation for the domain _msdcs.BREG.local. is operational on IP 192.168.1.250
DNS server: 192.203.230.10 (e.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.228.79.201 (b.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.33.4.12 (c.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.36.148.17 (i.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.5.5.241 (f.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.58.128.30 (j.root-servers.net.)
All tests passed on this DNS server
DNS server: 193.0.14.129 (k.root-servers.net.)
All tests passed on this DNS server
DNS server: 198.41.0.4 (a.root-servers.net.)
All tests passed on this DNS server
DNS server: 199.7.83.42 (l.root-servers.net.)
All tests passed on this DNS server
DNS server: 202.12.27.33 (m.root-servers.net.)
All tests passed on this DNS server
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: BREG.local
server2008 PASS PASS PASS PASS WARN PASS n/a
......................... BREG.local passed test DNS
Test omitted by user request: LocatorCheck
Test omitted by user request: Intersite -
I get this error: Acrobat failed to connect to DDE Server. What's wrong and how do I fix it?
Why doesn't Adobe have tech support? I have this error and need to have it solved. Adobe will not open up when I hit a pdf file? Acrobat Installation & Update Issues
Hi Ammjr,
Please let me know what version of Acrobat you are using and on which OS?
Try Updating Acrobat to the latest patch and check.
Also try repairing Acrobat from the 'Help' menu and check.
Was this working fine for you before?
Regards,
Rave -
Fatal error Acrobat failed to connect to DDE Server
I just purchased the Adobe Acrobat xI Pro & installed. I get a Fatal Error message when I try to open the program. I am running Windows7. What is the problem?
Hi HP2,
Try launching the application as Administrator and check.
Also update Acrobat to the latest patch i.e. v11.0.08 and check.
You might also want to repair Acrobat from the Control Panel> programs and check.
Regards,
Rave -
Did a LOT of troubleshooting, but not finding suitable solution, still getting same error i referred all below links but not working for me.
"http://blogs.msdn.com/b/how24/..."
"http://social.msdn.microsoft.com/Forums/..."
"http://stackoverflow.com/questions/.."
"http://tomvangaever.be/blogv2/2013/06/..."
I am using "Microsoft Visual Studio Professional 2012".
Can anyone please tell, How can I achieve????
sharad patilHi,
Sorry for my delay.
It seems that this issue was more related with Visual Studio, I suggest you move to Visual Studio Development Forum, the forum link is:http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio
, may be you'll get solution on that forum.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Windows 7- Adobe Reader X 10.1.4- "An Internal Error Occurred"-"Fatal Error, Adobe Failed to connect
I downloaded Adobe Reader X 10.1.4 lately and I could not open any pdf file I have and gave a message, "An Internal Error Occurred. I tried to change it under the Program Features for updates and fixes and re-started my computer. Then I tried to open again a pdf file and a message " Fatal Error", Adobe failed to connect to DDE Server. What do I need to do to fix this up? Is Adobe even aware of this?
If all things fail and you are not getting a resolution to this. Delete the Windows 7 User profile. C:\Windows\Users\<user name>
Reboot, then recreate the user profile by logging on as the User. You are not done yet.
Logoff and log back as Administrator and go to Regedit and manually delete the user profile from the Registry.
Go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\ProfileList\[SID] look for the User name.bak
Delete it. Then reboot and go back and log on as the user. That should fix it.
If you get lost with those instructions on how to delete user profile. Go to this link:
The best way to delete the user profile from a domain joined Windows PC - fixedByVonnie -
Error in MDM - EP integration : "Failed to connect to MDM server. ....."
Dear SDN,
I m in middle of configuring the MDM and EP integration.
<u>EP Version Info :</u>
J2EE Engine 6.40 PatchLevel 108290.313
Portal 6.0.20.0.0
BP has been installed.
We are able to view MDM system and MDM search IViews in the Wizards in the portal.
<u>MDM Version Info</u> : MDM 5.5 SP 04
I come across the following error :
<b>Step 4: An error has occurred
Failed to connect to MDM server. Check your system. The server may be down or there may be an error in one or more of your system parameters.</b>
System parameters are Server name and pwd .
This parameters are used to start the server and pwd for accessing the server while mounting the server.
Also at the same time, my MDM server is running and repository is shown loaded and running.
Kindly suggest what should have been missed out from our side or some way we can make sure that error does not occur.
Please help.
Regards,
Chandani Shah.Hi Chandani,
in Portal clik on Personalization, and in User Mapping you need to map the MDM repository user (may be Admin)..... then try another time.
Please, check the BP version in order to unserstand if it is the rigjt version for your MDM.
Hoper this help you.
Regards,
Vito -
Fatal Error Acrobat failed to connect to a DDE server?
Need help, Adobe Acrobat Pro 11 will not open. Fatal Error Acrobat failed to connect to a DDE server.
Hi joanne36657607,
I a sorry that you are experiencing this issue & will be happy to help you.
Please provide some more information in order to diagnose the issue correctly.
1) Which Operating System you are using.
2) Exact version of Acrobat.
3) What were you doing when this problem start occurring.
4) Have you tried re-installing the product, if not, then please try it.
Regards,
Aadesh -
Fatal Error: Failed to connect to DDE server
I've read the other posts about this problem, but none seem to fit my situation.
This happened while trying to use a 3rd party program Typhoon AutoRun to test autorun files for CDs of our Ebooks that we're burning. Each of these Ebook CD projects has 6 PDF files to open; 1 Mobipocket, 1 HTML. Of course, the only problem occurs with the PDF files.
Let me start by saying that I was using Acrobat 6 until September, when we upgraded to CS 4, and never experienced this issue.
And after installing Acrobat Pro 9, I hadn't any difficulty until TODAY.
Order of events: I opened a past completed project in Typhoon Autorun to test the file before burning to CD.
When I clicked on one of the PDF document buttons, the first thing that happened was Adobe Active X 9 attempted to run. BUT the Active X failed to install on the first attempt:
"Error 1904.Module
C:|WINDOWS\system32\Macromed\Flash\Flash9f.ocx failed to register. HRESULT -2147220473. Contact your support personnel."
The Typhoon Autorun program continued operating and opened the project's PDF documents without any difficulty -- all 6 opened, one after the other, when I clicked on their buttons.
I closed out the error message, closed out the Typhoon Autorun project I was testing to work on another Typhoon Autorun project. When I had that one finished, I tested it as I had the one previous.
This time when I clicked on a button to open one of the PDF button, the Adobe Active X 9 program loaded and INSTALLED successfully.
THEN, the PDF document opened. But when I attempted to open any of the other 5, they did nothing. I double-checked my Typhoon Autorun project files, but all of the settings were correct. I tried testing my project again. This time NONE of the PDF files would open.
I closed the Typhoon Autorun program and attempted to open Acrobat Pro 9 immediately after. I tried clicking on the shortcut button several times with no result. After several minutes, literally, I received the "Fatal Error: Failed to connect to DDE server" --- actually, several instances of that message to correspond with all the times I'd attempted to open the program.
I shut down my computer, rebooted, reopend Typhoon Autorun and tried to test a different project.
Again, Adobe Active X 9 installed. (If it's already installed why is it reinsalling???)
And again, only 1 PDF file would open. Then none of the others. I shut down Typhoon Autorun and tried to open Adobe Acrobat again, and it wouldn't open.
The problem seems to be appearing when Adobe Active X 9 installs, and it's doing that automatically, without asking.
I never had this problem when I used Adobe Acrobat 6 (I'm really beginning to regret upgrading)
I never had this problem before this Active X 9 started installing.
Sandra DugasNo solution I am afraid but same problem, running full version of AVG and problem hit immediately after Adobe Reader 9.1 upgrade. Pretty darn sure problem is in the upgrade but the relevant Restore Point was overwritten before I figured it out. Any advice welcome.
-
I can not open any pdf file... . Fatal error. Acrobat has failed to connect a DDE server
fatal error
Acrobat has failed to connect a DDE server....
What can I do?Did you register and activate Acrobat? I don't remember the DDE issue off hand, but it should not be occurring with the regular Acrobat installation.
-
Adobe Reader won't open pdfs. Message : Fatal Error: Acrobat failed to connect to a DDE server.
What can I do to restore my Adobe Reader to working order. Worked fine yesterday. Today, won't open any pdf docs in Adobe or saved on the computer. Message keeps popping up: Fatal Error: Acrobat failed to connect to a DDE server.
DDE stands for Dynamic Data Exchange, check this threat
http://forums.adobe.com/message/1877300#1877300
Maybe you are looking for
-
Issue on migration of tax depreciation balances for group assets
Dear Experts, My client is using group assets for tax depreciation report India. The SAP implementation was done in 2006 during the data migration the client was not clear of the values both individual asset wise and group asset wise to migrate to ta
-
Open a Text File in a JTextPane
Hi, Can anyone please help me with this stupid problem. I want a specific .txt file to be opened in a JTextPane when the application is started. If anyone has any suggestions it would be really appreciated. Thanks. Martin
-
Passing the name of a table to a procedure
Can anyone tell me how you can pass the name of a table to a procedure ? I am trying to write a generic procedure that will have the table name and the fieldname passed to it :- as in :- Select Fieldname FROM Tablename; null
-
I own an iPod Touch 4g. Now i'm planning to buy iPod Touch 5g. Is it possible for me to register the new iPod with existing Apple ID so that i can transfer the apps from my existing account to my new Ipod 5g?
-
IPhoto Library seems far too large
Hi, When I first loaded my images into iPhoto I thought what I wanted was to preserve the original file structure i.e. I keep all my images in a 'Digital Photos' folder, then broken down by year and date. So when I imported the library to iPhoto I un